Delay and bad lag!! Need some fix ;((

My stats:
Line state
Connected
Connection time
0 days, 2:20:47
Downstream
5,952 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
9.4 dB / 23.0 dB
Line attenuation (Down/Up)
44.0 dB / 28.0 dB
Output power (Down/Up)
19.8 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
68019 / 0
CRC Errors (Down/Up)
3 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
2

Just a quick note here Continually disconnecting the HomeHub does not help your connection & Please allow some time as the mods are very busy but will respond to your question shortly.
On a side Note the lag your speaking of is it in game lag or something else.
Kindest Regards
IceZaroth
BT Community Helper

Similar Messages

  • I bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

    i bought an iPhone 5 in Brazil, but i dropped it in the floor and now i need to fix it. is it possible to make in New York and how much would cost?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • Attention Apple and Ebay - Safari NEEDS to fixed ASAP

    I am getting SOOOOO tired of this. Apple and Ebay need to sit down and figure out these issues. I sent this to Apple and, HOPEFULLY, they will start listening. I just can't deal with this anymore. I can't stand Firefox but I am being forced to use it. Here are the issues I am experiencing that I forwarded to Apple. I am trying to tell ebay, but Live Chat has stopped working, too.
    1. To all the people still experiencing the "t" issue in Live Chat....CAPITAL T works fine. You have to look like you are shouting at the ebay rep (and explain why you look that way), but you will be able to type normally with the letter t. I figured this out by accident over a year ago. I keep a text edit file with the explanation as to why I am "screaming" at them because its a paragraph and takes too long to type.
    2. Live chat does not work AT ALL. I am never connected to the server. The kicker??? As of last night, it was no longer working in Firefox. So, I am now downloading Camino. Hopefully it works because I need to contact them ASAP (I bought an iMac and the seller is a no show).
    3. The following are all ebay (not apple) issues, I am sure:
    Playground searching does not work unless you are in the annoying, flash snapshot view.
    Sometimes, I will want to search All Categories or Just Comp&Netwrk and it automatically jumps to a specific category no matter what I do.
    My feedback rating was 220 and now it reads 219. No, I do not have a negative or neutral (I have 100%) so my rating should not have gone down.
    When I tried to pay for an item last night, ebay takes you to a page that says you have to log into Paypal. But when you get there, the Login button is just an IMAGE. I had to go to Firefox to pay.
    4. Ebay pages fail to load. I have to keep hitting refresh (sometimes 15-20 x's) to get the auction page to load.
    Lots of others are experiencing listing issues. I use GarageSale so this is a non-issue for me. Apple, I love Safari, so much so that I don't even WANT other browsers on my computer, but it is IMPOSSIBLE to use ebay without SEVERAL other browsers. This is ridiculous and unacceptable. We need this FIXED. I have experienced these issues (some longer than others) for over 2 YEARS. Please, meet with ebay and repair the app.

    I agree, but it is not just ebay. I do alot of searching and many sites won't connect the first time or i get "can't find the server' but less than a minute later I get it. This should not be and I cannot download the new safari I have 10.4.11 and it won't let me. Also, I can't get me.com or .mac any more directly. I used to, but my mac will not recognize the passwords now or the site. I have to go through the apple site although I have paid through next april. I am ready to scream when I have paid for one of the most expensive home computers out there.

  • We need some fixes and an update!!

    so far with my HTC Merge i cant update kindle app, cant download new widgets and it doesnt have very many perosnalization options, if you see this post verizon please please please release an update with fixes.

    by update and fixes i mean gingerbread 2.3 update with fixes.

  • Front Row on mac mini: We need some fixes

    Been having fun playing with my mac mini and trying it out as a home media center, to network and play all my shared media that's on my iMac G5 and enjoy it on my 32" LCD TV and stereo system.
    There are three major glitches that keep this from working perfectly, and hopefully Apple will have a fix for these soon:
    1. When you want to view your shared pics as a slideshow, Front Row is not able to remember and use the music settings that you have assigned to your albums in iPhoto. It can only use music for the slideshows that originates on the mini. There is no choosing from the Shared Music in the slideshow preferences, and therefore no option to, like on an iPod, to have your slideshow music setting set to "From iPhoto".
    2. Front Row keeps insisiting and changing even saved settings for slideshow playaback, always reverting back to using Jesu Joy...from the Sample Music folder, and displaying images with the Ken Burns effect. I have tried changing these setting on both computers's iPhoto settings, and yet Front Row resets them, if not immediately, upon the next opening.
    3. I cannot get any movie that I did not purchase off of iTunes to play through the networked connection. It seems that it cannot stream anything much longer or bigger than an iPod sized music video or movie trailer. I couldn't even get the TV show episodes I have in iTunes to work. Trying to play a full length movie resulted in FrontRow hanging forever and me having to Force Quit or restart. Many of the full length movies I had ripped from DVDs to mp4s I did at a larger size than the 320 iPod screen size, so that when I played them back on a large display they would look better. These movies are formatted right and do play in iTunes as well as on my iPod, and from my iPod to TV with the AV cables, but not through the wireless networked mac mini.
    If we can get these things straightened out, it is a pretty great home media device.

    Jim,
    Isn't Front Row awesome and full of promise! I just needed a new mini and got this to play with in the mix. Looks like I need two mini since this one is going under the TV.
    Now to your glitches. Remember front row is simply an agent that listens for remote commands and sends them to other applications to do the heavy lifting/dirty work.
    1. I think this is really a problem with the version of iPhoto that has the photos. I'm not a guru of iPhoto, but I know of no way to change the defaults for a new slideshow. All the shows I create (either in iPhoto or via front row requesting a slide show on the fly) initially default to Automatic Ken Burns and the Jesu.... soundtrack ( a great piece of music no doubt, but woefully overplayed at the moment for my tastes.) I have no problems once I go into iPhoto and set the slide show prefernces the way I like and quit/re-start iPhoto. I don't know if there is another way to save the settings for a slide show, but quitting seems to do the trick for me.
    2. I'm not catching anything new here. Are you sure your settings were saved - (i.e. could you start iPhoto on "source" computer and play the slide show immediately and get the music and settings you changed?) Sorry to question you but I just can't think anything else here. Front row is simply asking iTunes (either locally or remotely) to play the show or create one if it does not exist. Perhaps the way it is asking is different for you - I have a weird mix of software levels (iPhoto 5 on my remote mac and iPhoto 6 on my mini) - but I cannot reproduce the symptom you mentioned to try to see what happened.
    3. This could be a network issue (or a too much stuff to fit in the sock.) What is the data rate for one of the movies that causes you issues? Is that rate more than your network will allow? Front Row doesn't seem to be that graceful at the moment when network pauses or fails. It will wait a long time to time out the operation and I get to watch that circular throbber a lot. Open up the Activity Monitor (it's in Applications / Utilities folder). Play the movie locally from a hard disk. Look at the Disk Activity tab at the bottom. It will give you an idea of how much data needs to be read from disk to play the movie. Then change to the network tab. Go to the other computer and play the movie. Return to the first computer and see how much data manages to get sent. (It's best to quit all other applications when measuring - this tool shows all activity on the mac - not just the movie...) I have a lot of movies that have way too much data to send wirelessly. I'm going to upgrade my home switch to gigabit and wire things to that to serve my needs.
    Good luck - let me know if I misunderstood anything - but I'm guessing front row already does what you want and there are some workarounds or other issues of learning how to set things up to give you that pretty great home media device you want.

  • Widget creation on Flex builder and related problems - need some help

    Hi all.
    I am trying to create a widget like application and it seems
    I have made a mistake. As you know, desktop widgets are like small
    stickers, they do not appear on taskbar and can be hidden or
    docked.
    The problem is that I created an AIR application using Flex
    Builder 3 Beta and now I cannot find how to make that application
    behave like custom-shaped window. My app appears on Windows taskbar
    and I don't want it. When I drag the window (which is a custom
    shape) it shows that nasty dragging rectangle around it.
    As far as I found out (and tried it) I need to use cod like:
    var initOptions:NativeWindowInitOptions = new
    NativeWindowInitOptions();
    initOptions.systemChrome = NativeWindowSystemChrome.NONE;
    initOptions.type = NativeWindowType.UTILITY;
    to hide my window from the taskbar. But it seems I cannot use
    such a code for class mx:Application. Or can I (would be grateful
    for some idea)?
    The main question is:
    if I want to migrate my app to that NativeWindow based
    solution - then NativeWindow is not an mx class and I cannot find
    how I will use Flex Builder Design mode to arrange my GUI elements.
    Is it somehow possible to wrap my mx:Application inside
    NativeWindow and do not have to migrate the design from mxml files
    to pure ActionScript?
    The second issue - if I want to use some kind of subforms -
    like widget settings window - when I move that window with the
    mouse, it is being clipped to the region of my Application. Does
    that again mean that I need to use NativeWindow for creating such a
    "Widget settings" dialog window?
    Thanks for any ideas (and especially for useful links and
    examples :-) )

    Hi all.
    I am trying to create a widget like application and it seems
    I have made a mistake. As you know, desktop widgets are like small
    stickers, they do not appear on taskbar and can be hidden or
    docked.
    The problem is that I created an AIR application using Flex
    Builder 3 Beta and now I cannot find how to make that application
    behave like custom-shaped window. My app appears on Windows taskbar
    and I don't want it. When I drag the window (which is a custom
    shape) it shows that nasty dragging rectangle around it.
    As far as I found out (and tried it) I need to use cod like:
    var initOptions:NativeWindowInitOptions = new
    NativeWindowInitOptions();
    initOptions.systemChrome = NativeWindowSystemChrome.NONE;
    initOptions.type = NativeWindowType.UTILITY;
    to hide my window from the taskbar. But it seems I cannot use
    such a code for class mx:Application. Or can I (would be grateful
    for some idea)?
    The main question is:
    if I want to migrate my app to that NativeWindow based
    solution - then NativeWindow is not an mx class and I cannot find
    how I will use Flex Builder Design mode to arrange my GUI elements.
    Is it somehow possible to wrap my mx:Application inside
    NativeWindow and do not have to migrate the design from mxml files
    to pure ActionScript?
    The second issue - if I want to use some kind of subforms -
    like widget settings window - when I move that window with the
    mouse, it is being clipped to the region of my Application. Does
    that again mean that I need to use NativeWindow for creating such a
    "Widget settings" dialog window?
    Thanks for any ideas (and especially for useful links and
    examples :-) )

  • I am the biggest "Newb" on this site,  and I really need some help please..

    Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
    When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
    That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
    UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
    Edited by: user11033020 on Apr 14, 2009 11:41 AM

    As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
    Forms
    The Community Feedback forum isn't meant for product-related questions (as it says in the title).
    Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

  • My used QS G4 came with 10.1 and now I need some answers...

    I just purchased a uzed QS Power Mac G4 at my local apple dealer in his annual used mac stuff after the boxing day sale. EDITORIAL COMMENT: In selling these used macs the dealer ship staff always behave as if they are selling stuff out of the trunk of a car in a back alley.
    I wanted to add this mac to my mac museum.
    Please allow me to ask a few ????
    This mac had 10.1 and OS 9 installed.
    What is the ***** cat name for 10.1? Sort of shows you the age of this machine albeit for me it has potential inexpensive expansion.
    After trying this OS X I installed TIGER.
    However in my haste I misspelled the name of my little house. What's a fast way to correct the spelling error without using terminal? Or, do I just do an archieval install?
    The installer also zapped OS 9 because it said, oh I can't remember what it said.
    I assume I can re-install 9 after OS X installation or do I have to install OS 9 first and then OS X TIGER ?
    I have some fav midi/audio programmes that were never ported to OS X or those programmes are still my fav.
    Also, can I install/use a web cam or iSight ?
    Any recommendations for a web cam ? The iSight is horribly expensive.

    From Apple's history museum:
    MacOS X Public Beta: Kodiak
    MacOS X 10.0: Cheetah
    MacOS X 10.1: Puma
    MacOS X 10.2: Jaguar
    MacOS X 10.3: Panther
    MacOS X 10.4: Tiger
    MacOS X 10.5: Leopard
    Changing the user's shortname is a bit complicated. The easiest solution is to download the freeware utility ChangeShortName from www.macupdate.com. Do NOT simply rename the folder - this will not work.
    OS 9 may be installed at any time regardless of whether OS X is already installed or not. You will need a bootable OS 9 installer CD with version 9.1 or higher. You can install OS 9 on the same volume with OS X or you can partition the hard drive and install OS 9 on one partition and OS X on the other. This particular arrangement makes it possible to switch between operating systems using OPTION booting.
    You can use a web cam or iSight with that computer. I don't use either so I can't offer a recommendation. However, I'm partial to using Apple peripherals when it comes to "specialized" items because they tend to have fewer compatibility problems. This document will help you identify compatible peripherals: http://docs.info.apple.com/article.html?artnum=25403.
    HAPPY HOLIDAYS!
    Kappy
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Safari and amazon - toxic - needs a fix

    My Safari browser seems to have become entwined with Amazon.com in a way that is destroying functionality on the Amazon website. I've confirmed that the problem is not on Amazon's end, and Apple Support has been unable to resolve the problem. I believe the problem is that something has attached itself to Safari that is linking it in a toxic way to Amazon. Anyone ever hear of this? Check it out: After browsing Amazon briefly the links stop working and I'm given a generic "sorry we're having a problem but we're working on it" screen, after which I can no longer access Amazon unless I restart the computer.
    And most strangely, even if I start with the secure (https) address, I end up with Safari telling me the website certificate is not valid. The certificate turns out to be www.amazon.com.br.  This is Amazon in Portuguese, for the Brazilian market! Today I was completely unable to log in, although there was nothing wrong with my account. The Amazon rep got me running again, but suggested I switch to Firefox for Amazon, which he claims is more compatible.
    So far I've emptied the cache and deleted Amazon cookies many times. I've also reset the system management controller. Any other suggestions? Should I bite the bullet and reset Safari?
    Is there a way to look into the background of Safari and see if amazon.com.br is hiding there somewhere? Is there a scan I could run to see if there's malware that's causing the problem?
    And lastly, should I simply download Firefox in order to browse Amazon only?  I'd really like to solve the problem, not put a bandaid on it.
    Thanks for any wisdom. I browse Amazon a lot so this is really a pain.

    I missed the fact that you're running 10.6, so you don't have a Recovery partition.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • HT1296 lost part of programs on pc for itunes and other essentials, need to fix or download again

    have lost a drive for itunes and won,t work, tried to download itunes again but won,t work ?

    You need to follow these instructions: http://support.apple.com/kb/HT1923

  • Deleted standard class and BAdI. Need to re-generate/re-import.

    Hello SAPients,
    My buddy was working on the implementation of a BAdI. He arrived to a point where he couldn't save the Implementation because the system showed the error "Interface doesn't exist". He thought that deleting the implementation and re-creating it he would be able to save the implementation but then the system requested for an Access Key to modify the object, he requested the Key to the Basis guys, they provided it and my buddy deleted the implementation (that's what he thought). Actually, something weird happened and he deleted the class and the BAdI. Now, we are having trouble with short dumps in standard TCodes. The question is, is it posible to re-generate/re-import this standard objects? How?
    Thanks in advance for your kind help.

    I already told him that.
    BAdI: FTR_CUSTOMER_EXTENT.
    Class: CL_EX_FTR_CUSTOMER_EXTENT.
    We have too many developers working on this system, if we restore it from a backup we'll lose their work.
    Any other idea?
    Thanks.

  • Multiple same artists and albums missing, need some help pleas

    Hi,
    I just bought a Creative Zen mp3 player and for some reason, when I edit the name and info of my songs (artist, genre, album...ect...) , my player won't pick it up properly. I can have 2 or 3 different "Beatles" under artist, yet, they are spelled EXACTLY the same way. (capital letter, space, eveything is the same)
    Now I used to have the same problem with my Creative Zen V Plus but I was always able to make it work after doing some copy & paste while editing the tracks info. This time, it's not working.
    My second problem is the one that really bugs me the most. When I select certain artists on my player, some of the albums are missing. Ex: I select "Beatles" in my artists list and then I'm expecting to find all the albums but there are only 2 showing. Yet, if I go in the albums list,there're all gonna be there. And?as I said, the names & different info are all spelled properly. EVERYTHING IS THE SAME ! I spend alot of time editing my tracks info because I want everything to be organised perfectly on my player and it's getting really frustrating.
    Anyone has a solution? thank you so much !

    I am having a very similar problem. I had the problem, was told about Media Monkey, organized everything through Media Monkey, deleted all my songs off my Zen X-Fi 6GB and reloaded my songs. Again songs are missing. Here is the interesting thing. Media Monkey shows 273 items in the playlist and my Zen shows 273 songs So where are they?
    I too am getting VERY FRUSTRATED! Please let me know if you find a solution!!
    Thanx!

  • Home media server for mac, that you can also get to remotely.  Any ideas?  I am out of space on my macbook pro hard drive and appletv.  Need some sort of media server for delivery to macs, ipods, ipads, etc.  Any suggestions?

    Hi,
    I have been using my macbook pro as a home media server, hosting most content on the macbook with ipod touch, ipads, and appletv streaming/sharing content.  I have run out of space on both the macbook pro and the apple tv and am looking to moving the content to a home media server.  Any thoughts/suggestions?  I'd like something that I can access remotely too.  I have an old slingbox and also have a static IP address.
    Any thoughts/suggestions would be most welcome!

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • Combined bar and line graph: need some advice

    Hi,
    I'm builing a small app for a customer. The basic functionality is showing the bar chart and the line (see the figure attached), and now I want to show
    the area above the line in another color. This is the cost saving for the customer. Can I do this? And how would you suggest me to achieve this!
    Can I also show the big dot as seen in the figure?
    Thanks!

    _Faust wrote:
    Hi,
    I'm builing a small app for a customer. The basic functionality is showing the bar chart and the line (see the figure attached), and now I want to show
    the area above the line in another color. This is the cost saving for the customer. Can I do this? And how would you suggest me to achieve this!
    Can I also show the big dot as seen in the figure?
    Thanks!
    Although I believe that graph would be possible by banging on the graphs hard enough, but it would pretty easy to render that image using a picture control since rectangles, lines, text, and circles are supported.
    The link I included above will take you to a thread devoted to Picture related threads.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I have a powerbook g4 running mac ox 10.4.11 so, im having serious issues because i have lost all the programs like office and word, and i really need to fix it because is my work  tool, how can i fix it? and i also want to know how to upgrade

    my powerbook to leopard 10.5 a least to get a better used.

    You can also use the freeware NeoOffice http://download.neooffice.org/neojava/en/index.php
    NeoOffice is equivalent to Microsoft Office. It can open Excel files, Word files & PowerPoint files. You can also create these types of files that can be opened by PC users.
     Cheers, Tom

Maybe you are looking for