Default screen no. reports.

hi experts ,
what is the default screen no. reports. , that u face,
this is from ibm.
kindly give the solution.
regards.
sreenivasulu

hi Bysani ,
The default screen number is 1000 of reports until and unless you call a particular screen with your specified screen number ..
to check this , create a sample report with parameter statement and execute that , in the selection screen check the transaction number , u get it here as 1000.
Reward if you are satisfied !
Regards,
Ranjita

Similar Messages

AT SELECTION-SCREEN stops report

Hello,
I run a report using the AT SELECTION-SCREEN stmt.
Below AT SELECTION-SCREEN is an IF ... ELSE block. Within that block the report checks, whether the user input (made in a SELECT-OPTIONS) complies some requirements.
I check for example, if that what the user types in matches a defined string...
But if i use an AT SELECTION-SCREEN, the report does not continue after execution after that!
It returns to the selction screen...
How can I achieve, that the report continues with execution...?
Thx,
holger

Hi Holger,
1. This is the default behaviour.
2. For report purpose execution,
   the event is
   START-OF-SELECTION ( and not at selection-screen)
3. However u CAN ACHIEVE this by :
   after all validations , use the syntax
   LEAVE TO LIST-PROCESSING.
4. I tried the same at my end,
   its working fine.
5. However, if u use step 3,
   there will be a problem :
   after the execution of report,
it wil get HANG. ie. it won't then
get back using the toolbar buttons.
U may try it for yourself.
6. Bottom line is:
   use
START-OF-SELECTION (FOR FINAL EXECUTION OF THE REPORT)
Regards,
Amit M.
Message was edited by: Amit Mittal

FM to display Selection screen on report output??

Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.

Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!!

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Creating Selection screen in Report Painter

Good day everyone,
Does anyone know how I could create a selection screen in Report Writer? Thanks!
>Christian<

Hi,
Simple Parameters or Selec-options statements will suffice.
Eg : Parameters : p_matnr type mara-matnr.
select-options : s_matnr for mara-matnr.
In selection screen, you may have selec-options, parameters, check boxes, radio buttons etc.
Regards,
Sujatha.

Adding gsber in selection screen of report painter

To gurus,
I have a small requirement, I have to get business area (GSBER) in selection screen of report.
I have developed the report using report painter FGI1 --FAGLFLEXT which is having gsber field.
In selection screen it self i want this GSBER FIELD .How to achieve it.
kindly guide me.
regards,
padmaja.

Hi
What I understand from your question is you want bussiness area value on selection screen you can achive this by just using the by export/import parameter or by get/set parameter id.
Please elaborate what exactly you want.
Regards
Sagar.

How to diable the default option of report-based total (when applicable)

Hi,
Anybody know how to diable the default option of report-based total (when applicable)?
By default this aggregation rule option is checked.
There should be some configuration tag in instanceconfig.xml or somewhere else, such as <ReportAggregateEnabled>true</ReportAggregateEnabled>?
Regards,
Tina

you can change this from admin tool,
open admin tool,
business model and mapping
find your column in the model
double click your column, click on aggregation, >> default rule >> none.
but if you do this, you cant make any sum operation.

Modification on selection screen of report

Hello guys,
I have a requirement where in i need to modify the initial selection screen as per clients requirement. The scenario is as follows:
Suppose 'EMPLOYEE' and 'PORTFOLIO' are two of the fields of a cube on which the report will be run. Now suppose there are three employees as A, B and C and A handles portfolios X & Y, B handles portfolios W & Y while C handles portfolios X & Z.
The initial selection screen of report will have two selection fields first as the employee and second as the portfolio.
When we do F4 at employee it will display A, B and C. Now the requirement is if we F4 at portfolio it should display only the relevant one for that employee.
For example: if i give employee as A and when i do F4 at portfolio screen it should give me only X and Y and not all the portfolios viz. W, X, Y & Z
Is there a way to achieve the above scenario????

Hi Chakradhar,
Refer this code :
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
SELECTION-SCREEN END OF BLOCK BL2.
AT SELECTION-SCREEN OUTPUT.
CALL SCREEN 100.
when user will click on this radio button , a pop up screen will appear dynamically.
Reward points if helpful.
Regards,
Hemant

Default Screen Resolution 15"

What is the default screen resolution for a macbook 15"? I have found that people say 1440x900 but that is not even an option on my computer. Also, my icons on my desktop are miniature. How do I fix that? My screen resolution was fine until I plugged in a doppler, then my screen zoomed in and when I tried to fix it and then unplugged it, it's all messed up.
Thanks in advance

It might help in Display preferences if you click on Detect Displays first.
To change the size of desktop icons:
Ctrl-click on a clear part of the desktop background.
Select Show View Options.
Set the icon size, etc to your personal taste.
Bob

Customer/Supplier Ageing Screens and Reports

Hi
We have a request for change in the Customers/Suppliers Ageing screens and reports.
Our clients require the appropriate transaction date field to be available on the detailed screen and the detailed report and statement.
eg. If they are ageing by document date - they need to see the document date against each transaction and it is very important that the reports have it.
We have more than one case where this has been requested. It is quite usual and an expected piece of information for credit control operators.
Thanks

Hi Adrian
Would the XLR you have produced solve the following problem I have.
When producing an ageing report the value date used is not the due date of the document but the due date using the BP's terms.
I've tried to create an XLR but cannot resolve the fact that items reconciled after my ageing date are excluded.
Any help would be appreciated.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

Creating Cpmplecated screen in report program

hi,
We have requirement of creating report program with complecated screen design.This screen can be created easily in Dialog programming .I want to create similar screen in report program .
Please suggest how can I achieve this.
Thanks
Saurabh

Hi,
In the report program,
parameters: a type i.
now go to se51 enter the name of your program and screen no as 1000 and do the required changes as per the requirement.
if you execute the report, whatever you modified by using se51 will come.

Default screen no. reports.

Similar Messages

Maybe you are looking for