Default Start Variant for VF04

Any Info on Default Start Variant for VF04.
Regards,
M

Dear Manisha,
Default Start Variant for VF04
There are two types of variant in VF04.
One is the selection variant before clicking the Display Billing List Button.
You can set the start variant via SE93 using the Change mode.
The second variant is the Billing Layout display variant.
This is after clicking the Display Billing List Button.
After creating your layout display variant, you can set it by clicking :-
Settings ->
          Display Variant
                            -> Administration
Select the layout display variant you want and click :-
Edit ->
        Define default settings
Regards,
Rakesh

Similar Messages

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Default screen variant for a user in T.Code - FB60

Dear All,
My client requirement is create a new screen variant for T.Code - FB60 & make it default for certain user.
Your help will highly appreciable.
Regd,
Sp sahu

Hi Sahu,
Have a look at URL
http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
Hope this provides inputs.
Thanks
Lakshman

Default starting point for a search? Stopping a Finder Search?

"Command F" brings up a search window, defaulted to "This Mac". All too often, I forget to switch the search to my intended target before entering the search criteria. I've got several TB of storage on line, so a "This Mac" Search can take a l-o-n-g time. I can't find a way to stop this search once it's started. Is there a way to set a preference for Find to default to the selected item (disk, folder, or whatever) rather than the whole computer? Am I missing a "cancel" button somewhere?
Peri

Backspacing or deleting the search criteria does not work. Once the beach-ball cursor starts spinning, nothing I do has any effect until the search is complete - which may be several minutes.
On 10.4, there was is an "x" at the lower righthand corner of the search window (next to the search indicator), which would cancel the search. There is no "x" on 10.5.
Saving a search might be an answer if I repeated the same search frequently, but I don't. Also, I'd have to remember to use the sidebar. If I could remember that, I'd probably could also remember to change the starting point for the search.

BPEL : Setting the default start value for instance ID

The instance ID for the processes are generated by the system, is it possible to set the starting value for the instance id. for eg: when I deployed a new process on a fresh installation and created an instance through BPEL console, it created a new instance with instance ID #1.
Is it possible for me to start the value from a different number say "5000"

Hi ashutosh,
I think you can achieve this by writing a small java code in this Java Embedding activity.
For using Java Embed in BPEL, you can refer to the following blog:
http://technology.amis.nl/blog/?p=2387
Cheers,
Abhi...

SAP VIM Integrated Invoice Cockpit - single default layout variant for all exceptions

Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan

Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan

IH01 default screen variant for all users

Hi,
I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
Ajay

hi
if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
only thing is don't authorize the user to create the variant
from SAP help:
Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
Maintenance of selection variants
When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
regards
thyagarajan

How do I set default start date for email flags

In IOS 4 and 5 every time i put a flag on an email it used "today's date" as the default date for the flag when the flag synched with Outlook. Under IOS6, my email flags show up in Outlook with "no date". Is this an IOS 6 change or did I somehow change the default to "no date" by mistake on my iphone. This is importatnt becasue Outlook allows you to arrange you inbox by Flag Start Date. When you arrange it this way, all the flagged emails move to the top by date. You can then remove all the non-flagged emails as a group.

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

Selection variant for a report painter

Hi,
I created a report painter report. I want to create a default selection variant for a specific user. For example, I want user GIRARDJU to have company code=ADM, period 6 to period 13. I tried to create a variant and call it U_GIRARDJU but it doesn't work like it does for the standard SAP reports...
Any suggestions?
Thanks a lot,
Julien

Hi,
First go to the report you have created.
Then save the selection criteria you want & give an appropriate name to your variant (eg: /INOKA).
When you execute the report next time, this variant will be there, & by double clicking it you'll get the saved information.
Best regards,
Inoka.

TA38641 Changing the calendars event default start time

Is there a way to set a default start time for new events in calendar? For some odd reason my event start time always is 3am,and I'd like to change it to 8am ...

Unfortunately not. The start default start time is usually the next hour, when entering an event.

I can set my default home page (when Firefox starts) but if I open subsequent tabs I get a blank page. How do I set my default home page for all tabs.

I set my default home page to AltaVista.com. This page comes up as expected when I start Firefox. However if I open a new tab I get a blank page. How to I setup Firefox to use my default web page for all subsequent tabs. This was an easy process in IE

Sounds like you want the New Tab Homage extension.
https://addons.mozilla.org/en-US/firefox/addon/777/
For more info about extensions, see [[Using extensions with Firefox]]

Disable the default "Start my camera" button for rtc WebcamPublisher

Hello,
I notice in the samples that WebCamera displays the cam. Is there an easy way of disabling the "Start my camera" button? I wish to control this from the app itself.
<rtc:WebCamera width="65%" height="396" id="webCamPub"/>
I notice in the WebCamera sample that it achieves removing the default "Start my camera" button, by assigning the rtc Webcamera a width and height of 1 and manipulating these through WebCamPublisher class, but I do not see anywhere a "button" = disabled or something similar .

Ok thanks, overriding the addStartStopBtn function fortunately was a piece of cake for the WebCamera class, and that was all I needed.
I notice WebCamera is extremely advanced compared to the simpler webcamsuvscriber stuff.
I try to build on adobe grown material so I can avoid high maintenance costs down the road

How to set a Default variant for VL06O (Outbound Delivery Monitor)?

Hi All,
I want to set a DEFAULT VARIANT for VL06O (Outbound Delivery Monitor) selection screen with "For Picking", "For Confirmation", "For Goods Issue" and "List of Outbound Deliveries" button option.
I have already created a variant with those 4 buttons. But I cant find a way to set it as DEFAULT.
Appreciate your help on this.
Please note I'm using SAP ERP 6.0 Ehp 4.
Thanks & best regards,
Anupa

Hi Indranil,
Superb !
This is what I was searching for.
That works really fine. Thanks a lot!
Best regards,
Anupa

User specific default variant for FBL1n FbL5n

Friends,
I am trying to create a variant for FBL1n report layout for specific user. Now the issue is the user has to go and select his specific variant every time he executes FBL1n. Is there any way by which we can default the specific variant for specific user.
Any help is much appreciated.

Hello,
Go and change the variant selection settings in FB00. You select the relevant variant.
Regards,
Ravi

Set default variant for user in ME5A

Hi gurus,
It's possibile to set a default variant for the ME5A transaction for a user? Which parameter I must use in SU01?
Thanks
regards.

There's a way to add entries to that table.
Go to the table ESDUS through SE16N and activate the editing mode by entering &SAP_EDIT in the command field. It will give you information message in the bottom "SAP editing function activated" ("Maintain entries" check box will be visible).
Let us examine the ABAP code for the program behind ME5A
DATA: l_action LIKE esdus_s-action VALUE 'RM06BA00'.
CALL FUNCTION 'ME_SET_REPORT_USERVARIANT'
   EXPORTING
     im_report           = l_report
     im_esdus_action     = l_action
     im_standard_variant = l_variant.
MOVE l_action      TO my_esduscom-action.
MOVE 'USERVARIANT' TO my_esduscom-element.
MOVE sy-slset      TO my_esduscom-active.
Stay in SE16N and in the field "Act." enter RM06BA00 and execute. You'll see all the users who executed the ME5A (a.k.a program RM06BA00) and the default variant SAP selects is "SAP&STANDARD" which is a system variant, in the "Active" field. Change that value to what user want to be defaulted. Keep the value 'USERVARIANT' in the El. field. Click save on the top. It will popup a window records inserted, deleted, changed. Just hit enter.
Now whenever the user executes it will be defaulted to whatever you rewrote in the table.
Caution: Do not use &SAP_EDIT with other tables especially which share common primary keys it can serious problems in your database.

Default Start Variant for VF04

Similar Messages

Maybe you are looking for