DEBUG SMTP RCVD : 535 authorization failed (#5.7.0)
i used qmail mail server i ve hosted sevean domains. in that first domain can send the mail messgae , i try the another domains log file display the folowing error ..
DEBUG SMTP SENT: bXJpYmVpcm9AY2VwYXNhZmVkcml2ZS5jb20 =
DEBUG SMTP RCVD: 334 UGFzc3dvcmQ6
DEBUG SMTP SENT: ODM0ODM0
DEBUG SMTP RCVD: 535 authorization failed (# 5,7,0)
Any body have that idea to solve method....................
regards
joswaa
i used qmail mail server i ve hosted sevean domains. in that first domain can send the mail messgae , i try the another domains log file display the folowing error ..
DEBUG SMTP SENT: bXJpYmVpcm9AY2VwYXNhZmVkcml2ZS5jb20 =
DEBUG SMTP RCVD: 334 UGFzc3dvcmQ6
DEBUG SMTP SENT: ODM0ODM0
DEBUG SMTP RCVD: 535 authorization failed (# 5,7,0)
Any body have that idea to solve method....................
regards
joswaa
Similar Messages
-
When I try to send an email message I get smtp error(535) Authentication failed
I use the email from Stevens Inst. of Tech. I can receive messages,but when I try to send one I get the message: SMTP Error (535) Authentication failed. When I try the same thing in Chrome, I have no problem.
Contact your e-mail provider.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
I looked up the error on a search engine.
http://www.bing.com/search?q=SMTP%20Error%20%28535%29
Check that you are using the correct user / password. -
i used Nokia Messaging with 2 email address (yahoo.co.id domain) but today one of them cannot send email. always get 535 authorization failed.but i can receive email. ive tried to remove and add it again but no luck...
i get this error again on the same account ... ( what should i do ? is this Yahoo problem or Nokia Messaging problem ??
-
Analysis Authorization failed for Multiprovider
Hi all,
We are facing an issue pertaining to the Analysis Authorization for a multiprovider. When we attempt to access a query base on a multiprovider, the program complains that it has insufficient authorization. So we did debugging in the customer exit and we realise it fails to populate the rest of the authorization variables in I_step = 0. Base on our initial investigation this only happens on queries on multiprovider, so is there anything I need to set or do to curb this error?
Many thanks!Best solution is to trace the authorization for your issue in ST01.
Switch on the trace in ST01 and start your work. if you face authoirzation check failed. look into the trace there you will find the logs and authorization failed for your userid.
And one more thing, have you got anything in SU53 as authorization check failed?
Hope this would help you. -
ISE Alarm (WARNING): Dynamic Authorization Failed for Device
Hi all,
I am posting this discussion as previous posts that I have found in this forum have never been resolved or the resolution is not applicable to me.
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is reffering to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which correcponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
Can someone suggest the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Runtime AAA & prrt-JNI.
I do not want to enable too much debug logs, so I was wondering whether anyone can help with a specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
Can anyone help?
thanks
MarioFirstly, I wouldn't run a production deployment of ISE on 1.1.1.... 1.1.3 Patch 1 or 1.1.4 is the way to go.
Secondly, this error happen a lot, especially with Wireless, and it's not worth worrying about. I've had a couple of TAC cases opened for this and some similar errors, generally they're caused by a Client going to sleep, leaving the coverage area or otherwise leaving the WLC while ISE is trying to do something with it.
Only worry if you actually have a Client-impacting problem, which by the sounds of it, you don't. -
10.6.4 Server L2TP VPN using external RADIUS - Authorization Failed
I'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah maysI'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah mays -
Oracle MetaLink authorization failed.
In our Environment (GC Version 10.2.0.3 on Linux ), we are using Proxy to connect to Internet and our GC server is behind the Firewall. When I try to enter the metalink user name and Password in "Metalink and Patching settings" tab, getting the below error.
"Oracle MetaLink authorization failed. - Check the spelling of your username and retype the password, making sure that caps lock is off"
But username and pwd are correct. Could any one pelase help me on this issue?
With best regards
ShanHi. i have the same problems with my dbconsole on every server.
it seems to be a certficate error! but we have no solution to this failure;
you can debug this from your system (for example Solaris10):
wget -v http-user=METALINKUSER http-passwd=PASSWORD 119255-01 verbose debug save-headers server-response https://getupdates.oracle.com/readme/119255-01 -O 119255-01.readme
... you get:
CONNECT getupdates.oracle.com:443 HTTP/1.0
User-Agent: Wget/1.12 (solaris2.10)
---request end---
proxy responded with: [HTTP/1.0 200 Connection established
Initiating SSL handshake.
Handshake successful; connected socket 4 to SSL handle 0x00095ba0
certificate:
subject: /C=US/ST=California/L=Redwood Shores/O=Oracle Corporation/OU=Global I
T/OU=Terms of use at www.verisign.com/rpa (c)10/CN=*.oracle.com
issuer: /O=VeriSign Trust Network/OU=VeriSign, Inc./OU=VeriSign International
Server CA - Class 3/OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97
VeriSign
ERROR: cannot verify getupdates.oracle.com's certificate, issued by `/O=VeriSign
Trust Network/OU=VeriSign, Inc./OU=VeriSign International Server CA - Class 3/O
U=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign':
Unable to locally verify the issuer's authority.
To connect to getupdates.oracle.com insecurely, use `--no-check-certificate'.
Closed 4/SSL 0x00095ba0
After Download getupdates.pem:
wget -v http-user=METALINKUSER http-passwd= PASSWORD ca-certificate=getupdates.pem 119255-01 verbose debug save-headers --server-response https://getupdates.oracle.com/readme/119255-01 -O 119255-01.readme
you get:
Initiating SSL handshake.
Handshake successful; connected socket 4 to SSL handle 0x00095e30
certificate:
subject: /C=US/O=Akamai Technologies, Inc./CN=a248.e.akamai.net
issuer: /C=US/O=GTE Corporation/OU=GTE CyberTrust Solutions, Inc./CN=GTE Cybe
rTrust Global Root
X509 certificate successfully verified and matches host a248.e.akamai.net
---request begin---
GET /f/248/21808/15m/sun.download.akamai.com/21808/patches/patchroot/readme/1192
55-01.README?AuthParam=1291634412_c952739530921a329433b81c1d644b89&TicketId=C1lW
%2BkiJVFA%3D&GroupName=SWUP&FilePath=/21808/patches/patchroot/readme/119255-01.R
EADME&File=119255-01.README HTTP/1.0
User-Agent: Wget/1.12 (solaris2.10)
Accept: */*
Host: a248.e.akamai.net
and you can get the file.
Any ideas? -
Email: SMTP error 535 5.7.3 Authentication Unsuccessful
I get the following Lookout error when using the Mailer object to send emails:
Email authentication is failed. SMTP error 535 5.7.3 Authentication Unsuccessful
It works just fine from my office location and other locations, but when I run the same program at my customer's location I get the above error.
I had the IT tech at AT&T open up port 25 on my customers internet account. Before she opened up the port, all I would get
is the error: Timeout during connection to SMTP server.
We use our company's SMTP server in the Mailer object, The SMTP requires authenticationHi Marelise,
For now, I have enabled these accounts, but in such cases, it is recommended to reach out to chat support or submit a ticket to get faster resolution.
Do let me know if you have any question. -
AAA Authorization Fail between WLC 2125 & LWAP 1042n
In my Wireless environment, WLC 2125 is connected to a LWAP 1042n. The WLC is succesfully providing DHCP IP to the AP but is unable to discover it. All are connected. During debug mode following error message is encountered in WLC 2125, "AAA Authorization Fail....".
Please suggest what to do.Here is a good doc that explains different errors:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml -
AAA authorization fails, but still command is executed...
Hi everyone,
i've implemented authorization and it basically works. The user can only use a limited set of commands (show int status, conf t, interface ethernet, interface gigabitethernet, interface fastethernet, shut, no shut).
Now I try to configure a loopback or Vlan interface, which should not be allowed.
COMMANDS IMPLEMENTED:
aaa authorization config-commands
aaa authorization commands 0 vty group tacacs+ none
aaa authorization commands 1 vty group tacacs+ none
aaa authorization commands 15 vty group tacacs+ none
line vty 0 15
authorization commands 0 vty
authorization commands 1 vty
authorization commands 15 vty
COMMAND AND OUTPUT FROM TESTING:
SWITCH(config)#int vlan 2
Command authorization failed.
DEBUG AAA AUTHORIZATION:
SWITCH#
Dec 7 14:31:50: AAA: parse name=tty1 idb type=-1 tty=-1
Dec 7 14:31:50: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
Dec 7 14:31:50: AAA/MEMORY: create_user (0x46603F4) user='USER1' ruser='SWITCH' ds0=0 port=
'tty1' rem_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15 initial_task_id='0', vrf= (id=0)
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port='tty1' list='SCAS' service=CMD
Dec 7 14:31:50: AAA/AUTHOR/CMD: tty1 (60725991) user='USER1'
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV service=shell
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd=interface
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=2
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found list "SCAS"
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Method=tacacs+ (tacacs+)
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): user=USER1
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV service=shell
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd=interface
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=2
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: AAA/AUTHOR (60725991): Post authorization status = FAIL
Dec 7 14:31:50: AAA/MEMORY: free_user (0x46603F4) user='USER1' ruser='SWITCH' port='tty1' r
em_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15
As you can see the reply from the Tacacs is a "FAIL", but still the command is executed.
RESULT:
SWITCH#sh run int vlan 2
Building configuration...
Current configuration : 38 bytes
interface Vlan2
no ip address
end
QUESTION:
I don't understand what the problem is...Since I get a FAIL from the Tacacs Server I assume that the configuration on that side is fine.
But why would the switch ignore a FAIL and still execute the command? Same problem exists with the Loopback-Interface.
Is this me not understandig the basic concept of AAA or is this some other problem?
The Switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9-mz.122-50.SE2.bin).
The Tacacs runs Cisco Secure ACS4.2.0.124
Thanks,
TomHi Tom,
this is CSCtd49491 : TACACS+ command authorization for interface configuration fails .
The bug is currently in a Closed state, meaning that the "Bug report is valid, but a conscious decision has been made not to fix it at all or in all releases."
As far as I can tell, the impact is rather limited since the interface that gets created will have no effect unless the vlan exists, and even then the effect is minimal since it cannot be configured.
You may want to open a TAC case or work with your account team to get the bug re-opened if this is still a concern though.
hth
Herbert -
Command authorization failed ACS 5.6
I have a new ACS 5.6 appliance set up that uses Active Directory authentication.
I created a shell profile, mapped it to the authorization rule, and then added devices to the system.
The first device I added was able to use ACS to authenticate and authorize users without any issues. In the ACS logs, it shows me log in and get the shell profile/privileges (15).
The second device I added authenticates me, but then I get a "command authorization failed" message every time I try to do something. In the ACS logs, it shows me log in (using AD), and get the same shell profile (level 15). Not sure what the problem is.
Here are the AAA settings on the switch
aaa authentication login listASH group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec listASH group tacacs+ local
aaa authorization commands 0 default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
tacacs-server host 10.1.2.212
tacacs-server timeout 3
tacacs-server directed-request
tacacs-server key <key>
line vty 0 4
access-class vty-access in
logging synchronous level all
login authentication listASH
transport input ssh
Network connectivity is fine, and obviously, the key works (because I authenticate). Nevertheless, I cannot get proper authorization.Hmm, the config looks correct, especially if it works on one device but fails on the second. Have you tried to issue some debugs and see if you are getting any errors?
debug aaa authentication
debug aaa authorization
debug tacacs authorization
Also, is there a version of code difference between the two devices? Perhaps you are hitting a bug.
Thank you for rating helpful posts! -
Authorization failed when trying to connect Hyperion to BW 7.0
Hello gurus,
Using Hyperion interactive Reporting Studio, I try to access BW cubes.
I select OLE DB as connection type and SAP BW OLE DB provider, I am prompted for a BW system to connect to.
I then get the following error message:
OLE Error: 80040e4d
Error Source: MDrmSAP.2
Error Desciption: Authorization failed.
Using the same BW provider and the same BW user, I am able to connect form Excel.
So I wonder what the problem is.
Help really appreciated.
Alex-Hi Ingo,
I do not get any error while using the Universe Designer, I get this error when trying to connect a SAP BW related universe in Crystal Reports. There is no problem at all with WebIntelligence by the way. It is possible to connect a SAP BW related universe in WebIntelligence.
I use BO XI 3.0 with Crystal Reports 2008 and the SAP Integrations Kit client components are installed on the client machine.
Nevertheless the BO Enterprise system is not configured with SAP Authentification, but with an own authentification.
Best Regards,
Thomas -
ISE: Dynamic Authorization Failed
Hi,
I am gettning warning messages in ISE saying
Cause:
Dynamic Authorization Failed for Device: 0002SWC003 (switch)
Details:
Dynamic Authorization Failed
It is not only on that switch but on all switches I have configured. I am using 3560 IPBase 12.2(55)SE6. I have configured them according to Trustsec 2.1.
My end devices are none-802.1x.
I can't figure out what is causing this error.
The thing is that I have not experienced any problem. In Live Authentications there are some 'Unknown' and 'Profiled' devices hitting the DenyAccess rule, but other then that everying is beeing Authorized fine.
Anyone got an idea what could be causing this error?
Regards,
PhilipThis is what I have found out.. Using ISE Version 1.1.1.268. If you go the logs page
Jan 10,13 7:39:12.147 AM
Dynamic Authorization failed
and then go to the details...
Failure Reason > Authentication Failure Code Lookup
Failure Reason :
11213 No response received from Network Access Device
Generated on:January 10, 2013 8:08:17 AM PST
Description
No response received from Network Access Device.
Resolution Steps
Check the connectivity between ISE and Network Access Device. Ensure that ISE is defined as Dynamic Authorization Client on Network Access Device and that CoA is supported on device.
...next check into Resolution Steps... -
5417 Dynamic Authorization failed
Hi guys,
Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ?
When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow.
The error is :
Event
5417 Dynamic Authorization failed
Failure Reason
11103 RADIUS-Client encountered error during processing flow
Resolution
Do the following: 1) Verify shared secret matches on the ISE Server and corresponding AAA Client, External AAA Server or External RADIUS Token Server. 2) Check the AAA Client or External Server for hardware problems. 3) Check the network devices that connect the AAA peer to ISE for hardware problems. 4) Check whether the network device or AAA Client has any known RADIUS compatibility issues.
Root cause
RADIUS-Client encountered an error during processing flow
I checked all the resolution steps but the error sitll exsit.
I would greatly appreciate any help you can give me in working this problemAn internal error has been detected during the processing of an incoming RADIUS packet. Make sure that the client device is compatible with AD Agent, has been configured properly, and is functioning properly. Make sure that the same RADIUS shared secret has been properly configured, both in the client device and in AD Agent.
http://www.cisco.com/c/en/us/td/docs/security/ibf/setup_guide/ad_agent_setup_guide/ibf10_log_msgs.html -
hi
I keep getting error meesages on the ISE in regards to RADIUS
the error is
Dynamic Authorization failed : 1213 No response received from Network Access Device
i am using ISE version 1.1.1 and the NAD is a WLC running version 7.0.98.0
i use ISE to authenticate users via PEAP. I deleted the NAD and re-added it twice but i still keep getting this issue. this set up was working fine for the last few weeks.
i dont think location and device type would cause an issue to authentication under the NAD list
anyone have any ideas?the option i.e drop down box wasnt there. lookin at the compatibility chart of ISE 1.1.1 and WLC, minimum version for WLC is 7.2.103.0
Do you need to have RADIUS NAC enabled if the ISE is only used to authenticate corporate wireless users against AD. there is no CoA,
the other function is to use RADIUS as network management logon. to WLC using the AD. depending on the AD group , one could get priv 15 or priv 5 access. i am also using device attribute by location so that remote offices network enigineer cannot log onto the WLC. i.e i created a NAD , put it in a location and use that location AND the AD group to qualify for priv 15 access.
Coudl this policy interrupt the wireless RADIUS policy? Wireless policy is at the top of the list under authorization tab.
Maybe you are looking for
-
I installed the ATI drivers just as it said to do on the wiki. The 2612-cko2-swsusp2 kernel compiled just fine as did the ATI drivers. I rebooted, started KDE...no direct rendering. I decided I might try the ATI graphical installer, despite the fact
-
Hi, in rpt i need to show the diff b/w 2 dates. i.e., (END_DATE- START_DATE). so i have created 2 formula variables on END_DATE- START_DATE. i just wanna confirm whether i created it properly or not. Procedure: Under Formula Variable-->New Variable.
-
Regarding vendor master record's creation
hi sap gurus, can anybody tell me how i can check who(user's id) made (vmr-xk01) in sap. so plz can anybody hel pme out
-
I need to update a record on page load. Basically, I need to keep track of new content for users, so if they've viewed it, it changes the viewed column from 0 to 1. any suggestions?
-
Port mirroring with ALOT of Drops Tx on a 5406zl
Hi everybody. My first post here and I'm convinced that the questions I have will be easily answered by several of the true experts that reside here in the forum. Question #1. I've set up port mirroring this way on my HP procurve J8697A Switch 5406zl