Debugging Oracle JVM with Eclipse

I installed Oracle10g personal edition on a Windows machine, and developed some Java stored procedures for it. It works nicely. However, I cannot figure out how and where to configure Oracle's JVM so that it would let me connect to it from Eclipse. Any idea?
Thanks,
Saar

Colleagues from JDeveloper can help you out.
JDeveloper and ADF

Similar Messages

Installing Oracle Workshop with Eclipse 3.5

I've installed WebLogic Platform 10.3 locally and have a previous installation of Eclipse 3.5 that I would like to use as the basis for Workshop. However, when attempting use the "Use Existing Eclipse" option, I get the following error:
The specified Eclipse home is not valid. It must have Eclipse 3.3.2 with WTP 2.0.3 installed. It must have org.eclipse.platform_3.3.3 features installed.
I've downloaded and installed the 2.0.3 WTP plugin and features, though the message installation message doesn't appear to acknowledge that.
Is there any way around this?

Is there any way around this?No. Workshop is not compatible with anything besides Eclipse 3.3.2. If you'd like to use a newer version of Eclipse, you can try OEPE:
http://www.oracle.com/technology/products/enterprise-pack-for-eclipse/index.html
- Konstantin

Setting max heap in Oracle JVM

Hello -
I'm having a problem with a Java stored procedure running out of heap memory in Oracle 10g running Java 1.4.
Normally (running Java in a standard context) I would just modify the -Xmx with a higher value, but for the life of me I can't figure out how to do it in a stored procedure context.
I have browsed Google and I have browsed the Oracle JVM installation stuff, all to no avail.
Can anyone help me with how to set my max heap size, or verify that it's impossible? I have taken all of the standard Oracle memory parameters (JAVA_POOL, UGA/PGA/SGA limits) out of the picture by jacking them up and keeping an eye on memory values up to the point that the procedure fails (at ~700m), so I'm pretty sure that this is my problem.
So far I have looked at:
Config files
Config tables
DB parameters
I haven't been able to find anything remotely related to JVM option configuration in any of the above.
It is worth noting that I ran across another forum where someone was wanting to set their minimum heap size, and they were told that it was not possible. I'm just having trouble believing that it's the same story with something as critical as max heap size.
Much obliged for any help.
Thanks,
Annaka

From Metalink Note 466112.1:
Applies to:
Oracle Server - Enterprise Edition - Version: 9.2.0.1 to 10.2.0.3
This problem can occur on any platform.
Symptoms
When attempting to execute a java class that works fine in a stand alone JVM, fails with Oracle JVM with the following error:
ERROR
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.OutOfMemoryError
ORA-06512: at "IDS_SYS.POD", line 3
Cause
The MaxMemorySize was set 256M (the default values) where the JSO needs memory more than 256 MB to run.
This can be checked as following:
SQL> create or replace function getMaxMemorySize return number
2 is language java name
3 'oracle.aurora.vm.OracleRuntime.getMaxMemorySize() returns long';
4 /
Function created.
SQL> select getMaxMemorySize from dual;
GETMAXMEMORYSIZE
268435456
After increasing the MaxMemorySize to a larger value(1 GB), the problem was fixed
Solution
Please increase the MaxMemorySize to a larger values(i.e. 1GB), this can be done as following:
SQL> create or replace function setMaxMemorySize(num number) return number
2 is language java name
3 'oracle.aurora.vm.OracleRuntime.setMaxMemorySize(long) returns long';
4 /
Function created.
SQL> select setMaxMemorySize(1024*1024*1024) from dual;
SETMAXMEMORYSIZE(1024*1024*1024)
Then you can check if the value is set correctly using the following:
SQL> select getMaxMemorySize from dual;
GETMAXMEMORYSIZE
1073741824
In my case I had to set the parameter within a job's the session.
bye
TPD
Edited by: TPD on Sep 23, 2008 4:27 PM - tags added

How to download Oracle JVM?

Hi,
Could somebody please send me a link for downloading Oracle JVM?
I have setup Oracle Database Express Edition on my machine, but its missing the JVM. Could you point me to the documentation on setting up Oracle JVM with Oracle DB XE?
Thanks,
Prashant.

Hi
It's not possible to download and separately install OracleJVM.
As you can read in the following document OracleJVM is not available in XE.
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
HTH
Chris

Advantages of using Oracle JVM over JPDA for Remote Debugging?

What are the "additional features" that the documentation hints at when using the Oracle JVM for remote debugging vs. the JPDA protocoL? Can a member of the JDEV briefly address this? What exactly am I losing when using JPDA?

I am not getting anywhere with 'NCOMPing' the stuff. Attempts to NCOMP keeps erroring out . The first of the errors is
'Error while determining classes contained in jsch-1.29_minimalClassListAndTCD
mper.java
Exception oracle.aurora.sqljdecl.ParseException: Encountered "-" at line 14
column 18.
Was expecting one of:
"extends" ...
"implements" ...
The following operations failed
jsch-0.1.29_minimalClassListAndTCDumper.java: creation
exiting : Failures occurred during processing
Kuassi, I have looked at a few of your posts where you make mention of a file titled 'Settings_os.properties'. I see no such file in my Oracle installation. What am I missing here ?

Configuring Oracle EAServer 10g 10.1.2.0.2 with Eclipse

Hi ,
Am working on a JAVA/J2EE/Struts application using Eclipse 3.1 and am using
Oracle Enterprise Manager 10g Application Server 10.1.2.0.2 for deploying the application. Currently am building my application to an ear file and then deploying it manually on the Application Server control to run it every time. Becouse of this am not able to debug the application through eclipse. I need to know whether we can configure Oracle Enterprise Manager 10g 10.1.2.0.2 Enterprise Application Server with Eclipse 3.1 just as we are doing with eclipse tomcat or eclipseweblogic so that i can directly run or debug the application from Eclipse instead of creating a an ear and deploying it to the server to run it. Am using Oracle application server for the first time.
I tried searching but couldnt find any relevant document /info on this. I got some info on configuring Oracle 10g Application Server 10.1.3 with eclipse,but none about 10.1.2.0.2.
Any help regarding this is appreciated
Thanks in advance
grate

Hi Steve,
Thanks for your reply. Am new to Oracle application server. The version that i mentioned ie. 10.1.2 was already installed in my laptop when i got it for working. Am configuring the deployment and JNDI services after i start the sever and bring up the server control through IE after entering the username and password. So i couldnt understand the relevance of a standalone server at this point, and i am new to the name OC4J , why is it called so?(am sorry if am asking any stupid question, but to be frank i dont know any thing about oracle application server untill i came across it recently ) . The document that you followed is the same one that me too found while searching in net. But i couldnt follow the steps becouse in eclispe when i tried to configure the server runtime its throwed error saying it couldnt find any folder in the 10.1.2 installion directory named "...../home/j2ee" . But there was a folder called J2ee in my oracle installion folder so i just tried to map it, but it again throwed error saying "couldnt find asm.jar in j2ee/lib " . So am stuck up at this point.Should i go for oracle 10.1.3 or OC4J as you mentioned? Please give me some insights regarding this.
Regards
Grate

Debugging with Eclipse Plugin using Weblogic 6.1

I am having a problem debugging using Eclipse 2.1 and the weblogic server plugin
provided by this site.
If I start the server and run the application everything works fine.
If I put a breakpoint into my code and then run the application I do not see the
application breaking at all. I am in debug view of Eclipse. The browser just
hangs and will not respond. I can take the breakpoint off and refresh the browser
and it works fine again.
Do I need to have anything special in a configuration file for weblogic to enable
debugging ?
Do I need to start the JVM with any special parms. I am currently using the following
startup options. I have tried a number of configurations on the startup options
and nothing works.
-hotspon
-ms64m
-mx256m
-Xdebug
-Djava.compiler=none
-Xnoagent
-Dweblogic.ProductionModeEnabled=false
I am using Weblogic 6.1 and JDK 1.3.1_09
Thanks in advance for any help...

Mark,
Please post this in the weblogic.developer.interest.general newsgroup
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Mark Hartnett" <[email protected]> wrote in message
news:3f57a4a3$[email protected]..
>
I am having a problem debugging using Eclipse 2.1 and the weblogic serverplugin
provided by this site.
If I start the server and run the application everything works fine.
If I put a breakpoint into my code and then run the application I do notsee the
application breaking at all. I am in debug view of Eclipse. The browserjust
hangs and will not respond. I can take the breakpoint off and refresh thebrowser
and it works fine again.
Do I need to have anything special in a configuration file for weblogic toenable
debugging ?
Do I need to start the JVM with any special parms. I am currently usingthe following
startup options. I have tried a number of configurations on the startupoptions
and nothing works.
-hotspon
-ms64m
-mx256m
-Xdebug
-Djava.compiler=none
-Xnoagent
-Dweblogic.ProductionModeEnabled=false
I am using Weblogic 6.1 and JDK 1.3.1_09
Thanks in advance for any help...

Oracle JVM 6u21 and Eclipse

If you have been experiencing Eclipse crashes since updating to Sun/Oracle JVM 6u21 (aka 1.6.0_21), head over to the following blog post to read about a workaround...
http://lt-rider.blogspot.com/2010/07/oracle-jvm-6u21-and-eclipse.html
- Konstantin

Oracle has produced another build of 6u21 JVM that reverts the change that adversely affected Eclipse. If you have reverted back to an older JVM, you can safely move forward to 6u21. The build 1.6.0_21-b07 is safe to use. The version that Eclipse has trouble with is b06. You can check which version you have by running "java -version".
- Konstantin

Is it possible to enable Java in oracle 10g express with the oracle jvm?

I've oracle 10g express installed. I would like to create java stored procedures in a schema. But, how do I have the database java-enabled?

It might be possible.
Realize, however, that the Oracle JVM is a component of the Standard Edition One and higher - so to be able to use it you need to license Standard Edition One or higher.
If you are going to violate the license anyway, why not stick with an Edition that contains the JVM.

Debugging JSP with Eclipse

Hi, how to connect to Oracle Database 9i R2 with Eclipse?

Hi, I didn't get an email notifying me of a response to this. Just happened to check myself.
          But basically you want to point the weblogic server directly to your workspace (src code) so it can detect a change. THis is from our doc below. You may also write an ant script specific to weblogic that redeploys the app and reloads the xml and prop files without restarting the server.
          1.     Start up your Weblogic domain server (i.e., C:\Domains\devDomain\startWebLogic.cmd).
          2.     Go to url, http://localhost:7001/console and log in (weblogic, weblogic).
          3.     On the left menu, click Deployments, then Lock & Edit button above it, and then the Install button in the main panel.
          4.     Change the location to the web folder in your project workspace (C:\Eclipse\workspace\<projectname>\web) Click Next.
          5.     Leave checked the Install this deployment as an application and click Next.
          6.     Put name for Name of deployment. . From here you can click Finish.
          7.     Click Activate Changes. Then check the deployment box and click Start button and Servicing all requests (in Deployments panel). Then click Yes to start it on the next page
          8.     Enter the URL of the application. This example is
          http://localhost:7001/web/index.htm
          The ?web? was the name of the web folder we deployed from. In the future you could name this something different if deploying from this console so the url?s do not conflict.
          Edited by mwooten77 at 01/18/2007 9:34 AM
          Edited by mwooten77 at 01/18/2007 9:35 AM

Debug an oracle function with toad 7.4, oracle 9i

Hello,
i wanna debug an oracle function with toad 7.4
so i wanna give param to this function and fix breakpoint and verfy some variables values ... etc
could you show me how debug it?
Thanks
Regards
Elyes

Do you have the Toad Debugger? Thats the extra cost option which you get for free in OracleSqlDeveloper.
If you have the ToadDebugger, Read the Manual
If not , download OracleSqlDeveloper and use it. It's free, and written by Oracle.

OC4J debug with Eclipse

I been trying to debug a oc4j application with eclipse but so far I can only see variables like
' this IndexAction,
arg0 ActionMapping,
arg1 null,
arg2 EvermindHttpServletRequest,
arg3 EvermindHttpServletResponse' ,
I did setup Ant compile to create an *.ear in debug.
classpath="${libclasspath};${build}/${classes}" debug="true"
debuglevel="lines, vars, source"/>
Also, I cannot place a watch file in any variable.
Is there a configuration that I need to do with the java compile or OC4J to be able to see the content of the variables.
Thank you
P.S. with Jdev I'm able to debug with the embedeed-OC4J but the config of the \j2ee\home\config\*.xml files are totally different.

Starting oas server with this command, -Xdebug -Xrunjdwp:transport=dt_shmem,server=y,suspend=n,address=4000,
Eclipse debugger cannot connect anymore but apparently dt_shmem is used for windows machines and dt_socked for unix.
Any hints would be greatly appreciated.

JSP Debugging with Eclipse 3.2 WTP

I am using OC4J 10.1.3 Standalone and the latest version of Eclipse WTP. Has anybody been able to debug JSP pages with this configuration? I have found a few references to getting remote debugging to work using JDeveloper, but nothing regarding WTP.
I have tried setting the debug <init-param> to class, but the breakpoints are not hit when starting the server in debug mode. I have also set the debug_mode and emit_debuginfo init parameters to true. The development attribute in the orion-web-app element is set to true.
I have tried starting OC4J using the following command:
java -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000 -jar oc4j.jar
and then debugging through Eclipse using a Remote Java Application launcher and connecting to port 4000. Again, no breakpoint is hit even though Eclipse does connect ok to port 4000.
I am trying to debug a simple JSP named index.jsp with a breakpoint on the line <% out.print("Hello, World!"); %>. Nothing fancy.
Do I need to use the JspOjcCompiler compiler even though I am not using JDeveloper? I was not able to get this compiler to work. It was failing with the _index class not found.
Thanks,
Dave

Hi, I didn't get an email notifying me of a response to this. Just happened to check myself.
          But basically you want to point the weblogic server directly to your workspace (src code) so it can detect a change. THis is from our doc below. You may also write an ant script specific to weblogic that redeploys the app and reloads the xml and prop files without restarting the server.
          1.     Start up your Weblogic domain server (i.e., C:\Domains\devDomain\startWebLogic.cmd).
          2.     Go to url, http://localhost:7001/console and log in (weblogic, weblogic).
          3.     On the left menu, click Deployments, then Lock & Edit button above it, and then the Install button in the main panel.
          4.     Change the location to the web folder in your project workspace (C:\Eclipse\workspace\<projectname>\web) Click Next.
          5.     Leave checked the Install this deployment as an application and click Next.
          6.     Put name for Name of deployment. . From here you can click Finish.
          7.     Click Activate Changes. Then check the deployment box and click Start button and Servicing all requests (in Deployments panel). Then click Yes to start it on the next page
          8.     Enter the URL of the application. This example is
          http://localhost:7001/web/index.htm
          The ?web? was the name of the web folder we deployed from. In the future you could name this something different if deploying from this console so the url?s do not conflict.
          Edited by mwooten77 at 01/18/2007 9:34 AM
          Edited by mwooten77 at 01/18/2007 9:35 AM

Poor Performance with BouncyCastle provider in Oracle JVM

When I run the BouncyCastle provider with Oracle JVM in the database, it runs poorly on the first call, but second and subsequent calls aren't so bad. What options do I have:
1. Ncomp? If I go this route, does someone have the necessary scripts and suggestions for using an open source/free C compiler rather than Visual Studio?
2. Is there a way that I can "pin" these java classes/objects in memory? (classes from BouncyCastle) How would I know what classes to PIN? I can run an execution profiler against it on the client, but will that tell me everything needed to pin?
BTW, here's the results of a performance test of two consecutive runs with some embedded System.out.println calls for the timestamping:
Here's the update.... Most of the time on initial call is taken to read the keystore (2.2 seconds) and then decrypt the card (~16 seconds)
08/09/2007 09:44:23.468: init - Start
08/09/2007 09:44:23.468: Security.addProvider()
08/09/2007 09:44:23.593: getConfiguration()
fileName=S:\keystore\clientkeystore
password=test0723
alias=encryptKey
keyPassPhrase=test0723
08/09/2007 09:44:23.593: read KeyStore
08/09/2007 09:44:25.765: init - End
08/09/2007 09:44:25.765: getEncryptedBytes:
08/09/2007 09:44:25.781: decrypt-Start
08/09/2007 09:44:41.62: set return value Here's the second pass:
08/09/2007 10:13:48.31: init - Start
08/09/2007 10:13:48.31: getEncryptedBytes:
08/09/2007 10:13:48.31: decrypt-Start
08/09/2007 10:13:48.359: set return valueThanks a lot! Apologies for all the questions, but I'm really at a loss with this.
Eric

Hi, i have the same problem, did you find a solution?
Thanks

Myrio debugging shared library (so) with eclipse

Hi,
has anybody experience with debugging shared library files in eclipse?
I have created a shared library file in eclipse and downloaded it on the myrio device into following location: \usr\lib. I´m able to access the file in Labview.....this wors great. But I want to debug this file in Eclipse like explained in the following NI tutorial: http://www.ni.com/tutorial/14690/en/
But I'm not able to get it running. In the debug view of Eclipse I get 2 Errors. In the Disassembly window: "Cannot access memory at address 0x0" .
And the other is: "No source available for "" "
Has anybody experience what I must do to get it running?
Thank you very much!
regards
Holger

Has nobody experience with this problem?
I will explain a little bit more......
I want to debug (with setting Breakpoints) a shared obefect file in Eclipse. For convenience I created a very simple C File:
This is the dedicated project tree with the succesfully created so-file:
I copied the created so-file to the MyRIO device with the remote system Explorer to the following location: \usr\local\lib
Next I have make a power-cycle from the myRIO device. After that I can sucessfully include the .so file in Labview. This works all great to this point:
But I want more.....I want debug the c-file in Eclipse and follow the NI tutorial: http://www.ni.com/tutorial/14690/en/
I have set up the debugger like explained in the tutorial:
But if I debug I get this window with several errors:
Hope someone can help me to get it running!
Many thanks!
Holger

Debugging Oracle JVM with Eclipse

Similar Messages

Maybe you are looking for