Default values within in categories/taxonomy

My costomer is a retailer wanting to use MDM for central data management. In R/3 retail they are using templates on productcategories giving them some default values on several attributes. Are there any solutions for doing this in MDM.
Regrads John-Kjell

I added the default values as fields in the category table

Similar Messages

Setting a Default Value within a Tabular Form

Hi All,
Using Apex 2.2.1
Hoping someone can assist. I have the following two scenarios where I would like to set a default value to a column within a tabular form.
Scenario One:
Prior to actually displaying the tabular form on the page, I have a region on this page where I ask the user to select a Application No. first (using a Select List with Submit). Once this item, say P50_APP is set to a value, the Tabular Form region is then presented to the user by where I then allow them to enter certain information required using the 'Add Row' button. One of the columns within this tabular form also represents the Application No.
My questions are:
a) I have made the Application No. within the tabular form as a LOV, so when the user hits the 'Add Row' button, how can I set the initial value to P50_APP value using the 'Default Type and Default' items within the column?
b) Since I am trying to achieve a master-detail type scenario here, if (a) above is not possible, if I hide the Application No. column within the tabular form, how can I set it to P50_APP when the user presses either the 'Add Row' or 'Submit' buttons?
Scenario Two:
Is it possible to pass a value from a tabular form, i.e a column within this tabular form on one page, to another tabular form column on a another page (when the user presses the 'Add Row' button) within the same application?
For example, on page 50 I have the column #APP_NUMBER# passed onto page 60 which is another tabular form that also holds the same column name #APP_NUMBER# , so when the user on page 60 hits the 'Add Row' button, I would like the App Number column default to the one just passed over from page 50.
Is this possible?
Apologies if I am asking the same things in both scenarios - just want to make sure I understand MRUs.
Thanks.
Tony.

Hi Andy,
Thanks for getting back to me but I think you are referencing these default values in the wrong section.
What I am actually trying to set is the value of a column within a tabular form to P50_APP and it seems to me that the only available options for setting default values on a tabular form column are by using:
Default Type: which can be one of:
No Default
Item (application or page item name) or
PL/SQL Expression or Function
and then actual source is set against:
Default:
Unsure as to how to actually set the value of P50_APP which is in session to the individual tabular column mentioned above.
FYI, I have tried selecting for Default Type: Item (application or page item name) and then specifying for Default:&P50_APP. as well as Default Type:PL/SQL Expression or Function and specifying for Default: :P50_APP but to no avail.
Tony.

How can we set default value within html:file

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?

Hi,
guess that one option in a RowImpl would be to check if the attribute is null or if the attribute value can be found in the VO that populates the list. If first is true or seconds false (cannot be found) you return the first value of the VO, making it the current attribute value
Frank

Default values within cfgridcolumn

Hi,
I was wondering whether or not there is a way to pass a
default value into a <cfgridcolumn> whenever a new row is
inserted. I am using <cfgridupdate> and I need to pass a
foreign key ID based on the usersID alongside any data they enter
into the record. Any help or advice would be appreciated.

Just in case anyone else is having this problem, I have
managed to solve it.
Not sure if it was the "Correct" way to solve it but it
works.
I needed to pass a foreign key value (based on the users
login) as a default value into each new record in the DataGrid. The
method i used was to create a hidden text box on the page, i passed
the variable into the text box and then used the following code to
bind it to the record.
onchange="gridMainBusinessObjectives.dataProvider.editField(gridMainBusinessObjectives.sel ectedIndex,'companyID',hidCompanyID.text);"
The above code is part of the grids onChange event
"hidCompanyID" is the name of the hidden text box containing
my foreign key
I hope this can be of some use to anyone who is having the
same problem I was having.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How can I get a default value to show the name instead of the ID.

I have a field with with a LOV that works great! It displays first & last name and returns the ID to the field.
The problem is the users want the first & last name to automatically default in the field without selecting from the LOV. However, I still need to store(return) the ID.
Also are application users username and passwords case sensitive?

Angie, Can you provide some more details.
This is a popup LOV correct? So the field in question is the source database column or is it static or what is it currently?
I am not sure if I understand your business rule of "automatically default in the field without selecting from the LOV" if that is the case why select from the LOV.
None the less try this.. Here is what I am assuming you would like: a value is set on a previous page or throughout yoru application when you arrive on page X a LOV is there that could have it's value derived from an item on a previous page.
So your LOV query should be like this
select a,b from your_table where foo = 'abc' OR :ITEM_VALUE_OF_LOV
make sure you add the "or clause" on your query otherwise the LOV will display the numerical value in the LOV and not the display value
If your LOV source column is a database value and you want to override it in essenece with your default value you can do something like this:
set a pl/sql process on load to:
select value into :P_ITEM_VALUE_OF_LOV from table;
or you could set your source used as "only when null" and set a default value within the element as well..

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

Define Default Values for Value Categories-reg

Hi Experts,
What will be the effect in cost tab in MO,if I dont maintain the Define Default Values for Value Categoriesin SPRO.Because by just maintaining Value categories and its cost element assignment,Iam getting the planned and actual cost in cost tab of order.
Pl clarify.
regards
KRISHNAN

hi..
Yes,u r right..without assigning default values also u can get the P/A cost in PM order.But,Suppose u have created 4 different value categories,ex-
Mech Spares
Elect Spares
Civil Spares
Maint Services
and u are assigning all these as default value categories,if ur maint order has only cost against mech spares it will show the cost incurred against that and cost against other value categories will be shown 0 in cost overview..
u can try it!!!

Setting the default value to taxonomy column in sharepoint 2010 using client object model

I am creating a metadata column and I want to set its default value in sharepoint 2010 using client object model. Can anyone help me?
My code for creating metadata column is as below:
            ClientContext clientContext = new ClientContext(siteUrl);
            Web site = clientContext.Web;
            List list = site.Lists.GetByTitle("LibraryName");
            FieldCollection collField = list.Fields;
            string fieldSchema = "<Field Type='TaxonomyFieldType' DisplayName='SoftwareColumn' Name='SoftwareColumn' />";
            collField.AddFieldAsXml(fieldSchema, true, AddFieldOptions.DefaultValue);
            //oneField.DefaultValue = "ASP.NET|4c984b91-b308-4884-b1f1-aee5d7ed58b2"; // wssId[0].ToString() + ";#" + term.Name + "|" + term.Id.ToString().ToLower();
            clientContext.Load(collField);
            clientContext.ExecuteQuery();

Hi,
Please try the code like this:
ClientContext clientContext = new ClientContext("http://yoursite/");
List list = clientContext.Web.Lists.GetByTitle("List1_mmsfield");
clientContext.Load(list);
clientContext.ExecuteQuery();
FieldCollection fields = list.Fields;
clientContext.Load(fields);
clientContext.ExecuteQuery();
Field f = fields.GetByTitle("mms");
clientContext.Load(f);
clientContext.ExecuteQuery();
Console.WriteLine(f.Title + "---" + f.DefaultValue);
//2;#A2|a0a95267-b758-4e4d-8c39-067069fd2eef
//1;#A1|641f5726-992c-41c8-9ddc-204a60b88584
f.DefaultValue = "1;#A1|641f5726-992c-41c8-9ddc-204a60b88584";
f.Update();
clientContext.Load(f);
clientContext.ExecuteQuery();
Console.WriteLine(f.Title + "---" + f.DefaultValue);
Best regards
Patrick Liang
TechNet Community Support

Report Parameter Default Value at runtime

Post Author: DMiller
CA Forum: .NET
Hi,
I need to be able to create new parameters at runtime and have been somewhat successful in this endeavor. I have one remaining issue that I am hoping that somebody can help me with. Let me explain.
When you create a parameter from within the Crystal XI designer, you are able to specify a number of default values that will display as a list box at runtime. Eg. ParameterName is MaritalStatus and default values are ("Married", "Single", "Divorced" etc). There is also the ability to specify the Default Value in the Value Options area of the screen. This value could be set to any one of the default values above - let's say that I set it to "Single". By setting the Default Value, this causes the Parameter Fields screen, at runtime, to "Select" the specific default value set above - in this case "Single", instead of showing "..." as the parameter value.
The default value setting in the Value Options is beneficial when you have reports that are usually run with certain parameter values and only occasionally these need to change. Instead of having to specify every parameter value, the user only has to set the ones that have not been defaulted or they want to change.
So, I have been successful in creating the parameters at runtime and successfully running the report. I have been unsuccessful in setting the "Default Value" as seen in the Value Options area. I have tried a number of properties on the report parameter object and have not found anything to set this.
Does anybody know how to set the "Default Value" as seen in the Value Options area in the designer at runtime?
Thanks for any help.

Post Author: JerryB
CA Forum: .NET
You have described my scnario to a tee. Did you ever figure out how to get the single default value that is available in the "value options" area when working within the Crystal Reports development environment. I am using VB.Net and have a nice report menu form and viewer but recently a user ask me to set the default value in one of my combo boxes and I have been unsuccessful in finding the correct property to use.

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to change default values in SCC?

Hi,
does anyone knows how to change the default values of the Sybase Control Center e.g.:
Activation Code Expiration (Hours) – indicates how long an activation code is valid. The default is 72 hours.
Within SCC the field is deactivated, it's changeable after creating a connection, but I need to set it within the connection template.
Thanks in advance, Christian

You're right, but we want to change the default setting of the template, to avoid this step.
Thanks, Christian

How do I set ical default values in lion?

I have just upgraded to Lion and so far, so good. In the new iCal, how do I set the default values? In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day. The new version defaults to an all-day meeting. I like the old way better, or best would be to have it as a preference.
Is there a way to set this that I'm not seeing?

Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Default values not appearing

I've been trying to create default values for a column during and Insert.
I've tried both setting the Default value in the Attribute tab of the entity and doing it within the create method, but neither of them populates my textfield.
Any ideas on what would keep it from taking on the default value?
thanks

Hi Harrison
You add a default value to the attribute in the Attribute Settings tab of the Entity. When you use the tester to run the application module and bring up a blank record using the Insert a New Record icon, you shoud see the default value in the item field.
Is this happening in your case?
Regards
Susan

Default values within in categories/taxonomy

Similar Messages

Maybe you are looking for