Default IIS site does not exist

Hi,
I had unistalled epmm 11.1.2.2 and installed it again. Now as i am configuring it is throwing me an error saying "Default IIS site does not exist". I checked "inetmgr". In that I found that under site there are no websites present. I dont know but the site was present before and suddenly it has gone. I tried adding the website but I am unable to do it. Any suggestion guys coz i am really stuck here for 2 days.
Thanks in advance.
Edited by: 944013 on Jul 11, 2012 1:18 AM

Hi,
Please create the default website in IIS7 by following the process given below
1. Log on to the Web server computer as an administrator.
2. Click Start, point to Settings, and then click Control Panel.
3. Double-click Administrative Tools, and then double-click Internet Services Manager.
4. Right-click the Web site that you want to configure in the left pane, and then click Properties.
5. Click the Web site tab.
6. Type a description for the Web site in the Description box.
7. Type the Internet Protocol (IP) address to use for the Web site or leave the All (Unassigned) default setting.
8. Modify the Transmission Control Protocol (TCP) port as appropriate.
9. Click the Home Directory tab.
10. To use a folder on the local computer, click A directory on this computer, and then click Browse to locate the folder that you want to use.
11. To use a folder that has been shared from another computer on the network, click A share located on another computer, and then either type the network path or click Browse to select the shared folder.
12. Click Read to grant read access to the folder (required).
13. Click OK to accept the Web site properties.
Source: Microsoft
The above process will help in creating default website in IIS and then please proceed with the hyperion epm 11.1.2.2 configuration.
Thanks,
Mohammed

Similar Messages

Mysite Error - The site does not contain a default keywords termstore

I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.

Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

File does not exist on remote site, yet it does

I have been trying to understand how Dreamweaver handles remote files in CS5.
My server is setup as a remote server and a test server.
I open the remote file, it offers to get dependencies, so I click yes.
I click on Live view, then it tries to show me the following url
http://my_site.com/public_html/path/to/my/file/file.php
It should not put public_html in the path, and I did not specify this in my site setup. My root setting is /.
Anyway, If I change the url manually, then it shows correctly. Then it offers to discover dunamically linked files, which I agree to.
Now it tells me that 'Dynamically-related files could not be resolved because the site definition is not correct for this server'
If I try to open one of the files that it has discovered, I am told that it is not on the disk, so would I like to 'get it', so I agree.
Finally, I am told that 'Get operation failed since linked-file.php does not exist on remote site'
I suspect that this is all to do with my site definition, but I fiddled with the settings and can't resolve this. I think that the whole problem goes back to Dreamweaver's insistance on putting public_html in the path, but I can't stop it doing so.
Any suggestions?
Thanks
ian

Hi,
Well, yes I did manage to fix the dynamically linked resources issue. As mentioned above, I did need to mention public_html in my Root Directory setting in server setup (silly of me).
I had tried this at first, but it didn't work, as I had the server set as a test server and not a remote server, anyway, i now have it set as both and all is well.
Except that, the first issue that mentioned is still with me: namely, dreamweaver mentions the public_html in the url path when on live view, which is not correct and I don't know where it is inferring this from. I can change it manually, but this doesn't seem right to me. Am I still missing a setting?
In anwer to the questions:
1) My setting (now) in the Root Directory setting in DW is: /public_html/
2) My actual path on the server (that i mention in php scripts) is: /home/login_name/public_html//path/to/my/file/file.php
[In the advanced settings of DW site setup on the Local Info page I have set Links relative to Document option, although it does not seem to make a difference when I change it to Site Root.]
Any suggestions appreciated.
Thanks
Ian

SocialListNotFound : The Social list does not exist in your personal site.

In SharePoint 2013; when a person try to follow a document which is located the SkyDrive Pro of another person it pop up erros message shows as below.
Something went wrong
Sorry, we couldn't follow the document.
TECHNICAL DETAILS
SocialListNotFound : The Social list does not exist in your personal site.
Can anyone help on this...

Hello all,
I have the exact same issue.
When a user tries to follow some document or site, the same error occurs. When I look at the personal site of the user, the "Social" list is missing.
When I have another user do the same thing, it works! The Social list for that user is there.
The difference between the 2 users:
The user where the issue occurs => mysite has been upgraded from SharePoint 2010
The user where the issue doesn't occur => mysite has been created after the upgrade to SharePoint 2013.
So, I tried to delete the mysite of the user who had the issue and let him recreate it by visiting the MySite host and now it works!
The thing is... I have 100 users having the same issue and a lot of them are actually using their mysite, so deleting those mysites is not really an option.
I have 2 questions:
1. why is that "Social" list not created when mysites are upgraded from SharePoint 2010?
2. Can I trigger some process which fixes this for existing sites?
Thanks,
Bart

Error - The site does not contain a default keywords termstore

Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?

Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu

Report painter - Default set 010100010001-1 does not exist

Dear Experts,
I have created a report in report painter and I transported (report, report group, variables) thru transport request. while importing into Quality system i was getting errror"Library 1VK: Default set 010100010001-1 does not exist". Then i kept 1 VK library in transport then i moved to Quality system now all standard report are not working properly.
Please advise.
Thanks
Balu

Hi Thanks for your reply
Earlier i was getting the following error when i was importing transpor request (report, report group, variables)
1)"Library 1VK: Default set 010100010001-1 does not exist. "
2)Errors occurred during post-handling G_RW_AFTER_IMPORT for GRW_JOB T
3)The errors affect the following componenets:
4)FI-SL-IS (Information System)
Then I transported 1VK library also (without selection list option) now my standard reports are not working properly
Please advise.
Thanks
Balu

Copy web site ~/directory does not exist

I have used VS Express 2010 for many years and have successfully copied files to our server. All of a sudden, I am getting the error "The ~/ directory does not exist" on the server side of the website copy screen. I contacted ISP and they say all
looks good, but can't copy files to server. I upgraded to VS Express 2013 and am having the same problem.
Is there a fix for this problem? ISP says it is something in my environment (Windows 7).

Hi mhrrcweb,
From the error message, I think that the Joel's suggestions are really help you, if possible, I suggest you can try Joel's suggestions check your issue in you side.
In addition, since the forum is to discuss the VS IDE issue, however, the issue seems that it is related to the ftp publish. So if the Joel's suggestions still could not help you, I suggest you can ask the issue directly to IIS forum:http://forums.iis.net/ ,
it will be better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Default Target Main Build does not exist in this project

I am learning ant with eclipse and wanted to use ant build.xml to compile and run my class. I was getting the following error when i just tried to use ant.
Default Target Main Build does not exist in this project
package src;
public class Ch05_02 {
public static void main(String[] args) {
System.out.println("This code was built using Ant.");
<?xml version="1.0" encoding = "UTF-8"?>
<project name="Ch05_02" default="Main Build" basedir=".">
</project>Ref: http://www.javabeginner.com/Ch05_02.zip
Edited by: hemanthjava on Oct 28, 2007 5:43 AM

You gave a default target in the build.xml, and then didn't define the target.
This is an Ant question. You're better off asking Ant questions on an Ant forum.

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

OIM 11g - Default role does not exists

Hey,
the default role IDENTITY ORGANIZATION ADMINISTRATORS does not exists in my OIM (11.1.1.5.4)
I need this role to assign an user privileges to create and manage organization.
Any idea?

960944 wrote:
Hey,
the default role IDENTITY ORGANIZATION ADMINISTRATORS does not exists in my OIM (11.1.1.5.4)
I need this role to assign an user privileges to create and manage organization.
Any idea?The following roles were removed in 11.1.1.5.0:
IDENTITY ORGANIZATION ADMINISTRATORS
ACCESS POLICY ADMINISTRATORS
IT RESOURCE ADMINISTRATORS
GENERIC CONNECTOR ADMINISTRATORS
REPORT ADMINISTRATORS
Regards,
Vladimir

Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist

Hi all,
We are trying to implement HR renewal.After installation we got the landing page for ESS and MSS. But when trying to expand chips I am getting below error message
'Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist' in the /iwfnd/error_log transaction.
The chips are are still blank.What could be the issue? Any one has an idea?
Regards,
Jay

Hello,
Are you using a Gateway Hub deployment? Check the setting in the "Assign SAP system Aliases to ODATA Services", and see if the services catalog service to the hub server which has LOCAL as alias and checked the default value.
If so deactivate Default System fiag then test again.
You can check this in SPRO:
Regards,
David

MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file. SQLIService100 - event id 274

window 2008 R2 server ---- after installing SQL 2008 R2 then applying sp2 / sp3 I noted a warning -
Note this server had SQL 2008 R2 uninstalled previously.
MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file.
SQLIService100 - source
event id- 274
user - N/A
Task category - service control.
Do we need to fix something and how do we fix this warning event?
dsk

You could search online for this warning. I was able to find http://superuser.com/questions/346264/event-log-warning-registry-setting-specifying-configuration-file-does-not-exist
where the fix is "in your registry, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTS\ServiceConfigFile
or
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ServiceConfigFile
if value is empty then add in:
C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml"
Arthur
MyBlog
Twitter

SSL client default does not exist

Hi,
I had newly installed XI system on one of our server.
when i am creating RFC destination INTEGRATION_DIRECTORY_HMI, i am getting the following error on logon /security tab.
"<b>SSL client default does not exist"</b>
and it is not even permitting to go furthur!
any suggestions will be appreciated highly.
Thanks,
Ravi

Hi Ravi
Check if your SSL provider is running.
Go to visual admin--instanceservernodeservices----SSL provider.Start the SSL service and check for the configuration.
Follow the same steps for the dispatcher node.
Go to visual admin--instancedispatchernodeservices----SSL provider

Problem creating new sites. The formula refers to a column that does not exist

Good morning,
I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist. Check the formula for spelling mistakes or change the non-existing column to an existing column].
I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
Anybody knows how to find my problematic column?
The error is:
Feature Activation: Threw an exception, attempting to roll back. Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7'). Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
bstrUrl, String bstrListName, String bstrXML) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
Thanks in advance

Hi Enrique,
According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
site template.
Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
please go through all the Calculated column in that content type to see if the formulas all work well.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

"List does not exist" error in a sub-site (ListViewWebPart )

Hi all,
I have a site collection, with several lists/libraries in the root site. I wanted to display the list in sub-sites, using the List View Tool / Save webpart (in SharePoint designer) to save the
XsltListViewWebPart to the site gallery and adding it to publishing pages in my sub-site. Sometimes it works fine, but sometime I get the error: "List does not exist. The page you selected contains a list that does not exist. It may have been deleted
by another user."
When I refresh the page (F5), the error disappears and the page displays well. It seems that only contributors to the list/library have the issue.
Any workaround?
Thanks in advance.

Hello,
The error occurs only for users who have "Contribute" access to the lists. Sometimes everything is working well and sometimes the error occurs (not always) and a simple refresh of the page make
it disappear. There is no specific permissions on lists items: contributors have rights on the whole list.
Another point: this error occurs only on “Publishing pages”, not on “site pages”. I assume then that it is linked with the publishing feature.
Hope this clarifies?
Regards,
Cpo

Default IIS site does not exist

Similar Messages

Maybe you are looking for