Debugging CFMAIL attribute / bad address errors
We sent out email blasts by querying the database for a list of addresses and have been getting two errors which seems to kill off the loop we use to call CFMAIL:
"Error","mailWorker-5","11/01/12","10:15:29",,"javax.mail.SendFailedException: Invalid Addresses; nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 501 5.5.4 Invalid Address "
and
"Error","ajp-bio-8012-exec-251","10/29/12","10:16:31",,"Attribute validation error for tag CFMAIL."
I suspect that both are related to some type of malformed email addresses, but how would i determine which email address? is there a way to determine which attribute caused an error?
ggantzer2 wrote:
... have been getting two errors which seems to kill off the loop we use to call CFMAIL
It's a shame if one error should kill off the loop. Imagine the error occurring after just 3 sent mails out of a 5000-message job! If throughput is important, then you might want to redesign as follows:
<cfloop query>
<cftry>
<cfmail>
</cfmail>
<cfcatch type="any">
<!--- handle errors, for example, log e-mail address and error message --->
</cfcatch>
</cftry>
</cfloop>
Similar Messages
-
I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.
-
In the past three days, whenever I send a message, it does not go through. Instead, I get the message: 5.1.0 - Unknown address error 501- "5.1.8 Bad sender's system address". I tried downloading the newest version of Thunderbird but it did not work. I do not receive this message when using other software.
I had the look that you suggested. As far as I can tell there are no problems with the user name. Maybe I should check with my email company, Cogeco?
-
So, I've created an iBook. Closed it. Opened it a few hours later to edit some more. Tried to save it, responding in the error:
"The document 'xxx' couldn't be saved. Bad address."
Now what?Have a look at metalink Note:395350.1
Basically, this document describes it's a problem in DIO (direct IO), which can be tuned using vxtunefs (per filesystem).
The document describes to enlarge the buffer bigger than the described number (which is 1MB)
dynamically: vxtunefs -o discovered_direct_iosz=1572864 /mount/point (replace /mount/point with the oracle mount point(s))
statically in /etc/vx/tunefstab: /dev/vx/dsk/oracle/oravol discovered_direct_iosz=1048577 (replace with your oracle filesystems) -
674 ERROR: Message operation failed because of a bad address
On our tuxedo server we have the following error that is repeatedly writen on its log:
155140.RJODIGD02!sid_server_ro.778390.1.0: ERROR: msgrcv err(LIBTUX_CAT:674: ERROR: Message operation failed because of a bad address): errno=14,qid=27729940,buf=3299838207512,bytes=1049340,type=-1073741824,flag=0
This error does not affect the Server functionality but we would like to know by what could be due:
we have seen the error description but from this we could not find out the real causes:
674 ERROR: Message operation failed because of a bad address
DESCRIPTION
msgsnd to a queue failed because the message pointer is pointing to an illegal address.
ACTION
Check the address of the message queue pointer, or contact your TUXEDO System Technical Support.
Any help is well accepted ......... thanks a lot in advance.
CiaoHi,
If I had to guess, I'd say you were looking at a memory corruption problem. The error basically says that when Tuxedo tried to perform a msgrcv() operation on a System V IPC queue, the address of the buffer to receive the message wasn't valid. Although if this is really a memory corruption problem, I'm surprised your server continues to function. You might want to try a memory checking tool to see if your code is writing to memory it doesn't have allocated or writing past the ends of an allocated buffer.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Asysnc IO Error: 14: Bad address
Hello,
We are using RHEL4.0 x84_64 Linux system. Oracle 10.2.0.3 database runs on it. We try to run our database as async IO.
We are using veritas vxfs file system type.
After set the oracle parameter filesystemio_option to setall, we got an error from db also from OS.
Database error message belov;
ORA-19502: write error on file "/home/db/log01/1_42895_629465220.dbf", blockno 131073 (blocksize=512)
ORA-27061: waiting for async I/Os failed
Linux-x86_64 Error: 14: Bad address
Additional information: -1
Additional information: 1048576
ORA-19502: write error on file "/home/db/log01/1_42895_629465220.dbf", blockno 131073 (blocksize=512)
ARC1: I/O error 19502 archiving log 6 to '/home/db/log01/1_42895_629465220.dbf'
ARCH: Archival stopped, error occurred. Will continue retrying
Sun Oct 26 08:55:50 2008
dmesg error message;
Vendor: EMC Model: SYMMETRIX Rev: 5772
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
SCSI device sdc: drive cache: write through
sdc: unknown partition table
Attached scsi disk sdc at scsi0, channel 0, id 1, lun 147
Attached scsi generic sg2 at scsi0, channel 0, id 1, lun 147, type 0
Vendor: EMC Model: SYMMETRIX Rev: 5772
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdd: 238540800 512-byte hdwr sectors (122133 MB)
SCSI device sdd: drive cache: write through
SCSI device sdd: 238540800 512-byte hdwr sectors (122133 MB)
SCSI device sdd: drive cache: write through
sdd: unknown partition table
Attached scsi disk sdd at scsi0, channel 0, id 1, lun 149
Attached scsi generic sg3 at scsi0, channel 0, id 1, lun 149, type 0
Vendor: EMC Model: SYMMETRIX Rev: 5568
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sde: 15360 512-byte hdwr sectors (8 MB)
SCSI device sde: drive cache: write through
SCSI device sde: 15360 512-byte hdwr sectors (8 MB)
SCSI device sde: drive cache: write through
sde: unknown partition table
Attached scsi disk sde at scsi0, channel 0, id 2, lun 0
Attached scsi generic sg4 at scsi0, channel 0, id 2, lun 0, type 0
lpfc 0000:12:02.0: 0:0203 Nodev timeout on NPort x144d00 Data: x822 x1 x0
VxDMP5: unknown partition table
VxDMP6: unknown partition table
VxDMP1: p1 p2 p3 p4 < p5 >
VxDMP1: p1 p2 p3 p4 < p5 >
VxDMP1: p1 p2 p3 p4 < p5 >
VxDMP1: p1 p2 p3 p4 < p5 >
SCSI device sdc: 238540800 512-byte hdwr sectors (122133 MB)
SCSI device sdc: drive cache: write through
sdc: sdc3 sdc8
VxDMP6: p3 p8
VxDMP1: p1 p2 p3 p4 < p5 >
VxDMP1: p1 p2 p3 p4 < p5 >
Can you help me ?Have a look at metalink Note:395350.1
Basically, this document describes it's a problem in DIO (direct IO), which can be tuned using vxtunefs (per filesystem).
The document describes to enlarge the buffer bigger than the described number (which is 1MB)
dynamically: vxtunefs -o discovered_direct_iosz=1572864 /mount/point (replace /mount/point with the oracle mount point(s))
statically in /etc/vx/tunefstab: /dev/vx/dsk/oracle/oravol discovered_direct_iosz=1048577 (replace with your oracle filesystems) -
Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.
Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRiHi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Application Express 3.1.1.00.09
We have some users who are experiencing what appears to be a browser problem in one of our APEX applications.
When clicking on any button that does an insert or update to the database some users get an HTTP-400 Bad Request error message. The database does not get updated and anything they click on after that shows that message. In most cases we have been able to restore the user’s browser to the default settings and the issue is resolved. However, we were not able to isolate which browser setting is causing the issue. We have seen the issue in IE 6, IE 7 and IE 8.
Here’s the error we see in the Apache server error log (minus the date time stamp and IP addresses):
mod_plsql: /pls/ax_tastest/wwv_flow.accept HTTP-400 Invalid name
Does anyone else have a solution for this? Know what's causing it?HTTP 400 Bad Request Error from APEX 3.1.1.00.09.
We were able to determine that only PCs which had the Google toolbar installed were getting the HTTP 400 Bad Request Error from a particular page in one of our applications. Further testing revealed that turning off the ‘auto-fill’ feature of the Google toolbar would prevent the error from occurring and the application would behave normally. We were able to identify a specific item on the page that was the root cause. The item was using the type “Text area with HTML Editor” which has been deprecated. We changed the page item type to “HTML editor standard” and this has resolved the issue with or without the Google Toolbar and auto-fill feature enabled.
Summary:
• Browser setting: Google toolbar enabled with auto-fill enabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, that executes a page process, it results in HTTP 400 error.
• Browser setting: Google toolbar enabled with auto-fill disabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, everything goes through correctly and there is no error.
• Browser setting: Google toolbar enabled with auto-fill disabled or enabled.
Apex page item of type: ‘HTML Editor Standard’.
When a user clicks on a button in the page, everything goes through correctly and there is no error. -
BAD parse error: zero-length content
Hi there!
Unfortunately I have a problem with JavaMail which I can not reproduce. Therefore, I don't have any 'debug' output of JavaMail. But maybe some of you have a clue for me. :)
This is the error stack (just a snippet) which I get from JavaMail:
javax.mail.MessagingException: A244 BAD parse error: zero-length content;
nested exception is:
com.sun.mail.iap.BadCommandException: A244 BAD parse error: zero-length content
at com.sun.mail.imap.IMAPFolder.getMessagesByUID(IMAPFolder.java:1938)
at org.zimbra.exchange.service.source.ExtendedEmailSyncSource.getMessagesByUID(ExtendedEmailSyncSource.java:1751)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.mail.iap.BadCommandException: A244 BAD parse error: zero-length content
at com.sun.mail.iap.Protocol.handleResult(Protocol.java:343)
at com.sun.mail.imap.protocol.IMAPProtocol.fetchSequenceNumbers(IMAPProtocol.java:1284)
at com.sun.mail.imap.IMAPFolder.getMessagesByUID(IMAPFolder.java:1920)
... 13 moreAnd this is my getMessagesByUID method:
private Message[] getMessagesByUID(long[] uids, IMAPFolder f)
throws StoreClosedException {
Message[] result = new Message[0];
try {
result = f.getMessagesByUID(uids);
} catch (StoreClosedException e) {
throw e;
} catch (MessagingException e) {
log.trace("The messages could not be fetched from the server.", e);
} catch (Exception e) {
log.error("An unexpected error occurd. "
+ e.getClass().getSimpleName(), e);
return (result);
}My problem is that I can not reproduce the error and so I don't know why the error is thrown. According to the JavaDoc it should return a 'null' entry for messages where it can not find the UID.
thanks for your help.The error message is coming from your IMAP server. It seems to be complaining about the
message that JavaMail sent it. The getMessagesByUID method will send an IMAP FETCH
command. That command doesn't include any variable length content, so I don't know what
exactly the server could be complaining about.
Perhaps your server has a log file that might have more information?
Otherwise, you'll probably need to capture the debug output so that you can examine it later
the next time this problem occurs. -
Hi,
I need to some help on creting WebService Proxies for Amazon WebService.
I just created a proxy for Amazon web service.When i run it... I am getting Bad Response Error
Details Below
Code Snippet
public class AmazonSearchPortClient {
private String awsAccessKeyId = null;
// private String associateTag = null;
private demo2.proxy.AmazonSearchPort _port;
public AmazonSearchPortClient(String awsAccessKeyId) throws Exception {
ServiceFactory factory = ServiceFactory.newInstance();
this.awsAccessKeyId=awsAccessKeyId;
_port = ((demo2.proxy.AmazonSearchService)factory.loadService(demo2.proxy.AmazonSearchService.class)).getAmazonSearchPort();
* @param args
public static void main(String[] args) {
try {
demo2.proxy.AmazonSearchPortClient myPort = new demo2.proxy.AmazonSearchPortClient("MYKEY");
System.out.println("calling " + myPort.getEndpoint());
KeywordRequest kwr = new KeywordRequest();
kwr.setType("Java");
//kwr.setA
ProductInfo pinfo = myPort.keywordSearchRequest(kwr);
pinfo.getDetails();
/*KeywordRequest("Hello","1","books","D3HW0PG66IPLAM",
"heavy","D3HW0PG66IPLAM","");*/
// Add your own code here
} catch (Exception ex) {
ex.printStackTrace();
* delegate all operations to the underlying implementation class.
public ProductInfo keywordSearchRequest(KeywordRequest keywordSearchRequest) throws java.rmi.RemoteException {
return _port.keywordSearchRequest(keywordSearchRequest);
When i run the code.. i got the below exception....
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 410 Gone
at amazonwebclientprj.proxy.runtime.AmazonSearchBinding_Stub.keywordSearchRequest(AmazonSearchBinding_Stub.java:560)
at amazonwebclientprj.proxy.AmazonSearchPortClient.keywordSearchRequest(AmazonSearchPortClient.java:48)
at amazonwebclientprj.proxy.AmazonSearchPortClient.main(AmazonSearchPortClient.java:35)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 410 Gone
at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:172)
at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:148)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:175)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at amazonwebclientprj.proxy.runtime.AmazonSearchBinding_Stub.keywordSearchRequest(AmazonSearchBinding_Stub.java:543)You're getting HTTP 410:
The requested resource is no longer available at the server and no forwarding address is known. This condition is expected to be considered permanent. Clients with link editing capabilities SHOULD delete references to the Request-URI after user approval. If the server does not know, or has no facility to determine, whether or not the condition is permanent, the status code 404 (Not Found) SHOULD be used instead. This response is cacheable unless indicated otherwise.
The 410 response is primarily intended to assist the task of web maintenance by notifying the recipient that the resource is intentionally unavailable and that the server owners desire that remote links to that resource be removed. Such an event is common for limited-time, promotional services and for resources belonging to individuals no longer working at the server's site. It is not necessary to mark all permanently unavailable resources as "gone" or to keep the mark for any length of time -- that is left to the discretion of the server owner.
Looks like the URL in your proxy is not right.
John -
ORA-20002: 501 Bad syntax error
Hi,
I intend to send a simple smtp mail using the builtin UTL_SMTP package.
But i get the following error:-
ORA-20002: 501 Bad syntax error
Here is my code:-
CREATE OR REPLACE PROCEDURE mail
IS
BEGIN
DECLARE
v_connection UTL_SMTP.CONNECTION;
BEGIN v_connection := UTL_SMTP.OPEN_CONNECTION(<my host here>,25);
dbms_output.put_line('Connection Opened');
UTL_SMTP.HELO(v_connection,<my host here>);
dbms_output.put_line('After calling helo');
UTL_SMTP.MAIL(v_connection,'[email protected]');
dbms_output.put_line('Sender set');
UTL_SMTP.RCPT(v_connection,'[email protected]');
dbms_output.put_line('Recipient Set');
UTL_SMTP.DATA(v_connection,'Sent From PL/SQL');
dbms_output.put_line('Message body set');
UTL_SMTP.QUIT(v_connection);
dbms_output.put_line('Connection Closed');
end;
END;
Here is the output:-
SQL> exec mail
Connection Opened
After calling helo
BEGIN mail; END;
ERROR at line 1:
ORA-20002: 501 Bad address syntax
ORA-06512: at "SYS.UTL_SMTP", line 86
ORA-06512: at "SYS.UTL_SMTP", line 204
ORA-06512: at "ADMIN.MAIL", line 13
ORA-06512: at line 1
I tried sending mails to my smtp server via java mailing API and i am
successful. So i am wondering wat i am doing wrong up there in Oracle.
I have JServer enabled, i also ran the initplsj.sql successfully.
Please help.
Regards,
Leo.Hi APC,
Yep HELO returns 250. Here is the code i use followed by the output. I use valid e-mail addresses(changed them here cz they belong to real ppl :) ). Again, i am able to send mails via java mailing API's, to the same recipietn from same sender via same smtp server.
Code :------
CREATE OR REPLACE PROCEDURE mail
IS
v_connection UTL_SMTP.CONNECTION;
value UTL_SMTP.reply;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
UTL_SMTP.write_data(v_connection, name || ': ' || header || utl_tcp.CRLF);
END;
BEGIN
v_connection := UTL_SMTP.OPEN_CONNECTION('smtp.server',25);
dbms_output.put_line('Connection Opened');
dbms_output.put_line('before calling helo');
value := UTL_SMTP.HELO(v_connection,'smtp.server');
dbms_output.put_line('after calling helo');
dbms_output.put_line('code ' || value.code);
dbms_output.put_line('before Sender is set');
value := UTL_SMTP.MAIL(v_connection,'[email protected]');
dbms_output.put_line('code ' || value.code);
dbms_output.put_line('text ' || value.text);
UTL_SMTP.RCPT(v_connection,'[email protected]');
dbms_output.put_line('Recipient Set');
UTL_SMTP.open_data(v_connection);
send_header('From','"Sender" <[email protected]>');
send_header('To','"Recipient" <[email protected]>');
send_header('Subject','Hello');
UTL_SMTP.write_data(v_connection, UTL_TCP.CRLF || 'Hello, world!');
UTL_SMTP.close_data(v_connection);
dbms_output.put_line('Message body set');
UTL_SMTP.QUIT(v_connection);
dbms_output.put_line('Connection Closed');
END;
Output:--------
Connection Opened
before calling helo
after calling helo
code 250
before Sender is set
code 501
text Bad address syntax
Looking forward to hearing from youself. :)
Reagrds,
Leo. -
How to debug virtual attribute
Hi experts,
I would like know if it's possible to debug a virtual attribute used during replication between CRM - ISU ?
A external break point or a session break point doesn't work.
The only way to do it is :
Modify the abap source code of the virtual attribute in order to make an error.
Then, we correct the source code
Finally, we can restart the process by transaction ECRMREPL (ISU) and enter in debug mode.
Do you another solution for debug virtual attribute who's faster ?
Many thanks.
Mathieu.Hi Mathieu,
If you want to debug the virtual attribute in ISU you first can Deregister the inbound que with transaction SMQS...You should deregister your correct destination...
Then make the necessary changes to the Object IE CRM contract in CRM, this will create the outbound BDOC to ISU, after this then go back to transaction SMQS in ISU, check the QRFC monitor, Your object you changed should appear in the que...Double click the object and the que name you should get to FM -> BAPI_CRM_SAVE...
There is a debug icon in the upper screen u can debug from there, before u do so make sure u placed a break point in either FM -> ISU_PRODUCT_IMPLEMENT which will in turn call your Virtual attribute FM that u have attached in the MDG...
Hope that helps...
regards
Mish -
Itunes.exe bad image error
I have been trying to get iTunes up and running for months now with no luck what so ever. I'm running on Windows Vista Service Pack 2.
On opening iTunes I get the error message
'iTunes.exe - Bad Image
C:\WINDOWS\system32\softpub.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." '
After clicking Ok a window appears saying itunes has stopped working and that its trying to find a solution. only button is 'close program'. After closing the program a message appears in the bottom right of the screen saying DEP (Data Execution Protection) has closed itunes to protect my computer.
As well as this problem I have been unable to perform a windows update. It has been giving various error codes which I tried to fix using the windows Fixit programs and other fixes but both problems persisted.
I looked thorugh a lot of discussions on different forums online and have tried various things but to no avail. At first I uninstalled iTunes and reinstalled it (I have now done this around twenty times after trying different fixes) and it downloaded and installed perfectly every time but whenever I tried opeing it I would get the bad image error message.
I have also tried running system file checker (sfc scan) by running command prompt as administrator and it says
'Beggining system scan. This may take some time.
There is a system repair pending which requires a reboot to complete. restart windows and run sfc again.'
But when I restart windows and run sfc again it gives exaclty the same message. I repeated this on numerous occasions after trying other fixes but always gave the same message.
I also read that replacing the softpub.dll file in the system32 file could be a fix, so I downloaded a new file but when I tried to either rename the old one, move it or do a move and replce with the new file I was told that I couldn't because it needed the administrators permission. I am the only user and was logged in with administrators rights so don't know why it asked and when I tried to give permission it says
' Destination Folder Acces Denied
You need permission to perform this action.'
It gives the option to retry but this just produces the same message.
Any help would be massively appreciated.Did a restart and there are a few errors and warning listed below,
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
warning 7 - Kernel-Processer-Power
The speed of processor 1 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
warning 7 - Kernel-Processer-Power
The speed of processor 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
error 7000 - Service Control Manager Event Log Provider
The Parallel port driver service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
warning 7044 - Service Control Manager Event Log Provider
The following service is taking more than 4 minutes to start and may have stopped responding: Avira Real-Time Protection
Contact your system administrator or service vendor for approximate startup times for this service.
If you think this service might be slowing system response or logon time, talk to your system administrator about whether the service should be disabled until the problem is identified.
You may have to restart the computer in safe mode before you can disable the service.
warning 3004 - windows defender
Windows Defender Real-Time Protection agent has detected changes. Microsoft recommends you analyze the software that made these changes for potential risks. You can use information about how these programs operate to choose whether to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow.
For more information please see the following:
Not Applicable
Scan ID: {C9F59478-26AB-4B82-BE2B-2386B5269205}
User: BILL\Cust
Name: Unknown
ID:
Severity ID:
Category ID:
Path Found: driver:RapportIaso;file:c:\programdata\trusteer\rapport\store\exts\rapportms\ba seline\rapportiaso.sys
Alert Type: Unclassified software
Detection Type:
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
From checking the times I saw the message appear just before the last two error messsages.
I have also recently run some malware software which has quarentined about 20 files and since then the speed has been getting slower and slower to the point that the last restart took 20 mins -
hi all,
To send data from my dummy driver to user
i used mp->b_cont->b_wptr = "hello to user"
mp->datap->db_cmd=IOCACK,
qreply(q,mp);
but the application ioctl is failing with
bad address why?
Although i gave enough buffer space
to strioctl.ic_dp buffer i.e malloc(50)
even though the data i sent is just 15 characters.
can anybody answer me..
if so thanks in advance
regards
vasui tried using rptr but no use..
here the code is in application side
char *buf
buf = (char*) malloc(70)
buf="hello world"
strioctl.ic_timeout=30
strioctl.ic_dp=buf
strioctl.ic_len=strlen(buf)
ioctl(fd,I_STR,&strioctl)
driver code
mp->b_cont->w_ptr++="Good bye world"
error coming is "bad address" why?
if any one has example for sending data from driver
to user application using I_STR ioctl please welcome.
thanks for all who r ready to help me
regards
vasu -
Server to server "bad-instance" error while registerHook
Hi LCCS Team,
I have tried server to server integration last day and got successful in setting up amf server and required endpoints for lccs.
while i was trying to register hook i got this error
com.adobe.rtc.util.RTCError: bad-instance at com.adobe.rtc.account.AccountManager.checkStatus(AccountManager.java:907) at com.adobe.rtc.account.AccountManager.subscribeCollection(AccountManager.java:470) at com.adobe.rtc.account.AccountManager.subscribeCollection(AccountManager.java:453)
i really have no idea where i went wrong.
this is the code i invoced
AccountManager am = new AccountManager("https://connectnow.acrobat.com/xxxxxxx/");
am.login("[email protected]", "xxxxxx");
am.unregisterHook();
am.registerHook("<a real URL>", "12345"); //getting error at this point
am.subscribeCollection("myAtulMeeting","JaiHOCollection");
i have dig in to lccs.jar source in com.adobe.rtc.account.AccountManager.checkStatus(AccountManager.java:907)
but i am unable to find the cause, please suggest some pointers.
Thanks
AtulHi Raff,
Thanks for the reply.
i have checked with the room URL, and yes i terminated it with / , i corrected it.
In debug mode i got to know that registerHook is working fine, but the subscribeCollection is having issues.
am.subscribeCollection("myAtulMeeting","JaiHOCollection");
while in debug mode i found that error happens when checkstatus call is made in subscribeCollection method,
in AccountManager class
inside checkStatus method
Element status = (Element) result.getElementsByTagName("status").item(0);
String code = status.getAttribute("code"); //code gets the "error" as string
Any thing else i am missing ?
Thank You
Atul
Maybe you are looking for
-
Flash accessing the Dial Up connection
I'm new to the forums, so hello to everybody. I've got a project on my hands, an interactive kiosk. I've created the interface in Flash, but I have some issues I can't get past. First of all, I want to create an emergency call feature, where the user
-
How get Mailbox Folder Item Count for date range?
How to make query to Exchange 2013 like this: query ItemCount (specified Mailbox, specified Folder (with subfolders), specified Date Range)? I find this script for Exchange 2010: http://gsexdev.blogspot.ru/2012/10/item-age-sample-one-reporting-on-ite
-
Can I force A side of audio track on multiclip?
This should be a no brainer, but I can't figure it out... I am editing a feature on FCP. They shot a lot of A and B camera simo stuff. But they were only feeding the audio into the A camera. I made a multiclip, but I ALWAYS want the audio to be comin
-
Photos look different in Light room vs. PS2 or any other photo software
Using LR2,PS2 and ACDSee8.0 on windows xp pro. I have no trouble exporting or importing photos to LR. My problem is the photos have a different tone or color in light room. When I make changes and export to say photoshop, its as if no changes were tr
-
Stuck at Generating Thumbnails
Almost every time I import from my cameras it gets stuck on Generating Thumbnails. It will first say Time Remaining: 2 minutes, and then it will say 2 hours or more and just spin. I have to Force Quit. This time I can't get past this? What should I t