Psa level 91 records ,dtp level 0 records

Hi friends,
i have run the process chains daily still in yellow color infopackage run , dtp not run in psa level records are ther 91 dtp level it shows 0 records.
errors are
1)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_SCL has status Undefined (instance )
2)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_ITM has status Undefined (instance )
3)Process Generate Index, variant Generate Index for Purchasing has status Undefined (instance )
     Process OR (Each), variant Every has status Undefined (instance )          Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400 ->
4)0PUR_C01 has status Undefined (instance )Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400
5)0PUR_C04 has status Undefined (instance )

i got the same error, do u know how you fixed yours

Similar Messages

Multi Level Categorization in Interaction Record

Hello Gurus!
We are implementing CRM 7.0 and setting up multi level categorization for interaction records and service ticket. I have managed to set up all the required config and the categorization schema in Web IC. It is working in service ticket. However, for interaction record in web IC, the problem is that in the Categorization Tab, there are no fields showing up. I tried adding the fields but there seems to be none similar to service ticket where the fields for Level 1, Level 2, etc... can be seen.
Have you got any idea on how to make the Level fields show up in the interaction records so we can test the multi level categorization for IR?
Thanks!

Glen,
I have gone into IC manager role and used categorization schema and i cannot see my customized Catalog for Business activity.
I have checked Category of the catalog which i have manually created and it is "Activity-reason" .
I have tried using the default catalog and added my Codes into it and created Scema but i do not see the categorization in Web IC and more over the Subject feild is in active. I have added the code groups and code feilds and they are displaying a error message.
Thanks Amar

When we drilldown at document level it displays one record for each cube

Dear Experts .
The users want to see the report by status for the order detail report at document level it displays one record for each cube .
They want to see the single line for the order quantity , Amount, Billing quantity delivery and amount along with the Sales order number , billing document number billing date , delvert date ..et in signgle line. ( Sale order DeliveryBilling)
When we are doing on Multiprovider recording displaying from each cube.
We have tried with Constant selections and it is not giving the required results m since these want to see by status. Due to huge data performance reasons we re unable to use it .
Please provide your valuable inputs.
Thanks,
Mahesh.

Mahesh,
If you want to get detail data with respect to Sales order - delivery - Billing, on top of Multiprovider you can come up with Constant selection.
But I am not clear that why constant selection is not working properly, can I have some light on that.
Probably, you are struggling with multiple records .
I suggest you to go with end routine and map all fields to one IC and do reporting on that single IC, then your requirement will fulfill.
But here we need to take care of performance issues and process chain scheduling wile loading deltas.
If Multiprovider is not working properly , then try with Infoset(If you have more than 2 ICs it not possible).
Regards,
rvc

Recording line-level input with Griffin iMic

I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
iBook G3, 1.42 Mac mini G4 DVD±RW Mac OS X (10.3.9) 640Mb SDRAM, 1gb DDRAM

I'm trying to digitize an audio cassette with
Soundtrack Pro. My setup includes a Griffin iMic
that goes to a USB port. The trouble I'm having is
in controlling the input volume. The level meters
indicate clipping, but I'm not clear how to set the
input level.
If it's in the Recording tab (>Input) with the Gain
slider, mine is greyed out.
M Wohlgy,
(I know this is months after your post.)
Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
I use the iMic exclusively.
David

Record column level changes of table for audit.

Hi Experts,
I need suggestion on recording column level changes in table for internal aduit purposes, our company policy does not allow us to enable CDC and CT on database levels so I am looking for whar are other the best ways for doing the same ?
I know we can use triggers and OUTpUT clause to record the changes on tables but Is there any other light weight solution for recording changes on transactions tables which very gaint tables.
Seeking your guidnace on solution side ?
Shivraj Patil.

OUTPUT should be the best choice for your case as this would be much lighter than Trigger.

Authorization level check for Condition records.

Hi,
Hi Gurus,
Pls help me out in the the following scenario.
I want to activate Authorization level check for Condition records.
For example, Product price PR00 is being entered by first level.
After verification done by second level only, that condition record to be used for sales order processing.
I have gone through Process status & Release Status. But once it is Blocked i am not able to release it...
Rgds,
Amol

Amol,
Please confirm transaction code you are using in this scenario to release. I can help with this, just a little more detail.
Thanks,
Jay

How record line-level stereo input on GarageBand iOS?

I'd like to record line-level stereo input sent from my Mackie mixer to GarageBand on my iPhone 4S. I tried plugging a standard 1/8" stereo cable into the headphone jack, but no luck. The GarageBand manual suggests that this is possible, and there is one (pricey) cable I've found that seems to handle this, but it claims that the audio input is mono only, suggesting that I may need a cable connection to the dock (not the headphone jack) to handle stereo. I can't find a cable to do this, however...ideas?
Many thanks,
Jim

Sonoma Wire Works' "GuitarJack Model 2" iOS peripheral can help you do that. It's expensive though.

Debugging at DTP level

Hi,
Friends how to do Debugging at DTP level.
Regards.
Asim

Hi,
Following are some of the techniques.
Write Break-point in the code Start routine or in field routine you want to debug
And execute in simulate mode which will help you in stopping at the point you need.
Else
Go to expert mode and select the record to be debugged ie enter the selection condition filter for debugging
and enable check after extraction after start routine like that and search for the code written to debug
and keep the break point over there
Thanks,
Arun
Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:32 PM

Warning message required in po to identify whether price is taking from info record or condition record

Hi experts,
while creating purchase order,If condition record and info record both are exists means how system will identify that which price need to pick for particular vendor.
Is it possible to set warning or error message for above mentioned scenario.
Thanks ,
Deepika.

If an info record has no price conditions itself then the price is determined from the last PO.
It is not always table A017, there are more tables for conditions to the info record, e.g. A018 and A025, this is dependent on the level of your info record which can be created at plant level or at purchasing organization level (no plant entered), with or without material number.
For more detailed information see the docu in help.sap.com: Price Determination - Purchasing (MM-PUR) - SAP Library
and the OSS note 456691 - FAQ: Price determination in purchasing
and 569885 - About Info Record Update indicator (EKPO-SPINF)

Client level, plant level and material level batch

Hi,
Can any body tell me wat is the actual meaning of
!) Client level batch,
2) plant level batch,
3) material level batch
with exa. please.
Thanks
Nilesh Ithape

Hi,
Below is the extract from the IMG Documentstion..
====================================================================
Batch numbers can be unique at the following levels:
at plant level
at material level
at client level for a material
If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to batch numbers within Inventory Management using a transfer posting 'material to material'.
If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
=========================================================
Hope this helps..
Regards,
Siva

Analog Levels vs SPDIF Levels Input and Output in Logic Pro

Hello,
I ran a test last night for recording input and output levels from my Yamaha Motif XS8 through an Apogee Ensemble to compare Analog to SPDIF
I connected two TRS cables from the L and R outputs on the Motif XS into the Analog Inputs on the Apogee and also have the SPDIF connection from the Motif to the Apogee.
I put the master fader all the way up on the XS for the volume for analog.
The ensemble in Maestro has a +4 and -10 reference notional level option for analog inputs. i had it at +4 but changed to -10 and the analog got louder (i figured it would get louder for +10, confusing).
anyways, why is it that I can record louder levels for analog than the digital transfer?
I tracked both options at the same time then recorded vocals over it. the digital sound is too low. what's up with that?
and when I tried to bounce the recording to listen to it in ITunes, the volume levels were way lower than my cd playing through iTunes. Please enligthen me on these?
I use to record in a Roland 2480, and had similar results with loudness, but got a little louder through mastering but still....pro cds are way louder and still clear.

I think there is much confusion here!
In summary, you wont be able to control the recording level of S/PDIF.
The reason is that you don't want to!
You need to think of the SPDIF connection as being more like a file transfer method. You are copying the digital data at an output to your harddrive in effect. If I send you an MP3 via email you'd never imagine that your email software is capable of changing the gain of the MP3 I send you. This might sound daft but its a useful analogy. If you need to increase the "volume" of that MP3 then you'd need to ask the sender. Its the same with your set-up.
There could well be somewhere on your synth that adjusts the instruments level, other than the master (analogue) output control. For example, make sure the midi volume of the intrument being played is set to full - ie midi vol 128. Perhaps there is somesort of virtual mixer onboard to control all the muti-timbral parts so make sure your part has its virtual fader turned up.
This is what (basically) is going on in the chain...
Your synth creates sound in its "digital brain". This sound is sent to an "output stage" which will distribute the sound to various outputs. In the case of the S/PDIF it will just send the raw digital data untouched. For the analogue side the digital signal (same as the one sent to S/PDIF) will be converted to analogue and then sent to a amplifier to get it to an appropriate "line level". This final level could well be controlled by an anogue volume control which could be adding more gain (than you think) too.
When things go to your sound card/ daw...
The purpose of a analogue gain control is to set the i/p signal so that it suitably loud to beat any noise that exists in your input circuits - so that a good signal to noise ratio is achieved. Analogue signals need to work in the right loudness zone (so to speak) as the analogue electronics will be designed to handle signal levels of a particular range. the gain control is there to make sure the signal is in that range.
Digital signals are far more predictable though and there is no advantage to your recordings if the incoming digital signal gets an increase of level at the input stage. All you are doing here is effectively adding a few zeros to the binary digital data!
Lets face it the point of recording is to get a copy of the original sound, that is as similar to the original as possible. With S/PDIF you get a perfect copy of what's coming out of your synth - so job's a good un!
If, when you come to mix in logic, you find the level of the digital recording is indeed too low for mixing/mastering purposes then just boost it in logic via a fader or via the gain plugin.
Those referrence values of -10dBV and +4dBu refer to analogue voltage levels only. they have nothing to do with the digital domain. The -10/+4 switch will be only relevant to analogue inputs and outputs. Using an analogue VU meter you should find that a sine wave that peaks at 0dBVU (totally different to 0dBFS BTW) is the equivant of a digital sine wave peaking at -18dBFS.
The analogue headroom (how loud you can go before things distort) depends on the analogue electronics and varies with different design. Analogue stuff, like mixers) often has headroom of 24dB or more. So that digital stuff can interface with analogue properly we allow for that analogue headroom to be around 18dB (usually enough in practise!)... hence -18dBFS(digital)=0dBVU(analogue).
To make your digital and analogue input signals sound similar in level you will probably have to reduce the gain of the analogue input. If you set the incoming analogue signal to peak around -14dB (or less!) or so you will probably find things more equal. If you are working in 24 bit your analogue levels can be seemingly very low before sound quality is affected. Its quite safe to record at -20 or even -30dB as shown on logic's meters for eg.
I hope all this waffle helps LOL!

Client level , company code level , chart of account level

Hi experts
Pls expline me which are we define under client level , company code level and COA level
like :
1) field status variant:
2) Dunning procedure:
3) document types:
4) doc.number range:
4) posting periods variant
5) controlling area
6) account groups
7) vendor/cust master data
8) dep key
9) chart of dep area
10) like...............................
get points
Geeta

hi geeta,
ClientA Client is the highest unit within an SAP system and contains Master records and Tables. Data entered at this level are valid for all company code data and organizational structures allowing for data consistency. User access and authorizations are assigned to each client created. Users must specify which client they are working in at the point of logon to the SAP system.
A CompanyA Company is the unit to which your financial statements are created and can have one to many company codes assigned to it. A company is equivalent to your legal business organization. Consolidated financial statements are based on the companyu2019s financial statements. Companies are defined in configuration and assigned to company codes. Each company code must use the same COA( Chart of Accounts) and Fiscal Year. Also note that local currency for the company can be different.
Company CodesCompany Codes are the smallest unit within your organizational structure and is used for internal and external reporting purposes. Company Codes are not optional within SAP and are required to be defined. Financial transactions are viewed at the company code level. Company Codes can be created for any business organization whether national or international. It is recommended that once a Company Code has been defined in Configuration with all the required settings then other company codes later created should be copied from the existing company code. You can then make changes as needed. This reduces repetitive input of information that does not change from company code to company code as well as eliminate the possibility of missed data input.
Business Area Business Area is optional and is equivalent to a specific area of responsibility within your company or business segment. BA (Business Area) also allows for internal and external reporting.
Another configuration requirement for set-up in SAP are the Basic settings consisting of the following:
Chart of Accounts(COA)
Fiscal Year Variants.
Currencies
The COA(Chart of Accounts)
The COA(Chart of Accounts) lists all General Ledger accounts that are used by the organization. It is assigned in configuration to each company code and allows for daily General Ledger postings.
Fiscal Year configuration
Fiscal Year configuration is a must and can be defined to meet your companyu2019s reporting periods whether Fiscal (any period combination that is not calendar) or Calendar( Jan-Dec).
Posting Periods are defined and assigned to the Fiscal Year.
Within the periods you specify start dates and finished dates.
SAP allows for 12 posting periods along with specially defined periods that can be used for year-end financial closing.
Rohit Agrawal

Batch Management - Changing Material level to Plant level

Hi friends,
We are configuring batch management for ECC 6.0 with CRM 5 .
I can see the batch level in my system as Material level. But we would like to convert batch level in to Plant level. when i try to convert the batch level i am getting error "This type of conversion is not implemented".
There is no batch record exists in the stock.
Please clarify why can't able to change to plant level from material level.
Thanks

YOu need to use the OSS note 41715
This will explain what exactly you need to do.
Please go through the above OSS note.

How many min. can i record with voice record with MuVo V200 1

Hi,
I'm going to buy the Creative MuVo V200 GB.
Now my questions about this player.
How many minutes can i record over voice recording.
Maybe someone can tell me how much Megabytes minute of recording will take.
Are there different quality levels of recording?
In which format does the player save the recordings?
I will use the player to record lectures at the uni'versity.
Did anyone have done this?

Manage ODS : Difference of Transferred Records and Added Records

Hi there,
When I click on Manage ODS , I have the following fields
Transferred Records and Added Records.
Please advice the difference

Hi,
Transferred Record coloumn indicated how many records were tranferred from the source system to BW,means how many records were extracted at that point of time and another Column indicates that the total number of records added to your data target.these two cloumn vales may not be same for all the time,becoz if you have filters at the update rule level....in this case numbers records tranfered and numbers records added might be different.......
Transferred refers to the number of records that are transferred from the datasource (arrive in BW). Added is the number records inserted into the ODS. Both can be different numbers, like due to any processing of the data.
Added records refer to which is really inserted in ODS (your start routine, for example, can reduce the number of transferred records by deleting something!)
Ex
transferred records means the total records from source e.g ods. say data coming from ods
docnumber docitem customer qty
001 1 x 10
001 2 y 20
002 1 x 30 (3 records)
and your infocube has char customer and keyfigure qty, so
record added
customer qty
x 40
y 20 (2 records)
so here you have transferred records = 3 and added records = 2
Refer these posts:
Re: transferred records and added records
Re: Transfered and Added Records
Re: Clarification about ODS - Transferred & Added records
-Shreya

Psa level 91 records ,dtp level 0 records

Similar Messages

Maybe you are looking for