Default Address format

How can i set default address format & show complete name of country & state in pld.

Hi,
Check the following thread
Country Field problem
Re: Address Formats - Country
Invoice ship to State and Country
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

CRM Internet Sales User - address format

Hi !
In the CRM 4.0 Internet Sales application, when 'register.jsp' is triggered to register a new internet user, the default address format always seems to pick the US addressFormular (Zipcode field instead of Postalcode). Would anyone have an idea what change has to be made to pick the correct addressFormular to get the correct address format ?
Regards,
Ashok.

Thanks, Ashok. I will try to get login info.
I just noticed that in inputaddressformat_us.inc, the following portion of the code inside the iterate tag is not getting executed.
<isa:iterate id="country" name="<%= B2cConstants.POSSIBLE_COUNTRIES %>" type= "com.sapmarkets.isa.core.util.table.ResultData" resetCursor="true">
          <% // Should the current country be marked as selected?
             String selected="";
             if (country.getString("ID").equals(defaultCountryId)) {
                 selected="SELECTED";
             } %>
             <OPTION VALUE="<%= country.getString("ID") %>" <%= selected %>>
               <%= country.getString("DESCRIPTION") %>
             </OPTION>
        </isa:iterate>
I think that is the reason. But why it is not executing that code?
Do you have an idea about it?
Thanks,
Harsha

PRCT-1302 : The "OCR," has an invalid IP address format

Dear RAC experts,
I am setting up RAC nodes and during installation it fails with error PRCT-1302.
PRCT-01302: The "{0}" has an invalid IP address format
Cause: The format of the subnet number and/or the subnet mask is an invalid IP address format.
Action: Make sure that both the subnet number and the subnet mask have a valid IP address format.
It seems like everything OK with subnet.
public network
eth0
         Mask:255.255.255.192 / 26
private interconnect
eth1   Mask:255.255.255.240 / 28
private interconnect
eth2
        Mask:255.255.255.240 / 28
Please advice.
Thanks in advance.
RAC 2node
Linux
VMware
IBM

Hey ioannis,
So I would recommend starting from scratch on this one and seeing if we can get things to work. I would recommend following these steps:
Make sure that you have access to port 80, which is what LabVIEW and the Web Server uses for communication. This might mean turning off virus checkers or firewalls, as Altenbach suggested.
Restart your computer. This is to make sure that there isn't anything already accessing this port that is conflicting.
Start LabVIEW once the computer is back up.
Open the VI that you would like to publish. I might recommend using an Example just to test, but you could use your program.
Select Tools » Web Publishing Tool (WPT).
On the bottom of the WPT window, press the Start Web Server button.
Configure your VI as you would like. You can probably just use the defaults for now.
Select Save to Disk and replace the file if necessary.
Hightlight the address that comes up in the Document URL window and press Ctrl+C to copy it.
Open Internet Explorer and past the URL into the address bar on the development computer.
These steps should be all that is necessary to use the WPT, so please follow them and let me know if they help or not.
Thanks!
Andy F.
Message Edited by Andy F. on 03-17-2006 12:41 PM
National Instruments

How to move old address book (XP) into new computer (8.1) as the existing default address book.

I have exported the address book in LDIF format and have also found the abook.mab file in my old XP computer. My new W8.1 address book is totally empty. I don't know where to find the Profile folder on W8.1 and when I import the LDIF it creates a new address book folder which I don't want. I just want everything in the default address book.

Open the newly created address book. Click on one contact to select it. Hit control+a to select them all. Drag and drop them on the personal Address Book folder to move them there.

Mass-change address format in address book

Hi Guys,
I've recently changed from pc to mac (yay) and have imported all my contacts into address book.
I have several hundred contacts that have mailing address in the US, and several hundred that have mailing addresses in the Netherlands and some in other parts of the world.
I'd like to change the address formats to the appropriate ones, but so far have only been figure out how to do that one at a time, or all together.
I can use smart groups to group the addresses I want to change together, but after that I'm stuck.
Is there a way to change the address format from selected cards? or will I have to do this one at a time?
Thanks for your help.
mac mini Mac OS X (10.4.8)
mac mini Mac OS X (10.4.8)

Here is an Applescript you can run that will do what you want:
property CountryCode : {missing value:"us", USA:"us", Netherlands:"nl", UK:"uk"}
tell application "Address Book"
repeat with aPerson in people
set theAddresses to addresses of aPerson
if theAddresses is not {} then
repeat with anAddress in theAddresses
set theCountry to country of anAddress
set the country code of anAddress to my getCC(theCountry)
end repeat
end if
end repeat
end tell
on getCC(aCountry)
set s to "on run {CountryCode}" & return
set s to s & "get " & aCountry & " of CountryCode" & return
set s to s & "end"
try
run script s with parameters {CountryCode}
on error
return text returned of (display dialog aCountry & " not found. Enter a country code:" default answer "us" buttons {"Ok"})
end try
end getCC
In the property statement, change the "us" for missing value to your default country code. Add any other countries you have to the CountryCode list. The first part, before the colon, is the Name of the country as found in your address book. The second part is the ISO country code (two characters). I found a list of ISO country codes here. That list was upper case, but the address book uses lower. If you have variants of the same country name, you can just add them all to the list.
Note: the name of the country cannot be more than one word--I didn't want to work out another way of getting codes. However, if the script runs across a country name that is not in the list, it will ask you to enter the correct value. You can change the "us" in the getCC handler to the country code of multi-name countries in your address book to make it the default answer.
Need help with Applescript? Just copy the code into a new Script Editor document and hit the Run (green right arrow) button. It will open the Address Book and start looking through your contacts, finding ones with addresses, and setting the country code to what you say it should be in the property CountryCode list.
If it fails with any other errors, check the Event Log History window which may give you a clue as to what was wrong with the address it failed on. You may be able to fix the address so it continues. Otherwise, post back with the error and I may be able to figure it out.

How to change default Date format in BO 6.5 SP4

A problem with date display has been reported to me by one of our users - in BO 6.5 - since installing SP4.
The default date format is now MM/DD/YYYY
I have tried to recreate this on my PC and have been able to confirm that this is the case.
Most of our PC's will have two versions of Business Objects on them - for 5.1.6 and for 6.5 - that is the case for my PC.
If I create a new BO document based on a spreadsheet with three entries in the spreadsheet as follows:-
20/01/2009 20-Jan-2009 20th January 2009
This displays in BO 6.5 as
1/20/2009 1/20/2009 20th January 2009
My PC regional setting is UK and the time displays DD/MM/YYYY
Can you advise how to correct this problem please.

Hi Sebastien
Thank you for your response.
I haven't checked Dimension in universe because this is happening even when datasource is an Excel spreadheet - as per details in previous post.
I have looked for *.sbo files and found one for ODBC.sbo in the Version 5 folders on PC - with date format details in it which I've changed - that doesn't make any difference.
Any other ideas?
Regards
Linda

My apple id is not working on icloud because it is not in email address format. how can i change my apple id to email format so icloud can work?

Hello - I just purchased an iPhone 4s and would like to use iCloud but my apple id is not in email address format so when i try to sign into iCloud it won't let me use my apple id. i tried to change my apple id through my account settings but could not find a way to do that. i found ways to change everything else in my settings but when i pushed on the edit button to change my apple id the page didn't change. Not sure how i can get to use iCloud? Please help.

You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.

How can I tell that a default numeric format has been applied to a numeric limit step?

I am working on generating custom HTML code for our test systems in order to reduce the 'footprint' of the standard HTML entries for numeric limits, multiple-numeric limit steps etc....
For a Numeric Limit step, I can set the Numeric Format via the 'Limits' tab and select the pulldown arrow to select any format. Does TestStand actually save this information with the step so I could possibly use this later? I ask this because my modifications are within the 'ModifyReportEntry' Callback. When I am modifying the code to generate new HTML within this callback, I have no idea if the developer has selected a Numeric Format for a given step OR simply left it as DEFAULT.
To make matters more confusing, here is some more information....
When I pause the execution in the callback I notice the following:
Case 1: User has selected a Numeric Format ( this example I will say 3 digits of precision ) %.3f. for a numeric limit step.
Parameters.Result.Limits.Low = 10.000
Parameters.Result.Limits.High = 20.000
Parameters.Result.Numeric = 15.657
Notice the numeric data is ALREADY formatted! Great, I can simply use this to generate my custom HTML table for the numeric limit step.
Case 2 : User has left the numeric format to <Default> for the step.
Parameters.Result.Limits.Low = 10
Paramters.Result.Limits.High = 20
Parameters.Result.Numeric = 15.65713515155
Numeric data is NOT formatted. I know that TestStand will apply the Default Numeric Format that is configured in the report options when it writes the report but since I am doing a custom report I am stuck.
My question is how can I possibly tell that the data has already been formatted by TestStand in the ModifyReportEntry callback? Is there some flag that I could check or anything?
I do notice that the Parameters.ReportEntry string contains TestStand's default HTML code for the step and this is already properly formatted.. so as a possible workaround I could 'pick out' the data from this string but this is slow and time consuming.
Thanks
PH

PH,
You can find out if the numeric format has changed using the TestStand API. I use the following statement in my step's post-expression to find out the numeric format that TestStand uses for the step.
Step.Limits.Low.NumericFormat
If the string returned is an empty string, then it is the default format, otherwise, it's the one specified in the string.
Hope this helps.
Raj
National Instruments
Applications Engineer

How to update the default date format in OBIEE 11G.

Hi All,
How to change the default date format in OBIEE 11g from the MM/DD to DD/MM. Could anyone please help me out ASAP?
Thanks,
Arpan

Hi Arpan
OBIEE 11g is having " localedefinitions.xml " file at this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display
in my case i installed at C:\Oracle\MIddleware.
so
1- Stop BI Server from EM
2- Navigate to this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display. in your case oracle home will be different
3- take a backup of this file localedefinitions.xml "
4- modify it and save
5- bring BI Server up.
Regards
sher

Bridge CC default TIFF format

Hi. I originally posted this under CC, but it was suggested this forum would be more suitable.
I use Image Processor to batch convert JPEGs to TIFFs before further work. I'm on Mac, and the default TIFF format uses Mac byte order. However, other departments at my place of work require IBM PC byter order for TIFFs.
Is there any way to change Bridge / Photoshop Image Processor default to IBM PC byte order for batch operations. I can obviously use a Photoshop Action and Batch it, but Image Processor is a little more straightforward and simple, and would be the ideal method.
K@

Image Processor Pro (available at http://russellbrown.com/scripts.html) does everything Image Processor does and a lot more, including specifying byte order for TIFFs.

How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8 Address Book 5.0.3 (883) Preferences set at ... General First name following Last name Sort for Last name Address Format Canada Font size Large Phone format set a

How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

How to setup the From header in fullname and email address format

when I sent mail from the messaging express , the mail that I sent cannot show the sender in the fullname and email address format. I use webmail and other mail client . It show only email address. I don't know how to setup this . I use the SUN JES messaging server 6.0 SP1 .

exactly so.
in general, for any configutil setting:
0=off=no
1=yes=on

How do I change the default file format for saving files in Preview

I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
TIA,
Thad

I should have been a little clearer...
If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

Standard US Address format in Smart forms

Hi All,
Can any one please tell me how can we achieve standard US Address format while displaying Address.
Thanking you in advance.
Ragards,
Bhanu.R

Command ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in parameter COUNTRY. the reference fields are described in structure ADRC
Syntax
/: ADDRESS
write ur address between this commands
/: ENDADRRESS

ESS Who is Who default address

Dear Guru's
For our customer we are looking for an option to view a default address subtype in the output from Who is Who. I have two questions:
1. We use our own infoset with infotype 0006 for addresses. Our customer however uses multiple subtypes in infotype 0006. They want to show a certain subtype default in the output results without selecting this subtype using the advanced search option.
Is this possbile?
2.Also using our own infoset. The outputresults in the Iview don't seem to match with the records in te backend. For example:
infotype 0006 consist two records:
record 1:
P0006-BEGDA= 01.01.2011
P0006 - ENDDA = 31.12.9999
P0006-ANSSA = 1 Permanent residence
P0006-STRAS = x
P0006-HSNMR = x
P0006-PSTLZ= x
P0006-ORT01 = x
record 2:
P0006-BEGDA= 01.01.2011
P0006 - ENDDA = 31.12.9999
P0006-ANSSA = 6 nursing address
P0006-STRAS = y
P0006-HSNMR = y
P0006-PSTLZ= y
P0006-ORT01 = y
The output in the Iview using the infoset and filling P0006-ANSSA in the advanced search option with 1 shows for example
P0006-ANSSA = 1 Permanent address (record 1)
P0006-STRAS = y (record 2)
P0006-HSNMR = x (record 1)
P0006-PSTLZ= x (record 1)
P0006-ORT01 = y (record 2)
Is this a problem with FM BAPI_EMPLOYEE_GETDATA ?
Help needed.

have you made your custom infoset and a query and select those fields which you need to be shown?
Note that
We can only restrict with the query which is based on the infoset.
In the case of who is who, the query is designed based on selection of
selection fields, output fields & output field list.
We can create infoset query based on subtype field of IT 6 but we cannot
restrict it to subtype.
I suggest that you use BAPI method for creating search for Who's Who .
You may need to write your own BAPI.

Default Address format

Similar Messages

Maybe you are looking for