Decimal removal in the case of smartform

Hi All,
I have to display a quantity field and units of measure in the smartform. If the units of measure eq 'PC' i should not display the decimal places for quantity in the smartform output, otherwise i have to display the decimals in the output. How to do this....any help would be highly rewarded. I have used the following to resolve the same issue in case of ALV.
for exmpl.
lt_fieldcat-fieldname = 'MENGE'. " Quantity Field
lt_fieldcat-qfieldname = 'MEINS'. " Reference to Units of measure field
How to resolve in case of Smartforms...any help would be highly appreciated.

Ramineni,
Create a node with program line and write the code there.
Code :
data : c_menge(20) type c.
data : c_temp(10) type c.
if meins = 'PC'.
   c_menge = menge.
   split c_menge at '.' into c_menge c_temp.
   menge = c_menge.
   clear c_menge.
endif.
Now MENGE contains the quantity without decimal places.
Reward points if useful
Regards,
Sujatha.

Similar Messages

B1 Query returning truncated decimal places when the CASE statement is used

Hi All,
Perhaps this is a friday thing.
In B1 the price setting is for 5 decimal places. I have a query the run a business process looking at the data in the Special Prices Tables. When I run the Query in SQL, the output show the correct number of decimal places. However, when the Query is then saved and run in B1, the output is truncated to 2 decimal places. Any ideas as to how I can prevent this for happening?
T0: Points to teh OSPP Table
T1: Points to the OSP1 Table
The portion of the query causing the issue is as follows:
case
   when (T1.price is not null) then
         T1.price
   else
       T0.price
end

Hi Earl
Seems you are right, I have tested with a few different formats and each time get a 2 decimal result. In SQL help I found the following which may explain why:
Result Types
Returns the highest precedence type from the set of types in result_expressions and the optional else_result_expression. For more information, see Data Type Precedence (Transact-SQL).
Even tried it in SQL with a stored procedure storing to a temp table and it shows the full decimals, but executing the SP in SAP Business One results in 2 decimals again.
This is indeed a strange occurrence and I a not sure how you are going to solve it! You can use NVARCHAR for example except that it right aligns the values returned, but at least it doesn't drop the decimals.
Kind regards
Peter Juby

Blackberry Curve, when I take it out of the case/pouch/holder it disconnects calls

Hi all,
I would be grateful for any help with this.
I have a leather case for my Blackberry, it's a proper Blackberry case with the logo. If I receive a phone call, as I take the blackberry out of the case it disconnects the call.
This is my second case and still have the same problem
I received this phone for Christmas last year and each time I receive a call I remove from the case, it disconnects call and so I have to call them back.
I really need to get this sorted!
If the phone isn't in a case it works fine.
If anyone can help me I would be very happy!

HSingh2012 wrote :
You pull out the battery cover, take out the battery and put it back on while the phone is on
Yes its called a Hard Reset also known as Battery Pull Retart, We can't reload the Battery OS ,our BlackBerry Battery are Lithium -ion Battery it don't have any OS .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

Black spots at the side (silver part) of my iphone 4s when i remove my jelly case

Do you have some tips on how to remove the dark spot on the side (silver part) of my iphone 4s i guess this cause of my jelly case
do you have some tips or idea on how to remove this without damaging the iphone?

The marks are caused by dirt trapped by the case. Try a soft unwashed washcloth, and a single drop of water.

The query screens are case sensitive I want to remove the case sensitivity

The current query screens are case sensitive ,I want to remove the case sensitivity is there a setting somewhere to remove this or how else can this be done.
Example:In the restrict value range of the query screen.If we give for a particular field anything in capital letters/small it should take.
Please let me know ASAP
Thanks

Hi pavan,
generally case sensivity is related to InfoObject Master Data.
Take a look via Tcode RSD1 to the master data of your InfoObject and check in first screen if flag for capitol letters has been marked.
If this is the situation it is a problem, because MAster Data in cube have been saved as different if are written like "Letter" or "LETTER".
Ciao.
Riccardo.
Message was edited by:
Riccardo Venturini

Removing the case

This may sound like a stupid question, but I just bought a memory card for the BlackBerry 8300. And I've been trying to get the case off of the phone the past 15-20 minutes with no sucess. Has anyone else had any trouble removing the case? Any tips?

The case, you mean the rear door or the battery door?
On the 83xx model, just press the small silver tab towards teh bottom of the door with your fingernail and move the door upwards to remove.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help please - how to remove the case....

I am working with my son to remove the case on his powerbook g4 17 1.5 to replace the hard drive. there is apparently a screw somewhere in the middle of the keyboard.
Without having to remove too many keys, can someone please give me a clue? Thanks in advance.
Powerbook g4 17 Mac OS X (10.4.7) replacing hard drive

You really want to be following this ...
http://www.ifixit.com/Guide/55.0.0.html
... which is a full disassembly guide for this PowerBook. I used it to replace my hard drive, and while it was a bit scary, it would have been impossible without that awesome guide.
PowerBook G4 Mac OS X (10.4)

I'm trying to change my phone case, i have the bumper that screws in if i goto the apple store will they unscrew the case for me?

I have the bumper case that screws in so it doesn't fall apart, but i want to take it off. Will the apple store unscrew the case for me? or would i have to go to At&T to have them screw it off?

Hey,
I can confirm what xtremecaron has said, Apple will defo not remove the bumper for you. Best bet is to try different screwdrivers.

Dreamweaver cs5 problems and adobe support close the case on you

I emailed Adobe support with the message below and they closed the case on me and told me to go over to the developers connection website and open a case there. Well of course there is no where to open a case there, it brings you back to the normal support pages, so I opened a case again!
This is just one of the flaws in Cs5 I've found from intensive useage yesterday.
1. Hangs for nearly 2 minutes if you use an external link to ny file like jquery in the header of the pages - detailed below
2. Sometimes when selecting a related file it says "not on server" and actually tries to open ANOTHER ftp connection listed. It switches connection and then says"not on server" - well of course not....because it just changed to another server! However many time you change it back, it won't have it.
3. The pop up css is a good idea but not well thought out. I have to right click to get inspect but when I roll over the areas it doesn't show the css in the css panel. If I right click and select to show the code, it shows me the css, I then have to click it to select it in the left column. All very long winded... WHY NOT JUST CLICK AN AEA ON THE LIVE VIEW PAGE AND IT SHOWS THE CSS THERE INSTANTLY TO EDIT?!
4. On first open after a quit and relaunch, or restart, switching from normal view to live view hangs Dreamweaver for over a minute before live view is displayed.
Very very buggy and I feel I have paid for a beta version.
Hello I now have Dreamweaver CS5.
It has MAJOR flaw.
If a webpage contains the code
<script type="text/javascript"
src="http://code.jquery.com/jquery-1.4.2.min.js"></script>#
It takes over 1 minute to open each page after launching
This is caused by the 'related files' facility
THIS IS TOTALLY UNACCEPTABLE in software which is this expensive.
All design companies such as us use jquery.
Please fix this flaw asap or supply me with a fix. Turning of related files
helps but if I was to do that what would be the point in
having that facility? (which I am paying for!)

Hi,
Appreciate your reply and accept what you say, I'll take on board the suggestions.
My answers under yours below
Second, the Bug Report form is here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform . Technical support is not a bug reporting center, nor are they developers which is why they probably closed your case. And there really are not any questions in your support request it reads like a bug report and an angry one at that, not even starting out calm, shouting almost immediately.
- Frustration, I've been up all night, hours messing with it.
Thanks for the link, I'll post to that. I personally don't agree that bugs this big should be present in software of such high upgrade fee's and which should have been tested but I guess we all know its the way of the world now.
1. Why are you working with remote website files that are not part of your domain and not in your local site? This is a bad practice to get in the habit of. If their website shuts down, so does the functionality of yours. Many here will argue that point.
- This is a valid point I've come across before and reading up on it I found it was said that the site in question was on cloud servers, mirrored etc. The link I posted was from someone elses post who was having a similar problem. I personally use the flowplay/jquery main link which has ALL the jquery plugins/effects so whatever is used on that page works.
http://cdn.jquerytools.org/1.1.2/full/jquery.tools.min.js
We did this as it seemed that was what everyone was doing, it seems I am wrong and I take on board your comments about downloading the file.
2. "Sometimes". That is the key word in your statement. Sometimes it happens, sometimes it doesn't. What happens when it says "Sometimes not on server" and what happens in the other times. What's different? It's usually hard to believe it's random luck. But developers in a bug report need to know these things. What's different about the file(s)? Is it with certain file(s), type(s), etc? How would it open another FTP connection, do you have multiple FTP locations defined within one site definition?
I probably used the wrong word in 'sometimes' - A better description would be "some of the related files". When live view is on the right and code on the left, related files across the top. If I hover my mouse over the files, it tells me where they are. This info is incorrect on 'some' of the files, not all of them but about 8 out of 10.
It shows the file as being in the folder of another account in the site defs, but its not in there, it's in the one I'm working on (and which is live in the ftp file window). So if I click on the file to view it, it says its not available, and asks if I want to download it from the server. That doesn't work because it then tries to switch the ftp connection to the other site and download.
I thought it was muddled so I removed all the ftp sites and set up just one, the one I was working on. But that didn't work... it then thinks the related files are in "unnamed site 1" - anywhere but looking in its own folder or on its own ftp server!
4. You seem to be referring to Question #1 here so that is answered.
"Please fix this flaw asap or supply me with a fix." - So you are saying Please fix this flaw with a patch or give me the patch. Again, this sounds like you want to file a bug report and not create a support request.
- Accepted, you are right, its a bug report, just they directed me to the developer website and I kept ending up here, so began to believe this is where I should be posting.
"All design companies such as us use jquery". - While I wouldn't be so quick to say all, but rather most, I would say see my answer to #1. Why make your site dependent on someone else's?
- Accepted, I appreciate your honest comments and critism and fot taking the time to reply :-)

I have unchecked the "Sync Music" option in iTunes, and so I assumed that meant there would zero songs synced to my iPhone. Howver, there are still 223 random songs on my phone. How do I actually remove all the songs?

As you can see, in this photo I have the "Sync Music" button unchecked and yet when I sync my phone (in the hopes that I will be getting rid of all the songs) there are still 223 songs left on my phone, taking up space that I need.
How do I truly get rid of these songs, or is this just a weird glitch? I would have assumed that by unchecking "Sync Music" that meant there would be no more MUSIC left on my phone, but that is not the case.
Thanks in advance!
Amy

Hello amyb3213,
Thanks for using Apple Support Communities.
If I understand your post correctly, you are wondering why you still have songs on your iPhone even though you have disabled music syncing in iTunes. After disabling syncing, did you press sync to then apply those sync settings? Are the songs on your iPhone ones that you have downloaded from iTunes in the Cloud?
You can manually delete songs from your iPhone by following the steps below.
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
Playlists - iPhone
Cheers,
Alex H.

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

Win 8.1 Metro apps re-installing after being removed from the reference image

Scenario:
MDT 2013 - Build reference image for Win 8.1 on hyper-v executing the following commands removing all metro apps.
Powershell.exe -Command "&{Get-appxPackage -AllUsers | Remove-AppxPackage -ErrorAction SilentlyContinue}"Powershell.exe -Command "&{Get-AppXProvisionedPackage -online | Remove-AppxProvisionedPackage -online -ErrorAction SilentlyContinue}"
Install windows updates and perform sysprep and capture wim task
Import Wim into Sccm 2012 r2 and deploy with standard mdt task
Problem:
After deployment all Metro apps are reinstalled or reinstalling.
Notes: Setting Copyprofile True is ignored and have tried various methods and it is always ignored.
If I use the wim from sources\install.wim and I either dism /remove-appx... or powershell in win PE get-appx -path | Remove-appx...
If that wim is modified and used then it deploys without the Metro apps but it doesnt have any windows updates. If I use that wim to build the reference image it will have no metro apps but after capture and deploy through sccm the metro apps start
to re-install.
Below is the unattend.xml
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner></RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Pacific Standard Time</TimeZone>
<CopyProfile>true</CopyProfile>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.microsoft.com/</Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner></RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://sccm1/deploymentshare$/operating systems/windows 8.1 enterprise x64.1/sources/install_windows 8.1 enterprise.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Yes as I've removed it both via get-appxpackages | Remove-appxpackages and via the dism commands.
I have found also that wasn't getting a good sysprep. Problems with copy profile lead me to try doing a manual sysprep where I found I was getting failures in my sysprep. The problem was that I was disabling the windows store service in my reference
image.
I was very hopeful that was going to be the resolution but it appears that is not the case.
2014-09-26 07:15:03, Error SYSPRP WSLicenseCleanUpState failed with hr=c0020017
2014-09-26 07:15:03, Error [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'WSLicenseCleanUpState' from C:\Windows\System32\wsclient.dll; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0xc0020017
2014-09-26 07:15:03, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0xc0020017
2014-09-26 07:15:03, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0xc0020017

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

Decimal removal in the case of smartform

Similar Messages

Maybe you are looking for