Delete data from application server
Hi All.
I have created file in application by using OPEN DATA SET, I need to delete from application server after some validation , how to delete?
Please guide me.
Thanks in Advance.
Hi,
DATA FNAME(60) VALUE 'file'.
OPEN DATASET FNAME FOR OUTPUT.
OPEN DATASET FNAME FOR INPUT.
IF SY-SUBRC = 0.
WRITE / 'File found'.
ELSE.
WRITE / 'File not found'.
ENDIF.
DELETE DATASET FNAME.
OPEN DATASET FNAME FOR INPUT.
IF SY-SUBRC = 0.
WRITE / 'File found'.
ELSE.
WRITE / 'File not found'.
ENDIF.
The output appears as follows:
File found
File not found
Use cane Also Use Function Modue: EPS_DELETE_FILE
Regards,
Gurpreet
Similar Messages
-
Process Chain - Delete File from Application Server
Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcoshi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya. -
Deleting file from application server
can any one tell me how to delete file from application server?
Hi,
Use statement
delete dataset 'tmpfile.txt'.
\tmp\file.txt is the file path on application server which you want to delete.
Regards
Sailaja. -
T-code for delete file from application server
Hi all!
Please, has any t-code for delete file from application server? For upload exist CG3Z, for download has CG3Y. And for delete? Has anyone?
I need to delete file from application server in QA system and i don't want to create a program for this because i will need to transport a request from DEV to QA.I don't have contact with basis team.
The FM EPS_DELETE_FILE support directory name with max 60 char. My dir. has more than that. I need a transaction for this.
Anybody know if this transaction exist? -
Delete data from archive server
Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
StefanHi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra -
How to upload data from application server
Hi,
please help me out in uploading the data from application server which is a tab delemited file into an internal table.
Thanks
kumarhi,
Use this sample code as an example.
table declaration
tables: mara.
*data declaration
data: begin of it_lfa1 occurs 0,
vendor like lfa1-lifnr,
land1 like lfa1-land1,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
end of it_lfa1.
selection screen
selection-screen: begin of block b1 with frame.
parameters: p_file type rlgrap-filename obligatory.
selection-screen: end of block b1.
at selection screen
at selection-screen on value-request for p_file.
*& start-of-selection
start-of-selection.
perform transfer_file using p_file.
perform write.
*& Form transfer_file
text
-->P_P_FILE text
form transfer_file using p_p_file.
data: l_message(30) type c.
***opening dataset for reading
open dataset p_p_file for input in text mode encoding default message
l_message.
if sy-subrc ne 0.
message i001(zerr2) with p_p_file.
endif.
*******transferring data from file to app server.
do.
read dataset p_p_file into it_lfa1.
if sy-subrc = 0.
append it_lfa1.
clear it_lfa1.
else.
exit.
endif.
enddo.
*******closing dataset
close dataset p_p_file.
endform. " transfer_file
*& Form write
text
--> p1 text
<-- p2 text
form write .
loop at it_lfa1.
write:/ it_lfa1-vendor,
it_lfa1-land1,
it_lfa1-name1,
it_lfa1-ort01.
endloop.
endform. " write
Thanks
Aneesh. -
How to get data from application server
hi experts,
when i load data from application server(.csv file) to ODS, data all goes one column.
in infopackage exterdata tabstrip i have given the below values.
escape sign is "
data separator is ,
separator for thousands is ,
my sample data:
"1010000";"A410";"03.2008";"113.5704531"
"1010000";"A410";"04.2008";"93.1146410"
any ideas..
SiriHi Siri,
You should look in the T.Code :RSCUSTV1
BW:Settings for Flat File
Thousand separator
Dec. point separator
Field separator
Field delimiter
Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
This will resolve your issue
Regards
Hari -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant -
Download 350MB of data from Application Server to Presentation server
i want to Download 350MB(Around 2.5Million record of Table BSEG) of data from Application Server to Presentation server..
i have tried with the transaction CG3Y and program using open dataset,read dataset,close dataset,ws_download...but went in vain,,,ended with TIMEOUT ERROR..will OPEN DATASET 'path' FOR OUTPUT FILTER 'Compress' be helpful
..please help me ..its urgent..you can do the FTP with Unix commands..
initially connect to the application server by using command
FTP <app server ip>,then it willl ask for username and password... after successful connection you can use the following commnads to transfer file
lcd <destination path name>(set the dest path)
cd <source path>(set the sorce path),
get <filename to be transfererd>( do the transfer)....
You can do same with ABAP code also, for this you need to use some function modules like..
FTP_CONNECT ( to establish the connection)
FTP_COMMAND ( to execute the commands like cd, lcd get,put)
finally FTP_DISCONNECT to close the open connection...
for further details refer standard program RSFTP002,RSFTP003....
reward points if helpful... -
Error while loading data from application server
Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
PraveenIt looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian -
Dump while downloading data from Application Server File in 4.6 system
Hi,
When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c.
When we faced similar kind of issue in ECC version, we have used the statement, Ignoring Conversion Errors.
Please let me know how to handle this situation in 4.6 System.
Thanks for your inputs.
Regards,
PhaniHi All,
I am sorry. My question was wrong. It should be while uploading data from internal table to application server, if there are any special characters, it is going to dump.
I will let you know the dump details and code at the earliesst.
Sorry and Thanks again for your prompt response.
Regards,
Phani. -
Delete file data from Application Server
Hello,
How do we delete data from the file on application Server.
For deleting the file, we use DELETE DATASET <filename>.
If we want to delete only the data and not the file, how to address it?
Please let me know.Hi , please check the following links, maybe using the truncate dataset can be helpful.
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb3c7f358411d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/d5/c3f58e9f3b11d2960000a0c9308b1f/frameset.htm
Another way could be get the file name and store in a var , then delete the file and afterwards
create a new one with the same name as stored in the var.
Thanks,
Walter Oliveira. -
How to delete file from application server(Unix)
Hi All,
Using the below code downloading a file from application server(Unix) to client machine. I want to delete the file from application server once it is downloaded to client
We work on Forms 11.1.1.4.0 and Oracle DB 10g. Client machine are Windows 7.
BEGIN
IF webutil_file_transfer.AS_to_Client
(clientFile => Name_In('global.g_file_name')
,serverFile => ls_AppServer_Loc)THEN
message('Data exported Successfully');
ELSE
message('File download from Application Server failed');
END IF;
EXCEPTION
WHEN OTHERS THEN
message('File download failed: '||SUBSTR(sqlerrm,1,200));
END;
I have search for solution on OTN. Few suggested to use HOST.
Can any one help me how to use Host() built_in to delete the file.
Thanks,
MaddyCan any one help me how to use Host() built_in to delete the file.
Host('/bin/rm <complete file path>'); -
Delete file from application server
Hi,
Can any one tell me how to delete a file from application server?
Thanks,
Rahul.Basic question, please search for available information.
Thread locked.
Thomas -
Uploading the data from Application server to Database
Hi,
I am trying to upload tab delimited file from application server into database.
I have upload the file from presentation to application server by CGZ3
and i am able to see file in app server with #s and it appers in application server as
10140#A#E#120#abcd#
10146#M#P#300#a.b#
10152#M#P#200#dat123.com##
140#A#P#300#blicksat123.com#
10140#A#E#260#cust1at123.com##
And my notepad records looks like
10140 A E 120 abcd
10146 M P 300 a.b
10152 M P 200 dat123.com
140 A P 300 blicksat123.com
10140 A E 260 cust1at123.com
I am using open data set and read dataset to read the file as shown below
DATA:
l_htab TYPE c, " Horizontal tab
l_line(100) TYPE c. " Content in the file
l_htab = cl_abap_char_utilities=>horizontal_tab.
Open dataset
OPEN DATASET pp_afname FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
DO.
Read dataset
READ DATASET pp_afname INTO l_line.
IF sy-subrc EQ 0.
SPLIT l_line AT l_htab
INTO fs_file-carrid
fs_file-autoind
fs_file-commtype
fs_file-resptime
fs_file-smtpaddr.
APPEND fs_file TO pt_afile.
ELSE.
EXIT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDDO. " DO.
CLOSE DATASET pp_afname.
ELSE.
MESSAGE 'Problem in opening the App.Server file' TYPE con_msgtyp_i.
ENDIF. " IF sy-subrc EQ 0.
Load the data to the database
PERFORM load_data_to_database USING t_afile.
When i am trying to upload it is taking me to dump and the errpr analysis is like
"The program attempted to interpret the value "26 0 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible."
Any suggestions on this
Regards
VEnk@Hi,
Thats the line feed character. After reading the application server file, use this
data: lv_feed type c value CL_ABAP_CHAR_UTILITIES=>CR_LF.
loop at itab.
replace all occurrences of lv_feed in itab-field with space.
modify itab.
endloop.
Vikranth
Maybe you are looking for
-
I need help to remove the wrong email on my Iphone. the represnter who set up my phone put in the wrong email, and now I can't down loand apps on my phone because the apple ID does not match
-
How to format external harddrive for mac use!
Should I use My new external hard drive right out of the box for back-ups, or re-format it? Its a 1 (TB) drive?
-
Error message when trying to log in to authorize my computer?
Why will my password not work when I want to authorize my computer with Adobe Digital Editions when I can log into the forum?
-
Oracle Services Does Not Start
Hi, I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle
-
OK, got a new Zen Micro, installed the software as directed on a WinXP Pro machine, SPa, and I reboot. I plug the thing in, and it says that the device is not detected correctly, and it does not work. I reinstall drivers, move to another port, play w