Defer persistence in create to the end of transaction..

How I defer the persistence "insert in the database" to the end of transaction instead of the EJBCreate Method ?
In the EJB Spec ...
"The container may create the representation of the entity in the database immediately, or it can
defer it to a later time (for example to the time after the matching ejbPostCreate<
METHOD>(...) has been called, or to the end of the transaction), depending on the
caching strategy that it uses."
Thanks

Hi Pablo -
In the 903 release, there is an attribute you can set for CMP entity beans that defines when the updates to the database occur.
The attribute is:
delay-updates-until-commit (true | false) "true"
This is defined in the orion-ejb-jar.xml file for your deployed application.
http://xmlns.oracle.com/ias/dtds/orion-ejb-jar.dtd
This should be covered in the 903 EJB Developer's Guide, see,
http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97677/dtdxml.htm#634210
Hope that helps.
-steve-

Similar Messages

Seperate DB Update not working at the end of transaction after polling DB

I am using DB Adapters in OSB(built using JDveloper) to poll a DB. I am doing logical delete on one of the field(PROC_RSLT) on table by updating read column to 0.
The issue is after I have done the polling and send the polled data to external party, external party send me a response which I have to again update to PROC_RSLT field.
1. This update is not working if my JCA adapter proxy service having "transaction" and "Same Transaction For Response " options are disabled.
2. When I enable the "Same Transaction For Response" option my DB update after external system with external system response is possible but logical delete(update to 0) on PROC_RSLT happen only after transaction is completed.
Since PROC_RSLT is not updated to 0 same record is polled by adapter multiple times. I want my PROC_RSLT to be updated as soon as it poll and also my DB update to happen with external system response
Can anyone help?
Thanks

Please refer section "Update a Field in the [Table_Name] Table (Logical Delete)" at below link -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_db.htm#BABEEBIH
Database Configuration: A status column on the table being polled must exist. If it does not exist already, you can add one to an existing table.
Support for Polling for Updates: Given that rows are not deleted with each read, it is possible to repetitively read a row multiple times. You must add a trigger to reset the mark read field whenever a record is changed, as follows:
create trigger Employee_modified
before update on Employee
for each row
begin
:new.STATUS := 'MODIFIED';
end;
Support for Concurrent Access Polling: Just as a single instance should never process an event more than once, the same applies to a collection of instances. Therefore, before processing a record, an instance must reserve that record with a unique value. Again, the status column can be used:
<operation name="receive">
<jca:operation
ActivationSpec="oracle.tip.adapter.db.DBActivationSpec"
PollingStrategyName="LogicalDeletePollingStrategy"
MarkReadField="STATUS"
MarkUnreadValue="UNPROCESSED"
MarkReservedValue="RESERVED${IP-2}-${weblogic.Name-1}-${instance}"
MarkReadValue="PROCESSED"
The polling query instead appears, as shown in the following example:
Update EMPLOYE set STATUS = 'RESERVED65-1-1' where (CRITERIA) AND (STATUS = 'UNPROCESSED');
Select … from EMPLOYEE where (CRITERIA) AND (STATUS = 'RESERVED65-1-1');
The after-read UPDATE is faster because it can update all:
Update EMPLOYEE set STATUS = 'PROCESSED' where (CRITERIA) AND (STATUS = 'RESERVED65-1-1');Your second aaproach should work -
2. With option ”Same transaction for Response” Enabled : PROC_RSLT is not updated to 0 as soon as record is polled. Instead it is updated to resultcode from CSM at the end of transaction. By that time DB adapter poll for multiple times as PROC_RSLT is still considered unread(not 0).Regards,
Anuj

How to open a file created at the server through form/report at client end

How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh Jain

One way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC

How can I create a hyperlink at the end of my video?

Hi everyone-
Is it possible to create a hyperlink (or clickable URL) at the end of my video in Premiere Pro? I'd like to be able to have some simple language to an end card reading, "To learn more, click here" with a hyperlink leading to a relevant website.
(I know there are ways to do this in YouTube with Annotations, but this isn't my question. This video will not be hosted on YouTube.)
Thanks!

As noted in the other reply, this isn't done through the video editor. It's something that needs to be available from the hosting service for the video ... and handled through that end. The sort of command that says "at this point in the timeline clicking on video gets this reaction ... ". So check with whatever "service" will be hosting it for the details of how they handle this, and then you would add the text into your video at the appropriate moment in "time" ... but it would actually be the command system of the hosting service that would have the actionable command.
Neil

Game created in Flash(SWF) how do you determine the end on one Captivate slide so you can proceed?

I know this discussion title is long, but here's the background...
We've created a game in Flash which created a SWF file and imported that SWF file into Captivate 5.5 as an animation.
Because it's a game, it can take someone 1 minute or 10 minutes to complete it.
I would like the slide to end when the individual playing the game ends (the SWF animation) and then move onto the next slide.
I've tried several different settings but nothing works.
Please advise.
Thank you,
Dave

I am no expert, and there may be better soltuions but as I see it there are two options:
1. Easy solution - Add a button in captivate to allow the user to manually navigate to the next slide (the button can be present the whole time allowing the user to nominate when they want to proceed)
2. More difficult solution: Turn the flash file into a widget. At the end of the game get the widget to set the variable rdcmndResume to 1
More information on creating widgets (and a framework for creating widgets more easily): http://www.infosemantics.com.au/widgetking/blog-2/

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

How to let sql server 2008 know the table created at front end in c#

How to let sql server 2008 know the table created at front end in c#

The best solution is to create table type and pass the DataTable as table-valued parameter. I have an article on my web site about this:
http://www.sommarskog.se/arrays-in-sql-2008.html
The full article is a bit of overkill for what you are doing right now, but just the few first pages should get you going.
Erland Sommarskog, SQL Server MVP, [email protected]

Creating index at the end

I am new to Reports 6i
How do I print the index at the end of a report (group above or group left). What I want is the key field and the starting page number. Thanks.

hello,
there is no built-in functionality for that. what you can do, is use a combination of a format-trigger and a temporary database table that stores the keys and the starting page and then create a layout for this in the trailer-section of your report.
regards,
the oracle reports team --pw

Need to create orders in bulk with one commit at the end

Hello,
I need to be able to create service orders or (compatible unit orders) in bulk where i call either 'BAPI_ALM_ORDER_MAINTAIN' or 'IM_SM_CREATE_ORDER' multiple times without commit. As far i understood after testing and reading documentation, it is not possible i always need to do commit after calling those function modules. Is there any other API in PM which can create orders in bulk where i can do a commit only at the end.
Best Regards,
Yevgen

Yevgen,
Check if ALM_ME_ORDER_CREATE would help.You would need to call CO_ZV_ORDER_POST to commit.If looking for CU order, have a look at /***/BAPI_CUORDER_CREATE.You may have to copy this and call the ALM_ME_ORDER_CREATE instead of the BAPI_ALM_ORDER_MAINTAIN, if looking to do a mass commit.
Hope it helps.
Regards
Narasimhan

Custom workflow... creating a new user from the End User's point of view

Hello I am trying to design a new Request for the end user so that they are able to create a new user. I am having problems with my workflow at this point and keep getting the error "Missing view id." Below is my code please help me out... I am very new to this so be gentle.
P.S. All my fields are named with " view.waveset.* " where * is either accountId or firstname or any attribute I need to set
<Extension>
<WFProcess name='End User Create New User' maxSteps='0'>
<Activity id='0' name='start'>
<Transition to='Create View'/>
<WorkflowEditor x='33' y='5'/>
</Activity>
<Activity id='1' name='Create View'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='type' value='User'/>
</Action>
<Transition to='Update View'/>
<WorkflowEditor x='107' y='81'/>
</Activity>
<Activity name='Update View'>
<Action process='Update View'>
<Argument name='type' value='User'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='Provision'/>
</Activity>
<Activity id='2' name='Provision'>
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='provision'/>
<Argument name='user' value='$(view)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='end'/>
<WorkflowEditor x='296' y='83'/>
</Activity>
<Activity id='3' name='end'>
<WorkflowEditor x='393' y='5'/>
</Activity>
</WFProcess>
</Extension>

I ran across the same error today. Since it's been over a month, I assume you've fixed it already or decided you didn't need it at all? What was your fix?
For me, I noted that in the sample directory, a similar "createView" call (in End User Anonymous Enrollment) also includes this argument:
<Argument name='viewId' value='User'/>
When I added that to my createView call, the "Missing view id" error went away, and the user are gets created.
I'm not entirely comfortable with the value specified, though; seems like view IDs should be more unique. I would have thought it should have been something like this instead:
<Argument name='viewId' value='User:$(accountId)'/>

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

Hello everyone,
This is Karie Garnier in British Columbia, Canada.
I'm new to FCPX.
I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
How can I select this invisible audio clip and delete it?

I think you could be right, that it's an old render file that's got stuck.
By the time I finished this movie my 500 GB hard drive was 99.9% full and
FCP started acting wierd, so I suspect you are right.
I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
glitch remains.
Can you please tell me:
a) How can I fix the old render file so that it is no longer stuck? ... and
b) How do I take a screen shot of the timeline?

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
Next, if necessary, continue with the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I am looking for instructions on how to create a personalized signature at the end of email messages

I am looking for a tutorial or instructions about how to create a signature at the end of emails....Name, contacts, disclaimer info etc...to be posted at the end of each email..?

http://hosting.com/support/email/create-an-email-signature-in-mac-mail/

Can I embed a link in my popcorn maker show? I'd like to include a game created online in the storyline or at the end.

My students are remixing the web to create a transmedia story. To incorporate the interactive element they created games on another site and we would LOVE to add them to the story line or the end somehow. Is there not a way to embed the link? I thought it would work the same as embedding a tutorial - same concept - including a link…? Help.

Okay, so I can't embed it…I want to be sure I'm including the URL in the most effective way, Do I just put the URL in a text box as I would any text or is there another way to put the URL in? Also can I make the link hot so the reader can just click it?

Defer persistence in create to the end of transaction..

Similar Messages

Maybe you are looking for