Decimal Problem in fields

Hi,
In Export invoice we are entering currency in USD.When we enter the value it accepts 3 decimal places.But it is stored as 2 decimal places in table.
Eg.2.059 USD in invoice screen
but in table 20.59 USD.
What is the problem?where we can rectify this error?

It will be stored with two decimal places. No issues with that. when you display this on your report, you have to specify the currency as USD and your issue will be resolved.
write: v_amount to v_amount currency 'USD'.
I am quoting from the help of the write statement below.
This addition defines currency-dependent decimal places for the output of data objects of data types i or p. For all other data types, except for f, the addition is ignored. For cur, a three-digit, character-type field is expected that contains a currency key from the column CURRKEY of the database table TCURX in uppercase letters. The system determines the number of decimal places from the column CURRDEC of the respective row in the database table TCURX. If the content of cur is not found in TCURX, two decimal places are used. The following applies for numeric data types:
In the case of data types of type i, a decimal separator is inserted at the position determined by cur and the thousands separators are moved accordingly.
In the case of data objects of type p, the decimal places defined in the definition of the data type are ignored completely. Irrespective of the actual value and without rounding actions, the decimal separators and the thousand separators are inserted at the positions in the numbers determined by cur.
In the case of data objects of type f, the addition CURRENCY has the same effect as the addition DECIMALS (see below). Here, the number of decimal places is determined by cur.
If the addition CURRENCY with length specification * or ** is used after AT, it is used first and the output length is determined from the result.
Note
The addition CURRENCY is appropriate for the display of data objects of type i or p without decimal places, whose contents are currency amounts in the smallest unit of the currency.
Example
The output of the WRITE statement is "123456,78".
DATA int TYPE i VALUE 12345678.
WRITE int NO-GROUPING CURRENCY 'EUR'.

Similar Messages

Problem with field symbols in ecc 6.0

i have the following code written in 4.6 version   now i am executing the old report   in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
    <line_of_bs_table> LIKE tbl1024,
   READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
    buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type   '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.

Hi elinuk,
you have already posted this thread in the ABAP general forum under problem in field symbols in ecc6.0 and I think that this forum is more related to this issue than the DMS forum. So please close this thread and investigate this issue further in the ABAP general forum.
Best regards,
Christoph

Very urgent : Problem with field attributes in Datasource

Hi
I am getting a problem with field attributes in the datasource.
The issue came up after i modified the extract structure-i modified one field and
added one field to the structure.Now those two fields are not visible in BW.
When i checked with transaction rsa2, i could find that for those two fields , the
field attribute is <b>'A'</b> which is <b>'Field in OLTP and BW Hidden by SAP'</b>.
I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
Please let me know what can be the issue.
Regards
Leon

Hi,
did you change this attribute via RSA2?
you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
Replicate your datasources in your BW.
Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
Maintain your TRules
Activate
hope this helps...
Olivier.

Problem with field GL Account is that it shows concatenated Chart of Accoun

Hello . Please help me. We have sap BI olap universe . problem with field GL Account is that it shows concatenated Chart of Accounts. But user want to trim the chart of account and show only account in list of values in webi report.
So What code I can put in Universe to remove this " 9000/" WHICH IS Chart of acct from GL Account
example List of values shows
9000/99030
9000/99070
I want to show as below
99030
99070
I tried replace function in universe it does not work. Pls help.
Thanks
soniya

Hi,
You can do it in Web Intelligence using the function Right().
Depending on the SAP BW version you have it is possible to build such calculated expression in universe on uniquename or name:
<EXPRESSION>RIGHT[0CALMONTH].currentmember.uniquename,5)</EXPRESSION>
OR
<EXPRESSION>RIGHT([0CALMONTH].currentmember.name,5)</EXPRESSION>
You have to replace 0CALMONTH by the unique definition of GL Accounts and you also need to use the object referencing GL Accounts in your query in addtion to the calculated expression.
Regatds
Didier

Problem with field label

Hello All,
I am having a strange problem with field label? I have created a table with three fields one is MANDT and and the remaining fields as PATID and PATNA.
I am maintaining the field label for these fields, but still i am not getting the names of the fields while i am calling the structure in my alv tree.
I d'nt know what is the problem here?
can any one tell me how can i solve this issue?
Regards,
Lisa

Hi lisa,
This is not the problem with Data Dictionary,
While declaring the fieldcatalogue for thr GRID.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE              =
   I_STRUCTURE_NAME             = 'ZTABLE'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_BYPASSING_BUFFER           =
CHANGING
    ct_fieldcat                  = gt_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If gt_fieldcat-fieldname = 'PATID'.
gs_fieldcat-ref_field = 'ZTABLE'.
modify gt_fieldcat from gs_fieldcat.
clear gs_fieldcat.
endif.
Because while calling the FM it is populatinh the fieldname
so you need to modify the fieldcatalogue with fieldname then it will pick the field labels from the Dictionary.
Hope this will solve your problem.
Regards,

Problem with field KONWA-Rate Unit(Currency or Percentage) of table KONP

Hi Gurus,
I m facing problem with field 'KONWA -Rate Unit (Currency or Percentage)' of table KONP. This field is showing Currency and '%' both in table KONP. For some materials its showing currency value and for some its showing '%'. Due to which its creating load problems. My question is how this '%' is coming (means is there any calculation behind that or something else) in table KONP and how can I identify this.
I am sure u will have the answer for this question so Thanks in advance.
Message was edited by:
        Amit Rajput
Message was edited by:
        Amit Rajput
null

Hi,
take the following example: you sell liquor to customers; in your country, when you sell liquor your company is entitled to pay customs and excise fees to governamental authorities.
These excises and duties are a percentage of the retail price. You'll then create such a condition record with this rate so that you calculation schema will post the correct value during the processing of billing documents...
hope this shed light
Olivier.
Message was edited by:
        Olivier Cora

Dynamic ITAB copy problem with field type P

Hello everyone
I need to copy the structure of an internal table that is pass by reference into a method.
Actually everything is fine else than the field type P with decimal is not created properly in the new itab.
Scenario:
An internal table is pass by reference to a method. We need to trait the data without modifying the original table. The Idea is to copy the structure and the data of the referenced internal table into an internal table created dymanically in the method.
Here is what I did and working fine when there are no field of data type "CURR".
Extract the structure of the reference data.
Create a dynamic internal table.
So far so good. Everything seams to work fine. BUT
when I am trying to copy the data from the reference table to the just created internal table the field with data type "CURR" doesn't work.
Here is my example:
FIELD-SYMBOLS: <FS_TABLE> TYPE STANDARD TABLE,
               <TMP_TABLE> TYPE STANDARD TABLE,
               <LS_TMP_TABLE> TYPE ANY,
               <LS_TABLE>     TYPE ANY,
               <LS_VALUE>     TYPE ANY.
DATA: lt_data      TYPE STANDARD TABLE OF vbak,
      ls_data      LIKE LINE OF lt_sortfield,
      ref_data     TYPE REF TO data,
      l_structure TYPE REF TO DATA,
      lv_ltname    TYPE string.
select * from vbak UP TO 10 rows INTO CORRESPONDING FIELDS OF TABLE lt_data.
* --- Assign the reference variable to the table
* ---- Only use to simulate a parameter that is assign to a reference to a internal table
unassign <FS_TABLE>.
lv_ltname = 'lt_data[]'.
ASSIGN (lv_ltname) to <FS_TABLE>.
GET REFERENCE OF <FS_TABLE>[] INTO ref_data.
* --- Assign the reference to the field-symbol
UNASSIGN <FS_TABLE>.
ASSIGN ref_data->* TO <FS_TABLE>.
* --- Create a working area for the reference table to a field-table
CREATE DATA l_structure LIKE LINE OF <FS_TABLE>.
ASSIGN l_structure->* TO <LS_TABLE>.
* --- Retrieve the structure of the field-symbol pointing to the internal table
DATA: lr_tabledescr   TYPE REF TO cl_abap_tabledescr,   " Internal Table description
      _r_structdescr TYPE REF TO cl_abap_structdescr.
lr_tabledescr ?= cl_abap_tabledescr=>describe_by_data( <fs_table> ).
_r_structdescr ?= lr_tabledescr->get_table_line_type( ).
* --- Read internal table structure to create dynamic internal table
data: ls_struc like LINE OF _r_structdescr->components,
      xfc           type lvc_s_fcat,
      ifc           type lvc_t_fcat.
* --- Why the field (component) NETWR length is now 8 instead of 15?
LOOP AT _r_structdescr->components into ls_struc.
clear xfc.
xfc-fieldname = ls_struc-name .
xfc-datatype = ls_struc-type_kind.
xfc-inttype   = ls_struc-type_kind.
xfc-intlen    = ls_struc-length.
xfc-decimals = ls_struc-decimals.
append xfc to ifc.
ENDLOOP.
DATA:   dy_table      type ref to data,
* --- Create dynamic internal table
call method cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = ifc
IMPORTING
    ep_table        = dy_table.
* --- assign reference internal table to Field-symbol
assign dy_table->* to <tmp_table>.
unassign <ls_tmp_table>.
DATA: ls_tmp_struc type REF TO DATA.
CREATE DATA ls_tmp_struc like LINE OF <tmp_table>.
ASSIGN ls_tmp_struc->* TO <ls_tmp_table>.
Loop at <fs_table> INTO <LS_TABLE>.
MOVE-CORRESPONDING <ls_table> TO <ls_tmp_table>.
APPEND <ls_tmp_table> TO <tmp_table>.
ENDLOOP.
* <fs_table>-netwr length is 15
* <ls_tmp_table>-netwr length is 8
* ??????????? Why the length is different?
* ??????????? It should a structure copy and have the
* ??????????? same length
I use VBAK as example, and the field NETWR is using data type "NETWR_AK" where it us a data type "CURR" with length 15 and decimal 2.
When reading the structure, the method get_table_line_type of the class cl_abap_tabledescr return a length of 8 instead of 15.
Any idea how to get the exact structure of a variable that is refering to a data type?
Regards
Daniel

Hello Everyone
Thank you for your replies.
I think I didn't explain myself clearly.
My goal is to be able to create an exact structure copy of a "Type ref to data" into a new internal table that is not defined yet.
Example:
A method contain a parameter that is a ref to DATA type.
That parameter is refering to an internal table from the calling program.
Now I want to create an internal table into the method where this one will be an exact structure copy of the parameter.
So, lets put some name here.
parameter: ip_data type ref to data.
FIELD-SYMBOLS: <FS_REF_DATA> TYPE STANDARD TABLE,
                                <FS_CP_DATA> TYPE STANDARD TABLE.
ASSIGN ip_data->* TO <FS_REF_DATA>.
" some code to assign the same structure to <FS_CP_DATA> from <FS_REF_DATA>
" than copy the data from <FS_REF_DATA> to <FS_CP_DATA>.
<FS_CP_DATA> [ ] = <FS_REF_DATA> [ ]. " This is working if no type P with decimal exist into the structure
" Than I can play with the data of <FS_CP_DATA> without modifying the data of <FS_REF_DATA>.
My problem would be solved if I can create dynamically an internal table that has an exact structure copy of the passed parameter.
Regards
Daniel

Problems accessing fields in a CMP entity bean from a session bean

Hello everybody,
I'm getting the next problem: when I try to access a field in a CMP entity bean that I have instantiated from a session bean (trhoug entitybean.getNameOfField), I get the error "the entity bean does not exist in the database".
This entity bean is accessing a table in an external database (not the DB of the WAS), but I know that it's getting the correct data from the table, since I check the entitybean.size() and the entitybean.findByPrimaryKey(), and I get the right information. For some reason, the only thing that it doesn't work in the entity bean are the getter/setter methods (I created them automatically after having created the entity fields).
I access the entity bean through its local interface...
I know it's really difficult to give an answer with so few details, but... does anybody think I forgot something important to configure??
Thank very much in advance!!
Isidro

getter and setter methods for cmp-fields are abstract.
getter and setter methods for cmr-fields are abstract.
"John Lee" <[email protected]> wrote:
>
Hi:
Which method in a CMP Entity bean should be abstract? just only SetXXX
and
GetXXX?
Thanks!
John Lee

Problem with field catalog after upgrade from 4.0

Hi experts,
We have recently upgraded from CRM 4.0 to 5.2.
I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
Any comments or suggestions will be highly appreciated.
Best regards,
Anders

Hi,
If you did just install database, then you use Embed PL/SQL Gateway.
See this guide
Upgrading Oracle Application Express in Oracle Database Express Edition
I think you have not run step 5 script apxldimg.sql
Regards,
Jari

To Remove zeroes after decimal in screen field

I need to remove the zeroes after a decimal like for a field of the type VBAP-KWMENG the is shown as 200.000 i need to show it as 200.I have to display this value inside a Table Control.

hi,
you can user "write to" statement with formating option.
In your case,
write VBAP-KWMENG to l_var1 DECIMALS 0.
so you will get l_var1 without any decimals and now you can populate this variable in your control.
Please reward points if you find it useful.
Regards,
Jigs.

Problem with field Period

Hi Experts,
i am facing a problem while running report Fixed Costs reporting for field Period when i run with default values which is 12 it will work But i run with period 13 it show error (invalid interval from value is grated than to value) while designing the report painter they have assumed a year will have 12 periods but in actual our client has 13 periods so this error happens Can any one help how we change selection-screen values in report painter.
T

hi
if report is std. one then copy it to z one and comment validation ,
OR
if it is Z allredy then do comment validation there.

Query Decimal problem

Hello experts.
I have a problem with decimal on a query that its used in a VDT.
In the dev system it works fine, but when I transport it to Prod system, the decimals doesn't represent fine.
An example:
dev system prod system
2,50 UN 3 UN
Does anyone help me on this.
Thks
Vitor Ramalho

hi,
If you are not getting the decimal values let us say 2,50 instead of 2.50 then what you need to do is go to your user profile in production and select defaults tab and select the required decimal notation. The report should now show the values 2, 50 as 2.50.
Hope it helps.........

Problem Updating fields in Service Confirmation

Hi Experts,
I have a requirement to copy the service items to the service confirmation. To do this i am making an event and copying.I am successful in copying the items from Service order to confirmation once the items are released,but due to some CO integrations it is required to also populate the service order number and its item number to the confirmation item too,which i am not able to so.
I think i am missing something during CRM_ORDER_MAINTAIN for this entry.It will be a very great if you experts can guide me.
Thanks,
SA

Hi Experts,
I am now successful in Updating the fields, but right now my problem is when i have not kept any restriction on the status for the event i created, I find that during event trace it fires twice the event, once with the My user name Say 'X' and at the same time it fires with User name 'Y', which we have used for middle ware purposes.
Anybody has any idea why is tht so..and how can i correct it.
thanks,
SA

Problems with fields of type NUMC

Hi,
I have the following problem in SAP XI -> SAP R/3 synchronous scenario via Abap Proxy.
The SAP Proxy returns a BAPIRET2 structure and the field NUMBER of this structure is a NUMC. The field NUMBER is not obligatory and doesnt have any value by default.
The problem occurs when the value of this field NUMBER is 000. In this case no tag for field NUMBER is generated in XML message and in SAP XI I dont see this value.
Can you help me with this issue?
Thanks
Regards
Elsa

Hi Elsa,
create a string field in your interface, regenerate your proxy and fill the new field with value of NUMBER.
Regards,
Udo

Problem with Field Mapping

Hi all,
I have problem in workflow. I have created a worklist record. when i try map it with a "Record Field", there are no records and fields at all. Can any one tell what is the reason for this?
Thank you,
Bye.

Give you give some more details on your question.
Jayaprakash Tedla

Decimal Problem in fields

Similar Messages

Maybe you are looking for