Delete Customer Master Data OBR2
Hi
I'm using LSMW to import data. I would like to delete it afterwards. Transaction OBR2 which is in spro Financial Accounting (New) -> Accounts Receivable And Payable -> Customer Accounts -> Master Data -> Delete Customer master data.
But it does not delete the sales are segment, it also does not allow me to delete general data if sales segment exists.
Can anyone please let me know if there is another way around this? Any other way to delete this test data???
Thanks in advance
Hi
Please go through the SAP documentation on how to perform deletion of customer master data.
This may help you in executing the function correctly.
<b>Delete Customer Master Data</b>
In this activity, you delete the master records for customers by using a program. Only use this program in the test phase.
Note
The company code for which master records are to be deleted, may not yet be flagged as productive.
Only master records for accounts which do not have any transaction data may be deleted.
Requirements
The general customer master data is only deleted for customers who are not also created as customers in Sales and Distribution.
Activities
Delete the master records for the required company codes.
Additional information
Refer to the SAPF019 program documentation for further information on the program.
Deleting Master Data
Description
This program deletes master data in Financial Accounting and is designed for preparing the system for productive startup. It deletes:
Customer master data
Vendor master data
G/L account master data
You can run this program in three different ways:
1. Deleting general master data (in G/L accounts in one chart of accounts)
2. Deleting master data dependent on company code
3. Deleting general master data and master data dependent on company code
For each deletion run, you can specify whether or not the system should take into account the deletion flag in master records ("Delete per deletion flag only"). If it takes into account deletion flags, it uses the following standard logic:
Option 1: The "All areas" deletion flag must be set.
Option 2: The "Specified co. code" deletion flag must be set.
Option 3: It is sufficient to have the "All areas" deletion flag set.
Note: Deletion blocks are always checked at general data and company code-dependent data level. If there is a block at company code-dependent data level, then the general data is not deleted either. The deletion block takes precedence over the deletion flag.
General master data in Financial Accounting can also be used in other SAP applications:
Customer master data in Sales and Distribution
Vendor master data in Purchasing
G/L accounts as primary cost elements in Cost Accounting
The program deletes the following:
Change documents for master data
SAPscript text files
The following data is deleted for customers:
o General master data
o Bank details
o VAT registration numbers
o Addresses
o Classifications
o Credit management: across control areas
o Credit management: centrally
o Unloading points
o Tax indicators
o Contact persons
o Licenses
o Partner function limit
o Shipping data
o Master data in the company code
o Dunning data
o Linked data
The following data is deleted for vendors:
o General master data
o Bank details
o Contact persons
o VAT registration numbers
o Addresses
o Classifications
o Master data in the company code
o Dunning data
o Linked data
The following data is deleted for G/L accounts:
o General master data in the chart of accounts
o Names in the chart of accounts
o Key word list in the chart of accounts
o Master data in the company code
o Sample accounts, if selected
For customer and vendor contact persons, the addresses are not determined from central address management until the actual runtime. Therefore differences can arise as to the number of addresses in the detail log between the test run and the update run.
Automatic worklists for customers and vendors are also deleted with the general master data. Matchcodes are always deleted.
You may have to fix the number ranges after the program run.
The system makes changes to the database in the update run only. It will then also write a system log entry for documentation.
Requirements
General master data can only be deleted if no other application makes reference to the account. Use the resetting programs from
Sales and Distribution (customer master data)
Purchasing (vendor master data)
Cost Accounting (G/L account master data)
If you want to delete only general master data, master data dependent on company code cannot have been created in Financial Accounting.
If you want to delete master data in a test company code, master data dependent on company code cannot have been created in any other company code except the test company code. The productive indicator cannot be set for the company code.
If a customer or vendor is referenced by another customer or vendor (for example, via fiscal address or alternative payee), you can only delete the referenced master record by deleting the referencing master record at the same time.
Furthermore, you can only delete master data in Financial Accounting if no transactions have been posted to the corresponding accounts. If there are transaction figures in one of the selected accounts, you have to manually access and run program SAPF020 (reset transaction data from a company code) before you can delete that account.
Output
The log lists every table which is processed in the program selection.
You can also create a detail log for each account type to find out why certain data cannot be deleted. The detail logs show you what other company codes and applications use the data and how customers and vendors are linked to one another.
Note
Since deleting or displaying even smaller volumes of data can result in runtime problems, you should run this program as a background job. Currently, the program individually deletes matchcodes for each master record in the database. Several match code IDs refer to each matchcode. This can place a considerable load on the database.
You cannot delete transaction data in individual accounts.
Important: The archiving programs in Financial Accounting are designed for the productive system.
If you are running this deletion program for the first time, then you must start program SAPF047 before deletion in order to generate link information.
I hope this may be of help to you
Good Luck
Hari
Similar Messages
-
I want to delete customer master data.There is no transactions posted yet.Also let me know how to archive.
When i goto OBR2 to delete syatem says LINKS STORED INCOMPLETELY.
THE MESSAGE SOWN BELOW :
Links stored incompletely
Message no. FG166
Diagnosis
Customer/vendor links are to be taken into consideration when archiving or deleting customers or vendors. To do this, link data from the database is required which in this case has not yet been put together.
System Response
Neither archiving nor deletion was carried out.
Procedure
Run program SAPF047 in the background at a time when no customer/vendor changes are being made. This program puts together the link information in table KLPA so that links (for example, specification of an alternative payee or dunning recipient) can be taken into consideration during deletion or archiving. You can find more information in the documentation for SAPF047.
PLEASE HELP !!!!! -
How to delete the master data of a Customer created in a SALES AREA?
Hi All,
I've deleted a Customer (master data) by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
ThanksHi,
I dont think you can delete a customer. you can market it for deletion in XD06.
for deleting customer master data you have to setup an archiving project.
Also check the similar thread
doubt in obr2
Hope it helps you.
Regards,
Sats. -
Error during create CR for MDGC "Enter a relevant role for creation of customer master data"
Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks -
Dual Control for Vendor/Customer Master Data
We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?
Dear,
No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
I hope this helps.
Mauri -
MATCHCODE ON PAYMENT TERMS IN CUSTOMER MASTER DATA
HI,
Could you please help me on the point described below ?
When I use the Transaction XD03 on customer master data, the matchcode on the field "payment terms" ( in the sales area data) only displays the current value of the field.
It is not possible to have all the possible values; only the value written in the field is displayed in the matchcode; It is also the same thing if i use the transaction XD02.
The others values are displayed if I delete the current entry...
Could you please explain me how I could retrieve all the possible entries ( in display mode) of the field without deleting any entry ?
NB : it seems that This is linked to the sales area; when I display the same customer on different sales areas, the result is not the same. On some sales areas, I can have the other possible entries...
Thanks in advance for your help.Hi,
I remember there is a way to do this, but forgot. Please discuss with your developers. They should be able to do this for you. Its a small thing on the screen which pops up, but I forgot what is that. -
Changes in customer master data
Hi
Is there a different way (apart from using IDOCS) to identify changes (create/update/delete) in customer's master data to the following Condition Class:
BPAR
TESTRF
DEBI
KLIM
Best Regards
TalHi
I want to know if all the changes in customer master data objects: BPAR,TESTRF,DEBI,KLIM
are recorded in the system and where?
is it relevant to customization?
Best Regards
Tal -
PDF attachment to Customer Master Data
Hello!
I have a requirement to create a attachment to the customer master data (TCODE FD02 for example) in background. In online mode, there is a icon on the top left that allows you to attach files.
I want to a attach a pdf file. Is this possible in background mode, like a batch input or a function module?
ThanksI did not take action in this instance. Moderator action is usually quite clear - we leave a message explaining what we've done. I can guess what has happened here, but I can't say for sure. You posted a question, it was answered with a one liner "Search the forum with "SHD0". " This indicates that you could have answered the question yourself with a little research, or it was a basic question. .
(If it had been moderating it - in my area of expertise - I would have locked the thread entirely, or rejected it).
However, as further discussion shows, there was more meat on the question than at first appeared
But you are quite wrong with regards to moderator action regarding points. If a question is a FAQ for example, then awarded points will be removed. If an answer violates the rules of the forum, points will be removed. If a user has violated the rules to an extent that they may be about to deleted, as final sanction points may be removed. If members try to cheat the point system, they'll have points remvoed.
Moderators do considerably more than monitor forums for silliness and abuse.
If you have a complaint about moderator action, please raise it in the suggestions and comment forum. We don't always get it right, and we are open to discussion.
matt
Edited by: Matt on Jul 30, 2011 7:03 AM -
Outbond interface programme to upload customer master data.
Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
<b>ALE IDOC</b>
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
ARCHEIVING Customer Master Data
Hello Gurus,
How to archieve a customer master data(ALL) which has been marked for deletion.Hi,
Check these notes:
Note 75340 - Archiving of customers with SD dependencies
Note 77670 - FI - Master data archiving Delete deletion flag
Check in tcode AOBJ for object FI_ACCRECV, that you need archive before these objects with records related with the debitor:
FI_DOCUMNT
FI_MONTHLY
RV_LIKP
SD_VBAK
SD_VBKA
SD_VBRK
I hope this helps you
REgards,
Eduardo -
Deletion of master data for 0CS_ORDER
Hello Friends,
I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
When I try to do this, I get the msg that some master data could not be deleted.
This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
In dev, I have deleted the master data using SE14 for tables P, S , X, T.
My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
What can be other possible ways??
Please share your opinions.
Many Thanks,
VA
Edited by: Vishwa Anand on Sep 2, 2010 5:36 PMDefinitely Yes.
It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
So do not use SE14 for deletion of MD. This is very specific to use.
You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
Hope this is clear for you.. -
Deletion of master data with / without SID
Hi Experts,
Client have requested for master data clean up.
Requirement:
"Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
Steps to be taken:
1. emptied/deleted content of all the cube.
2. delete data from master data
Help required:
What will be impact of deleting master data with SID when DSO data is not deleted.
What if i choose without SID option for deletiing master data
Regards
Suresh KumarHi Suresh,
Deleting master data is one critical job and ned to be very care ful.
First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
If you are deleting the TD and master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
Go thru the below thread, this gives you lot if info on MD deletion.
[Re: SID Tables] -
Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5
Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
LeenaHi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod. -
Hi,
How can i see the report of customer master data..
Like for sale order it is va05...
So how for a customer master data?
AshisHi
there is no standard report for that...
go to SE16... enter table KNA1 -- for all customers please note this gives all customers in your client
KNB1 -- for company code wise list
KNVV -- for sales area wise list..
after entering the table press enter ... give the selection criteria.. and execute.. this will fetch you the list of customers
Muthu
Edited by: Muthupandiyan on Feb 21, 2008 12:31 PM -
Retrieving Dunning Clerk's name from Customer master data
Hi all,
I have to retrieve the dunning clerk's name in report ZRSD0001 (Customer Master Data Report).
There are standard methods to call the subroutine to retrieve the texts for some field like the bank statement text:
PERFORM TEXTFIELD_CALL(RSAQEXCE) USING KNB1 'KNB1' 'XAUSZ' TEXT_KNB1_XAUSZ.
This works perfectly. But it fails when I use the same method to retrieve the dunning clerk's name:
PERFORM TEXTFIELD_CALL(RSAQEXCE) USING KNB5 'KNB5' 'BUSAB' TEXT_KNB5_BUSAB.
So any other standard subroutine that I can use instead of using a sql statement myself ?
Thanks.Hi,
Why do you want to use a standard routine for this?? If you know the customer number(KUNNR), Company Code(BUKRS) and Dunning Area(MABER) You can get Dunning clerk(BUSAB) from KNB5 and using this BUSAB and BUKRS you can go to table T001S to get the SNAME which is Dunning Clerk's name.
Thanks,
Kavitha
Maybe you are looking for
-
Annoying rss update every time i switch to next unread item
eariler in snow leopard i read all my new rss messages in quicker way now if i use a cursor up or down to read new messages it sticks for a few seconds before it switches to new message. i launched activity monitor and saw it updates rss channel ever
-
Hi Guys, I have a big problem when instantiating PROXY object in ABAP for sending data through my Web Service. Context: A Program calls a Mondule Function that calls afterwards a Webservice. Realization: in SE80, I created my Webservice correctly. an
-
Captivate 5.5 - SCORM Project won't run after Captivate 7 installation
Good afternoon, I had completed a Captivate 5.5 project for a few months and as of about a month ago I have had Captivate 7 installed on the machine. Due to some widgets that are implemented in the project that only run in 5.5, I have not used Captiv
-
On starting Bridge CS3 (2.1.1.9) in OS 10.5.4 the Bridge menus display along the top of the screen but no window appears. Selecting Cmd-N does nothing, but if I select Cmd-H from the Bridge drop-down menu to hide the application, as expected it shrin
-
How to print on new page as employee changes..
Hi all, I am writting every employee payslip one below the other, now at the time of printting i want one employee on each page, please tell me how to resolve this problem thanks, gaurav