Debugging at DTP level

Hi,
Friends how to do Debugging at DTP level.
Regards.
Asim

Hi,
Following are some of the techniques.
Write Break-point in the code Start routine or in field routine you want to debug
And execute in simulate mode which will help you in stopping at the point you need.
Else
Go to expert mode and select the record to be debugged ie enter the selection condition filter for debugging
and enable check after extraction after start routine like that and search for the code written to debug
and keep the break point over there
Thanks,
Arun
Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:32 PM

Similar Messages

How to debug through DTP in quality?

Hi Experts,
Please shed some light on how to debug through a DTP in quality? I am not able to find my code.
I have a charcteristic routine & end routine written.
I am able to get to the debugger screen, through DTP ( serial debugging) / manage DTP.
But i am not able to find my code.
Sharat

HI
Try to change the breakpoints (see push buttons). I think by default none is set.
/people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request

Psa level 91 records ,dtp level 0 records

Hi friends,
i have run the process chains daily still in yellow color infopackage run , dtp not run in psa level records are ther 91 dtp level it shows 0 records.
errors are
1)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_SCL has status Undefined (instance )
2)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_ITM has status Undefined (instance )
3)Process Generate Index, variant Generate Index for Purchasing has status Undefined (instance )
     Process OR (Each), variant Every has status Undefined (instance )          Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400 ->
4)0PUR_C01 has status Undefined (instance )Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400
5)0PUR_C04 has status Undefined (instance )

i got the same error, do u know how you fixed yours

Debugging the isolation level

          Does anyone know of a way to capture the current isolation level for a given transaction,
          in particular w/ a CMP entity bean?
          I'm using the P6SPY driver to capture debug information, but I never see a call
          to Connection.setTransactionIsolation(). Therefore, I have no way to know if
          my transaction is running with Serializable level, the level I've set in my weblogic-ejb-jar.xml
          file.
          Running WLS 6.1 and JConnect 5.5.
          Thanks,
          Jim


          Just tried the code below. Compiles -- that id good ;)
          When I'm outside transaction I get weblogic.transaction.TxHelper.getTransaction()
          == null.
          That is to be expected.
          When I'm inside transaction the property value is null. Properties that I can
          get:
          [0] key
          weblogic.transaction.name val [EJB om.moveitonline.framewo
          [1] key weblogic.jdbc val t3://10.1.26.51:7001.
          Questions:
          a) How to get the isolation level anyway?
          b) What are the integer values for isolation levels (i.e. constants)?
          Rob Woollen <[email protected]> wrote:
          >Try this:
          >
          >Integer iso =
          >weblogic.transaction.TxHelper.getTransaction().getProperty(weblogic.transaction.TxConstants.ISOLATION_LEVEL);
          >
          >-- Rob
          >
          >
          >Jim clark wrote:
          >> Does anyone know of a way to capture the current isolation level for
          >a given transaction,
          >> in particular w/ a CMP entity bean?
          >>
          >> I'm using the P6SPY driver to capture debug information, but I never
          >see a call
          >> to Connection.setTransactionIsolation(). Therefore, I have no way
          >to know if
          >> my transaction is running with Serializable level, the level I've set
          >in my weblogic-ejb-jar.xml
          >> file.
          >>
          >> Running WLS 6.1 and JConnect 5.5.
          >>
          >> Thanks,
          >> Jim
          >

Debugging at PSA level

Hi All,
I need to delete a few records in field "ERDAT" in PSA. I've followed the steps to get to Debugging at PSA (using SE11). Now, I've no clue how and what to do to delete the records in the debugging mode for this field. Can you guyz please help me out.
Thanks,
Regards,
G.

Hi,
1)       Go to table --> Contents --> Select the records which you want to delete
2)       Now enter /h in the transaction bar
3)       Now select the records which you want to delete and double click on it
4)       Itu2019ll take you to ABAP debugger screen, Hit F7
5)       You will see this code u201C if code = 'SHOW'   u201C
6)       Double click on the CODE , now you can see this in Field names and also Show in field contents
7)       Now Remove show and replace it with DEL (only in caps) and then click on Pencil Symbol (Change) and hit F8
8)       Now you can delete the records by clicking in Delete Entry
Edited by: YJV on May 10, 2011 8:12 AM

Debugging a DTP

Hello,
is it possible to debug record-wise and not only package-wise?
Thank you + regards,
Ingo

Hi,
Please post this question in 'BI Netweaver 2004s' forum?
Thanks

Purchasing transaction data load error at DTP level.

Hi All,
we are doing daily load for the MM Purchasing Transaction data.
Today it failed while it is loading from2LIS_02_SCL( PSA) to DSO.
The error message is like this.
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from '1052332762320000.00'
The error was triggered at the following point in the program:
GP46PDVI7I2JSVXEJSYCMP7PAFB 1773
Request to help in Correcting this error.
Thanks,
Manu.

Hi,
The value exceeds the maximum value of any integer ABAP type, and is the source of error.
Try to identify the record in the source system and fix it there, repeat load. Else look it up on the PSA and fix.
Regards,
Arek

Use of "with master data & with out master data" at DTP update level

Hello experts,
In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
Thanks in advance,
Zakir.

HI
HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
Load the relevant master data before you load the transaction data.
If you set this indicator, the system terminates activation if master data is missing and produces an error message.
If you do not set this indicator, the system generates any missing SID values during activation.
In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
thx
vijju

Is Debug (simulate) option working in 2004s for DTP?

Hi,
Could anyone please shed some light on how to use this debugging feature for debugging a DTP? Do I need to change the Breakpoints? And if there is an option to change breakpoints, I'm assuming that I don't need to have any breakpoints added to the code? I'm currently on 2004s SP7. Thanks!

Hi Bhuvana,
as a pre-requisite you need some data in the PSA , since otherwise, your process will not even reach the transformations.
The proceeding should work as follows:
1.) Enter the transformation you want to debug
2.) Pick the menu entry "Extras --> Generated Prgogram", and set a user break-point at the position you want to debug.
3.) Enter the maintenance of the corresponding DTP.
4.) Switch the execution mode to "Serially in the Dialog Process (for Debugging)" .
5.) Switch on any of the break-points needed by using the respective "Change" button, e.g. "Extaction Data Source" --> "Before Transformation".
6.) Execute the DTP. It should now stop first at the break-point defined 5.) and also in the break-point defined in your generated program for the transformation (see step 2.)).
Cheers
SAP NetWeaver BI Ogranisation

Dtp debugging

Dear all,
i m trying to debug the dtp with start routine as a breakpoint.i am giving all data packaeges but it is not getting into the start routine.process ends suddenly and in the log control is not going inside start routine.this is a dtp to load data from psa to infoobject.
it says "No Data Available" and "End of Processing" in simulation dtp details tab
please advice

Hi Sushanth,
You can debug your routines in two ways.
one way is goto your DTP, in the execute Tab Page, change execution mode to "Serially in the Dialog Process (for Debugging) in the drop down box with expert mode checked. Now select the break points needed by using the respective "Change" button for before and after transformation .Execute the DTP. It will take you to the debugging screen here set the break points and debug the code.
second way is to pic the Transformation id and goto table trans and get the program id and add GP to the program id to get the program name.
Now goto se38 and execute the program and set the break points and run the DTP in simulation mode with expert mode option ticked.
Or you can get the generated program from menu --> display --> generated program(here u will get the routines used in the Transformations).
Regards
KP
Edited by: prashanthk on Jul 13, 2010 11:50 AM

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

DTP picking 0 records

Hi Experts,
I laoded data till PSA using infopackage; got around 7000 records. And when I executed the DTP these records are not picked and resulted in 0 records in DSO. There are no filters in DTP level.
Please advice. This is in production system

Hi,
What is the update from PSA to DSO at DTP level?
Under Execution tab processing mode shuld be: Serial Extraction and processing of source package...
rgds,

Data Package 1 ( 0 Data Records ) at DTP with Status RED

Hi All,
For 0 records at DTP level it is showing Overall status & Technical status as RED and yellow beside Data Package 1 ( 0 Data Records ). There is no short dump no error message. At PSA level in status tab the message displayed is Status 8 which says no data on R3 side for this particular load. Help me out.
Regards,
Krishna.

Hi,
if traffic light is not highlighted, you are probably running a delta.
You will have to set the traffic light in the according init.
(and run init again )
the setting in the delta will be the same.
Udo

Error when DTP

hi all,
when iam trying to load data to info cube through DTP from source system(data source) it giving below mentioned error.
Transformation inactive; request cannot be executed
Message no. RSBK257
Diagnosis
A transformation called up by the request is inactive.
System Response
Request processing has been terminated.
Procedure
Activate your transformation. It connect source &v1& with target &v2&.
i have checked that no transformation is inactive but it gives the same error.plzzzzzz help me how to solve this issue.
regards.
Vamshi D Krishna

I had an experience with similar issue
Transformation Inactive;request cannot be executed
Message no. RSBK257
By debugging that DTP load, we found the root cause of problem, which is the following.
Error when writing the SID 10033950 (value "10033950") in table /BIC/SZPERSON
Since, a particular record can't be deleted from PSA, I modified that record in PSA and tried a load, but no use.
To fix this, I deleted (from SE14) complete data from the above SID table, and scheduled the main PC in Dev, and it worked fine this time.

Syslog logging level 0 - 7

hello sir,
i would like to setup a syslog server and the switches will forward the log file to syslog server to analyst.
please kinldy share with me Level 0 (emergency) to Level 7(debugging mode).
which level i should set then only can trace the user login and configuration changes on the switches?
or any configuration that able to track this and send to syslog server?

Hi,
Would the following be something that youre looking for?
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtconlog.html

Debugging at DTP level

Similar Messages

Maybe you are looking for