Default Relationships in Org Management
Hello All...
I am having a big issue with the defaults of Org Management relationships. For some reason, our installation does NOT allow me to automatically create positions dependent on other positions...like 'is supervised by' relationship between positions. I have tried creating manually, and have checked the IMG for 'allowed relationships' and it shows that a position to position relationship of 'is supervisor of' is available. Any and all help much appreciated...I can't figure out how to automatically do this.
Thanks,
Hope
Hope,
In the ECC6 system I am working with at the moment, it doesn't work that way either. In PPOME I can create a new position from an Org Unit, but not from another position.
Must admit, I have never tried to do that in this or older releases before though. We tend to mostly use Chief positions, so any new positions are just created in the Org Unit and automatically report to the Chief.
I did notice that if I created a new position in PPOME then added the "Reports To" relationship manually (via Go To > Detail object > Enhanced object description), any copies of the positon that I subsequently made in PPOME also got the same "Reports To" relationship created automatically.
Regards,
John
Similar Messages
-
How we will create relationship with org unit and task catalog
HI Experts
How we can create relationship between Org unit and Task Catalog in Organisation management once we grouped all the tasks in one group.
For Example we have one org unit under that we have 3 depts those will consider as org units only.under 3 depts we have professor,Lecturer,Reader as jobs and positions also.If we create Professor tasks in task catalog which all the tasks will be assigned to positions as well.
If it is Org unit and Task catalog how we can create relationship.
Thanks
RajjiHi,
Please try.
DATA: lt_hrp1001 TYPE STANDARD TABLE OF P1001.
DATA: lw_hrp1001 TYPE p1001.
lw_hrp1001-mandt = sy-mandt.
lw_hrp1001-plvar = parent_pos-plvar.
lw_hrp1001-otype = parent_pos-otype.
lw_hrp1001-objid = other_pos.
lw_hrp1001-istat = parent_pos-istat.
lw_hrp1001-begda = sy-datum.
lw_hrp1001-endda = lc_endda.
lw_hrp1001-infty = '1001'.
lw_hrp1001-aedtm = sy-datum.
lw_hrp1001-uname = sy-uname.
lw_hrp1001-rsign = codes.
lw_hrp1001-relat = relats.
lw_hrp1001-sclas = lc_sclas.
lw_hrp1001-sobid = cord_pos.
append lw_hrp1001 to lt_hrp1001.
CALL FUNCTION 'RH_INSERT_INFTY'
EXPORTING
fcode = 'INSE'
vtask = 'S'
commit_flg = 'X'
TABLES
innnn = lt_hrp1001
EXCEPTIONS
no_authorization = 1
error_during_insert = 2
repid_form_initial = 3
corr_exit = 4
begda_greater_endda = 5
OTHERS = 6.
Hope this helps.
regards,
Xiang Li -
Relation ships in Org management
Hi Every one,
My first question is regarding maintaing org management relation ships .How we maintain relation ships between persons(s) in development system coz there will be no data available in development system.????
My second question is ,For example I created org unit A ,Org Unit B ,i assigned a position sr clerk to org unit A and sr Clerk to Org unit B. .Now my question is position in org unit B should reports to position in org unit A..and .how their relation ships are maintained????Hi,
1. I think u got the solution for the first one from amit,
2. This can be done using expert mode.kindly do the senario which u told and create relationship as u told which is possible here.
kindly check out and let me know if u have any concern.
Asha -
Dear All,
I'm asked to study on Structural Org Management, because soon I'll have to work on the same. As I have no clue what it is all about, can somebody help me with relevant document.
Thanks in advance
Regards,
Taranhi,
to start with structure org management is simply mapping the organization chart on to the System
like what are the various departments , positions, and who occupies the positions etc.
like these objects have a relationships with other objects like person holds aposition etc.
it is fairly simple.
just as others have said just go to the interfaces and try
regards
nalla -
Pa custom infptype and org management infotype creation
hi experts,
pa custom infptype and org management infotype creation
steps are same or not.
If any difference b/w both plz give me step by step procedure.
Regards,
SandeepPA infotype will create in PM01 everything we need fill from PM01.
OM infotype
:- 1. we need to create HRI9XXX structure.
2. PPCJ t-code u can create from this t-code.
PA INFOTYPE CREATION
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the `Employee Infotype' radio button.
4) Select the `PS Structure Infotype'.
5) Click on Create. A separate table maintenance window appears.
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on `All' push button. It takes a few moments.
10) Click on `Technical Characteristics' . Infotype list screen appears
11) Click on `Change'(pencil) button
12) Select your Infotype and click on `Detail' (magnifying glass) button
13) Give `T591A' as subtype table
14) Give `T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on `Infotype Characteristics' . Infotype list screen appears
18) Click on `Change' (pencil) button
19) Click on `New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement.
25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select `Layout Editor' and click `Change'.
27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
28) Save and activate. (Don't forget to `Activate at every level)
Edited by: sapabap229 on Aug 30, 2010 11:19 AM -
Org Management programing Material
Hi,
Can any one pls send me the document on reporting in Org Management.
Thankyou.Hi
see the sample code using Orgn management infotypes like HRP1000 etc
report zporgr0040
line-size 108
line-count 60(1)
no standard page heading
message-id zndc.
Database Tables
tables: hrp1001, " HR Master Record (Orgn. Assignment)
pa0002, " Personal Data
t528t, " Position Texts
t527x, " Org Unit Text
t528b, " Positions
csks, " Cost Center
cskt. " Cost Center Texts
Declaration of Internal Tables
Internal Table for Orgn Object Data HRP1000
data: begin of obj_tab occurs 0,
otype like hrp1000-otype, " Object Type
objid like hrp1000-objid, " Object ID
plvar like hrp1000-plvar, " Plan Version
istat like hrp1000-istat, " Planning Status
begda like hrp1000-begda, " Begin date
endda like hrp1000-endda, " End date
end of obj_tab.
Internal Table for Active Employees data PA0000
data: begin of stat_tab occurs 0,
pernr like pa0000-pernr, " Object Type
begda like pa0000-begda, " Begin date
endda like pa0000-endda, " End date
stat2 like pa0000-stat2, " Employment Status
end of stat_tab.
Internal Table for Actual Orgn Assignment Data PA0001
data: begin of act_tab occurs 0,
pernr like pa0001-pernr, " Object Type
begda like pa0001-begda, " Begin date
endda like pa0001-endda, " End date
kostl like pa0001-kostl, " Cost Center
orgeh like pa0001-orgeh, " Org Unit
plans like pa0001-plans, " Position
natio like pa0002-natio, " Nationality
end of act_tab.
Internal Table for Orgn Data HRP1001
data: begin of org_tab occurs 0,
otype like hrp1001-otype, " Object Type
objid like hrp1001-objid, " Object ID
plvar like hrp1001-plvar, " Plan Version
istat like hrp1001-istat, " Planning Status
begda like hrp1001-begda, " Begin date
endda like hrp1001-endda, " End date
subty like hrp1001-subty, " Sub Type
sclas like hrp1001-sclas, " Type of Related Object
sobid like hrp1001-sobid, " Id of Related Object
kostl like pa0001-kostl, " Cost Center
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of org_tab.
Internal Table for Position Calculations
data: begin of org1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
objid like hrp1001-objid, " Object ID
end of org1_tab.
Internal Table for Position Calculations
data: begin of org2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count type i, " No of Positions
end of org2_tab.
Internal Table for Actual Manpower Calculations
data: begin of act1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
plans like pa0001-plans, " Position
end of act1_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act2_tab.
Internal Table for Actual Manpower Calculations(Others)
data: begin of act3_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act3_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act4_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count1 type i, " No of Positions(UAE)
end of act4_tab.
Internal Table for Actual Manpower Calculations(OTHERS)
data: begin of act5_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count2 type i, " No of Positions(Others)
end of act5_tab.
Internal Table for Vaccancies Data
data: begin of vac_tab occurs 0,
plvar like hrp1007-plvar, " Plan Version
otype like hrp1007-otype, " Object Type
objid like hrp1007-objid, " Object ID
istat like hrp1007-istat, " Planning Status
begda like hrp1007-begda, " Begin date
endda like hrp1007-endda, " End date
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
end of vac_tab.
Internal Table to store the Report Output data
data : begin of rep_tab occurs 0 ,
kostl(10) type n, " Cost Cente
plans like pa0001-plans, " Position
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of rep_tab.
Internal Table to store the Report Output data
data : begin of rep1_tab occurs 0 ,
kostl(10) type n, " Cost Cente
cnt type i, " No of Vacancies
end of rep1_tab.
Internal Table to store the Report Output data
data : begin of rep2_tab occurs 0 ,
kostl(10) type n, " Cost Cente
app_no type i, " Approved
nat_no type i, " National
exp_no type i, " Expatriate
tot_no type i, " Total
vac_no type i, " Vacancies
end of rep2_tab.
Declaration of Variables
data: v_sobid like hrp1001-sobid, " Object Id
v_sobid1 like hrp1001-sobid, " Object Id
v_sobid2 like hrp1001-sobid, " Object Id
v_sclas like hrp1001-sclas, " Related Obj Type
v_subty like hrp1001-subty, " Related Object Id
v_otype like hrp1007-otype, " Object Type
v_str(9) type c, " Text
v_str1(10) type c, " Text
v_cnt like sy-tabix. " Table Index
Declaration of Constants
constants : c_x type c value 'X', " Flag
c_stat1 like pa0000-stat2 value '3', " Emp Status
c_plan like hrp1001-plvar value '01', " Plan Version
c_name like hrp1000-uname value 'SAP', " Uname
c_uae like pa0002-natio value 'AE', " Country
c_type like hrp1007-otype value 'O', " Object Type
c_otype like hrp1007-otype value 'S', " Object Type
c_stat like hrp1007-status value '0', " Status
c_pstat like hrp1007-istat value '1', " Plang Status
c_sclas like hrp1001-sclas value 'K', " Rel. Obj Type
c_subty like hrp1001-subty value 'A002', " Related ObjId
c_subty2 like hrp1001-subty value 'A003', " Related ObjId
c_sclas1 like hrp1001-sclas value 'O', " Rel.Obj Type
c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
c_kokrs like coej-kokrs value '1000'. " Controlling Area
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameters :
p_date like pa0001-begda obligatory default sy-datum. " Date
select-options :
s_kostl for csks-kostl, " Cost Center
s_plans for t528b-plans. " Position ID
selection-screen end of block b1.
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Get the Orgn data from database Table HRP1001
perform get_org_data.
Get the Actual Manpower from PA0001
perform get_act_data.
Get the Vaccancies data from database Table HRP1007
perform get_vac_data.
Append the data into final Internal Table
perform append_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(108) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*& Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Position ID
clear t528b.
if not s_plans[] is initial.
select single plans
into t528b-plans
from t528b
where plans in s_plans.
if sy-subrc <> 0.
message e999 with 'Invalid Position ID'(009).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select single kostl
into csks-kostl
from csks
where kostl in s_kostl.
if sy-subrc <> 0.
message e999 with 'Invalid Cost Center'(008).
endif.
endif.
endform. "validate_screen
*& Form get_org_data
Get the Orgn Data from Database Table HRP1001
form get_org_data.
v_str = 'Developee'(002).
v_str1 = 'Deployment'(003).
Select All the Positions from HRP1000
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
into table obj_tab
from hrp1000
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
objid in s_plans and
uname ne c_name.
sort obj_tab by otype objid.
Get the Orgn and Cost Center for all the above Positions
if not obj_tab[] is initial.
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
subty " Sub Type
sclas " Type of Related Object
sobid " Id of Related Object
into table org_tab
from hrp1001
for all entries in obj_tab
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq c_sclas1 and
subty eq c_subty2 and
objid eq obj_tab-objid.
endif.
sort org_tab by otype objid.
Get the Cost Center
loop at org_tab.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
org_tab-kostl = hrp1001-sobid+0(10).
else.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
else.
v_otype = c_otype. " S
v_sclas = c_otype. " S
v_subty = c_subty. " A002
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
endif.
endif.
Get the Position Text
clear t528t.
select single plstx from t528t into t528t-plstx
where sprsl = sy-langu and
otype = c_otype and
plans = org_tab-objid.
org_tab-plstx = t528t-plstx.
Get the Org Unit Text
clear t527x.
select single orgtx from t527x into t527x-orgtx
where sprsl = sy-langu and
orgeh = org_tab-sobid+0(8).
org_tab-orgtx = t527x-orgtx.
modify org_tab index sy-tabix.
clear v_sobid.
endloop.
sort org_tab by otype objid.
Calculate the Approved No of Positions
loop at org_tab.
if org_tab-kostl in s_kostl.
move-corresponding org_tab to org1_tab.
append org1_tab.
clear org1_tab.
endif.
endloop.
sort org1_tab by kostl objid.
clear v_cnt.
loop at org1_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
org2_tab-kostl = org1_tab-kostl.
org2_tab-count = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append org2_tab.
clear:org2_tab.
endat.
endloop.
sort org2_tab by kostl.
endform. "get_org_data
*& Form get_act_data
Get the Actual Manpower Data from Database Table PA0001
form get_act_data.
clear : stat_tab, act_tab.
refresh: stat_tab, act_tab.
Get all the Active Employees
select pernr " Object Type
begda " Begin date
endda " End date
stat2 " Emp Status
into table stat_tab
from pa0000
where stat2 eq c_stat1 and
begda le p_date and
endda ge p_date.
sort act_tab by pernr.
if not stat_tab[] is initial.
select pernr " Object Type
begda " Begin date
endda " End date
kostl " Cost Center
orgeh " Org Unit
plans " Position
into table act_tab
from pa0001
for all entries in stat_tab
where pernr eq stat_tab-pernr and
kostl in s_kostl and
plans in s_plans and
persg eq '1' and
begda le p_date and
endda ge p_date.
endif.
sort act_tab by pernr.
loop at act_tab.
move-corresponding act_tab to act1_tab.
clear pa0002-natio.
select single natio into pa0002-natio from pa0002
where pernr = act_tab-pernr.
if sy-subrc = 0.
act1_tab-natio = pa0002-natio.
endif.
append act1_tab.
clear act1_tab.
endloop.
sort act1_tab by kostl natio.
Calculate the Local and Expatriate Manpower
loop at act1_tab.
if act1_tab-natio = c_uae.
act2_tab-kostl = act1_tab-kostl.
act2_tab-natio = act1_tab-natio.
else.
act3_tab-kostl = act1_tab-kostl.
act3_tab-natio = act1_tab-natio.
endif.
append: act2_tab, act3_tab.
clear : act2_tab,act3_tab.
endloop.
sort act2_tab by kostl.
sort act3_tab by kostl.
Actual UAE Manpower
clear v_cnt.
loop at act2_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act4_tab-kostl = act2_tab-kostl.
act4_tab-count1 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act4_tab.
clear:act4_tab.
endat.
endloop.
sort act4_tab by kostl.
Other Countries
clear v_cnt.
loop at act3_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act5_tab-kostl = act3_tab-kostl.
act5_tab-count2 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act5_tab.
clear:act5_tab.
endat.
endloop.
sort act5_tab by kostl.
endform. "get_act_data
*& Form get_org
Get the Cost Center from Parent Org Id
form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
clear hrp1001.
select single * from hrp1001
where otype = p_v_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq p_v_sclas and
subty eq p_v_subty and
objid eq p_v_sobid.
v_sobid = hrp1001-sobid+0(8).
endform. " get_org
*& Form get_vac_data
Get the Vaccancies Data from Database Table HRP1007
form get_vac_data.
if not org_tab[] is initial.
select plvar " Plan Version
otype " Object Type
objid " Object ID
istat " Planning Status
begda " Begin date
endda " End date
vacan " Vacancy Indicator
status " Status of Vacancy
into table vac_tab
from hrp1007
for all entries in org_tab
where plvar = c_plan and
otype = c_otype and
istat eq c_pstat and
objid = org_tab-objid and
begda le p_date and
endda ge p_date and
vacan eq c_x and
status eq c_stat.
endif.
sort vac_tab by plvar otype objid.
Get the HR data into the rep_tab Internal Table
loop at vac_tab.
rep_tab-plans = vac_tab-objid.
rep_tab-vacan = vac_tab-vacan.
rep_tab-status = vac_tab-status.
read table org_tab with key objid = vac_tab-objid.
if sy-subrc = 0.
rep_tab-kostl = org_tab-kostl.
rep_tab-plstx = org_tab-plstx.
rep_tab-orgtx = org_tab-orgtx.
endif.
append rep_tab.
clear rep_tab.
endloop.
loop at rep_tab.
if not rep_tab-kostl in s_kostl.
delete rep_tab index sy-tabix.
endif.
endloop.
sort rep_tab by kostl plans.
delete rep_tab where plstx cs v_str.
delete rep_tab where orgtx cs v_str1.
Calculate the Count of Vacancies in each Division
clear v_cnt.
loop at rep_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
rep1_tab-kostl = rep_tab-kostl.
rep1_tab-cnt = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append rep1_tab.
clear:rep1_tab.
endat.
endloop.
sort rep1_tab by kostl.
endform. "get_vac_data
*& Form append_data
Append the data into final Internal Table
form append_data.
loop at org2_tab.
rep2_tab-kostl = org2_tab-kostl.
rep2_tab-app_no = org2_tab-count.
read table act4_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-nat_no = act4_tab-count1.
endif.
read table act5_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-exp_no = act5_tab-count2.
endif.
read table rep1_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-vac_no = rep1_tab-cnt.
endif.
rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
append rep2_tab.
clear rep2_tab.
endloop.
sort rep2_tab by kostl.
endform. "append_data
*& Form top_of_page
Write the Report and Column Headings
form top_of_page.
skip.
format color col_heading on.
write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
/1(108) 'Summary of Manning Level Report'(011) centered.
format color off.
skip.
write: /2 'Key Date :'(013), p_date,
75 'Report Run Date:'(041), sy-datum.
if not s_kostl[] is initial.
if s_kostl-high is initial.
write: /2 'Cost Center :'(023), s_kostl-low,
75 'Time :'(042), sy-uzeit.
else.
write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
'To'(022), s_kostl-high,
75 'Time :'(042), sy-uzeit.
endif.
else.
write: /75 'Time :'(042), sy-uzeit.
endif.
if not s_plans[] is initial.
if s_plans-high is initial.
write: /2 'Position Id :'(019), s_plans-low,
75 'User :'(043), sy-uname.
else.
write: /2 'Position Id From:'(021), s_plans-low,
'To'(022), s_plans-high,
75 'User :'(043), sy-uname.
endif.
else.
write: /75 'User :'(043), sy-uname.
endif.
write: /75 'Page No :'(044), sy-pagno.
skip.
write /1(108) sy-uline.
format color col_heading.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(32) 'Actual'(018) centered,
97 sy-vline,108 sy-vline.
write:/1 sy-vline, 2(10) 'CostCenter'(014),
12 sy-vline, 13(40) 'Description'(026) centered,
53 sy-vline, 54(10) 'Approved'(025) centered,
64 sy-vline, 65(32) sy-uline,
97 sy-vline, 98(10) 'Vacancies'(017),
108 sy-vline.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(10) 'National'(015) centered,
75 sy-vline, 76(10) 'Expatriate'(020) centered,
86 sy-vline, 87(10) 'Total'(016) centered,
97 sy-vline,108 sy-vline.
format color off.
write /1(108) sy-uline.
endform. "top_of_page
*& Form Display_report
Write the Report Output
form display_report.
if rep2_tab[] is initial.
message i999 with
'No Data found for the entered Selection'(035).
else.
loop at rep2_tab.
Authorization Check for the Orgn and Cost Centers
perform auth_check_org.
if sy-subrc = 0.
clear cskt.
select single ltext into cskt-ltext from cskt
where spras = sy-langu and
kokrs = c_kokrs and
kostl = rep2_tab-kostl.
format color col_normal.
write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
12 sy-vline, 13(40) cskt-ltext,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
at last.
sum.
format color 3.
write /1(108) sy-uline.
write: /1 sy-vline, 2(10) 'Total'(027),
12 sy-vline,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
endat.
endif.
endloop.
endif.
write /1(108) sy-uline.
endform. " Display_report
*& Form auth_check_org
Authorization Check for the Orgn and Cost Center
form auth_check_org.
authority-check object 'ZNDCHROM'
id 'PLVAR' dummy
id 'OTYPE' dummy
id 'KOSTL' field rep2_tab-kostl.
endform. "auth_check_org
Also
Check this link : http://www.sapdevelopment.co.uk/hr/hrhome.htm.
Reward points if found helpful
Cheers,
Chandra Sekhar. -
Hi Experts..
Could you please tell me where we use Org.Management infotypes(IT1000 to1999)
Thanks in advance.OM infotypes are those in which we store all the information regarding all organization attributes, activities etc.. e.g
Position is related to organization so we maintain it in OM infotypes..
in 1000, we maintain its name and long text .. in 1001 we maintain relationship of position with other OM attributes i.e. Org Unit, Job, Business Area etc.
We maintain 1000 and 1001 infotypes for all OM objects...
but other Infotypes may vary depending upon their attributes..
e.g. IT 1007 is maintained for Job.. whether it is vacant or not..
similarly IT 1610 is used for US Job attributes... we can maintain only attributes here not position and others.
Reward if useful
regards
Pradeep -
Sample code for Org Management
Hi,
I am new to Org Management coding in HR ABAP.
Can anybody post some simple sample code for Org. Management so that I can understand the flow of coding..
Thanks and Regards,
RamHi
see the sample code using Orgn management infotypes like HRP1000 etc
report zporgr0040
line-size 108
line-count 60(1)
no standard page heading
message-id zndc.
Database Tables
tables: hrp1001, " HR Master Record (Orgn. Assignment)
pa0002, " Personal Data
t528t, " Position Texts
t527x, " Org Unit Text
t528b, " Positions
csks, " Cost Center
cskt. " Cost Center Texts
Declaration of Internal Tables
Internal Table for Orgn Object Data HRP1000
data: begin of obj_tab occurs 0,
otype like hrp1000-otype, " Object Type
objid like hrp1000-objid, " Object ID
plvar like hrp1000-plvar, " Plan Version
istat like hrp1000-istat, " Planning Status
begda like hrp1000-begda, " Begin date
endda like hrp1000-endda, " End date
end of obj_tab.
Internal Table for Active Employees data PA0000
data: begin of stat_tab occurs 0,
pernr like pa0000-pernr, " Object Type
begda like pa0000-begda, " Begin date
endda like pa0000-endda, " End date
stat2 like pa0000-stat2, " Employment Status
end of stat_tab.
Internal Table for Actual Orgn Assignment Data PA0001
data: begin of act_tab occurs 0,
pernr like pa0001-pernr, " Object Type
begda like pa0001-begda, " Begin date
endda like pa0001-endda, " End date
kostl like pa0001-kostl, " Cost Center
orgeh like pa0001-orgeh, " Org Unit
plans like pa0001-plans, " Position
natio like pa0002-natio, " Nationality
end of act_tab.
Internal Table for Orgn Data HRP1001
data: begin of org_tab occurs 0,
otype like hrp1001-otype, " Object Type
objid like hrp1001-objid, " Object ID
plvar like hrp1001-plvar, " Plan Version
istat like hrp1001-istat, " Planning Status
begda like hrp1001-begda, " Begin date
endda like hrp1001-endda, " End date
subty like hrp1001-subty, " Sub Type
sclas like hrp1001-sclas, " Type of Related Object
sobid like hrp1001-sobid, " Id of Related Object
kostl like pa0001-kostl, " Cost Center
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of org_tab.
Internal Table for Position Calculations
data: begin of org1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
objid like hrp1001-objid, " Object ID
end of org1_tab.
Internal Table for Position Calculations
data: begin of org2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count type i, " No of Positions
end of org2_tab.
Internal Table for Actual Manpower Calculations
data: begin of act1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
plans like pa0001-plans, " Position
end of act1_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act2_tab.
Internal Table for Actual Manpower Calculations(Others)
data: begin of act3_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act3_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act4_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count1 type i, " No of Positions(UAE)
end of act4_tab.
Internal Table for Actual Manpower Calculations(OTHERS)
data: begin of act5_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count2 type i, " No of Positions(Others)
end of act5_tab.
Internal Table for Vaccancies Data
data: begin of vac_tab occurs 0,
plvar like hrp1007-plvar, " Plan Version
otype like hrp1007-otype, " Object Type
objid like hrp1007-objid, " Object ID
istat like hrp1007-istat, " Planning Status
begda like hrp1007-begda, " Begin date
endda like hrp1007-endda, " End date
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
end of vac_tab.
Internal Table to store the Report Output data
data : begin of rep_tab occurs 0 ,
kostl(10) type n, " Cost Cente
plans like pa0001-plans, " Position
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of rep_tab.
Internal Table to store the Report Output data
data : begin of rep1_tab occurs 0 ,
kostl(10) type n, " Cost Cente
cnt type i, " No of Vacancies
end of rep1_tab.
Internal Table to store the Report Output data
data : begin of rep2_tab occurs 0 ,
kostl(10) type n, " Cost Cente
app_no type i, " Approved
nat_no type i, " National
exp_no type i, " Expatriate
tot_no type i, " Total
vac_no type i, " Vacancies
end of rep2_tab.
Declaration of Variables
data: v_sobid like hrp1001-sobid, " Object Id
v_sobid1 like hrp1001-sobid, " Object Id
v_sobid2 like hrp1001-sobid, " Object Id
v_sclas like hrp1001-sclas, " Related Obj Type
v_subty like hrp1001-subty, " Related Object Id
v_otype like hrp1007-otype, " Object Type
v_str(9) type c, " Text
v_str1(10) type c, " Text
v_cnt like sy-tabix. " Table Index
Declaration of Constants
constants : c_x type c value 'X', " Flag
c_stat1 like pa0000-stat2 value '3', " Emp Status
c_plan like hrp1001-plvar value '01', " Plan Version
c_name like hrp1000-uname value 'SAP', " Uname
c_uae like pa0002-natio value 'AE', " Country
c_type like hrp1007-otype value 'O', " Object Type
c_otype like hrp1007-otype value 'S', " Object Type
c_stat like hrp1007-status value '0', " Status
c_pstat like hrp1007-istat value '1', " Plang Status
c_sclas like hrp1001-sclas value 'K', " Rel. Obj Type
c_subty like hrp1001-subty value 'A002', " Related ObjId
c_subty2 like hrp1001-subty value 'A003', " Related ObjId
c_sclas1 like hrp1001-sclas value 'O', " Rel.Obj Type
c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
c_kokrs like coej-kokrs value '1000'. " Controlling Area
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameters :
p_date like pa0001-begda obligatory default sy-datum. " Date
select-options :
s_kostl for csks-kostl, " Cost Center
s_plans for t528b-plans. " Position ID
selection-screen end of block b1.
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Get the Orgn data from database Table HRP1001
perform get_org_data.
Get the Actual Manpower from PA0001
perform get_act_data.
Get the Vaccancies data from database Table HRP1007
perform get_vac_data.
Append the data into final Internal Table
perform append_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(108) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*& Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Position ID
clear t528b.
if not s_plans[] is initial.
select single plans
into t528b-plans
from t528b
where plans in s_plans.
if sy-subrc <> 0.
message e999 with 'Invalid Position ID'(009).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select single kostl
into csks-kostl
from csks
where kostl in s_kostl.
if sy-subrc <> 0.
message e999 with 'Invalid Cost Center'(008).
endif.
endif.
endform. "validate_screen
*& Form get_org_data
Get the Orgn Data from Database Table HRP1001
form get_org_data.
v_str = 'Developee'(002).
v_str1 = 'Deployment'(003).
Select All the Positions from HRP1000
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
into table obj_tab
from hrp1000
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
objid in s_plans and
uname ne c_name.
sort obj_tab by otype objid.
Get the Orgn and Cost Center for all the above Positions
if not obj_tab[] is initial.
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
subty " Sub Type
sclas " Type of Related Object
sobid " Id of Related Object
into table org_tab
from hrp1001
for all entries in obj_tab
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq c_sclas1 and
subty eq c_subty2 and
objid eq obj_tab-objid.
endif.
sort org_tab by otype objid.
Get the Cost Center
loop at org_tab.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
org_tab-kostl = hrp1001-sobid+0(10).
else.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
else.
v_otype = c_otype. " S
v_sclas = c_otype. " S
v_subty = c_subty. " A002
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
endif.
endif.
Get the Position Text
clear t528t.
select single plstx from t528t into t528t-plstx
where sprsl = sy-langu and
otype = c_otype and
plans = org_tab-objid.
org_tab-plstx = t528t-plstx.
Get the Org Unit Text
clear t527x.
select single orgtx from t527x into t527x-orgtx
where sprsl = sy-langu and
orgeh = org_tab-sobid+0(8).
org_tab-orgtx = t527x-orgtx.
modify org_tab index sy-tabix.
clear v_sobid.
endloop.
sort org_tab by otype objid.
Calculate the Approved No of Positions
loop at org_tab.
if org_tab-kostl in s_kostl.
move-corresponding org_tab to org1_tab.
append org1_tab.
clear org1_tab.
endif.
endloop.
sort org1_tab by kostl objid.
clear v_cnt.
loop at org1_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
org2_tab-kostl = org1_tab-kostl.
org2_tab-count = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append org2_tab.
clear:org2_tab.
endat.
endloop.
sort org2_tab by kostl.
endform. "get_org_data
*& Form get_act_data
Get the Actual Manpower Data from Database Table PA0001
form get_act_data.
clear : stat_tab, act_tab.
refresh: stat_tab, act_tab.
Get all the Active Employees
select pernr " Object Type
begda " Begin date
endda " End date
stat2 " Emp Status
into table stat_tab
from pa0000
where stat2 eq c_stat1 and
begda le p_date and
endda ge p_date.
sort act_tab by pernr.
if not stat_tab[] is initial.
select pernr " Object Type
begda " Begin date
endda " End date
kostl " Cost Center
orgeh " Org Unit
plans " Position
into table act_tab
from pa0001
for all entries in stat_tab
where pernr eq stat_tab-pernr and
kostl in s_kostl and
plans in s_plans and
persg eq '1' and
begda le p_date and
endda ge p_date.
endif.
sort act_tab by pernr.
loop at act_tab.
move-corresponding act_tab to act1_tab.
clear pa0002-natio.
select single natio into pa0002-natio from pa0002
where pernr = act_tab-pernr.
if sy-subrc = 0.
act1_tab-natio = pa0002-natio.
endif.
append act1_tab.
clear act1_tab.
endloop.
sort act1_tab by kostl natio.
Calculate the Local and Expatriate Manpower
loop at act1_tab.
if act1_tab-natio = c_uae.
act2_tab-kostl = act1_tab-kostl.
act2_tab-natio = act1_tab-natio.
else.
act3_tab-kostl = act1_tab-kostl.
act3_tab-natio = act1_tab-natio.
endif.
append: act2_tab, act3_tab.
clear : act2_tab,act3_tab.
endloop.
sort act2_tab by kostl.
sort act3_tab by kostl.
Actual UAE Manpower
clear v_cnt.
loop at act2_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act4_tab-kostl = act2_tab-kostl.
act4_tab-count1 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act4_tab.
clear:act4_tab.
endat.
endloop.
sort act4_tab by kostl.
Other Countries
clear v_cnt.
loop at act3_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act5_tab-kostl = act3_tab-kostl.
act5_tab-count2 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act5_tab.
clear:act5_tab.
endat.
endloop.
sort act5_tab by kostl.
endform. "get_act_data
*& Form get_org
Get the Cost Center from Parent Org Id
form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
clear hrp1001.
select single * from hrp1001
where otype = p_v_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq p_v_sclas and
subty eq p_v_subty and
objid eq p_v_sobid.
v_sobid = hrp1001-sobid+0(8).
endform. " get_org
*& Form get_vac_data
Get the Vaccancies Data from Database Table HRP1007
form get_vac_data.
if not org_tab[] is initial.
select plvar " Plan Version
otype " Object Type
objid " Object ID
istat " Planning Status
begda " Begin date
endda " End date
vacan " Vacancy Indicator
status " Status of Vacancy
into table vac_tab
from hrp1007
for all entries in org_tab
where plvar = c_plan and
otype = c_otype and
istat eq c_pstat and
objid = org_tab-objid and
begda le p_date and
endda ge p_date and
vacan eq c_x and
status eq c_stat.
endif.
sort vac_tab by plvar otype objid.
Get the HR data into the rep_tab Internal Table
loop at vac_tab.
rep_tab-plans = vac_tab-objid.
rep_tab-vacan = vac_tab-vacan.
rep_tab-status = vac_tab-status.
read table org_tab with key objid = vac_tab-objid.
if sy-subrc = 0.
rep_tab-kostl = org_tab-kostl.
rep_tab-plstx = org_tab-plstx.
rep_tab-orgtx = org_tab-orgtx.
endif.
append rep_tab.
clear rep_tab.
endloop.
loop at rep_tab.
if not rep_tab-kostl in s_kostl.
delete rep_tab index sy-tabix.
endif.
endloop.
sort rep_tab by kostl plans.
delete rep_tab where plstx cs v_str.
delete rep_tab where orgtx cs v_str1.
Calculate the Count of Vacancies in each Division
clear v_cnt.
loop at rep_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
rep1_tab-kostl = rep_tab-kostl.
rep1_tab-cnt = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append rep1_tab.
clear:rep1_tab.
endat.
endloop.
sort rep1_tab by kostl.
endform. "get_vac_data
*& Form append_data
Append the data into final Internal Table
form append_data.
loop at org2_tab.
rep2_tab-kostl = org2_tab-kostl.
rep2_tab-app_no = org2_tab-count.
read table act4_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-nat_no = act4_tab-count1.
endif.
read table act5_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-exp_no = act5_tab-count2.
endif.
read table rep1_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-vac_no = rep1_tab-cnt.
endif.
rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
append rep2_tab.
clear rep2_tab.
endloop.
sort rep2_tab by kostl.
endform. "append_data
*& Form top_of_page
Write the Report and Column Headings
form top_of_page.
skip.
format color col_heading on.
write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
/1(108) 'Summary of Manning Level Report'(011) centered.
format color off.
skip.
write: /2 'Key Date :'(013), p_date,
75 'Report Run Date:'(041), sy-datum.
if not s_kostl[] is initial.
if s_kostl-high is initial.
write: /2 'Cost Center :'(023), s_kostl-low,
75 'Time :'(042), sy-uzeit.
else.
write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
'To'(022), s_kostl-high,
75 'Time :'(042), sy-uzeit.
endif.
else.
write: /75 'Time :'(042), sy-uzeit.
endif.
if not s_plans[] is initial.
if s_plans-high is initial.
write: /2 'Position Id :'(019), s_plans-low,
75 'User :'(043), sy-uname.
else.
write: /2 'Position Id From:'(021), s_plans-low,
'To'(022), s_plans-high,
75 'User :'(043), sy-uname.
endif.
else.
write: /75 'User :'(043), sy-uname.
endif.
write: /75 'Page No :'(044), sy-pagno.
skip.
write /1(108) sy-uline.
format color col_heading.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(32) 'Actual'(018) centered,
97 sy-vline,108 sy-vline.
write:/1 sy-vline, 2(10) 'CostCenter'(014),
12 sy-vline, 13(40) 'Description'(026) centered,
53 sy-vline, 54(10) 'Approved'(025) centered,
64 sy-vline, 65(32) sy-uline,
97 sy-vline, 98(10) 'Vacancies'(017),
108 sy-vline.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(10) 'National'(015) centered,
75 sy-vline, 76(10) 'Expatriate'(020) centered,
86 sy-vline, 87(10) 'Total'(016) centered,
97 sy-vline,108 sy-vline.
format color off.
write /1(108) sy-uline.
endform. "top_of_page
*& Form Display_report
Write the Report Output
form display_report.
if rep2_tab[] is initial.
message i999 with
'No Data found for the entered Selection'(035).
else.
loop at rep2_tab.
Authorization Check for the Orgn and Cost Centers
perform auth_check_org.
if sy-subrc = 0.
clear cskt.
select single ltext into cskt-ltext from cskt
where spras = sy-langu and
kokrs = c_kokrs and
kostl = rep2_tab-kostl.
format color col_normal.
write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
12 sy-vline, 13(40) cskt-ltext,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
at last.
sum.
format color 3.
write /1(108) sy-uline.
write: /1 sy-vline, 2(10) 'Total'(027),
12 sy-vline,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
endat.
endif.
endloop.
endif.
write /1(108) sy-uline.
endform. " Display_report
*& Form auth_check_org
Authorization Check for the Orgn and Cost Center
form auth_check_org.
authority-check object 'ZNDCHROM'
id 'PLVAR' dummy
id 'OTYPE' dummy
id 'KOSTL' field rep2_tab-kostl.
endform. "auth_check_org
<b>Reward points for useful Answers</b>
Regards
Anji -
Buildng team in org management in hr
hi guys,
could any one help me with the code..org management is new to me...
i have to build teams
for head quaters:Teams are formed by Org Unit ID and Supervisor Position ID.
From the root node, for each position, check if position is a supervisor using table HRP1001 relationship B002.
If its a supervisor, find the corresponding org unit using table HRP1001 relationship A003. Each pair of Org Unit ID (P0001-ORGEH) and Supervisor Position ID (P0001-PLANS) forms a team. Populate each team into Wbt_String field. Except the root team, precede each child team with parent team. Use format parent team~child team.
If its not a supervisor, skip that position and move to the next position.
could u guys help me with the logic and code...
thanx in advance..i got the answer.. use position hierarchy... if u want can use evaluation path too
-
Migrating HR Org Management data.... any help files etc.
Hi,
I am familiar with migrating HR master data, payroll data, NI data, i.e. infotypes etc.
I would like to know if anyone can give me a heads up on migrating Org management data, and positions data. Is there any abap involvement for this or is it purely a functional issue?
What are main transactions for this? Can it be done with lsmw? Is there a standard procedure for migrating org mgt data?
Any advice and assistance greatly appreciated.
Thank you.I am using tcode PP02 and then entering values for
Plan Version,
Object Type,
Object ID,
Infotype,
Subtype,
Planning status, and
Validity.
Once I hit create icon "Create Relationships" screen comes up here I have to enter Type of related object, which I can select from a drop down list. This field is P1001-SCLAS. Which is of 2 characters, but when I see a drop down list its a description which is more than 2 characters. How can I populate values in this field using BDC or Recording. the value I am reading from a file for this field is k or s ... but same field has a drop down list with descriptions but not k or s...., its kind of hard for me to imagin how this field can be populated. When I run a session in SM35 I am getting an error in BDC session as " No batch input data for screen MP100100 2000 ".When I look Converted data in LSMW its k or s ... but not description this is obvious.
Thanks. -
Org managament -Cost Center- Position
Hi Experts,
There is a clarification required, I am creating Jobs,Positions from 01.01.1900 upto 31.12.9999 and the FI consultant has created his Cost centers mentioning the date as 01.04.2009. As se says that I need to mantain the cost center creation dates only 1 year prior to GO-LIVE date.
Now the problem is when I am creating one of the Positions in the Account Assignment tab details and its Cost distribution tab in Org Managment with PPOCE transaction, by assigning the positions relevent Cost Center where he falls to....the system throws and error stating that Cost Center not maintained on 01.01.1900 as it is the matter of that cost centers have been created only from 01.04.2009.
So, now can any of you let me know how myself and FI consultant need to resolve this issue?
Best Regards,
KishoreJ.Hi,
So, I would go ahead and create Jobs & Positions according to Cost Center dates. Can you please clarify me with one thing is
Now If I create the Jobs & Position of the date from which Cost Centers have been created in my case 01.04.2009, will I be able to hire an employee with the created Jobs & Positions with previous date like for example an employee is working with Organization from 01.01.2003 till date as when I do hiringaction, system asks me for joining date, so mentioning his joinning date as 01.01.2003 and maintain all the Org data with Account Assignment, Cost Distribution as per the relevent dates.
Thank You,
KishoreJ. -
Custom Infotype for Org Management
Hi Experts,
I Iam trying to create custom infotype to capture some infomation on an Org Management custom object and I am not sure if I can do this through PM01 because this is neither employee or applicant info but custom object info. Any idea on how to do this?Hi,
For creating OM custom infotype you should start with transaction SE11. PM01 is only for employee and applicant IT.
Go to SE11Create structure Ex:HRI9009 Create all necessary datatypes. (fields for your IT).
Then go to PPCI enter IT name and number. then maintain Table T77I here maintain time constraint for your IT.
If you still have doubts get back to me.
Thanks and Regards,
Shilpa -
Edit Org Management Infotype 1000
Hi All,
Can you suggest me how to edit the Infotype screen of Org Management Infotype 1000.
Requirement is to restrict the Org unit abbrevation without blank spaces.
eg) EAB/AB/TM MR is not allowed. It should be EAB/AB/TMMRHi Veer,
If you are talking about Org unit abbreviation, this can be done in any of the interfaces in Org Mgmt.
For example, you can do it in Simple Maintenance, select the org unit and rename it whether abbreviation or name of the org unit.
Best regards
Ghouse -
CREATION OF JOB IN ORG MANAGEMENT
HI ALL,
IN CRM 5.0 WHEN I M CRETING ORG MANAGEMENT AND ASSIGNING A POSITION THERE IS A FIELD AS JOB IN NBASIC DATA.IF I WANT TO GIVE ANY JOB SHOULD I DEFINE THAT JOB OR SIMPLY I CAN WRITE THAT JOB IN THAT FIELD. IF I WILL CREATE FIRST HOW CAN I DEFINE THAT JOB.
SECOND THING WHEN I MAINTAIN ORG UNIT IN CRM 5.0 AND CREATE SALES OFFICE I GET AN ERROR LIKE Maintain attribute IS_SA_ORG first
HOW CAN I SOLVE THAT MESSAGE.
THANX IN ADVANCE
CHINUHI PRATIK,
THANKS FOR GIVING THE CORRECT ANSWER. I HAVE ASSIGNED THE FULL POINT. I HAVE ANOTHER QUESTION. I M GIVING THE DESCRIPTION OF THIS.
as per my requirement I created a role as Pharmacy by coping Hospital and I assigned the views in BUSD ( dataset,BP View -> Calling Applications,BP View ->Screen Sequences,BP View -> Views). Still when I m going to field grouping in spro,cac and field grouping it is throwing a message as System unable to determine any relevant views. Can any body suggest me where i did wrong.
CAN U SUGGEST THIS. EVEN IF I HAVE POSTED THIS QUESTION ON THIS THREAD.
System unable to determine any relevant views
THANX IN ADVANCE
CHINU -
How to make Default the Higher-Level Manager of the employee
Dear experts,
how to make Default the Higher-Level Manager of the employee as Further Participant in performance management ?
Regards,
TVSHi,
The delivered BAdI below defaults in both the appraiser and appraisee as part-appraisers//Default Further Participants.
BAdI Area: Appraisal Enhancements
BAdI Definition: HRHAP00_DOC_DEF_DO (Appraisal - Default Further Participants)
App. Enhn.: DEFAULT_ALL_MANAGERS
Implementation: HRTMC_DEF_OTHERS
Implementation short text: Determine All Managers
Implement this BADI in SE18/SE19 and write the desired code in the BADI methods
Hope this will help u out.....
Regards
Lakhan
Maybe you are looking for
-
Dump : Runtime Errors DBIF_RSQL_INVALID_RSQL
Hi Experts, I got a dump at the select statement in the production during the excution.The Details of the program are : DATA : BEGIN OF it_ekko OCCURS 0. INCLUDE STRUCTURE ekko. DATA : END OF it_ekko. START-OF-SELECTION. SELECT * FROM ekko
-
Viera App no longer works on Home Hub 4 - please h...
Hi, I have a brand new Panasonic P50VT65 which i previously succesfully used with the Viera App ad remote controlled my TV and used Swipe and Share to get TV on my phone and also, images and video from the phone onto the TV. I put my Home Hub 4 in to
-
Is there a way to get the paperclip icon that then takes you to the dialog box to open, save, etc., attachments to be located in the toolbar? It appears - and disappears - along with some other action buttons - as you scroll over the dividing line
-
How will disabling the java web plug-in affect my computer performance? The flashback trojan horse virus recently infected my laptop. Apple website suggested disabling the plug-in. I was wondering if anyone has attempted this and what were the res
-
CS3 is replacing missing fonts with Myriad
I am opening a file that uses some fonts that are missing. OK, and I get the warning message to that effect. Normally CS3 shows the alert badge on the layer and if the layer is selected & type tool active, it will show you the missing font name in br