Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Similar Messages

  • Please guide me how to include storage location to existing material master

    Hi Guru's,
    Please guide me how to include storage location to existing material master....
    please provide step by step process or provide any documentation that would be helpfull to me...
    please let me know of my question is not clear..
    Thanks in advance and will give full points....
    Srinivas...

    Hi
    First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
    Once defined under the plant, you can create the same storage locations in the material master
    Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
    Hope it answers your question.
    Regards,

  • The system does not get Storage Location of the material from the Contract

    Hi to all,
    We are encountering a problem now regarding the PR to PO conversion.  Our ABAPer has made a background job for the User to convert a PR to PO using ME59N. 
    Background Job : ZPTI_MM_PR_PO_CON
    Program : RM06BB30
    Tcode: ME59N
    Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
    Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
    Problem:  When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
    Steps done :
    1. Create a Contract (ME31K)
        1.1 Specify the SLOC of the material
    2. Create PR (ME51N) and enter the Contract Number inside the PR
        note : In the PR the material has a Storage Location which defaults from the Material Master.
    3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
    4.  Set the job to "Immediately"
    5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
    6. Save
    7. Go to SM37 and check the job if finished.
    8. When the job is finished, check the PR if it has a PO.
    9. Display the PO.
    10. Check if the storage location in PO has gotten from the Contract
         The problem now appeared.
    We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
    Please help what should be checked on our side.  Our ABaper is also currently debugging the program but we
    are seeking help to fasten the solution.
    Best Regards,
    Elynne

    Hi Elynne,
    Definitively, it is a problem with ME59N background process.
    It is better if you can create a message to SAP asking for the solution.
    I only found the next SAP note:
    Note 1287723 - ME59N in backgound does not populate PR details in PO.
    But, I do not know if it will help to resolve your issue.
    I hope this little information can help you in anyway.
    Kind regards,
    Sandra

  • Exclude storage locations from the MRP run

    Hi all,
    Is it possible to exclude stock of specific storage location from the MRP run?
    Thanks for your help
    Thomas

    Hi,
    2 things,
    1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
    2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
    The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
    Regards,
    Vivek

  • Exclude stock at a storage location from the Productionn Planning run

    Hi,
    We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
    Please suggest a way so that it is excluded from the Production planning
    Regards,
    Sireesh

    Hi Sireesh,
    Please try these following options.
    1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
    2) Try anyof these user exists
    APOBP011 Enhancement for Stock BAPIs (BUS10504)
    APOCF011 Inbound Processing: Stock
    APOCF027 Customer-Specific Enhancements: Stock
    3) Exclude the category from the ATD receipts category group maintained in the master data
    Regards
    R. Senthil Mareeswaran.

  • Default Storage location from PO to GR

    Dear All,
    How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
    regards,
    qsm sap

    Hi,
    First Storage location should be extended in Material master.
    Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
    While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
    If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
    One other option is In IMG settings if you set the checkbox set storage location automatically.
    Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
    No matter if you extended in material master/PR/PO
    rgds
    Chidanand

  • Default inspection Type In the Material Master

    Hello
    We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .
    Thanks
    JJ

    Dear JJ
    This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
    Or esle you can run QA08 wherein you can assign inspection type enmass.
    Please let meknow your feedback
    Regards
    Gajesh

  • Copy characteristic value(class 023 ) from the material master to the batch

    Dear All,
    Is there a way to copy the characteristic value (class 123) from material master to the batch master automatically once we create a batch of that material
    I tried to create a dependency, but didnu2019t know what to write in the dependency editor
    Please advise

    I dont know if its possible in standard,  you can try and create a reference batch, and use the below user exit I found in SAP library :
    Set Up Customer Exit for Determining Source Batch
    You can use function module exit EXIT_SAPLV01Z_011 in SAP enhancement SAPLV1ZN when assigning characteristic values to batches. You use this to specify a reference batch when creating a new batch with the central function module VB_CREATE_BATCH.
    Further notes
    The reference batch must always be specified completely. This means the reference material, source batch and reference plant details must have been entered if the batch is determined at plant level.
    All batch master data is copied. If the batch is classified in this enhancement, the values assigned to the corresponding characteristics are copied.
    In the exit, you can use a communication structure with the application data for the respective business transaction (for example, plant or material type). If you require further information, you must obtain it yourself in one of the user exits (such as time, user name, or date, for example).

  • Mass Storage Location Extention in Material Master

    Hi,
    Would like to how to do mass extention of material for storage location.
    Regards,
    Vengat

    hi
    use trannsaction code MMSC  this willbe plant specific
    or use MMSC_MASS
    regards
    kunal

  • Get Batches at a Storage location for the Material

    I want to get a list of all batches at a sloc for a matnr.I want to get special stock,sales order stock etc just like MMBE.I've debugged,searched the forum but couldn't find anything.I'm looking for a FM.Or joins is the only way out?
    Right now I'm looking at MKOL and MSKA are there any other tables I need to look at?
    Thanks a lot..

    You will have to read the batches of a given material from MCHA(if batches are maintained at a plant level) or MCH1(cross-site batches), then get the stocks of each of the batches by calling MB_READ_MATERIAL_STOCKS. You will have to fill in the MTCOM parameter.

  • Restrict certain Storage location from getting displayed in CO06 !!

    Dear all -
    We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
    in CO06.
    I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
    Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
    I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
    Thanks
    Arun
    Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

    Dear,
    System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
    Check in BOM component details storage location you have defined.
    Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
    Also check the Material requirements planning (PP-MRP)
    --> planning process
      --> BOM explosion and dependent requirements determination
        --> storage location determination for BOM explosion
    Regards,
    R.Brahmankar

  • Change default storage location during creation of PO

    Hello all,
    I have the following question.
    When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
    I need to change this default, because the storage location must be determined in another way.
    So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
    For this I probably need a BAPI.
    Can anyone tell me which BAPI to use and how I can implement this?
    Because I also no experience with BAPI's.
    Thanks in advance.
    Kind regards,
    Marco

    Hi Van,
    You need to goto SE18 -> give 'ME_PROCESS_PO_CUST'  in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
    I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
    <text removes>
    Thanks,
    Siva
    Message was edited by: Matthew Billingham - don't ask for points

  • Reference a document in the material master

    I'm wondering if anyone can suggest a way that we can do the following....
    We basically want to have a field/location in the Material Master that will reference a document stored somewhere on a network server and in turn, display and print on the PO (the document name prints, not the contents). Any suggestions of where to start?
    So in the MM for Material # 123456
    MyField = "MyInspectionDoc.pdf" (MyInspectionDoc.pdx resides on \\mynetworkserver\MyInspectionDoc.pdf)
    Or
    Is there a way to have an attachment in the MM that will automatically be pulled into the PO when the PO is created (with the material item as a line item in the PO of course)

    I think you are mixing DMS (document management) with GOS (generic object services)
    GOS content is created as shown in your screen shots.
    You cannot even see from any transaction which materials have a GOS attachment. The GOS attachment can only be accessed from the object (material master) where it was created.
    DMS is a central component in SAP and embedded to the material master like it is done with classification too.
    You can create the documents in CV01N transaction and link to the material or directly from material master. you can use CV04N to search for documents
    In the material master you will find the link to the document in alternative data tab where you have as well your alternative units.
    This screen looks like this one:
    Those material master attachments/documents do not print automatically in a PO, for this you have to do some ABAP development

  • Open a storage location for a material

    Hi,
    how can I open a storage location for a material ?
    Is also possible to do it automatically ?
    Regards

    A storage location is customizing, this is in general open to take any material.
    depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
    if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

  • Storage location from Shopping Cart is overwritten in PO

    Hi
    I am trying to convert a Shopping Cart to Purchase order using the sourcing application. However while doing that my Shopping Cart Storage location always gets overwritten by one particular Storage Location in PO. Even if i try and change the storage location to the correct one in PO, it again gets overwritten. This is causing problem during the Goods Receipt.
    I am using the SRM 5.0 version and recently the system got upgraded to Support Pack 9.
    Any help in this regard would be highly appreciated.
    regards
    manoj

    Hi Manoj,
    Please go through the following observations based on the information you have provided :
    1. Check the Extended Attributes tab for the user whether the concerned plant and storage location were maintained or not.
    2. Check whether that particular storage location is maintained for the concerned plant or not.
    3. Check for the same using different user and different plant storage location combination.
    Its difficult to say exactly what is the problem but for me it looks to be the storage location is not maintained for a particular plant thats why its taking the default storage location (generally the first one in alphabetical order)
    Please revert after checking the above observations for further help.
    Reward points for suitable answers.
    Rgds,
    Teja

Maybe you are looking for