Define the start and end dates of an assigned academic period in fee calc.

Define the start and end dates of an assigned academic period
Message no. HRPIQ00ACCOUNTING132
Diagnosis
The academic calendar assigned to the top organizational unit does not contain a start or end date for the academic period (academic year and session) assigned to fee calculation period Z000.
System Response
The system will skip fee calculation period Z000 and continue processing with the next fee calculation period.
Procedure
1. Check which academic calendar is assigned to the top organizational unit.
2. Check which academic period is assigned to fee calculation period Z000. You check this setting in Customizing for Campus Management in the IMG activity Assign Academic Years and Sessions to Fee Calculation Periods.
3. In this academic calendar, create the start and end dates of the relevant academic period using standard time limit 0100 (standard duration of academic period) or a corresponding user-defined time limit.
For more information, see
Define Top Organizational Unit
Define Mandatory Time Limits for Academic Calendar
please give me the needful information to solve this problem.
Regards
Arun Rai

Arun,
Have you looked in the Student Accounting Cookbook
http://www.sdn.sap.com/irj/scn/advancedsearch?query=studentaccountingcookbook on page 13?
Page 1-18 will help you setup the Oranizational unit, the academic calendar and the modules.
Bev beck

Similar Messages

Calculate the working days having the start and end dates only

Hi,
Can BIP be able to calculate the working days having the start and end dates only? It is like the NETWORKDAYS function in Excel. (i.e. excluding weekends and holidays).
Thanks.

Not out of the box.
But You could extend your BIP functions
Look at here:
http://blogs.oracle.com/xmlpublisher/2009/05/bip_by_extension.html
Based on that what you need is similar to the following Java code:
http://objectlabkit.sourceforge.net/
regards
Jorge A.

Getting the start and end dates of the week

Hi,
I was stuck with a problem in getting the start date and end date of the week,i know the month ,week and year also,with these three values how can i get the start and end dates of a week.please help me
Thanks

There is no simple way. It has to be a math calculation.
There are several ways you can get the dates. First you have to know what day is January 1st and what day is december 31st for a particular year. Second you have to check whether the given year is a leap year or not. Based on the abvove information you should be able to find out what day is a particular date.
Hope this helps to get you started.
- Venkat Dhurjati.

Adding a summary column in a table which contains the start and end dates in the week

Hi,
I've got a DIMENSION DATE table and want to add in another column which shows the start and end date of the week.
See below, the new column is WEEKOFYEARTEXT.
Does anybody know how i may generate this column using SQL and using the existing columns?
Umar Javed

See: http://www.sqlusa.com/bestpractices/datetimeconversion/
DECLARE @Year INT = '2015';
WITH cteDays AS (SELECT DayOfYear=Dateadd(dd, number,
CONVERT(DATE, CONVERT(char(4),@Year)+'0101'))
FROM master.dbo.spt_values WHERE type='P'),
CTE AS (SELECT DayOfYear, WeekOfYear=DATEPART(week,DayOfYear)
FROM cteDays WHERE YEAR(DayOfYear)= @YEAR)
SELECT WeekOfYear, StartOfWeek=MIN(DayOfYear), EndOfWeek=MAX(DayOfYear)
FROM CTE GROUP BY WeekOfYear ORDER BY WeekOfYear;
WeekOfYear StartOfWeek EndOfWeek
1 2015-01-01 2015-01-03
2 2015-01-04 2015-01-10
3 2015-01-11 2015-01-17
4 2015-01-18 2015-01-24
5 2015-01-25 2015-01-31
6 2015-02-01 2015-02-07
7 2015-02-08 2015-02-14
8 2015-02-15 2015-02-21
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

How to find the start and ending dates of a quarter of a particular fiscal

Hi Experts,
I need a function mudule which returns starting and ending date s of a particular quarter of a particular fiscal year .
For Example: if pass 1 quarter and 2002 or 2 quarter 2002 it has to give me the star and end dates of that particular quarter na d fiscal year.
Please help me which is urgent for me.

Hi Kishan thanks for reply.
But given function module the 2nd one is full but it is giving me the calender year dates but i need fiscal yea dates.
fro example: if i pass 1 st quarte and 2006 it is to give me the 1st-april to 30-jun2006.
And need this quater starting date and ending date for as per USA fiscal year calender.
If u get any idea plz let me know.
thanks.
Dashmantha.

Query to find the start and end date of current quarter

I want a query to give me the start date and end date of current quarter
I don't want to use TRUNC and ROUND as the 16th day roundoff logic is not required.
Thanks in advance.

Hi ,
I'm quite sure that the year quarters are static.....
So , you can save them as records of a table , such as:
QRTY START_DAY END DAY
============================
1 1/1 30/3
2 1/4 30/6
3 1/7 30/9
4 1/10 31/12
The sysdate(day of the current quarter) must be between a start_day and appropriate end_day of the quarters, concatenated with the sysyear (year of the sysdate).
So , if the above table is called Quarters ...
then
select start_day , end_day
from quarters
where to_date(sysdate,'dd/mm/rrrr') between (to_date(trim((start_day||'/'||to_char(sysdate,'rrrr'))),'dd/mm/rrrr'))
and (to_date(trim((end_day||'/'||to_char(sysdate,'rrrr'))),'dd/mm/rrrr'));
[b]Result
START_DAY END_DAY
1/10 31/12
Regards,
Simon
Message was edited by:
sgalaxy
Message was edited by:
sgalaxy

SNP Planned order start and end dates are not calculated correctly

Hello SNP Guru's
The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
Seems like it should work as standard.
Am i missing something?
Thanks,
Mangesh

Dear Mangesh,
SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
banlance the capacity. What your expected beahavior happens in PPDS planning.
Claire

Product View - Start and End dates

Hi,
I have a material that is externally procured from a vendor to a location. In product view, I have few purchase requisitions. When i double click on it, it takes me to the details of PR. I am trying to understand what start and end dates of the PR are.
For some PRs, the start and end dates are same but for some there are is some times a day or two and even 3 in some cases.
I am wondering what makes the end date differ from start date.
There is a safety day's supply of 2.5 days
We have a transportation lane with transportation duration 23hrs.
Any of these play any role in the end date delay?

Hi,
Thanks for the reply. The vendor and the receiving location have a transportation lane defined.
What do you mean by the time duration that shows up in the T Lane corresponding to the inforecord?
Here are the times I see in transportation Lane;
Product Specific Transportation lane:
GR processing times (checked) : (No value defined) days
Planning Horizon: 0 days
Partner Horizon: 0 days
Horizon for Expctd receipts: 0 days
Horiz. Fut. Aval. Whse Stck: 0 days
Planned Delivery time: (No value Defined)
Means of Transport
Tsp. duration: 23 hrs
Bucket offset: 0.5
Period factor: 0.5
and no other times defined.
Are any of these effect the delay?
My ECC is EST and the timestream is EST. Should I change the product view (also my own data) to EST or UTC??
I have a product that has no delay between the start and end dates. The difference I see between the one that I am having problem (the start and end dates are apart ( I'm calling it bad one) by atleast a day) with and the one that has no delay(I'm calling this good one) between the start and end dates is the "Planned Delivery time.
The good one has 1 day and the bad one has nothing defined.
Does this make any difference?
Thanks.
Edited by: Raj G on Jul 17, 2008 3:36 PM

Hyperion Planning dynamic forms based on start and end date across years

Hi All,
I have a requirement where i need to be able to view a form showing periods across years that are dynamically built depending on the start and end dates. If i have a start date of 01/11/2009 and an end date of 31/7/2013 i want to be able to view a form that shows all of the periods (Jan,Feb etc) in a form that is driven by these dates, in addition it will need to show the actual scenario up to the current month and the forecast from the current month to the end date. So basically if a user inputs the start and end dates the form will display the relevant periods driven by these dates.
Any tips very much appreciated!

Hello,
This is difficult to realize, but you can get quite far with a workaround. The first question is, where do you want to input your selection of time periods? Assuming you have a webform with the complete timeline in months and years and you type in the start period and end period.
Webforms have the option to suppress rows and columns.
This can be extended with option of empty cells or not empty cells.
You will need to apply your creativity on this.
Put every month-year combination in a column and add the suppression.
Calculate the timeline between start period and end period with a dummy member, so data exists for these and columns will show.
Maybe you will need to copy the required timeline into a separate version for this, to avoid having periods which were outside the selection and still have data.
I hope these hints help a bit in this challenge.
Regards,
Philip Hulsebosch
www.trexco.nl

Period start and end dates

Hello Experts,
Can some tell me where we enter the start and end dates of a posting period in a fiscal year which is a year dependent and a non-calendar year?
For ex: Jan 2008, I have to mention the start and end dates of the fiscal period January, because ours is not a calendar year and so the jan 1st and Jan 31st do not correspond with the January's posting period dates.
Regards,
Sriram

Hi Sriram,
As Vj suggested, go to transaction OB29. Then select the fiscal year variant and upon selection the variant, click on "Period". This will open up dialog box asking for the fiscal year for which you want to configure. Enter the fiscal year and hit enter. This will open up the calendar table to enter the period entry which has 4 columns: Month, Day, Period and Year Shift.
Make sure you are entering the correct Year Shift. Logic for the Year Shift is as follows.
+1 if the fiscal year is later than the calendar year
-1 if the fiscal year is before the calendar year.
0 if the fiscal year is same as the calendar year.
One example of year shift:
Say, if you are configuring the fiscal year 2007 (April 2007 to March 2008), then January 2008 is your 10th period. Here you hare to enter -1 in Year Shift Column only for January to March (10-12 period) as your fiscal year 2007 is less than the calendar year 2008.
Hope this helps.
Pls. award points if this is useful.
With Regards,
Chirag

Prorating Wage Type in IT0014 based on start and end dates

Hi experts
I have a scenario wherein I want to prorate a Wage type according to the start and end dates in Infotype 0014. I have tried setting the Processing Class 10 to 1. When I do this, the system prorates according to the start date. Example:
If the start and the end dates for wagetype 4000 are: 24.05.2014 to 31.12.9999, amount is 1000 and the payroll period is May'2014, then amount calculated is 258.06, which is correct.
If however, the start and the end dates for wagetype 4000 are: 01.05.2014 to 24.05.2014, amount is 1000 and the payroll period is May'2014, the system generates the amount 1000, which is incorrect.
How can we handle this? Please help.
Regards
Divya Tiwari

Hi Divya,
Please check the below mentioned pcr's in your system.
UW14 and X011
Check above mentioned pcrs in subschemas INBD,ZNAP and share me the existing pcr's screenshot in your system.
Regards,
Haranath

Start and End Dates check

Hi,
I have a requirement to find the list of persons who have overlapping dates.
Each person can have many start and End Dates, but only one row that has a NULL end date, the active record. If the start and end dates are overlapped, like in the example below, the second row should have a start date of 24-DEC-2006 and not 22-DEC-2006. Is it possible to list those persons who have overlapping dates/gap in the dates.
Empl_ID Start Date End Date
12345 01-JAN-2006 23-DEC-2006
12345 22-DEC-2006 13-JAN-2007
12345 14-JAN-2007 NULL
Any help is greatly appreciated.
Thanks!

Hi Patrick
I like where you are coming from. I hope you don't mind but I have extended your idea slightly to add in a PARTITION BY clause to make sure we look at records for the same person. Also, if we LAG to get a previous record shouldn't we LAG the END_DATE and compare it with the current START_DATE?
LAG(END_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)
Doing this, then the results would look like this:
Empl_ID Start Date End Date Lag Date
12345 01-JAN-2006 23-DEC-2006 NULL
12345 22-DEC-2006 13-JAN-2007 23-DEC-2006
12345 14-JAN-2007 NULL 13-JAN-2007
This would give the SIGN an issue because in the first record the LAG would be NULL and in the last record the END_DATE would be NULL. So it looks like some manipulation of NULLs has to take place as well which I will deal with later.
SIGN((LAG(END_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)) - START_DATE)
Anytime the difference between the Lag Date and the Start Date is positive this means this is an overlap which means we do need to look for any variance where the SIGN is 1.
Using the other function, we could use LEAD like this:
LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)
Doing this, then the results would look like this:
Empl_ID Start Date End Date Lead Date
12345 01-JAN-2006 23-DEC-2006 22-DEC-2006
12345 22-DEC-2006 13-JAN-2007 14-JAN-2007
12345 14-JAN-2007 NULL NULL
which when combined with SIGN becomes: SIGN((LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE)) - END_DATE)
This time you would be looking for the SIGN to be -1
Personally, I think I would prefer the LEAD function because a) there would always be a START_DATE, and b) we could replace all of the possible NULLs with the SYSDATE to get a final calculation like this:
SIGN(NVL(LEAD(START_DATE,1) OVER (PARTITION BY EMPL_ID ORDER BY START_DATE),TRUNC(SYSDATE)) - NVL(END_DATE, TRUNC(SYSDATE)))
Based on the current date being 17-NOV-2009, you would now get this result:
Empl_ID Start Date End Date Lead Date
12345 01-JAN-2006 23-DEC-2006 22-DEC-2006
12345 22-DEC-2006 13-JAN-2007 14-JAN-2007
12345 14-JAN-2007 17-NOV-2009 17-NOV-2009
Best wishes
Michael

How to input my own Validity Start and End Dates in ME21N

Hi All,
I have to change the Validity Start and Validity End date in Addiitional Data Tab of ME21 transaction( PO Create ) using default Customer Values.How Can i accomplish it?
I have used the BAdI ME_PROCESS_PO_CUST and implemented it, I have coded in the method PROCESS_HEADER.First I retrieved the data using get_data( ) method, changed the values with Customer Values and called the method set_data( ).
However my validity start and End Dates and not changing.
Even in ME21N if I create the PO with my own Validity Start and End dates, and go to ME23N to display the created PO, still in the additional data tab, the start and End dates are current date and Next date respectively.why its happening?
Thanks in advance

Hi,
Can you please let us know in which business scenario this is required.
SAP has provided separate functionality of Outline Agreement for considering validity period.
If you let us know the business scenarion some solution/workaround can be suggested.
Regards

Text Variables to show Start and End Date of Fiscal Year Period

Hi,
I am creating a query that has user enter a starting fiscal year period and posts information by Fiscal Year Period going back 14 periods. I am able to put the fiscal year period in the heading for all periods, but would also like to add the start and end calendar day for each listed period. Can that be done using a replacement path text variable or is that something more for a customer exit variable?
Thanks in advance for any thoughts provided.
Bill

Hi,
This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
S_VMUCMN is my selection variable
S_TXTCMN_M12 is my text variable calmonth-12
S_TXTCMN_M0 is my text variable for selected calmonth.
WHEN 'S_TXTCMN_M12'.
    IF i_step = '2'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
        CLEAR l_s_range.
        " First day of the selected month
        CONCATENATE loc_var_range-low '01' INTO l_calday.
        CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
          EXPORTING
            date      = l_calday
            months    = 12
            signum    = '-'
          IMPORTING
            calc_date = l_calday.
        l_s_range-low = l_calday+0(6).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Thus, in KF header you have to put the two text variable to display the complete period.
Hope it helps,

0Person to 0employee loading, how to handle start and end date

Hi
I need help on some basic understanding of time dependent master data object.
In my scenario i am loading 0employee and 0Person from R/3. I need to update 0employee from 0person.
0employee
BEGDA            ENDDA             PERNR        Position....................So many fields
10.10.2001     10.10.2004        8000123    Associate
11.10.2004     10.10.2008        8000123    Consultant
11.10.2008     31.12.9999        8000123    Senior Consultant
0Person
BEGDA            ENDDA             PERNR         City....................So many fields
10.10.2001     10.10.2003        8000123      Singapore
11.10.2003     10.10.2007        8000123      Tokyo
11.10.2007     31.12.9999        8000123      Newyork
As the begining and end date are different i can't simply read City from 0person into 0employee. If i go for checking the city for the start and end date in 0employee, i will get multiple records ( If try to get city for 0employee's first record, i will get 2 city Singapore and Tokyo).
Please help me out how to handle this ...... i think i am missing somelink somewhere
Thanks
Tripple k

Hi Srini
Yes i need to have parallel flow for both and in the cube where my reporting will be on monthly basis i need to read these 2 master data and get the required attributes ( considering last/first day of that month as per the requirement).......but i am just wondering this is common scenario....while there are so many threads written for populating 0employee from 0person......don't they have such requirement.....
Thanks
Tripple k

Define the start and end dates of an assigned academic period in fee calc.

Similar Messages

Maybe you are looking for