Default Activity changing when it should not

We have a problem where if I use a general task list with 2 operations and both have a seperate activity type assigned, when creating a new SM order we pull the Tasklist into the order but we change the default work centre, this change in default work centre causes the default activity type on the first operation to change to the same default activity type as the one on the second operation which is undesired.
However it is inconsistent when this happens has anyone seen this before or does anyone know if there is an OSS creection for this problem, although I suspect it may be data setup related.
thanks

The script have to be something like:
*WHEN RPTCURRENCY
*IS LC
*WHEN RCOST_CENTER
*IS RCCA_NONE
*WHEN AUDITTRAIL
*IS CC_FY
*WHEN TIME
*is 2015.12
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.01", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.02", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.03", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.04", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.05", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.06", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.07", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.08", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.09", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.10", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.11", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.12", AUDITTRAIL = "CC")
*ENDWHEN
*ENDWHEN
*ENDWHEN
*ENDWHEN
Without any *XDIM_MEMBERSET!
Vadim

Similar Messages

Excel row height changes when it should not change

I have a client using Office 2010 on a Citrix server. They are using Windows XP Pro SP3 for the desktop and the server is running Windows Server 2003 R2 STD.
I have two users working in a spreadsheet in Excel 2010. The spreadsheet opens fine and they can perform their updates by either adding manually or doing a cut and paste. The problem comes up when all of the sudden a number of rows in the spreadsheet
change height for not reason. The spreadheet has the row height set to 14.5 but for some reason the rows that change height sent the height to 405.9. Usually all the user has to do is go back and reset the row height on these cells and save before they can
go back to making changes.
It's more annoying then anything else so if someone could provide any solutions, it would be greatly apppreciated.
thanks, Joe Trainor
Joseph Trainor [email protected] Weidenhammer Systems Wyomissing, PA

I have been working with Excel for 20years, and have been hit with this resizing of row height and also drawings or shapes, after opening an old XL97-2003 file.
Chad's method below works!
Please try the following to resolve the issue:
1. Boot Excel 2010
2. Open [Excel Options] dialog. ([File]-[Options])
3. Select [Advanced] tab, turn on [Cut, copy and sort inserted objects with their parent cells] option. (In [Cut, copy and paste] section)
*This will not resize rows that are currently set to 409.5 but I would like to know if this keeps rows from doing this in the future.
1) I found that after opening the workbooks the row height and shapes are correct.
2) Save the file, then save as to the new .xlsx format (for a macro free workbook)
3) After reverting to former; turn OFF[Cut, copy and sort inserted objects with their parent cells] option. (In [Cut, copy and paste] section), and then opening the XL97-2003 files, the fault is still there. For the newer xlsx files, though,
the fault has gone.
4) So yes, Chad, it does keep rows from doing this in future, if the newer file format is used. Thanks.
Chad's answer is "the answer"!

Should default gateway change when public IP chang...

I understand that hub remains always as 192. etc,
but my question is when disconnecting from internet via Hub or powering down hub, thus getting new public Ip address -should the default gateway change as well?. I always have a constant here?

Thanks John,
there may be some confusion - this is what I'm refreiing to - I may not have been clear, I do understnd that teh Hum i.e. 192.et,etc never changes but under teh following settings on Home Hub manager this is what I see:
network address changes
Primary DNS changes & secondary........so should The default gateway in this box?
TCP/IP settings
Broadband network IP address
81.xxxxxx
Default gateway
217.xx.xx.xxx
Primary DNS
213.xxxxx
Secondary DNS
213.1xxxxx

What is the default staging mode when it is: (not specified) ?

Hi All,
What is the default staging mode when none is specified?
As per docs, there are three: stage, no stage and external stage
http://docs.oracle.com/cd/E17904_01/apirefs.1111/e13952/taskhelp/deployment/SetAServerStagingMode.html
Many thanks.
Running Weblogic 10.3.5.0 on OEL.

"stage" directory means that the EAR file will be temporarily copied to that location and will be used only when the application source directory is not available OR when the administration server is down.
It is like a local copy of the source directory for your application.
Sometimes, during restart/redeployment, the managed server could pick the application files from the stage directory.
But, in general if you use the "Update" option in "Deployment", the files in the stage directory are replaced by the files from the "source" directory.
What I suspect here is in PROD, if you might have any permission issues with the stage directory?
Can you please check that the stage directory is owned by the user running the server process AND that the directory permissions is set to 755. And not only directory the files also should inherit the same ownership and permissions.
That is the only thing I can suspect.
Arun

Firefox thinks Preview is default pdf reader when it's not

Four times, I highlighted a pdf file, got info, changed to Adobe as default, clicked "change all." PDFs that are already on my computer are opening in Adobe, but downloaded PDFs are opening in Preview. Next to "Preview" in the download window, it says "(default)". This is a dropdown menu, but there are no other choices. There doesn't seem to be an option in Firefox to change the default from there, so I assume it's something that has to be done through Leopard.
Any suggestions?

Lalita Sarasvati wrote:
Four times, I highlighted a pdf file, got info, changed to Adobe as default, clicked "change all."
First, I notice you are running Tiger - this is the Leopard forum - things may be different with Leopard.
When I click on a .pdf file with FF, I get a popup window asking to select a reader.
Be sure you check the box, "Do this Automatically ....." in the popup window.
Once you do this, in the FF preferences under Programs, you will now find Adobe listed as the default program for opening Portable Document Format files.
I just did exactly this and it works correctly. PDF files now open with Adobe, not Preview, all the time.

Some words end up being underscored when they should not be

I end up with some words dbl underscored at a site when using fire fox and they should not be
== This happened ==
Every time Firefox opened
== since i installed ff on here

Those are usually IntelliTxt type links.
See http://en.wikipedia.org/wiki/IntelliTXT
You can look at Adblock Plus: https://addons.mozilla.org/firefox/addon/1865
You need to subscribe to a ''Filter list'' (e.g. the ''EasyList''): http://adblockplus.org/en/subscriptions
Adblock Plus forum: https://adblockplus.org/forum/

Default Activity Method call in TF not executing (in ADF Lib)

Hi,
We have created a ADF Lib of a reusable task flow.
The Task Flow contains two activities
(i) A method call {which is default activity and this method belongs to a datacontrol}
(ii) A view activity (which is a jsff)
Now everything works fine if I am using the TF as a region in same project.
But if I create a ADF Lib of it and implement the same to other application (the new application have same datacontrol and method) the default activity "which is method in our case" is not getting executed, rather the jsff executes first.
I am using Jdev 11.1.1.4
Thanks.

Hi Frank,
Thanks for reply.
But, I have provided the same functionality to DataControl, which was working for TF included project.
Apart from that, program control didn't visit the the default activity method body, hence its sure that it never got executed.
Is there any way I can trace it !!

Firefox automatically adds port number in address bar when it should not.

I work for an ISP company that regularly sets up routers for customer locations. One of the things that I have to change on it is to set the management port to 8080. For instance 192.168.0.1:8080. Once I try to setup a new router Firefox automatically assumes that I want to go to the same 8080 port and automatically enters it in for me. Since the new router has not been setup with 8080 yet I can not get in. So basically I would like to see if I can stop Firefox from automatically entering this bit of information in. It is very annoying and even more annoying that I have to use a different browser to make the changes since Firefox can not. I did find a similar fix posted when Firefox automatically enters in ".www" but that did not fix my problem.

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

When ever i have set default search engine It is not constant It changes . It should Not change

Actual :-
I have set default search engine it changes every time when i restart Firefox 9.1 .
Expected :-
The search engine should be the same which was set previously

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Default Logic Script, Appears to Run when It should not

Hello Experts,
I need help with something. When using a Logic Script within the Default Logic in BPC, It runs everytime data is submitted. I have one logic script that copies a "Full-year" value input to each month. See below. So WHEN AuditTrail CC_FY is changed, it copies the value divided by 12 to each month and Audittrail CC. This works correctly. However, an issue came up that when a user wants to change the monthly Value, it defaults back to the value written by the CC_FY Logic Script. I think the Logic script is running again after the user makes a change. Below is the Logic Script and some other screen shots.
CC_FY.LGF (Also inside DEFAULT>LGF)
*XDIM_MEMBERSET AUDITTRAIL = CC_FY
*XDIM_MEMBERSET RPTCURRENCY = LC
*XDIM_MEMBERSET RCOST_CENTER = RCCA_NONE
*XDIM_MEMBERSET TIME = 2015.12
*XDIM_MEMBERSET COST_CENTER = %COST_CENTER_SET%
*XDIM_MEMBERSET ACCOUNT = %ACCOUNT_SET%
*WHEN AUDITTRAIL
*IS CC_FY
*WHEN TIME
*is 2015.12
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.01", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.02", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.03", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.04", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.05", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.06", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.07", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.08", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.09", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.10", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.11", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.12", AUDITTRAIL = "CC")
*ENDWHEN
*ENDWHEN
For Example, I enter $12,000 into December, CC_FY, it puts $1,000 into each month for CC correctly
So then I try to Change January to $250, Save Data
The Value then Returns to $1000. I think its because the CC_FY.LGF is running again, but it shouldn't because there was no Change to the CC_FY AuditTrail Dimension. On the Backend, you can see the changes, and also the reversal of the change, leaving the starting amount $1000.
What am I missing?! Thank you for any input.
Sean

The script have to be something like:
*WHEN RPTCURRENCY
*IS LC
*WHEN RCOST_CENTER
*IS RCCA_NONE
*WHEN AUDITTRAIL
*IS CC_FY
*WHEN TIME
*is 2015.12
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.01", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.02", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.03", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.04", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.05", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.06", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.07", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.08", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.09", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.10", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.11", AUDITTRAIL = "CC")
*REC(EXPRESSION=%VALUE%/12, TIME = "2015.12", AUDITTRAIL = "CC")
*ENDWHEN
*ENDWHEN
*ENDWHEN
*ENDWHEN
Without any *XDIM_MEMBERSET!
Vadim

ITunes library cannot load from NAS - Asking password when it should not...

Hi all,
I just updated from Windows 8 to Windows 8.1, worst idea ever. Tons of problems appeared including this really strange one.
iTunes, for a reason or another, decided to reset my library path, which mean all my songs have the "!" symbol in front, saying iTunes cannot find it. So I went in the preference menu to change it back to what it was (it was on the default folder now). My library was running from my NAS drive, using the "Z" letter on my computer. When I click on the button to change the library folder and select my NAS (it appear in the "Network" field), it ask for a password. Still, there is no password on the NAS, and I have no problems opening the NAS from the network menu BUT from the itunes options...
I tried using my NAS admin account (didnt work), windows account (didnt work), admin admin (didnt work).
What is the most frustrating is that I can go see the files and play them from the NAS on my computer, it's just itunes that is completly broken for no reason...
Is there AT LEAST a way to force itunes to change the folder from a file or something?
Thanks a lot for the help in advance guys.
PS: Really, this is the last time. If I loose my library I will never use itunes again... I'll find any crappy program that can surely not do better, but at least work...

try double clicking a song with a !
in the resulting pop up hit locate
browse to the location of the song and select it
in the next pop up tell it yes to use the location of that song to find other items

Default display changes when connecting to HDTV

My macbook pro has been connecting to my TV appropriately for months. The display is suddenly changing to a different default when I connect now. It was fine two weeks ago and has done 3 software updates in between. I have not loaded other new software. When the thunderbolt connection is made, both screens turn blue, then both display a screen resolution formatting that doesn't fit the screens. Any suggestions?

Do you have your Displays preferences set for a mirrored Arrangement?
In fact check your other Displays preferences as well -- resolutions and refresh rates.

When I should abort a instance, when I should not?

Hi there.
I'm designing a process that controls an insurance policy sale and that has a deadline for it's processing. If this deadline is reached, the process must go through a exception flow which will cancel the sale and decline the insurance policy. My question is: whenever this happens, I should end the process instance within ALBPM with an aborted status or by reaching the end activity after processing the exception?
In other words, thinking in a generic way, one could question: is it okay, withing a modeling view, to abort an instance when a business exception occurs?

Dear Right,
I am working on a project where I need to do reporting using Hyperion from ALBPM work list/process instance data. The report needs to be generated on current instance data as well as completed or rejected instance data. Please confirm if my approach is correct or not.
1) Use BAM or Data Mart database for the reporting on current instance.
2)Use Archival Data for the Reporting on historical data for the instance that are completed and rejected.
However, I have following question for that I didn't find any clear idea. I would appreciate if you get me some help here:
+ Our business process might stay longer for some cases, say could be a year or more before it gets approved or rejected. As per Bea documentation of Business Activity Monitoring (BAM) and Business Activity Data Mart (Data Mart), BAM records information about process instance performance and process workload over a recent time period, usually 24 hours where as the Data Mart stores data similar to BAM, but over longer periods of time.
So what do you/Bea suggest/recommend to have out of BAM and Data Mart? Can it Data Mart hold data for such long.
+ For historical reporting:
0) Does this archival happen from engine Db or BAM/Data Mart?
0) As per Bea; process information is copied to the archive database after a process is completed or aborted, based on the archiving schedule configured in the Process Administrator in the Services pane of the Edit Engine section. And also ALBPM business processes do not require data from an instance once this instance has ended, so process instances are discarded upon instance expiration. So does this also flush out the process instance data from BAM/Data Mart as well or BAM/ Data Mart data will flush out as per duration configured in ALBPM. Please confirm.
+ There must have been some reason while designing the three different way to hold process instance data from:
#1. Engine DB,
#2. BAM/Data Mart,
#3. Archival Database.
Can you please throw some light why it has been designed this way?

Function module when used should not display ALV

Hi ,
All ABAP Gurus
I want to use a function module WS_DELIVERY_MONITOR which should give the VBELN on the basis of CHARG in internal table so that on the basis of VBELN I can fulfil further requirement and display the final output in ALV.
But this function module when executed display an ALV.
My requirement is that it should retrieve all the VBELN on the basis of CHARG (which is in the internal table and is passed to the function module) in an internal table and do not display the ALV so that when all the VBELN come in internal table then I can perform further calculation.
Please guide me in this matter.
Thanks & Regards
Bharti Jain

Hi Bharti,
Please try calling FM 'WS_LM_DATA_SELECTION' instead. This FM is callled inside main FM 'WS_DELIVERY_MONITOR' and is used to fetch data. You will only need to fill extra import parameter for using this FM ( if_flag_inbound) and two changing tables (lt_postab) and ( lt_postab_kodat), which will have results. 'if_flag_inbound' field will be having value X for all inbound cases.
I have used the same FM to get open deliveries:
CALL FUNCTION 'WS_LM_DATA_SELECTION'
    EXPORTING
      if_proctype                 = c_proc_type_f
    TABLES
      it_matnr                    = i_deliv_matnr
      it_lgort                    = i_deliv_lgort
      it_lfart                    = i_deliv_type
      it_kostk                    = i_deliv_kostk
      it_wbstk                    = i_deliv_wbstk
      ct_postab                   = i_deliv_nos
    CT_POSTAB_KODAT             =
    EXCEPTIONS
      no_data_found               = 1
      wrong_proc_type             = 2
      OTHERS                      = 3 .
IF sy-subrc = 0.
**-Calculate open delivery quantity
    LOOP AT i_deliv_nos INTO wa_deliv_nos
                             WHERE NOT posnr IS INITIAL.
      pc_open_deliv_qty = pc_open_deliv_qty + wa_deliv_nos-lfimg.
    ENDLOOP.
ENDIF.
<removed by moderator>
Edited by: Thomas Zloch on Sep 7, 2010 9:06 AM - please do not ask for ...

Help, Does anyone know why my default color change when running a action?

I have just bought and installed cs3 extended and when I run a action after a few steps it changes my default colors back to black and white and then at the end of the action it changes back to the colors I picked for the element I am making but the results are a black element. I have downloaded and ran the update to 10.0.1 and am not aware if there are others or if this is just a setting I can make inside the program. Please help! Thanks Jana

well, I am talking about the default color buttons on the left hand side toward the botton but, the action says at the first to pick the color of your flower so I pick red and the action takes off... then a few steps in it would change to black and white and then back to red and white at the end but the flower came out all black. Okay I am tell you this because so if anyone else has this problem they will know.
This morning I got up and uninstalled my later version of Photoshop PSE6 that was still on my computer( after moving all shared files needed for new PS to my external HD) and deleted the action (drag to trash can ) then loaded the action again and it worked fine pretty little red flower! Now I hope it will remember my styles! I have had to reload them twice.
Thank you, Jana

Default Activity changing when it should not

Similar Messages

Maybe you are looking for