Default Time for Clock Timer
Every time I go to set the time on the timer on my iPhone, it's at 1:30. At one point, in the past, wasn't there something where it would stay at the previous setting?
Is there a way to make it stay at the previous setting when the alarm goes off?
If your iphone is jailbroken ...
Open
//private/var/mobile/Library/Preferences/com.apple.mobiletimer.plist
Then modify the TIMER_INTERVAL value to a number of seconds of your desire. (note that the app only deals with minutes, so you'll have to set it to a multiplication of 60 sec, e.g. 0, 60, 120 etc')
You can use whatever property list viewer to do that.
Similar Messages
-
ADF application taking more time for first time and less from second time
Hi Experts,
We are using ADF 11.1.1.2.
Our application contains 5 jsp pages, 10 - 12 taskflows, and 50 jsff pages.
For the first time in the day if we use the application it is taking more than 60 sec on some actions.
And from the next time onwords it is taking 5 to 6 sec.
Same thing is happening daily.
Can any one tell me why this application is taking more time for first time and less time from second time.
Regards
GayazHi,
If you don't restart you WLS every day, then you should read about Tuning Application Module Pools and Connection Pools
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0301
And pay attention to the parameter: Maximum Available Size, Minimum Available Size
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0314
And adjust them to suit your needs. -
Set default value for date/time to previous month
Hi All
I have two date/time parameters in my report and I want to set the default value for both the parameters
For start date parameter I want the first date of previous month and for end date parameter I want the last date of previous month.
Can someone please point me to the right direction
Thanks
RoneHi Rone,
These links can be helpful for you:
http://www.bidn.com/blogs/hardikabhavsar/bidn-blog/1639/default-date-parameters-in-ssrs
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/584a98ae-bb75-4740-9198-e6be3c1aec12/
Regards,
Manoj
*Happy to help
http://experiencingmsbi.blogspot.com/ -
Interface is taking lots of time for first time execution
Hello all,
I have one inbound interface in which i am updating T-code CO01 ,CO15 , MIGO and MB1A respectively
depending upon the condition in the incoming file.
When ever i run this interface for the first time it takes lots of time for execution, but when i run the same interface again with the same file it is taking half time of the first time execution.
I am not able to understand why it is taking lots of time for first execution and after that execution time is redued very much with the same file
Kindly help
Thanks
Sachin Yadavthank you santhosh for your reply..
as this program is in Production system it it taking 3 to 4 hour to execute.
Previously it was OK but from last 2 to 3 moths it is taking more time.
when i debug the code it is working fine. I din't find any point at which it is taking more time.
I am not aware about buffers and SAP memory. can you plz help
Do you have any idea why this is happening.
Or how can i rectify the problem?
Thanks
Sachin -
Application takes lot of time for first time..
Hai guys,
we made an application on a 3rd party software for use on a tool which connects to SAP with RFC.
the applicaiton updates ORACLE databse after getting relevant information from SAP.
Now,for information on SAP side we have RFC.
for updates on oracle we write SQL.
the unique problem is..this applicaiton takes lot of time when used the first time..
once the first use is over it takes much lesser time for any subsequent use(by any user)..
I DOUBT THE SQLS(ESP UPDATE) TAKE MUCH TIME THE FIRST TIME.I DOUBT THE SQLS(ESP UPDATE) TAKE MUCH TIME THE FIRST TIME.
Why don't you trace the call and be sure? Don't guess.
once the first use is over it takes much lesser time for any subsequent use(by any user)..
Because the statement is in the cursor cache - clear the cache each time and the statement will run long every time. Again, trace the call and determine the issue - most likely you need an index or have an improperly coded SELECT statement. -
Get actual time for specific time zone
Dear experts,
is it possible to get the actual time for a given time zone? We need to know the time of a certain plant and we are searching for a standard function module which calculates the time based on the plants time zone.
Thanks in advance,
David
Edited by: David Claes on Apr 12, 2010 5:05 PMYou can use TIME ZONE statement for this.
DATA: time_stamp_s TYPE string,
time_stamp TYPE timestamp,
tzone TYPE timezone,
wf_date_conv TYPE sy-datum,
wf_time_conv TYPE sy-uzeit.
tzone = 'CET'.
CONCATENATE sy-datlo "Local Date
sy-timlo "Local Time
INTO time_stamp_s.
time_stamp = time_stamp_s.
CONVERT TIME STAMP time_stamp TIME ZONE tzone INTO DATE wf_date_conv TIME wf_time_conv.
Otherwise FM IB_CONVERT_INTO_TIMESTAMP/IB_CONVERT_FROM_TIMESTAMP can bne used for same.
Edited by: Satyajit on Apr 13, 2010 1:31 PM -
Hi all
I am writing a custom program and I have a time field in a table. I would like to add the SAP matchcode for time that show a clock that let the user choose hours minutes and seconds ... but I cannot find the name of that input help
can anybody help me please?
regards
GabrieleHi,
PARAMETERS : p_time TYPE DEMOTIME.
If you want time symbol you should create a screen. create the label and double click on the label just assign the Icon name as ICON_TIME. the label should show as a watch icon.
Regards,
Dhina,,
Edited by: Dhina DMD on Jun 3, 2011 2:36 PM -
Flexible DWS With Fixed Time For Clock In
Hi Experts, Please Advise
The issue is exactly like the following example
an employees required to work 9 hours a day
they can come from 8:00 am to 09:00 am but from 8:00 to 9:00 is not tolerance, the system required to calculate 9 hours from clocking in with maximum clocking in 09:00 am
Emp X clock in 8:00 he must clock out MINIMUM at 17:00
Emp Y clock in 8:30 he must clock out MINIMUM at 17:30
Emp Z clock in 9:00 he must clock out MINIMUM at 18:00
but clocking in after 9:00 am is not allowed
Any suggestions ?
ThanksHi Islam,
You can check it that employee's clocked in before 9 am or after that through below PCR. Create a one constant in T511K and store as 9.
HRS=PBEG
HRS?CXXXX (XXXX= Constant)
Leave
<
Leave
>
COLERYYE (YY= Error message no)
Insert this PCR with PTIP function after P2011 function in time schema.
Check and tell me.
Regards,
Sankarsan -
Query takes long time for first time
I have a table with 100 million records and another tables with many rows.
When I ran a query - it's takes about 1 minute to complete, but when I ran it again it takes less than 1 second to complete.
Why it is happening?
Thanks,
Tz.Welcome to the forum.
When you post a question always provide your 4 digit Oracle version. Different versions have different functionality and this can affect your results and the advice you need.
For performance tuning questions see the FAQ (upper right corner of page) for the information needed for tuning requests.
>
When I ran a query
>
How did you run it? Did you use sql*plus, sqldeveloper, some other tool?
What command did you enter?
Using sql*plus you can get an execution plan for the query by
SQL> set serveroutput on
SQL> set autotrace traceonly
SQL> select * from emp;
Execution Plan
Plan hash value: 3956160932
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 14 | 546 | 3 (0)| 00:00:01 |
| 1 | TABLE ACCESS FULL| EMP | 14 | 546 | 3 (0)| 00:00:01 |
SQL> -
Slow load time for Quick Time in Mail
Does anyone know why when you receive a video file (like WMV) in Mail that Quick Time takes so long to load it? It did not use to take so long before Snow Leopard. If you click on play before it is loaded, you get audio only. Are there any work arounds or something other than Quick Time that can be used?
From Adobe Support: 17 secs response time is a normal time interval for the "Print Settings" dialogue.
-
I tried to sign in to activate face time for 1st time, w/correct apple ID
We have tried to activate our face time account for two days now, and have been unsuccessful. The Apple ID and the password are both correct. We have checked using the iPad, and were able to sign in and use it. The iMac says "Could not sign in. Please check your network connection and try again." We are able to use Safari, browse, and check email, and all lights on router seem to be okay. Can anyone give us a suggestion as to what we are doing wrong? We cannot go in and change preferences or check settings as it is not highlighted to be able to do so. Thanks for any words of advise. We are stuck!
I can't say why it should be doing this. If it persists then your only options are to set it up on another Mac or iOS device if you can (then you will be able to sign into it), or failing that to contact Support - though I don't know how helpful they are likely to be.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee. -
my iPhone works well...suddenly hang when im on the phone...trying to reset with the home and power button, doesnt work, trying to charge for for several hour..its not charging, trying to access in itunes,,cannot acces.....what to do...please help
Has it ever gotten wet?.. I'd make an appointment with Genius bar at an Apple store, there's something majorly wrong that a simple 'reset' isn't going to fix...
Sorry... -
Run a for loop for specified time period
Hello to everyone,
I am trying to create a data acquisition system for a NI 9162 board. I need to
acquire a certain quantity of data (for example 10 minutes) each half an hour
for example and repeat this process a lot of times. I am trying to do this with
a loop execution but this is not working well. The first data acquired is
ok but in the rest there are a lot of problems. The times are not being
respected and the board is not acquiring anything. Does anyone can help me? I
am attaching the VI that I am using.
Thanks,
Attachments:
Consulta.vi 80 KBYou can either use an System.Timer event OR a timed loop in the Structures pallete.
Use the NI Example finder and search for timer to get an example of timed loops.
Or use a .NET constructor, go to System in the drop down, the select System timer for the timer control, register the event callback.
Use the rating system, otherwise its useless; and please don't forget to tip your waiters!
using LV 2010 SP 1, Windows 7
Attachments:
Timer.vi 11 KB -
Sap Hr Time Management u2013 Time Types
Hi friends,
I am working on overtime. Pcru2019s TO01 & TO02.
When I am running the RPTIME00 program, the time type of overtime i.e. 0040 are not seen in the ZES or SALDO tables. I had booked more than planned working time for over time.
As for the overtime hrs booked the ZL table is populated.
Why the time type 0040 is not storing the Overtime values in ZES & SALDO Tables?
Regards,
ThakurHi Ajay,
TO01
VARSTDAYTY
0
VARSTFREE
N
HRS=S
ADDDB0900Z
The Limit we had set as S=Planned working Hrs
V_T555A
0040 - Time type Day & Period Balance
TO01 Log
Input & Output of TO01 = Planned working hrs will be transfred to Time Type u2013 0900
TO02 Log
Input of Tip Entry
u2013 Pair Types coming in based up on the Break schedule.
Out Put
-the last two entries of the pair types are with Processing class M
From to 1 P ID CT P Ttyp O Number
17:25 17:50 0 3 10 M 0040 P 0,25
17:50 24:50 0 3 10 M 0040 P 7,00
Under CUMBT
Input
TES table TT Value 0040 is 0,00 hrs
Output
ZES & SALDO the time type is not displayed.
ZL
Overtime ZL is pouplated with the Wage type with 7,25 hrs.
If I delete the time type 0040 from table V_T555A & run the Time Evaluation it is not asking for the 0040 time type at all, where in TO02 we have the time type used for storing the value of over time.
In the PCR processing of the log it is sending the values to the 0040 TT. But the values are not displayed in TES<, ZES, SALDO.
Why it is not picking or checking the time type is avalible in the table V_T555A & Not storing the values any of the above tables? -
Getting difference between GMT time and Local time
Folks,
I am trying to get difference between gmt time and local time for Korea time zone.
which should be 9 hours.
Instead of 9, I am getting 15 hours diff.
What am I doing wrong?
Here's what I did to test it:
First I set the system (Windows XP) time zone to Soul (Korea GMT+9hours) time zone.
Then I ran the following program, and I got 15 hour diff, not 9.
Thank you in advance!
import java.util.*;
public class Using_GregorianCalendar
public static void main(String args[])
Using_GregorianCalendar ugc = new Using_GregorianCalendar();
ugc.getTimeDiff();
public void getTimeDiff()
Calendar cal = new GregorianCalendar(TimeZone.getTimeZone("GMT"));
Calendar cal1 = new GregorianCalendar(cal.get(Calendar.YEAR),
cal.get(Calendar.MONTH),
cal.get(Calendar.DATE),
cal.get(Calendar.HOUR_OF_DAY),
cal.get(Calendar.MINUTE),
cal.get(Calendar.SECOND));
int gmtHour = cal.get(Calendar.HOUR); //(Calendar.HOUR_OF_DAY);
int gmtHourOfDay = cal.get(Calendar.HOUR_OF_DAY);
int gmtMonth = cal.get(Calendar.MONTH);
int gmtYear = cal.get(Calendar.YEAR);
int gmtMinute = cal.get(Calendar.MINUTE);
int gmtSecond = cal.get(Calendar.SECOND);
int gmtDate = cal.get(Calendar.DATE);
Calendar localCal = Calendar.getInstance();
int localHourOfDay = localCal.get(Calendar.HOUR_OF_DAY);
int timeDiff = (localHourOfDay - gmtHourOfDay);
//Korea time is GMT + 9 hours so I should get a difference of 9
//why am I getting difference of 15?
System.out.println("************** in getTimeDiff() **********************");
System.out.println("gmtDate: "+gmtDate);
System.out.println("gmtHour: "+gmtHour);
System.out.println("gmtHourOfDay: "+gmtHourOfDay);
System.out.println("localHourOfDay: "+localHourOfDay);
System.out.println("timeDiff: "+timeDiff);
System.out.println("**********************************************************");
}//getTimeDiff()
}//class Using_GregorianCalendar
/* here's the output of this program:
************** in getTimeInGMT() **********************
gmtDate: 14
gmtHour: 6
gmtHourOfDay: 18
localHourOfDay: 3
timeDiff: -15
*/DrClap wrote:
sabre150 wrote:
Nearly correct since the Daylight saving may or may not be in effect which does depend on the date...I would simplify that to this:
TimeZone korea = TimeZone.getTimeZone("Asia/Seoul");
long delta = korea.getOffset(new Date().getTime());
System.out.println(delta / (1000.0 * 60 * 60));That's assuming that the OP really meant UTC when he/she said "GMT". Most people don't realize there's a distinction and that Java's timezones are all based relative to UTC.I suspect you are right in assuming that the OP want UTC and not GMT. I figured it was better to illustrate that the method can be used for getting the time difference between any two TimeZones.
Maybe you are looking for
-
I have facing the following problem during production order confirmationm 1] posting date not possible in your s& g/l account. 2] period 010/2007 is not open in s&g/l account pl.resolve the same
-
Aspect ratio problem with consumer camera and Premiere Elements 11
Hello everyone - I'm Steve. I'm new here. I do still photography on a pro level, digital and analog, but I am an absolute dummy with video...but then, I don't want to do much, just rudimentarily cut a few family videos, upload them, etc. However, I c
-
There is a little dialog box right in the top of my iPad screen.it is in the middle .I was making a comment in the Daily Mail online and it's appeared.it actually is the miniature version of the page I was commenting on.Is is about two inches in widt
-
Nokia E71 hard reset and then....
Hi community, what happens is i perform a hard reset on my nokia e71, will i lost some software (that originally came with the phone)? or everything remains the same as when i bought it brand new? Solved! Go to Solution.
-
About this mac storage display error (graph)
The subject display indicates (in the graph) that there is 140 TB used for backup....the text numbers are correct. I reindexed the HD as suggested in another thread - no change. This is in the mildly annoying category - not a show stopper. Barry