Default values for files and columns when adding a discoverer porlet

Hi, i'd like to know how to configure the default value for numbers of columns and files when i add a new discoverer porlet in a portal page.
The actual default value is 10 files and 6 columns and i always have to increase it to at least 100x100.
Is there any config file where i can change that?
I've found a configuration.xml in $ORACLE_HOME/discoverer/config/configuration.xml
with a section

but couldnt find a parameter for those items.
Thanks in advance.
Daniel Perez

I think triggers are the best device.
Scott

Similar Messages

Default values for Insert and Update

What is the best way to default the current sysdate for a date column on a table when doing an insert or update through a form? And related to this, what is the best way to default the current user (APP_USER) for a varchar2 column when doing an insert or update through a form?
For these columns, I want to display them on a report, but they should be hidden on the form because I would like to have the app default the values to sysdate and APP_USER. However, when I have tried to use the table default values in "user interface defaults" and using either :APP_USER or &APP_USER or SYSDATE, it only shows this literal value on the form (item is not hidden while I debug this). It does not show the actual value I'd want, such as "user1". Does this make sense?
Thanks for your help.
-Reid

I think triggers are the best device.
Scott

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Tax codes - can you set up default value for rows and freight? HELP!

Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?

Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas

Set default values for StartMonth and EndMonth Parameter based on value selected from the previous parameter(Not cascading)

I have a scenario where it has multiple parameters like.....
Period which consists of "Year,Quarter,Month" as a values.
When user selects "Year" value in "Period" Parameter then "FromMonth" has to set its default value as 36th month from now.
Example: If user selects "Year" then "FromMonth" has to show "April-11".
When user selects "Year" value in "Period" Parameter then "EndMonth" has to set its default value as current month.
Example: If user selects "Year" then "FromMonth" has to show "March-14".
If user selects "Month" Value in "Period" Parameter then it has to allow user to select the Month Range and again if user selects "Year" value in "Period" Parameter then StartMonth has to show 36th month from now and
End Month has to show current month.
Please help me how to resolve this issue.
Thanks in Advance.

Hi Vasu_479,
First, you need to create a dataset to set the StartDate and EndDate parameter's value using the query provided by Visakh. And then use the StartDate and EndDate parameter to filter the data in MDX query. Here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

How to load a default value in to a column when using sql loader

Im trying to load from a flat file using sql loader.
for 1 column i need to update using a default value
how to go about this?

Hi!
try this code --
LOAD DATA
   INFILE 'sample.dat'
   REPLACE
   INTO TABLE emp
   empno   POSITION(01:04) INTEGER EXTERNAL NULLIF empno=BLANKS,
   ename   POSITION(06:15) CHAR,
   job         POSITION(17:25) CHAR,
   mgr       POSITION(27:30) INTEGER EXTERNAL NULLIF mgr=BLANKS,
   sal        POSITION(32:39) DECIMAL EXTERNAL NULLIF sal=BLANKS,
   comm   POSITION(41:48) DECIMAL EXTERNAL DEFAULTIF comm = 100,
   deptno POSITION(50:51) INTEGER EXTERNAL NULLIF deptno=BLANKS,
   hiredate POSITION(52:62) CONSTANT SYSDATE
)-hope this will solve ur purpose.
Regards.
Satyaki De.

How to set a default value in an ADF table when adding a new row

Hi Guys,
I have a view object which I am using to create an ADF table. I also have a button which uses a CreateInsert binding to add a new row to the table. I have four fields: created_by, creation_date, last_update_by and last_update_date.
I want these values to be set automatically when I click add new row.
The values I want are:
created_by - admin
creation_date - sysdate
last_update_by - admin
lsat_update_date - sysdate
Any suggestions on how to do this would be appreciated
Thanks
-Mark

mark,
Those four fields can be set completely declaratively in the Entity Object (check out the History Colum feature). Copied from the (11g) documentation:
If you need to keep track of historical information in your entity object, such as when an entity was created or modified and by whom, or the number of times the entity has been modified, you specify an attribute with the History Column option selected (in the Edit Attribute dialog).
If an attribute's data type is Number, String, or Date, and if it is not part of the primary key, then you can enable this property to have your entity automatically maintain the attribute's value for historical auditing. How the framework handles the attribute depends which type of history attribute you indicate:
* Created On: This attribute is populated with the time stamp of when the row was created. The time stamp is obtained from the database.
* Created By: The attribute is populated with the name of the user who created the row. The user name is obtained using the getUserPrincipalName() method on the Session object.
* Modified On: This attribute is populated with the time stamp whenever the row is updated/created.
* Modified By: This attribute is populated with the name of the user who creates or updates the row.
* Version Number: This attribute is populated with a long value that is incremented whenever a row is created or updated.
John

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

DEFAULT values for OUT and IN/OUT parameters in PL/SQL

Why are OUT and IN OUT parameters not allowed to have DEFAULT values assigned to them? Or is there a way around this?
thank u

For IN parameters this makes sense. For OUT parameters... hm... when you don't get anything out you also don't need a default value. I think the cases where you want to overload can't be compared with default values.
For IN a default value would be like:
If I don't add this parameter it should use 'DEFAULT' as INPUT value.
For an out parameter:
If I don't use a variable for this parameter the output value should be 'DEFAULT'.
and written into nirvana? it does not make sense to say I output something but I don't output something.
Message was edited by:
Sven W.

Default values for iBase and component in CRMD_ORDER

Dear developers,
is there a possibility to set the input fields for iBase and component in the transaction CRMD_ORDER on a userspecified default value? The Parameter-ID's IBC and IIB that are saved with the SAP-User doesn't work
Is the a known solution?
Thanks in advance,
Jens Sperk

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How to assign default values for a timestamp column in a table?

Hi
Thank you for reading my post
how i can make a column in a table to be autofilled with current timestamp ?
for example when i create a table i want its timestamp field to be autofilled with current time stamp whenever a record generated.
Thanks

TEST@db102 SQL> create table test(a number primary key, b timestamp default systimestamp);
Table created.
TEST@db102 SQL> insert into test(a) values(1);
1 row created.
TEST@db102 SQL> select * from test;
         A B
         1 03-SEP-06 05.56.34.995319 PM
TEST@db102 SQL>

How to set default permissions for files and folders

We have mac and windows computers on a network where we use Mac OSX Server 10.4 to share files. When files are created on windows computer, no problem, all users can read/write these files. However on our 2 macs (1 10.3 and 1 10.4), other users are blocked from using the files, only the owner has "read/write", group and others are "read only". As far as I can tell, file sharing is turned on ok in Workgroup Manager for the folders we share files from. How can we establish sharing for all users on our network?

Niel's suggestion is good. You might also try posting your question in the Tiger Server forums. I'm sure Tiger Server has several ways of dealing with this.

Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
I visited.
I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
Add another Value Below and set the Default Value for this field to setup multiple default values.
However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
Please let me know if you need more info. Appreciate your help.
Thanks!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Import and default values for columns

Hi guys
I have a table in which there are default values for some columns. I take export of this table.
I go to another database where this table structure is already there (but default values are not set). I run the import of table with ignore=Y. It does all...import the data...create the indexes and all...but doesn't set the default values for the columns.
Shouldn't it do that also ? ignore=Y means that ignore the object creation errors and proceed with the rest of the stuff ? Or there is some problem in my understanding ?
Version 10gR2 on AIX 5.3 and using traditional export/import.
Thanks
Amardeep Sidhu

Hanji Sidhu Sahib.
Mein Tuhade liye eh example try kita hai.
SQL> conn simar/simar
Connected.
SQL> SQL> create table orders (
dept varchar2(20) primary key,
place varchar2(20),
intcol integer default 12
2 3 4 5
Table created.
SQL>
Inserted few values ...........+ commit.
SQL> conn simar/simar
Connected.
SQL> select * from orders;
DEPT PLACE INTCOL
SALES TORONTO 12
HR LA 12
BILLING FLORIDA 12
IT HALIFAX 5
exp simar/simar@RACDB file=exptest.dmp log=exptest.log
rac01:/software/backup>exptest.dmp log=exptest.log <
Export: Release 10.2.0.3.0 - Production on Tue May 6 23:35:58 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIMAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIMAR
About to export SIMAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIMAR's tables via Conventional Path ...
. . exporting table ABC 12 rows exported
. . exporting table ORDERS 4 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
rac01:/software/backup>strings exptest.dmp |grep -i 'create'
CREATE TABLE "ABC" ("A" VARCHAR2(10), "B" VARCHAR2(10)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
CREATE TABLE "ORDERS" ("DEPT" VARCHAR2(20), "PLACE" VARCHAR2(20), "INTCOL" NUMBER(*,0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
rac01:/software/backup>strings exptest.dmp |grep -i 'alter'
ALTER TABLE "ORDERS" MODIFY DEFAULT
ALTER TABLE "ORDERS" MODIFY ("INTCOL" DEFAULT 12
ALTER TABLE "ORDERS" ADD PRIMARY KEY ("DEPT") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING ENABLE
SQL> conn simar/simar
Connected.
SQL> drop table orders;
Table dropped.
imp simar/simar@RACDB file=exptest.dmp log=imp_exptest_1.log tables='ORDERS'
rac01:/software/backup>exptest.dmp log=imp_exptest_1.log tables='ORDERS' <
Import: Release 10.2.0.3.0 - Production on Tue May 6 23:46:48 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SIMAR's objects into SIMAR
. importing SIMAR's objects into SIMAR
. . importing table "ORDERS" 4 rows imported
Import terminated successfully without warnings.
SQL> conn / as sysdba
Connected.
SQL> set heading off;
set echo off;
Set pages 999;
set long 90000;
SQL> SQL> SQL> SQL> SQL>
SQL> select dbms_metadata.get_ddl('TABLE','ORDERS','SIMAR') from dual;
CREATE TABLE "SIMAR"."ORDERS"
( "DEPT" VARCHAR2(20),
"PLACE" VARCHAR2(20),
"INTCOL" NUMBER(*,0) DEFAULT 12,
PRIMARY KEY ("DEPT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
SQL>
Here the alter table statement is in the dmp file as well as in the imported table.
Regards

Default values for files and columns when adding a discoverer porlet

Similar Messages

Maybe you are looking for