Delete Transaction Data from date to date

Hi All,
we want to delete transactional data from date to to date
is there any way to delete data from date to todate?
We are aware of following tcodes
OBR1- Reset transaction data
CXDL - Delete transaction data from ledger
But there is no period/from date to date option available
Example:
we are in 2010 now we want to delete data from 2005- 2007 and we don't want to archive
Thanks in advance
Regards,
MS

Hi Eli,
Thanks for the reply,
Yes, you are right its not right to delete data based on the period... but we have such kind of typical scenario
Let me get some other opinion
Regards,
MS

Similar Messages

Updating data from PSA to Data Target

Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
Ganesh

If this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Adobe offline form with capablity to read data from a local data base.

Hi ,
We have customer requirement for a offline Adobe form which will be used by Sales rep, this form when saved to the local hard disk is required to read data from another local data base available in the laptop and prefill a few fields in the form .
Is this requirement technically feasible using Adobe forms?
Thanks
Srikanth S

Well may be it's possible because if you go to the Data View in ALD and create a new Data Connection --> OLEDB database --> Build --> It gives you various options for connecting to different DBs but frankly speaking I have never tried it.
Check the ALD help for more information on the topic.
Using LiveCycle Designer > Working with Data Sources > Connecting to a data source > To create a data connection to an OLE database
Chintan

Weblogs: Cycle Count Inventory Date: From IM inventory date to WM inventory

Dear All,
I have updated new weblog on the common problem for physical inventory.
When any organization plans to go for implementing the warehouse management; it has major concern about the physical inventory process, particularly last physical inventory date.
More details are available on this weblogs:
/people/community.user/blog/2007/10/04/cycle-count-inventory-date-from-im-inventory-date-to-wm-inventory-date
<b>Your feedback/comments are most welcome, <u>Please write on the weblog page, not in this thread.</u></b>
Regards
Arif Mansuri

Dear All,
Here is my previous weblog, Your comments will work as tonic for me ), so leave your comment on both of these blogs.
/people/community.user/blog/2007/05/04/physical-inventory-in-material-management
Enjoy SAP..
Regads
Arif Mansuri

Determine previous date from the selection date

Hi Guys,
I need to get a previous date from the selection date mm/dd/yyyy
Eg:
Selection date is 02/28/2008
Sol- -02/27/2008
Selection date - 03/01/2008
Sol- 02/29/2008
Selection date - 04/02/2008
Sol-04/01/2008
If i do ofset -1 in query ....it goes -1 month. In Exit if i do Sys-datnum -1. It works but not in case for Feburary month. Since 2008 year has Feb (29 days) but for 2007 (28 days)
Regards

Hi,
Problem is i have a 0Date restricted to a variable and if i do offset-1 to that variable it goes previous month not the date.
I dont have 0CALDAY in my cube. Can i do in the UserExit.
If i do sy-datum-1. Will it work?
Because the FEb one is the main problem
Regards

Extracting data from ms sql data base

Hi Experts,
we have a requirement of extracting data from MS SQL data base,could any one pls help me with the approach to extract data
from ms sql data base(actually we have to extract the data from PRIMAVERA i.e the back end data base is MS SQL data base and the application is built on java)so we have got two options one is using ud connect and the other one is using PI(XI).i came to know the two approach have based on differenct methods,pull and push mechanism.and also for PI,it can be extracted using
real time data acquisition property in dtp and for db connect it don't support real time data acqusition.
so pls guide me,which mechanism would be feasible to extract the data from PRIMAVERA to SAP BI.and can you suggest with methods is more efficient.
Thanks in advance.

Hi thanks for the reply,
initially we tried with db connect,but our Bi system(oracle) is mount on unix OS and the Primavera(MS Sql DB)is on windows OS.so we could not found the data base shared library once if the DB client is installed on the application server.so we are working around with the other possibilities,so can you suggest me which could be favarable in our case.
Thank You.

Can we delete the requests from Infoobject master data

Hello all,
we load master data process chains everyday. now when when we right click on the attribute "Manage" then there are lots of requests there.
Can we delete the older requests from there?
Does having lot of requests there slow down the performance?
Thanks in advance

Ravi,
Yes we have transactional data also loaded. So you mean I cannot delete the requests from Infoobject ?
So can we use the given FM and delete master data lets says once a week ?
I am really confused about this. I tried deleting some of the request from ATTR (Right click on attr and then manage -> select request and delete) and it did actually get deleted so was that wrong thing to do ?
Thanks for reply

Delete a Row from a Nested Data Table

Hi... Good day...
I have a dataTable nested within another DataTable.
I want to delete a Row from the nested DataTable on clicking a remove Button at the Last column of the Nested DataTable, Jus in the browser.
How to accomplish this using JavaScript?
Here is my Code Snippet..
<h:dataTable value="#{myListBean.rpts}" binding="#{myListBean.parent}" var="item" headerClass ="header" rowClasses = "whiteRow,grayRow" cellspacing="0" cellpadding="4" border = "0" id = "dataTable">
<h:column>
     <h:graphicImage id="expand" value="static/images/plus.gif" onclick="showNested(this);" rendered="#{item.schedImgurl=='static/images/scheduled.gif'}"/>
      <div id="#{item.rptId}">
      <h:dataTable id="orderLines" binding="#{myListBean.child}" value="#{item.scheduleList}" var="schedItem" style="display: none;">
      <h:column>
       <h:outputText value="#{schedItem.scheduleID}" style="display:none;" />
         <f:facet name="header" >
               <h:outputText value="Scheduled Criteria"/>
          </f:facet>
         <h:outputText value="#{schedItem.scheduleCriteriaName}" />
         <span onMouseOver="JavaScript:showScheduleTooltip(event,'#{schedItem.toolTipCriteraia}')" onMouseOut="JavaScript:hideTooltip()">...</span>
      </h:column>
      <h:column>
       <f:facet name="header" >
      <h:outputText value="Frequency"/>
      </f:facet>
       <h:outputText value="#{schedItem.scheduleFrequency}" />
      </h:column>
      <h:column>
       <f:facet name="header" >
       <h:outputText value="On"/>
       </f:facet>
       <h:outputText value="#{schedItem.scheduleStartDate}" />
      </h:column>
      <h:column>
        <input type="button" value="Remove"onclick=" Remove();"/>
      </h:column>
</h:dataTable>
</div>
</h:column>
</h:dataTable>Whatz that I need to do inside the Remove() JavaScript Function ?

Ram_J2EE_JSF wrote:
How to accomplish this using JavaScript?Using Javascript? Well, you know, Javascript runs at the client side and intercepts on the HTML DOM tree only. The JSF code is completely irrelevant. Open your JSF page in your favourite webbrowser and view the generated HTML source. Finally just base your Javascript function on it.

Unable to export data from Web Access Data Sheet in Sharepoint to local excel or access file

Greetings and good morning.
I'm going to start off in broad terms with this question because I'm not 100 percent sure what information to provide.
Long story short, we've got a Web Access Data Sheet list hosted in a Sharepoint 2010 environment. It is accessed and used by multiple people throughout the day. It contains several thousand line item entries. I'd call it a large data sheet.
I think the size of the data sheet is casuign some instability in the list. I'd like to be able to export a defined range of data from the list into a local excel or access file. After that, I'd delete the stuff on the Access list to improve performance.
But...when I attempt to use the Sharepoint Action bar to export - Excel locks up/crashes. If I try to export to Access, I get a similar issue.
Any ideas? Could anyone begin by telling me what other information is required?

Hi,
If you would like to export data from Access Web Database in SharePoint 2010, you could go to Design With Access page in Settings. The url in my environment is http://sp/tt/_layouts/accsrv/ModifyApplication.aspx . Then choose the Table and export it to Excel
or Modify it in Access.
Regards,
Rebecca Tu
TechNet Community Support

How to send data from 4 different data sources to one ODS

Hello Gurus,
There is a transaction called KSB1 in R/3.
It has data related to cost center , cost element, G/L .
In BI, i need to transfer the data from these Data sources to one ODS.
Can any body give me some idea.
Points will be awarded for any kind of response .
Thanks .
Anu

Hi Rupa..
In your requirement some data sources (Cost centre, Cost element) are master data sources.
They are available as info Objects in BI (Content).
So there is no need to create ODS on these.
But the general scenario for creating ODS from multiple data sources in case of Transaction documents
Like :
PO header, PO line items...
For this the Pre-requisite is to have common fields between these data sources (eg PONo).
Hope this gives idea for u....
Cheers...
Varma

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Funds management cube getting data from 4 ods, data not seen in cube

Hello all,
I am working on funds management cubes (0PU_C02 and 0PU_C03). These two cubes get data from like 7 or 8 ODS. Can someone tell me which are the ODS which feed to respective cubes. I have the mappings done but i am getting very confused.
In the ods 0PU_O44 there is RLDNR for Ledger and I can see that data in ODS but when i run load to cube I dont see the ledger data (its direct mapping there are no routines or rules).
Is there any sequence with wihic we have to load the data?
Thanks
Message was edited by: Raj M

Hi Raj,
I was going thru the forums who has knowledge in Public sector when i came accross ur forum.Can i get your email id..i have some questions to ask regarding student administration.
thanks.

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Loading data from one master data attr.to another master data in production

Hi all,
I have two two masterdata attr info objects A and B( have time dependent attr.).
according to businees requirement i have included 8 objects of A TO B to make them as time dependent.
all reports are designed on infosets only having these A and B ,some other ods objects.
I have done mapping in infosets and made changes in queries according to changes.i when moved from dev to quality and checked all infosets and queries all changes are reflecting in infosets and queries in quality.
*QUETIONS * :
1. while executing queries i am getting 'no data' in the reult of query output.
2. How can get 8 fields data from A to B, because A has lot of data for that 8 fields in A in production
Regards,
Chinna.

Hi chinna
first of all maintain the master data to attributes and these attribute converted into Navigational Attributes
in this way u can get master data at query output
thanks
Muralidhar Reddy.P
Edited by: Muralidhar Reddy P on Dec 24, 2008 9:31 PM

How to change column "Date" from "Text" to "Date-Time" in Document Library.

How to change column name "Date" from "Single line of Text" to "Date and Time" in Document Library.

Hi,
If you would change column type, you might need to re-create column.
If you would like a text column to display in date format, you could refer to the links below:
http://sharepoint.stackexchange.com/questions/45774/how-to-convert-date-field-in-single-line-of-text-using-calculated-columns
http://yasuanantha.blogspot.com/2008/06/to-convert-text-column-to-date-column.html
Regards,
Rebecca Tu
TechNet Community Support

Delete Transaction Data from date to date

Similar Messages

Maybe you are looking for