Deal with teststand message popup
when I add a message popup in my sequence,I need two button: Ok(button1) and Cancel(Button2).and set timeout.
My question is like this; I need get the status when execute,if uesr click ok,the sequence should go to next step,the other stauts,the sequence should abort executing.
example:
Message Popup
if(RunState.Sequence.Main["Message Popup"].Button1Label=="OK")
call sequence //this action need execute when click "OK"
else
break //this is a action ,without any connection of message popup
end
but no matter what button I click ,the sequence always execute break,that's means the if condition can't get the status of message,where is my error.
any one help me ,thanks very much
duplicate post see the following link
http://forums.ni.com/ni/board/message?board.id=330&message.id=21602&jump=true
Regards
Ray Farmer
Similar Messages
-
How do you deal with error message when downloading movie on iPad? It was 75% complete.
How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.
I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.
-
The way I deal with error message 1417, 1418 and 1428
Firstly, sorry for my poor English, but I would like to share with you my experience, and hope that it may helps you.
Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
From the above experience, I would like to share it with the user the following:-
1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
2. Try to connect the iPod with a computer, switching between USB and Firewire
3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
I hope the following works in your case as I did.a pop up error message says itunes couldnt be configured
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply. -
How to deal with HOLDING Messages in Message Monitoring
Hi Experts,
The messages are going into Holding statu whenever we try to execute a scenario with multi-mapping or doing a message split.these messages are holding since months and are never sent,even if we try to resend it.Any help on this will be appreciated greatly thank you.Holding means EOIO message waiting to execute previous message in queue.
1. Delete all messages
2. Delete files from directory
3. Change QoS from EOIO to EO.
If you want to use EOIO then check everything again and process message successfully you can also assign separate queue for same.
Regards,
Gourav
<i>Reward points if it helps you.</i> -
Help with dealing with Error messages I keep getting
I am new to Java Programming and would appreciate some help please. I keep getting this errors each time I compile my program and I have no clue what to do about it.... can anyone help?
cannot find Symbol- method getChar()
Infact, I don't mind if someone will please take a look at this program I have written and basically critic it. thanks.
thanks
Java NewBie
public class Ticket
private double ticketPrice;//price of the ticket
private String ticketType;//Type of ticket this is
private int ticketNumber;//ticket number
private String feature;//features the ticket offers
//Constructors
public void Ticket()
ticketPrice=10.00;
ticketType="Basic";
ticketNumber= 10000001;
feature=" Ticket is void after one use";
public void Ticket(double tprice, String tType, int tnumber,String fTicket)
ticketPrice=tprice;
ticketType=tType;
ticketNumber=tnumber;
feature=fTicket;
// Set Methods for the Class
// reset the ticket price
public void setTicketPrice(double price)
ticketPrice = price;
// set the type of ticket
public void setType(String type)
ticketType=type;
// set the ticket number
public void setTicketNumber(int numbero)
ticketNumber=numbero;
// save the features of the ticket
public void setTicketFeature(String feat)
feature = feat;
// reset the ticket price
// Get method for the Class
//get the ticket price
public double getTicketPrice()
return ticketPrice;
// get the type of ticket
public String getType()
return ticketType;
// get the ticket number
public int getTicketNumber()
return ticketNumber;
// get the features of the ticket
public String getTicketFeature()
return feature;
//method to print out information about Ticket
public void printTicketInfo()
System.out.println(getTicketNumber()+" " getType()": $"+ getTicketPrice());
System.out.printf("/n/nFeatures: /n",getTicketFeature());
}// end class Ticket
import java.util.*;
import java.io.*;
public class TicketSales
//create Scanner to obtain input from command window
//Scanner input= new Scanner(System.in);
//create Ticket Objects for each Ticket type
static Ticket premium = new Ticket();
static Ticket choice= new Ticket();
static Ticket basic= new Ticket();
static Random generator1 = new Random(2000000);
static int r = generator1.nextInt();
//process money exchange
//Varibles to help collect and process User choices
double userTotalTicketCost;
double Useramount;// Cost of Ticket User would like to purchase and amount of money user has
double userChange;//calculated change user recieves back, if any
static String userTicketChoice;//choice of ticket user would like to purchase
static int numTickets;//number of tickets user would like to purchase
// free variable for use
static char x;
//this method is designed to obtain Users ticket choice
// where input obtain is a character stored in a variable x
public static void getTicketChoice()
//Select Ticket Type
System.out.println("Please Select the type of Ticket you would like to purchase");
System.out.println("Please enter A, B, or C");
//print out the information for each of the ticket types
//System.out.println("A. "+ premium.printTicketInfo());
//System.out.println("/nB. "+ basic.printTicketInfo());
//System.out.println("/nC. "+ choice.printTicketInfo());
System.out.println("/nD. if you want to quit the transaction/n"+"/n");
//call method to get user information and save the information as userTicketChoice
selection();
confirm();//confirm that User wants to go ahead with choice
}//end getTicketChoice() method
public static void selection()
{// get and process user selection
//create Scanner to obtain input from command window
Scanner input= new Scanner(System.in);
//x = input.nextChar();
for( int i = 0; i < 3;i++)
//verify User selection to know which Ticket was selected
if(x=='A' || x=='a')
userTicketChoice = "premium";
break;
if(x=='B' || x=='b')
userTicketChoice = "basic";
break;
if(x=='C' || x=='c')
userTicketChoice = "choice";
break;
}//end for loop
//display greeting and than exit program
greeting();
}//end selection
public static void confirm()
//create Scanner to obtain input from command window
Scanner input= new Scanner(System.in);
char b;
System.out.println("You have selected to purchase the "+ userTicketChoice +" Ticket. Y/N?");
b = input.getchar();
//Process user response
if(b=='y'||b=='Y')
processEntry("userTicketChoice".getTicketPrice());//exits this method
else
getTicketChoice();// this starts over to receive valid input from user
}//end confirm
public static void greeting()
System.out.println("Thank you for Using Our Carmike Cinema Ticket Machine/n");
System.out.println("We hope you have a nice Day!!!/n");
//exit program here
public void processEntry(double ticketCost)
//use a do while loop to process payment
//Inquire as to how many tickets user is willing to purchase
Scanner input= new Scanner(System.in);
int i = 1;
do
System.out.println("How many Tickets would you like to purchase?");
numTickets = input.nextInt();
//display the total cost of tickets that user would like to purchase
userTotalTicketCost= (numTickets *ticketCost);//userTotalTicketCost happens to be the total cost of the ticket
//display calculated cost for User to see
System.out.println("The Total Cost of Tickets you have Ordered is: " + userTotalTicketCost+"/n");
System.out.println("Enter the Amount of Money you have to pay for Tickets: ");
Useramount = input.nextDouble();//Useramount happens to be total money user enters
//compare userTotalTicketCost and z to be sure that User entered the right amount of money
if (userTotalTicketCost > Useramount)//User did not enter sufficient funds
System.out.println("you have entered an invalid amount");
i++;
continue;
//User enter sufficient funds or even more
else if(userTotalTicketCost == Useramount || userTotalTicketCost < Useramount)
processPayment();
//process ticket printing
for(i=0; i> numTickets; i++)
printTicket();
break;
} while( (i < 4)&& (userTotalTicketCost > Useramount));//close of do while loop
}//end processEntry
public void processPayment()
{// this processes payment and issues ticket
//Calculate users return
userChange=(Useramount-userTotalTicketCost);
if ( userChange> 0)
System.out.println("Your Change is $"+ userChange +"/n/n/n/n/n");
}//end processPayment method
public void printTicket()
// Simulate the printing of a ticket.
System.out.println("######################################/n");
// use the Ticket Class method to print the Ticket information
System.out.println(String.valueOf(userTicketChoice).printTicketinfo());// convert to the saved ticket choice
System.out.println("######################################");
System.out.println("/n/n");
//main method begins program execution
public static void main()
//set the properties of the choice ticket
choice.setTicketPrice(45.00);
choice.setType("Choice");
choice.setTicketNumber(r);
choice.setTicketFeature("Access to viewing of 10 movies, at any of the hundreds of/n of Carmike movie theatre's nationwide./nYou also get 5 free refills on your drinks and 20 tubs of/npopcorn/n");
//set the properties of the basic ticket
basic.setTicketPrice(15.00);
basic.setType("Basic");
basic.setTicketNumber(r);
basic.setTicketFeature("Ticket is only good for one use. You get a free Cup of Soda/n and a tub of Popcorn at the food counter./n");
//set the properties of the premium ticket
premium.setTicketPrice(100.00);
premium.setType("Premium");
premium.setTicketNumber(r);
premium.setTicketFeature("Access to viewing of 25 movies,at any of the hundreds of/nthe 300 Carmike Cinema around the country./n You get free refills at the food counter for up to 50/ndrinks and 10 tubs of popcorn/n");
//Select Ticket Type
getTicketChoice();
System.out.println("How many "+ numTickets +" tickets would you like to purchase? ");
}//end main
}//end class TicketSalescannot find Symbol- method getChar()That means you're trying to call a method that doesn't exist.
When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read. -
Does Workshop deal with SOAP Messages with Attachments
I try to send back an image from my web service. Is there a way to make a SOAP Messages
with Attachments using BEA Workshop?
Thanks,
Jerome.Hi Jerome,
I'm pretty sure that Workshop doesn't support SwA (SOAP with Attachments) yet. The
product manager says that it is being considered for a future version, though :-)
In the meantime, I don't see any reason why you can't just use a Java class that
uses the JavaMail API to construct a Multipart MIME message. The MimeMultipart class
(the one that acts as a container for a multipart/related document) has a writeTo()
method that you can use to populate a ByteArrayOutputStream. Afterwards, you should
be able to use the toByteArray() method on this ByteArrayOutputStream, to create
the byte[] that maps to a xsd:base64Binary data type. The nice thing about this,
is that the target web service has complete access to the SOAP message (in the first
Body part), and all the attachments :-)
Just a thought...
Mike Wooten
"Jerome Sonnet" <[email protected]> wrote:
>
I try to send back an image from my web service. Is there a way to make
a SOAP Messages
with Attachments using BEA Workshop?
Thanks,
Jerome. -
HT4651 How do I deal with this message please
“DYMO Label v.8.mpkg” can’t be opened because it is from an unidentified developer.
your security preferences allow installation of only apps from the Mac App Store and identified developers.
I cant seem to find where this is set to allow genuine software to be updatedSystem Preferences, Security & Privacy, General.
Mountain Lion: About Gatekeeper -
How do I prevent reporting Button Index line of Message Popup Result in TestStand report??
My Message Popup is reported as:
Verify that the Installed memory (RAM) is 1.96 GB: Passed
Button Index: 1
What is the best way to prevent reporting the Button Index line?For your step in the sequence open Step.Result in Variables pane, right click on ButtonHit, select Advanced>Edit Flags and uncheck "Include in Report" property. It is checked by default for custom step types created as combined types with the Message Popup general type.
That should be done for all instances of these step. When I tried just to incheck the "Include in Report" property in my step type, somehow it is still checked for all newly created steps of this step type. Possible solutions (besides changing them all manually as I described above) are to modify them at drop time from OnNewStep custom substep or to create automated script and run it on your sequences after creation to modify the flag.
Let me know if you need help with these solutions.
Sergey Kolbunov
CLA, CTD -
While using teststand many of the technicians that run the tests have complained that the default font in the TestStand message popup is to hard to read. Is there a way to change the default font?
The message popup step uses the system message box font. You can change it as follows (at least in Win2000):
- Right click on the desktop and select Properties.
- On the appearance tab, click on the Message Text in the message box to select the Message Box item.
- Increase the font size
- Restart TestStand -
Control Buttons in message popup with Digital I/O
In my Test system the operator can use only the Start Stop Quit buttons on the Panel.
He aint have any mouse
That means I have to provide him wit all the control power thr' these 3 digital I/Ps
There are many message popups in the SequentialModel.seq file
The OPERATOR will respond to them with the 3 H/W buttons.
OK= Green
Terminate = Red
how can I assign my Buttons to all Popup messages on teststand Irrespective of their .(i.e handling them Individually)My plan is to control the whole testsystem, with Hardware buttons (On off S/Ws for Operator) (operator wont be using mouse- it takes timeto scroll & prod is slow).
The H/W buttons r read thr Labview. The file is a member function of the class that I call In teststand seq.
I am trying to read and respond to Teststand dialogues thr' the Operator Interface using these 3 buttons -
Can't edit the Message Popup in TestStand 3.5
I'm using TestStand 3.5/Labview 8, and when I inserted a Message Popup in my sequence, I found that I'm unable to edit it.
I started with a new sequence file, right click->Insert Step->Message Popup, then right clicked the message popup and select Edit Message Settings. I then get the following error (see err1.jpg attachment for actual error popup):
SeqEdit.exe
Error in call to LoadPanelEx.
Parent Panel Handle: 1
UIR File Name: editmsg.uir
Panel Resource ID: 1
hInstance: 0x597F0000, D:\...\TestStand 3.5\Components\NI\StepTypes\MsgBox\msgbox.dll
Error Code: -143
ActiveX control error
Then when I click OK in that error I get another error (see err2.jpg attachment for actual error popup):
Sequence Editor
Program Error.
Error Code: -17001
I verified that the msgbox.dll file exists, and from reading some posts on the forum thought it wasn't properly registered. When I tried to register it using regsvr32 I got the following message: "msgbox.dll was loaded, but the DllRegisterServer entry point was not found. This file can not be registered." See err3.jpg attachement for actual error popup.
Any ideas what is going on here and what I need to do to correct it?
Thanks,
-Bill
Attachments:
err3.JPG 15 KB
err1.JPG 20 KB
err2.JPG 11 KBUnfortunately that didn't work. I went to Start->Programs->National Instruments->TestStand 3.5->Operator Interfaces->LabWindows-CVI and got the following error message:
Test Executive
Error in call to LoadPanelEx
Parent Panel Handle: 0
UIR File Name: TestExec.uir
Panel Resource ID: 4
Hinstance: 0x00400000, D:\...\OperatorInterfaces\NI\Full-Featured\CVI\TestExec.exe
Error Code: -143
Active X control error
The actual error window is attached. Looks like my installation has other problems? With the way our IT department operates, if there is a way to fix this without reinstalling, that would really be helpful... :-)
Attachments:
err4.JPG 20 KB -
Modal message popup hangs parallel model in Teststand 4?
Hi:
I'm having a problem using the 'Make Modal' option on message popups. It is hanging the user interface.
Here is what I've done:
* created a sequence with just a message popup in it (using Teststand 4.0 editor)
* set the popup to be modal
* set the sequence to use the parallel model
* recompiled Full Featured CVI User interface for teststand 4.0 (using CVI 8.0.1)
* run sequence in the recompiled user interface
* popup is displayed
* after acknowledging the popup, the popup and the user interface freeze
If I change the sequence to use the batch model, everything works.
If I don't recompile the user interface project that came with Teststand and just run the exe, everything works.
What am I missing? Sequence file attached.
Thanks,
Dave
Attachments:
modalpopup.seq 6 KBHi dseel,
After I copied over your version of modelsupport2.dll, I see the attached error message for every test socket, basically saying that TestStand can't find a certain function in modelsupport2.dll.
What modifications did you make to the dll?
One thing though, I notice the same error message even with the Simple OI... Where are you putting modelsupport2.dll? In the same folder as the CVI Executable, or in <TestStand>\Components\NI\Models\TestStandModels?
Jervin Justin
NI TestStand Product Manager
Attachments:
TSErrorMessage.jpg 56 KB -
Message Popup crashes TestStand
Hello,
Our sequence executes under TestStand 3.5 ; steps call dlls written with LabWindows/CVI 7.1.1.
Everything is going fine except some calls to the "Message Popup" step
of TestStand : sometimes TestStand crashes on such calls (we have to
stop it from Windows Task Manager). We have several "Message Popup" to
display during the sequence execution and we have noticed that the
application does not systematically crash on the same Message Popup
step.
The target computer is a PIV 3.2 HT with 1Gb RAM.
Does anybody have the same problem ?Hi,
We have installed CVI8.0.0.273 runtime engine and we still have crashes on some Message Popups in SeqEdit.
Here is a short description of the system : we have a PXI 1000B chassis connected to the computer with a PCI and a PXI MXI-3 (software v1.15).
PXI cards : 2 PXI CAN 8461/2 (one dedicated to DiagOnCAN and the other one for CAN), 1 PXI 6070E, 1 PXI 6713, 1 PXI 6704, 1 PXI GPIB. We also have 2 PCI cards : Addi-Data APCI 2032 which drive the relays of the system. We have installed DAQ-mx 8.0 (DAQ 7.4.0 is also used on the system for an other application, not with TestStand), NI-488.2 2.43 and NI-CAN 2.3.2.
Our application is multithreaded (3 threads + 1 main thread).
We have tried several solutions not to use the step "MessagePopup" of TestStand : we have created a specific step calling a CVI dll. In this dll we call the CVI MessagePopup function, but TestStand still crashes. Next we have tried to display a panel (created in a uir file) instead of the Popup but the problem is not solved (we tried several combinations of panel attributes).
In Windows TaskManager we see that the PIV 3.2GHz HT is never overloaded (CPU load = about 90%) and that there is enough memory available on the system.
If we try to run a sequence that creates 3 threads which process nothing (infinite loops), with no signals / CAN / instruments processing, we can't reproduce the crash caused by the Popups.
Do you have any suggestion about that ? -
How can I create unique partnerships to deal with like EDI messages?
I have an EDI to Application partnership setup currently that deals with translating MEDRUC type EDIFACT messages to a mainframe format. The setup is
Sender = PARTNERA,
Receiver = PARTNERB
DocType = MEDRUC.
In the Input EDI tab the
Sender Qualifier ID = ZZ:PARTNERA
Receiver Qualifier ID = ZZ:PARTNERB
Standard = EDIFACT
Version = D
Release Number = 97B.
Use UNG to locate partnerships = No
EDIFACT messages contain all this information in their UNB and UNH segments which is where SunONE IS B2B looks to then match against the relevant partnership. My problem is this does not go to enough granularity for me to distinguish uniqueness for the second partnership I need to create.
The problem is the "Association assigned code" field in the UNH for EDIFACT messages is not catered for anywhere in the partnership details area. This means then that whilst my existing partnership deals with Simplified Billing Claim MEDRUC's which is Association assigned code = SBC20, I can't create an EDI to Application partnership for PARTNERA and PARTNER B to cater for Two Way Gap Claiming MEDRUC's which are Association assigned code = TWC10, ie the two messages are D97B MEDRUC type messages only distinguished from each other by this Association assigned code.
Any ideas how can I then create a unique EDI to Application partnership for this TWC10 MEDRUC message?
What I am thinking I will have to do is make this second partnership Application to Application and create a custom service to wrap the MEDRUC message with a HREC/TREC and use the parameters in the HREC to dictate the DocType rather than use the UNB/UNH segments in the MEDRUC?Hmmm. It looks like way back when the decision was made on how specific the keys had to be, they didn't get quite specific enough for your case. I'm not super experienced with EDIFACT but I'll throw out some suggestions based on my HREC and X12 knowledge.
A. Could you handle both instnaces through the same partnership, but alter the map to create unique outputs based on the two different types? At least of the cards would need to be handled through Route, but you could have that picked up by a simple Outprep / Gateway Service list that put the data where you wanted it.
B. Before Parse, run a custom service that is capable of inspecting for which type of data it is, then modify one of the key fields in place to find the Second partnership. Really getting adventurous, maybe you could alter keys in the UNG to make the distinction. This assumes that you don't have both types of documents in the same interchange.
C. Your idea may be workable. Can you give some more detail on the make-up of the Service list and the destination/processing of the two differnt types of MEDRUC?
Thanks. -
How do I deal with constant "error loading content" messages?
I'm constantly seeing error messages on my Apple TV (2nd gen) on content I easily watch on my other iDevices. What gives? This thing is rapidly becoming a vy expensive paper weight. Possibly the worst Apple product I've yet purchased. Am I alone in this? What can I do?
You cannot connect to TC using USB.
Plug the TC into the computer using ethernet.
Press and hold the reset button on the TC for about 10sec.. until front led rapidly flashes.. release it.
Open the airport utility and make sure you can locate the TC. Check the disk page that the disk started up without errors.
When you say
Sodrawi wrote:
How do I deal with the error message at my Time Capsule saying "There is a problem to connect to server xxxx-Time-Capsule.local."
I am guessing you mean Time Machine.
If TM still cannot find the TC disk.. reset TM and redo the setup.
Read A4 here.
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
I have a I Mac in my office & a mac lap top at home. Now I have the same e-mail address. I want the Facetime for my mac at home. 10.5.8 how can I get it?
-
saludos al foro... alguien me puede ayudar con el error-1074395975 ocurred at imaq avi read frame. tengo labview 2011 ni vision 2011 ni vision assistant 2011 directx11 adjunto una imagen del diagrama a bloques y el mensaje de error gracias ¡Resuelto!
-
I am learning SAP FI. For this I created a customer invoice using T.Code F-22 and later posted incoming payment from the customer using T.Code F-28. After that I checked the line items for this same customer using the T.Code FBLN5. The cleared items
-
How to use Toplink as SDO in Oracle BPEL
can we use Toplink as SDO for BPEL?
-
PDF not displaying correctly from Pages to Adobe
Hi there. I have created a PDF using pages, but when displayed in Adobe, or saved to usb and then opened on a windows machine, all is in order, BUT one of the photos is cropped? I don't know how to fix this, despite trying! Please help! Thanks, Racha