Debug mode in windows 2008r2

I am opening 2k8r2 in debug mode by pressing f8. But system stuck at welcome screen. same case if I am using bcdedit and give command
bcdedit -debug on
and restart machine,it also stuck during startup. I am using vm-machine. But other features like driver signature enforcement is working well. Please help me.

Hello SubodhSaxena.
I suggest you to ask this question in the Windows Server General Forum at
http://social.technet.microsoft.com/Forums/en-US/home?forum=winservergen; I can move it there for you if you want.
Bye.
Luigi Bruno
MCP, MCTS, MOS, MTA

Similar Messages

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

Run form in debug mode with windows vista

hi guys
plz help me
i'm using oracle forms 10g r2 on windows vista home primume and everything is ok but
when i need to run any form in debug mode i get the following
the jvm 1.4 give me jvm is aborting after that
the oc4j give me the following error frm-92101 there was a failure in the form server during start up
thanks

Hi Manoj,
You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
Let me know if you need more information.
Thanks,
Pawan

VS2013 not running in debug mode on Windows 10 Technical Preview Build 10041

am getting the following errors every time i try to run my projects in debug mode what can be the issue.
Managed Debugging Assistant 'FatalExecutionEngineError' has detected a problem in 'C:\Program Files (x86)\IIS Express\iisexpress.exe'.
Additional information: The runtime has encountered a fatal error. The address of the error was at 0x73c0d5a5, on thread 0x1a0c. The error code is 0xc0000005. This error may be a bug in the CLR or in the unsafe or non-verifiable portions of user
code. Common sources of this bug include user marshaling errors for COM-interop or PInvoke, which may corrupt the stack.
Then when I continue the following appears
An unhandled exception of type 'System.AccessViolationException' occurred in System.Data.dll
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Then it stops..
This happens when a database call is made and only does this when debug, when I run it using the browser link all is good. The applications work well.

Hi Bigmachini,
According to my solution, what about your issue now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
@Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
>>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JDeveloper 11.1.2.1.0 Hangs in Debug Mode Running in Windows 7 OS

Hi All,
i am working with JDeveloper 11.1.2.1.0 version,intel core i3 -2120 CPU,@3.30GHZ,4GB RAM, Windows 7 32 bit OS
i am facing Jdeveloper Hangingness when loading BTF inside a popup and making a call to java code on any action if any debug point is avilable inside java file,JDeveloper is getting hanged and the only way to come out of this issue is by killing the process and restarting the JDeveloper.
certain cases when integrated server is started with debug mode(intial startup ) also Jdeveloper is getting hanged and there is no way to get out of this except restart.
if i see memory parameters from Java VisualVM console
Heap is avilable
and the other process are running with out any issue.
is this problem is with configuration settigns ?
what steps/settings/patches i need to follow to get out of this problem ?

is this happening after removing the system folder also?

Devloper system configuration (weblogic in debug mode on Eclipse/windows)

Hi,
I work on a project, which we may consider as big. Couple of thousads of java files, muilti-tired. We use, weblogic in eclipse on widows for development. Curreltly we have 1G ram on each of developer mechines. But most of us are complaining that, system is running slow in debug mode. Sometimes, we can't even work.
I greatly appreciate if somebody can point me to the URL or suggestion for good system configuration, so that we can work comfortably.
Just asking to increase the RAM may not help me in convencing the business/management. If there any specific recommandations by either by BEA or IBM (eclipse), that helps me a lot in raising the same to our buisness.
Greatly appricate your suggestions
Reg,
Mahi

Hi Bigmachini,
According to my solution, what about your issue now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
@Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
>>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ImaqDisplayImage hangs when running .exe and the window can't be moved when in Debug mode

I am running a multi threaded application with multiple windows, two of which display images but only one is open all the time. The window displaying the image (using imaqDisplayImage(myImage, 1, TRUE)) can not be moved or resized, the image continually updates though, when I run the app in debug mode.
If I run an executable, either debug or release the following happens:
Everything looks good right when the app starts, all windows are displayed and the live image window is continually updated.
If I click on any window in my program or not in my program, the imaqDisplayImage window freezes and will not udate its image, it will allow me to move it though, and it has (Not Responding) in the title bar. The main window of my program does not freeze and behaves normally.
I know that an acquisition is still taking place because I have a button on my main window that copies the last grabbed image that should be displayed in the imaqDisplayImage window and displayes it on a canvas (using imaqImageToArray etc . . .) and this image changes everytime I click the button.
Anyone have any tips with dealing with imaqDisplayImage windows?? Thanks!

At this point we want to pinpoint exactly where in your code this behavior is originating from. Try running the included examples which can be found here:
C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\IMAQ\Display
C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\Vision\1.GettingStarted
and see if you experience the same behavior. If we still experience this, then we know that it is a setting within the functions that we need to change. If not, we know that it is somewhere else in the code of the bigger project which is the culprit.
Daniel G.
Applications Engineer
National Instruments

[WPSL]Windows App Certification Kit Test Fails, binary is built in debug mode

Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.

Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.
Hi ranjit,
>>Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1
Okay, this may be due to the upgrading process, could you tell us what the detailed version of your Visual Studio is(for example: Visual Studio 2013 Update 4)?
You may need to create a new Windows Phone 8.1 Silverlight project and try to upload it to Store, if this problem can be resolved, I think this should be related to the upgrading process, you may need to start from scratch by recreating a WP8.1 SL project.
To exclude environment facts, I would also suggest you retesting it on a new machine with the latest IDE.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows App Certification Kit Test Fails, binary is built in debug mode

Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.

Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.

Need Help - JVM error in Forms 10g in Debug mode

Hello,
This issue has bothered me since I started coding in Forms. If I use an Associative Array with a VARCHAR2 index type, whenever I try to look at the contents of the array, a small JVM aborting messagebox appears with OK as the only option. Once I click OK, I get a Forms error saying it has lost connection with the server. This ONLY happens if I'm trying to look at the contents of the array when it has data. I can see the variable in the debug console just fine when it doesn't have data, but once one value is populated, the JVM aborting message pops up. Another weird caveat is the JVM error will only occur IF you have a debug window open which would display the contents of this array. I can still use arrays of this type IF I don't try and look at the contents in the debugger.
Here is a quick test case. I just have a simple form with one push button. The following code is in the WHEN-BUTTON-PRESSED trigger:
DECLARE
     TYPE COLUMN_ARRAY IS TABLE OF VARCHAR2(4000) INDEX BY VARCHAR2(50);
     testArray COLUMN_ARRAY;
BEGIN
     testArray('col1') := 'value1'; -- break point here
     testArray('col2') := 'value2';
     testArray('col3') := 'value3';
END;
Put a breakpoint on the first statement and debug it. If you have the local variables debug window up, the JVM aborting error will appear when you step over the first line. We have submitted a metalink bug report about 3 months ago but never heard anything back. I wanted to post something here incase anyone else has encountered this error and might know how to fix it.
Here are some details of the environment we are using.
Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE     10.1.0.5.0     Production
There was also a log file that was created on the error. Here are the contents:
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x603c0f7b, pid=4184, tid=5384
# Java VM: Java HotSpot(TM) Client VM (11.3-b02 interpreted mode, sharing windows-x86)
# Problematic frame:
# C [orageneric10.dll+0xc0f7b]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x010b7400): JavaThread "main" [_thread_in_native, id=5384, stack(0x00030000,0x00130000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x0000000c
Registers:
EAX=0x00000000, EBX=0x00000000, ECX=0x77c421e7, EDX=0x00000001
ESP=0x0012ba60, EBP=0x0012bb60, ESI=0x00c8a47c, EDI=0x00000000
EIP=0x603c0f7b, EFLAGS=0x00210212
Top of Stack: (sp=0x0012ba60)
0x0012ba60: 00000000 0369d8ac 037f6c00 037f6c00
0x0012ba70: 037f6c00 003b65a8 6d9335ec 00000000
0x0012ba80: 00000018 0369d8ac 6d8b83bc 2b193da8
0x0012ba90: 0369d8ac 00000018 6d96abbe 0369d8ac
0x0012baa0: 6d91ad4e 6d97c34f 037f6c00 0369d8a8
0x0012bab0: 0369d8b0 6d97d636 270aba00 00000000
0x0012bac0: 037f6c00 0369d8a8 6d96e711 0369d8b0
0x0012bad0: 037f6c00 0000000a 0369d898 00000010
Instructions: (pc=0x603c0f7b)
0x603c0f6b: 90 55 8b ec 81 ec fc 00 00 00 ff 75 0c 8b 45 08
0x603c0f7b: 8b 50 0c 8b 48 10 89 95 04 ff ff ff 8b 50 14 89
Stack: [0x00030000,0x00130000], sp=0x0012ba60, free space=1006k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [orageneric10.dll+0xc0f7b]
C [oraclient10.dll+0x45fa9]
C [orageneric10.dll+0x2b21d]
C [DEB.dll+0xea2b]
C [DEB.dll+0xcd54]
j oracle.opb.debugger.impl.DbgServer.nGetPackageValues(JJ)[B+0
j oracle.opb.debugger.impl.DbgServer.getPackageValues(IJ)V+5
j oracle.opb.debugger.impl.DbgPacketProcessor.processCommand(Loracle/opb/net/CommandPacket;)Z+624
j oracle.opb.debugger.impl.DbgPacketProcessor.processPacket(Z)Z+30
j oracle.opb.debugger.impl.DbgPacketProcessor.processPacketsUntilRun()V+2
j oracle.opb.debugger.impl.DbgServer.suspended()V+22
v ~StubRoutines::call_stub
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.opb.debugger.impl.DbgServer.nGetPackageValues(JJ)[B+0
j oracle.opb.debugger.impl.DbgServer.getPackageValues(IJ)V+5
j oracle.opb.debugger.impl.DbgPacketProcessor.processCommand(Loracle/opb/net/CommandPacket;)Z+624
j oracle.opb.debugger.impl.DbgPacketProcessor.processPacket(Z)Z+30
j oracle.opb.debugger.impl.DbgPacketProcessor.processPacketsUntilRun()V+2
j oracle.opb.debugger.impl.DbgServer.suspended()V+22
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x03c28400 JavaThread "Packet Receiver[oracle.opb.net.PacketTransceiver@61de33]" [_thread_in_native, id=5424, stack(0x03da0000,0x03ea0000)]
0x03c27000 JavaThread "Packet Sender[oracle.opb.net.PacketTransceiver@61de33]" [_thread_blocked, id=1660, stack(0x03ca0000,0x03da0000)]
0x0325ec00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3432, stack(0x03880000,0x03980000)]
0x03258800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=6132, stack(0x03760000,0x03860000)]
0x03257400 JavaThread "Attach Listener" daemon [_thread_blocked, id=4244, stack(0x03660000,0x03760000)]
0x03253400 JavaThread "Finalizer" daemon [_thread_blocked, id=4212, stack(0x03550000,0x03650000)]
0x0324ec00 JavaThread "Reference Handler" daemon [_thread_blocked, id=6056, stack(0x03440000,0x03540000)]
=>0x010b7400 JavaThread "main" [_thread_in_native, id=5384, stack(0x00030000,0x00130000)]
Other Threads:
0x0324d000 VMThread [stack: 0x03330000,0x03430000] [id=3540]
0x03260400 WatcherThread [stack: 0x03980000,0x03a80000] [id=5840]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 538K [0x22990000, 0x22a90000, 0x22e70000)
eden space 896K, 52% used [0x22990000, 0x22a06b08, 0x22a70000)
from space 64K, 100% used [0x22a80000, 0x22a90000, 0x22a90000)
to space 64K, 0% used [0x22a70000, 0x22a70000, 0x22a80000)
tenured generation total 4096K, used 109K [0x22e70000, 0x23270000, 0x26990000)
the space 4096K, 2% used [0x22e70000, 0x22e8b660, 0x22e8b800, 0x23270000)
compacting perm gen total 12288K, used 82K [0x26990000, 0x27590000, 0x2a990000)
the space 12288K, 0% used [0x26990000, 0x269a48c0, 0x269a4a00, 0x27590000)
ro space 8192K, 67% used [0x2a990000, 0x2aef7ea8, 0x2aef8000, 0x2b190000)
rw space 12288K, 53% used [0x2b190000, 0x2b805530, 0x2b805600, 0x2bd90000)
Dynamic libraries:
0x00400000 - 0x00410000      C:\Oracle\Ora10gRep\bin\frmweb.exe
0x7c900000 - 0x7c9b2000      C:\WINNT\system32\ntdll.dll
0x7c800000 - 0x7c8f6000      C:\WINNT\system32\kernel32.dll
0x608d0000 - 0x60963000      C:\Oracle\Ora10gRep\bin\oranls10.dll
0x60730000 - 0x607dc000      C:\Oracle\Ora10gRep\bin\oracore10.dll
0x60c40000 - 0x60c47000      C:\Oracle\Ora10gRep\bin\orauts.dll
0x71ab0000 - 0x71ac7000      C:\WINNT\system32\WS2_32.dll
0x77dd0000 - 0x77e6b000      C:\WINNT\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINNT\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000      C:\WINNT\system32\Secur32.dll
0x77c10000 - 0x77c68000      C:\WINNT\system32\msvcrt.dll
0x71aa0000 - 0x71aa8000      C:\WINNT\system32\WS2HELP.dll
0x76b40000 - 0x76b6d000      C:\WINNT\system32\WINMM.dll
0x77f10000 - 0x77f59000      C:\WINNT\system32\GDI32.dll
0x7e410000 - 0x7e4a1000      C:\WINNT\system32\USER32.dll
0x62b40000 - 0x62b53000      C:\Oracle\Ora10gRep\bin\oraunls10.dll
0x774e0000 - 0x7761d000      C:\WINNT\system32\ole32.dll
0x66220000 - 0x6623c000      C:\Oracle\Ora10gRep\bin\nn.dll
0x64ce0000 - 0x64dbd000      C:\Oracle\Ora10gRep\bin\UIW.dll
0x64ca0000 - 0x64cb1000      C:\Oracle\Ora10gRep\bin\UTL.dll
0x64cd0000 - 0x64cd7000      C:\Oracle\Ora10gRep\bin\UTC.dll
0x64cc0000 - 0x64cc9000      C:\Oracle\Ora10gRep\bin\UTJ.dll
0x64f10000 - 0x64f21000      C:\Oracle\Ora10gRep\bin\UIIM.dll
0x73000000 - 0x73026000      C:\WINNT\system32\WINSPOOL.DRV
0x5d090000 - 0x5d12a000      C:\WINNT\system32\COMCTL32.dll
0x64ed0000 - 0x64ef6000      C:\Oracle\Ora10gRep\bin\UIOLE.dll
0x763b0000 - 0x763f9000      C:\WINNT\system32\comdlg32.dll
0x7c9c0000 - 0x7d1d7000      C:\WINNT\system32\SHELL32.dll
0x77f60000 - 0x77fd6000      C:\WINNT\system32\SHLWAPI.dll
0x663d0000 - 0x66414000      C:\Oracle\Ora10gRep\bin\CA.dll
0x66340000 - 0x6636a000      C:\Oracle\Ora10gRep\bin\mmc.dll
0x616b0000 - 0x61893000      C:\Oracle\Ora10gRep\bin\oraclient10.dll
0x62b60000 - 0x62b66000      C:\Oracle\Ora10gRep\bin\oravsn10.dll
0x60d30000 - 0x60de8000      C:\Oracle\Ora10gRep\bin\oracommon10.dll
0x60300000 - 0x6071c000      C:\Oracle\Ora10gRep\bin\orageneric10.dll
0x629c0000 - 0x629d2000      C:\Oracle\Ora10gRep\bin\orasnls10.dll
0x62b80000 - 0x62c86000      C:\Oracle\Ora10gRep\bin\oraxml10.dll
0x00330000 - 0x00341000      C:\WINNT\system32\MSVCIRT.dll
0x607e0000 - 0x608cc000      C:\Oracle\Ora10gRep\bin\oran10.dll
0x62000000 - 0x6202c000      C:\Oracle\Ora10gRep\bin\oranl10.dll
0x62030000 - 0x62042000      C:\Oracle\Ora10gRep\bin\oranldap10.dll
0x62090000 - 0x62184000      C:\Oracle\Ora10gRep\bin\orannzsbb10.dll
0x61e10000 - 0x61e52000      C:\Oracle\Ora10gRep\bin\oraldapclnt10.dll
0x61f30000 - 0x61f47000      C:\Oracle\Ora10gRep\bin\orancrypt10.dll
0x71ad0000 - 0x71ad9000      C:\WINNT\system32\WSOCK32.dll
0x76d60000 - 0x76d79000      C:\WINNT\system32\iphlpapi.dll
0x77120000 - 0x771ab000      C:\WINNT\system32\OLEAUT32.dll
0x621a0000 - 0x621d7000      C:\Oracle\Ora10gRep\bin\oranro10.dll
0x621f0000 - 0x621fc000      C:\Oracle\Ora10gRep\bin\orantcp10.dll
0x61f70000 - 0x61f76000      C:\Oracle\Ora10gRep\bin\oranhost10.dll
0x61f20000 - 0x61f26000      C:\Oracle\Ora10gRep\bin\orancds10.dll
0x62210000 - 0x62216000      C:\Oracle\Ora10gRep\bin\orantns10.dll
0x60970000 - 0x60c31000      C:\Oracle\Ora10gRep\bin\orapls10.dll
0x62500000 - 0x62507000      C:\Oracle\Ora10gRep\bin\oraslax10.dll
0x627b0000 - 0x628b3000      C:\Oracle\Ora10gRep\bin\oraplp10.dll
0x618b0000 - 0x61906000      C:\Oracle\Ora10gRep\bin\orahasgen10.dll
0x622b0000 - 0x622e6000      C:\Oracle\Ora10gRep\bin\oraocr10.dll
0x622f0000 - 0x62315000      C:\Oracle\Ora10gRep\bin\oraocrb10.dll
0x5b860000 - 0x5b8b5000      C:\WINNT\system32\NETAPI32.dll
0x76bf0000 - 0x76bfb000      C:\WINNT\system32\PSAPI.DLL
0x62a80000 - 0x62af6000      C:\Oracle\Ora10gRep\bin\orasql10.dll
0x66450000 - 0x66538000      C:\Oracle\Ora10gRep\bin\frmw.dll
0x00410000 - 0x004d4000      C:\Oracle\Ora10gRep\bin\frmwcm.dll
0x662f0000 - 0x66320000      C:\Oracle\Ora10gRep\bin\mmi.dll
0x64e30000 - 0x64e93000      C:\Oracle\Ora10gRep\bin\UIREM.dll
0x659a0000 - 0x659ee000      C:\Oracle\Ora10gRep\bin\ROS.dll
0x64ad0000 - 0x64c05000      C:\Oracle\Ora10gRep\bin\VGS.dll
0x66250000 - 0x6627e000      C:\Oracle\Ora10gRep\bin\mmw.dll
0x662a0000 - 0x662b0000      C:\Oracle\Ora10gRep\bin\mmv.dll
0x73b50000 - 0x73b67000      C:\WINNT\system32\AVIFIL32.dll
0x77be0000 - 0x77bf5000      C:\WINNT\system32\MSACM32.dll
0x75a70000 - 0x75a91000      C:\WINNT\system32\MSVFW32.dll
0x662c0000 - 0x662df000      C:\Oracle\Ora10gRep\bin\mms.dll
0x66690000 - 0x6680f000      C:\Oracle\Ora10gRep\bin\DEB.dll
0x627a0000 - 0x627af000      C:\Oracle\Ora10gRep\bin\oraplc10.dll
0x66380000 - 0x66389000      C:\Oracle\Ora10gRep\bin\mma.dll
0x64ff0000 - 0x65003000      C:\Oracle\Ora10gRep\bin\UAT.dll
0x64f70000 - 0x64f94000      C:\Oracle\Ora10gRep\bin\UIA.dll
0x64f30000 - 0x64f45000      C:\Oracle\Ora10gRep\bin\UIDC.dll
0x76390000 - 0x763ad000      C:\WINNT\system32\IMM32.DLL
0x773d0000 - 0x774d3000      C:\WINNT\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x74720000 - 0x7476c000      C:\WINNT\system32\MSCTF.dll
0x755c0000 - 0x755ee000      C:\WINNT\system32\msctfime.ime
0x71a50000 - 0x71a8f000      C:\WINNT\System32\mswsock.dll
0x76f20000 - 0x76f47000      C:\WINNT\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000      C:\WINNT\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINNT\system32\WLDAP32.dll
0x00d30000 - 0x00d88000      C:\WINNT\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINNT\System32\wshtcpip.dll
0x76fc0000 - 0x76fc6000      C:\WINNT\system32\rasadhlp.dll
0x6d8b0000 - 0x6db06000      C:\Oracle\Ora10gRep\jdk\jre\bin\client\jvm.dll
0x7c340000 - 0x7c396000      C:\WINNT\system32\MSVCR71.dll
0x6d340000 - 0x6d348000      C:\Oracle\Ora10gRep\jdk\jre\bin\hpi.dll
0x6d860000 - 0x6d86c000      C:\Oracle\Ora10gRep\jdk\jre\bin\verify.dll
0x6d3e0000 - 0x6d3ff000      C:\Oracle\Ora10gRep\jdk\jre\bin\java.dll
0x6d8a0000 - 0x6d8af000      C:\Oracle\Ora10gRep\jdk\jre\bin\zip.dll
0x6d6c0000 - 0x6d6d3000      C:\oracle\Ora10gRep\jdk\jre\bin\net.dll
VM Arguments:
jvm_args: -Djava.compiler=NONE abort exit -Xrs -Xbootclasspath/p:C:\Oracle\Ora10gRep\vbroker4\lib\vbjboot.jar
java_command: <unknown>
Launcher Type: generic
Environment Variables:
CLASSPATH=C:\Oracle\Ora10gRep\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;C:\Oracle\Ora10gRep\jlib\repository.jar;C:\Oracle\Ora10gRep\jlib\ldapjclnt10.jar;C:\Oracle\Ora10gRep\jlib\debugger.jar;C:\Oracle\Ora10gRep\jlib\ewt3.jar;C:\Oracle\Ora10gRep\jlib\share.jar;C:\Oracle\Ora10gRep\jlib\utj.jar;C:\Oracle\Ora10gRep\jlib\zrclient.jar;C:\Oracle\Ora10gRep\reports\jlib\rwrun.jar;C:\Oracle\Ora10gRep\forms\java\frmwebutil.jar
PATH=C:\Oracle\Ora10gRep\bin;C:\Oracle\Ora10gRep\jdk\jre\bin\client
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 1046512k(39192k free), swap 4094688k(2722564k free)
vm_info: Java HotSpot(TM) Client VM (11.3-b02) for windows-x86 JRE (1.6.0_13-b03), built on Mar 9 2009 01:15:24 by "java_re" with MS VC++ 7.1
time: Thu Jul 02 14:35:18 2009
elapsed time: 131 seconds
Any help is appreciated.
Thanks!!!

Nobody has any suggestions or comments???
Can anyone confirm they have the same issue when running the sample code I provided below?
Can anyone see the contents of a VARCHAR2 index based array when debugging??
Thanks

JVM crash when using debug mode in eclipse

Hi,
I get a SIGSEGV every time I use debug mode in Eclipse. Sometimes after a few breakpoints, sometimes when I start the debug view.
Have Eclipse helios and JRE 6.0_21-b06 but have also tried 1.6.0_03-b05 with same result.
The log file (hs_error_pidxxx.log) gives the following:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xff23259c, pid=2917, tid=2
# JRE version: 6.0_21-b06
# Java VM: Java HotSpot(TM) Server VM (17.0-b16 mixed mode solaris-sparc )
# Problematic frame:
# C [libc.so.1+0x3259c] strncmp+0x348
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x0003d800): JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x00000000
Registers:
O0=0x00000001 O1=0x00000000 O2=0x00000001 O3=0x00000000
O4=0x00000102 O5=0x0125d898 O6=0xfe37d3b8 O7=0xe1dd104c
G1=0x00105000 G2=0x00007b00 G3=0x00000000 G4=0xe2947b08
G5=0xfee6e2e8 G6=0x00000000 G7=0xfe3e0200 Y=0x00000000
PC=0xff23259c nPC=0xff2325a0
Top of Stack: (sp=0xfe37d3b8)
0xfe37d3b8: 00000000 e1ebec00 ff2c1bd0 e1ebec00
0xfe37d3c8: 011966e8 00000001 fee2e000 00001cc4
0xfe37d3d8: 1d69c014 e2963fec 00000001 00000108
0xfe37d3e8: 0000006e 0000006e fe37d3f8 e2947bd4
0xfe37d3f8: e2963ff4 014e2b38 e2963ffc 00000000
0xfe37d408: fee2e000 011afd80 01da6f38 e2963fec
0xfe37d418: fe37d484 0125da90 0125dab8 00000002
0xfe37d428: 00000000 e2974f88 fe37d488 e2350fd4
Instructions: (pc=0xff23259c)
0xff23258c: 91 ee 00 00 b4 a6 a0 01 0a bf ff e1 01 00 00 00
0xff23259c: f8 0e 40 18 fa 0e 40 00 b2 06 60 01 80 a7 00 1d
Stack: [0xfe300000,0xfe380000], sp=0xfe37d3b8, free space=1f4ff23259ck
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libc.so.1+0x3259c] strncmp+0x348
C [libpangoft2-1.0.so.0.501.1+0x7bdc]
C [libswt-pi-gtk-3650.so+0x50fdc] Java_org_eclipse_swt_internal_gtk_OS__1pango_1context_1list_1families+0x74
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+472954808
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
j org.eclipse.ui.progress.UIJob$1.run()V+53
J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
j org.eclipse.ui.internal.Workbench.runUI()I+555
j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
j org.eclipse.ui.internal.Workbench$7.run()V+55
j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
v ~StubRoutines::call_stub
V [libjvm.so+0x15e33c]
V [libjvm.so+0x797afc]
V [libjvm.so+0x217704]
V [libjvm.so+0x215d8c]
C [libjava.so+0x10bfc] Java_sun_reflect_NativeMethodAccessorImpl_invoke0+0x18
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+746878888
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
V [libjvm.so+0x15e33c]
V [libjvm.so+0x2012dc]
C [java+0x3ab8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
j org.eclipse.ui.progress.UIJob$1.run()V+53
J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
j org.eclipse.ui.internal.Workbench.runUI()I+555
j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
j org.eclipse.ui.internal.Workbench$7.run()V+55
j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x016fec00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=300, stack(0xd8f00000,0xd8f80000)]
0x01a5dc00 JavaThread "org.eclipse.jdt.debug: JDI Event Dispatcher" daemon [_thread_blocked, id=292, stack(0xd9000000,0xd9080000)]
0x00a3bc00 JavaThread "Timer-2" daemon [_thread_blocked, id=291, stack(0xd9700000,0xd9780000)]
0x00a41000 JavaThread "Packet Send Manager" daemon [_thread_blocked, id=290, stack(0xd9100000,0xd9180000)]
0x01f73c00 JavaThread "Packet Receive Manager" daemon [_thread_in_native, id=289, stack(0xd9200000,0xd9280000)]
0x00e2a400 JavaThread "Timer-1" daemon [_thread_blocked, id=287, stack(0xd9a00000,0xd9a80000)]
0x0094c000 JavaThread "ServerConnection" [_thread_in_native, id=285, stack(0xd9800000,0xd9880000)]
0x0094bc00 JavaThread "Process monitor" daemon [_thread_blocked, id=284, stack(0xd9300000,0xd9380000)]
0x00895c00 JavaThread "Input Stream Monitor" daemon [_thread_blocked, id=283, stack(0xd9400000,0xd9480000)]
0x01fef800 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=282, stack(0xd9600000,0xd9680000)]
0x00a8b000 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=281, stack(0xd9900000,0xd9980000)]
0x011dbc00 JavaThread "process reaper" daemon [_thread_in_native, id=280, stack(0xd9500000,0xd9580000)]
0x01059800 JavaThread "Worker-24" [_thread_blocked, id=261, stack(0xd9c80000,0xd9d00000)]
0x01059000 JavaThread "Worker-23" [_thread_blocked, id=260, stack(0xde580000,0xde600000)]
0x02176000 JavaThread "Worker-22" [_thread_blocked, id=248, stack(0xddd00000,0xddd80000)]
0x01ff0800 JavaThread "Worker-21" [_thread_blocked, id=247, stack(0xda280000,0xda300000)]
0x00c41c00 JavaThread "Worker-20" [_thread_blocked, id=245, stack(0xdd700000,0xdd780000)]
0x0268bc00 JavaThread "Worker-19" [_thread_blocked, id=243, stack(0xde000000,0xde080000)]
0x0141e800 JavaThread "Worker-18" [_thread_blocked, id=242, stack(0xdda00000,0xdda80000)]
0x019aec00 JavaThread "Worker-16" [_thread_blocked, id=227, stack(0xddf00000,0xddf80000)]
0x0143b800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=223, stack(0xddb00000,0xddb80000)]
0x01022800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=219, stack(0xdde00000,0xdde80000)]
0x00a58800 JavaThread "Worker-12" [_thread_blocked, id=211, stack(0xde680000,0xde700000)]
0x018c5400 JavaThread "pool-1-thread-5" [_thread_blocked, id=187, stack(0xd9d80000,0xd9e00000)]
0x013cdc00 JavaThread "pool-1-thread-4" [_thread_blocked, id=186, stack(0xda380000,0xda400000)]
0x002a4c00 JavaThread "pool-1-thread-3" [_thread_blocked, id=185, stack(0xddc00000,0xddc80000)]
0x0282b400 JavaThread "pool-1-thread-2" [_thread_blocked, id=184, stack(0xd9e80000,0xd9f00000)]
0x018c6400 JavaThread "pool-1-thread-1" [_thread_blocked, id=183, stack(0xd9f80000,0xda000000)]
0x00973000 JavaThread "Timer-0" daemon [_thread_blocked, id=75, stack(0xdd800000,0xdd880000)]
0x00ab8000 JavaThread "Thread-39" daemon [_thread_blocked, id=74, stack(0xdd500000,0xdd580000)]
0x00dc1400 JavaThread "Worker-6" [_thread_blocked, id=73, stack(0xdd900000,0xdd980000)]
0x004db000 JavaThread "Thread-32" daemon [_thread_in_native, id=66, stack(0xda4d0000,0xda4e0000)]
0x011eb000 JavaThread "[ThreadPool Manager] - Idle Thread" daemon [_thread_blocked, id=43, stack(0xdd400000,0xdd480000)]
0x003e6400 JavaThread "Bundle File Closer" daemon [_thread_blocked, id=27, stack(0xde100000,0xde180000)]
0x007c6c00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=26, stack(0xde200000,0xde280000)]
0x001ce800 JavaThread "Java indexing" daemon [_thread_blocked, id=24, stack(0xde380000,0xde400000)]
0x00191400 JavaThread "Worker-0" [_thread_blocked, id=21, stack(0xe2580000,0xe2600000)]
0x01235400 JavaThread "Worker-JM" [_thread_blocked, id=20, stack(0xe2380000,0xe2400000)]
0x007ff400 JavaThread "[Timer] - Main Queue Handler" daemon [_thread_blocked, id=19, stack(0xe2480000,0xe2500000)]
0x0074e000 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=17, stack(0xe2680000,0xe2700000)]
0x00390000 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=16, stack(0xe2780000,0xe2800000)]
0x005c9800 JavaThread "State Data Manager" daemon [_thread_blocked, id=15, stack(0xe2880000,0xe2900000)]
0x00124800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=13, stack(0xe2a80000,0xe2b00000)]
0x00122400 JavaThread "CompilerThread1" daemon [_thread_blocked, id=12, stack(0xe2b80000,0xe2c00000)]
0x00110c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11, stack(0xe2c80000,0xe2d00000)]
0x00118000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=10, stack(0xe2d80000,0xe2e00000)]
0x00107c00 JavaThread "Finalizer" daemon [_thread_blocked, id=9, stack(0xe2e80000,0xe2f00000)]
0x00106400 JavaThread "Reference Handler" daemon [_thread_blocked, id=8, stack(0xe2f80000,0xe3000000)]
=>0x0003d800 JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
Other Threads:
0x00103c00 VMThread [stack: 0xe3080000,0xe3100000] [id=7]
0x0012ec00 WatcherThread [stack: 0xe2980000,0xe2a00000] [id=14]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 40704K, used 18973K [0xf6000000, 0xf9400000, 0xfb800000)
eden space 29568K, 59% used [0xf6000000,0xf714b120,0xf7ce0000)
from space 11136K, 11% used [0xf7e40000,0xf7f7c5c8,0xf8920000)
to space 10432K, 0% used [0xf89d0000,0xf89d0000,0xf9400000)
PSOldGen total 90112K, used 71968K [0xeb400000, 0xf0c00000, 0xf6000000)
object space 90112K, 79% used [0xeb400000,0xefa48298,0xf0c00000)
PSPermGen total 73728K, used 71408K [0xe3400000, 0xe7c00000, 0xeb400000)
object space 73728K, 96% used [0xe3400000,0xe79bc298,0xe7c00000)
Dynamic libraries:
0x00010000      /proj/atelteadm/tools/jdk1.6.0_21/bin/java
0xff3a0000      /lib/libthread.so.1
0xff370000      /proj/atelteadm/tools/jdk1.6.0_21/bin/../jre/lib/sparc/jli/libjli.so
0xff350000      /lib/libdl.so.1
0xff200000      /lib/libc.so.1
0xff390000      /platform/SUNW,Sun-Fire-V445/lib/libc_psr.so.1
0xfe400000      /proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server/libjvm.so
0xff1d0000      /lib/libsocket.so.1
0xff1f0000      /usr/lib/libsched.so.1
0xff1b0000      /lib/libm.so.1
0xff180000      /usr/lib/libCrun.so.1
0xff160000      /lib/libdoor.so.1
0xff080000      /lib/libnsl.so.1
0xfef80000      /lib/libm.so.2
0xff050000      /lib/libscf.so.1
0xff140000      /lib/libuutil.so.1
VM Arguments:
jvm_args: -Xms128m -Xmx256m -XX:MaxPermSize=128m
java_command: /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -os solaris -ws gtk -arch sparc -showsplash -launcher /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix/eclipse -name Eclipse --launcher.library /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher.gtk.solaris.sparc_1.1.0.v20100503/eclipse_1307.so -startup /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -exitdata 74000027 -install /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix -nl en_US -showlocation -vm /proj/atelteadm/tools/jdk1.6.0_21//bin/java -vmargs -Xms128m -Xmx256m -XX:MaxPermSize=128m -jar /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=/usr/local/opt/apssystem/aps_9.1/bin:/proj/aps/bin:/home/ehollis/.afs/0/rbin:/home/ehollis/.afs/0/pbin:/env/seli/bin:/home/ehollis/.afs/0/ibin:/usr/atria/bin:/usr/afsws/bin:/usr/bin:/usr/X/bin:/usr/dt/bin:/usr/openwin/demo:/usr/openwin/bin:/usr/dt/bin:/usr/ccs/bin:/usr/sbin:/sbin:/usr/ucb:/opt/seli/bin:/opt/sge/seli/etegrid/bin:/opt/sge/seli/bctgrid/bin:/usr/ucb:.
LD_LIBRARY_PATH=/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server:/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc:/proj/atelteadm/tools/jdk1.6.0_21/jre/../lib/sparc:/app/gtk+/2.2.2/lib:/usr/sfw/lib/mozilla/
SHELL=/bin/tcsh
DISPLAY=:16.0
HOSTTYPE=sun4
OSTYPE=solaris
MACHTYPE=sparc
Signal Handlers:
SIGSEGV: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGBUS: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGFPE: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGXFSZ: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGILL: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGQUIT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGHUP: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGINT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGTERM: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIG39: [libjvm.so+0x759ae8], sa_mask[0]=0x00000000, sa_flags=0x00000008
SIG40: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
--------------- S Y S T E M ---------------
OS: Solaris 10 10/08 s10s_u6wos_07b SPARC
uname:SunOS 5.10 Generic_142900-13 sun4u (T2 libthread)
vm_info: Java HotSpot(TM) Server VM (17.0-b16) for solaris-sparc JRE (1.6.0_21-b06), built on Jun 22 2010 01:34:33 by "" with Workshop 5.8
Any clues anyone?

get a SIGSEGV every time I use debug mode in EclipseSo if you create a hello world program and then debug it, it crashes?
If yes then the causes would be
1. The VM(s) binaries are corrupted. Plural as it depends on how you run Eclipse.
2. Something else installed on your system at the OS level (or at least always running) is corrupt or is corrupting the OS.
3. A hardware failure.

Application suddenly very slow in debug mode?

I have a WPF desktop application with 10 or so projects. I am using Visual Studio 10.0 SP1. All of a sudden, it has become extremely slow in debug mode - to the point that I can not even debug it.
The same application runs just fine in debug mode on another pc where I am using Visual Studio 2013 Express. I am using SVN to keep the two copies in sync. No new software or windows update has been installed. Even nothing material has changed in the code.
I looked at the VS debug options on both machines and there is no major difference - using default settings.
Any idea what may be wrong? What should I look for?
Thanks.

I take it the path you're using hasn't changed?
You didn't suddenly decide to work off a network drive or pick a very long path to the source ( yes that stuffs things up ).
If you're using the same code and it works fine on one machine but not the other then your visual studio install is probably broke somehow on the slow machine.
I would do an install > refresh.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

How to configure Sql Server 2008 R2 for debugging without disabling Windows Firewall?

When I try to debug a procedure in Sql Server 2008 R2 I get a dialog box telling me to unblock some ports.
>>
The Windows Firewall on this machine is currently blocking remote debugging. Remote debugging requiers that the debugger be allowed to receive informatino from the network. Remote debugging also requires DCOM (TCP Port 135) and IPSEC (UDP 4500
/ UDP 500) be unblocked.
<<
I went to the Windows Firewall and added some new Inbound rules for each of the specified ports (in the images below. But after this and rebooting entire computer -- I still get this dialog box when I want to go into debug mode from SSMS. I can
actually kind of debug standalone code in the SSMS window if I cancel the dialog box. But I can't debug an actual stored procedure -- which is what I need to do. I also noticed that my server has an IP address instead of LocalHost. This is
not a public Server -- it's my private development machine which is on a peer to peer network (with one other workstation), but I don't need that workstation to be able to access this server.. Would localholst make a difference for debugging? How
should I configure the sql server? The firewall?
Rich P

Use PRINT and SELECT for debugging. That's what I do. I used to play with the debugger in SQL 2000 and older days, but I realised that I spent more time on getting it to work that I gained from using it.
I thought about that. I guess that IS the way to go. Very well. Thank you for the suggestion. Although, when the debugger does work in the regular window (not a stored proc because it doesn't work there) the debugger IS nice.
For debugging my proc I am thinking I will insert param vals into a test collection table for now. One obscure error I am getting with a particular proc -- in a When loop on one parameter I get the "value will be truncated" error -- but everything
is set to accept 1000 characters and none of the source data even comes close to 1000 characters. I have isolated at what point the error occurs and which section of data where the error is occurring but I have not isolated the cause of the error.
I cannot reproduce the error when I run the procedure by hand in a regular query window with the exact same code. The error only occurs when the code is run in the stored proc.
Rich P

Start weblogic in debug mode

Hi,
I want to start weblogic in debug mode.
Do you know what modifications should be made in the default configurations?
-John

John wrote:
Hi,
I want to start weblogic in debug mode.
Do you know what modifications should be made in the default configurations?
-JohnWebLogic Server doesn't have a debug mode. Are you trying to see debug
messages in the shell window where you started the server?
~Ryan

Is there a debug mode for Presenter SWF published to a custom LMS?

I've implemented a simple LMS interface (API_1484_11) in JavaScript on the page that loads the SWF generated by Presenter. The SWF is playing fine, and it appears to call the API_1484_11.Initialize() method, but then doesn't call any of my Commit(), GetValue(), or SetValue() methods. Weird thing is that is used to work fine, and I can't figure out what I changed that would break it.
In my Presenter presentation, the Quiz Manager settings have these reporting options:
- LMS set to SCORM (Manifest set to 2004 type)
- Report data set to quiz results and slide views
- Pass or fail set to report complete/incomplete
- Score set to report as percent
- Level set to report interactions and the score
Is there any way to tell the SWF to run in a debug mode so it will provide some sort of information or feedback about what it is doing regarding the LMS interface?

Ugh. So I quit out of my browser and restarted, and now the Presenter Flash is communicating with my mini-LMS interface properly. After Initialize() it calls getValue() and asks for cmi.location, cmi.score._children, etc. values. I think I've seen this happen before, where if I accidentally have two windows with a Presenter Flash object in them, they both stop working with the LMS API until I quit and restart my browser. (I'm on a Mac with Firefox but have seen this on Windows with IE, too, I think.)
But still, I'm wondering if there are any debugging tricks with the Presenter Flash object... or any API documentation for it?

Debug mode in windows 2008r2

Similar Messages

Maybe you are looking for