Deleted aggregate stills tries to be configured

I had an aggregate of aggr1 made up of e1000g1 and e1000g3.
To remove aggr1 I did the following
dladm remove-aggr -d e1000g1 1
dladm remove-aggr -d e1000g3 1
dladm delete-aggr 1
rm /etc/hostname.aggr1
The switch has the port channel configuration removed as well
I created /etc/hostname.e1000g3 and rebooted the system. An ifconfig shows that e1000g3 has the correct ip address, but it is not passing traffic. When the system boots, it appears to keep trying to plumb as seen below.
Any idea what I'm missing that would cause this?
Apr 11 12:22:17 foo111 ip: aggr1: DL_ATTACH_REQ failed: DL_BADPPA
Apr 11 12:22:17 foo111 ip: aggr1: DL_BIND_REQ failed: DL_OUTSTATE
Apr 11 12:22:17 foo111 ip: aggr1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
Apr 11 12:22:17 foo111 ip: aggr1: DL_UNBIND_REQ failed: DL_OUTSTATE
Apr 11 11:17:14 foo111 mac: [ID 736570 kern.info] NOTICE: aggr1 unregistered
Apr 11 11:34:57 foo111 ip: [ID 349634 kern.error] aggr1: DL_ATTACH_REQ failed: DL_BADPPA
Apr 11 11:34:57 foo111 ip: [ID 450574 kern.error] aggr1: DL_BIND_REQ failed: DL_OUTSTATE
Apr 11 11:34:57 foo111 ip: [ID 392697 kern.error] aggr1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
Apr 11 11:34:57 foo111 ip: [ID 721282 kern.error] aggr1: DL_UNBIND_REQ failed: DL_OUTSTATE
Apr 11 11:38:28 foo111 ip: [ID 349634 kern.error] aggr1: DL_ATTACH_REQ failed: DL_BADPPA
Apr 11 11:38:28 foo111 ip: [ID 450574 kern.error] aggr1: DL_BIND_REQ failed: DL_OUTSTATE
Apr 11 11:38:28 foo111 ip: [ID 392697 kern.error] aggr1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
Apr 11 11:38:28 foo111 ip: [ID 721282 kern.error] aggr1: DL_UNBIND_REQ failed: DL_OUTSTATE
Apr 11 12:02:30 foo111 ip: [ID 349634 kern.error] aggr1: DL_ATTACH_REQ failed: DL_BADPPA
Apr 11 12:02:30 foo111 ip: [ID 450574 kern.error] aggr1: DL_BIND_REQ failed: DL_OUTSTATE
Apr 11 12:02:30 foo111 ip: [ID 392697 kern.error] aggr1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
Apr 11 12:02:30 foo111 ip: [ID 721282 kern.error] aggr1: DL_UNBIND_REQ failed: DL_OUTSTATE
Apr 11 12:22:17 foo111 ip: [ID 349634 kern.error] aggr1: DL_ATTACH_REQ failed: DL_BADPPA
Apr 11 12:22:17 foo111 ip: [ID 450574 kern.error] aggr1: DL_BIND_REQ failed: DL_OUTSTATE
Apr 11 12:22:17 foo111 ip: [ID 392697 kern.error] aggr1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
Apr 11 12:22:17 foo111 ip: [ID 721282 kern.error] aggr1: DL_UNBIND_REQ failed: DL_OUTSTATE
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
Setting netmask of aggr1 to 255.255.255.0
INFO: thr#17 Plumb VNIC aggr1, we need to configure it
INFO: thr#17 Plumb Error: java.io.IOException: Plumb aggr1:runCmd:1
INFO: thr#17 Plumb VNIC aggr1, we need to configure it
INFO: thr#17 Plumb Error: java.io.IOException: Plumb aggr1:runCmd:1
INFO: thr#16 Plumb VNIC aggr1, we need to configure it
INFO: thr#16 Plumb Error: java.io.IOException: Plumb aggr1:runCmd:1
FINE: thr#21 aggr1:IPConfiguration:__local/com.sun.hss.domain:name=localhost-global-GlobalZoneControlDomainServer,type=Server:Alert OK:false:aggr1:DHCP: CLEAN (66215)
FINE: thr#23 DataAverage aggr1_outputBytes initialized : min weight = 580 scale factor = 1024
FINE: thr#23 DataAverage aggr1_inputBytes initialized : min weight = 580 scale factor = 1024

No, it didn't work out
The only response I could get is "File not found..." (or similar) just before kernel decompresses. And it hangs there.
I guess, I've effectively killed bash and nothing would be executed without it.
So, this machine got reinstalled from 0.8 alpha3 and is running again... Few questions do remain but, for another thread.
Anyway, it would be nice to know what actually happened to the system with user nobody deleted. Anyone!?
(meantime I've leartn a lot on user nobody, but couldn't find the sequence of events after it is deleted.)
Cheers,
mladen

Similar Messages

  • SCCM 2012 - Deleted advertisement still trying to get installed on servers

    During 2012 upgrade I managed to deploy the SP1 Cumulative update 4 - server update - package to a group of servers that don't have the configuration manager installed.
    I deleted that deployment from the server group but the package is still trying to get installed multiple times a day leaving a random folder on D: (Example: D:\25234HDF344D6H72K) 
    Please advise on how I can sort this out, the volume is filling up with new directories 

    To clarify and verify, did you deploy the package or the software update?
    Either way, Garth's point is valid.
    Jason | http://blog.configmgrftw.com

  • Trying to install Creative Cloud Desktop on windows 8.1, I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1

    I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.

    Error Code 1: "Failed to install" | Creative Cloud Desktop :
    https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.

  • I have the first version iPhone.  Recently,  I tried to edit several old notes.  I open the note, touch the trash can, touch "delete note", and it goes back to my applications screen; I go back into Notes, and the note supposedly deleted is still there.

    I have a first version iPhone.  Having problem with Notes.  There are four notes that I want to delete and have tried everything I can think of; they won'y move to trash; I delete the text to a blank page but when I go backa to notes the title is still there and it opens with the undeleted test etc, etc.  And it won't save new notes.  What can I do other than get a newer iPhone?  Notes on my iPad works just fine.
    Pat

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1725 I've followed the advice to re-commence downloading an interrupted video but I still keep getting an error message. I then deleted the video to start again but the original is still trying to download in the iTunes app. Any ideas what I can do? Tha

    I started downloading a video from iTunes last night on my ipad when my wifi dropped out. Once I'd reconnected my wifi I tried to recommence the download but it kept saying that download was not available at this time. I then tried the steps in iTunes help but got the same message. Finally, I deleted the video (the part that had downloaded) from my video section and tried to start the download again from the start. However, when I go to iTunes it's still trying to download the original and even this morning I'm still getting the error message. Any ideas what I could do to get the video downloaded? I currently only have access to my ipad. Thanks.

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • SunMC still trying to contact an object after delete

    Hi Everybody,
    we're using Sun MC 3.6.1 and we have a host dans we don't want to monitor anymore. I've deleted the object in the Sun MC console but when we snoop the network interface of the host, we see that SunMC is still trying to contact the host at regular interval on the port 1161 (the port that the agent was) and also for ping requests.
    Does anybody have an idea of what's wrong? The hosts object is not present anymore in the console.
    Thanks
    Daniel

    HI Friend,
    Try to sign your device out from iTunes Store and iCloud. Then, Sign in again.
    It also looks like you turn Restricions on. So, check Settings >> General >> Restricions and turn Restricions off. You probably restrict your phone ( or it restriced by itself) to update/download apps.
    Hope it will be helpfull.

  • When I try to delete message threads on my iPhone 5, the message app won't work until I restart my phone. Once it restarts, the message threads that I tried to delete are still there. Any advice?

    When I try to delete message threads on my iPhone 5, the message app won't work until I restart my phone. Once it restarts, the message threads that I tried to delete are still there. Any advice?

    I recently spoke to someone from Apple support, and here's what I gathered:
    "Older" phones (read: anything iPhone 4s or older?) sometimes have trouble keeping up with the processing demands of the newest software. When deleting threads with a lot of media (photos, videos, etc), it can take a lot of processing to successfully delete. What this support tech suggested was picking some of the bigger threads at night before you go to bed, deleting them, and then leaving the phone alone-- and plugged in-- overnight to give it enough time to delete everything. He suggested not even pressing the lock button; just leave it to process (though I imagine the screen will lock on its own anyway).
    Not sure if it works yet since I just spoke to him, but it's the closest thing I've got to a solution!

  • Idisk still trying to sync daily, how do I delete sync

    Since upgrading to Mountain Lion, the iDisk - which no longer exists - still tries to sync daily using the schedule I had setup when using MobileMe. Each day I get the same error message that it can't perform the sync. I understand that but I can't figure out how to delete the sync settings.
    MobileMe is not present in System Preferences, so I can't delete the daily sync there. Nothing in iCloud has a way to delete the old MobileMe sync. How do I delete this sync so the sync error doesn't appear everyday?
    The iDisk icon does not appear in Finder so I can't make any changes directly to iDisk. If I try to login to my MobileMe account, which I know is now my iCloud account, it automatically sends me to iCloud. I can't find anyway to delete the sync in iCloud.
    Thank you.
    Sheri

    I'm afraid I have no further idea. You don't have a MobileMe prefs pane in 10.8, and if you can't find any of the prefs files then all I can suggest is that you contact Support.
    If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
    http://www.apple.com/support/icloud/contact/
    You will need the serial number of the covered hardware.
    If you are not covered by AppleCare, then - in common with other free email services - there is no free support (MobileMe Support is no longer available) and you will probably be asked to pay a fee.

  • I have deleted some tracks from iTunes. However, it is still trying to sync them.

    I have deleted some tracks from iTunes. However, when I sync my iPhone and iPad I get an error message for the tracks I have deleted. It is still trying to sync them.
    How do I stop this happening?

    Did you dlete it form iTunes and then sync?
    Did you try swipingleft or right the song on the iPod and then tapping the delete button that comes up?

  • Deleted databases still shown on OEM

    Hi,
    I have deleted several databases using oracle database configuration assistent. I think this way it will be deleted clean. But when I do refresh all nodes from the navigator menu, these databases are still shown there. When I double click on them, I get the error message that says TNS listener failed to start the dedicated server process. Is this normal?
    Thank you for your help.

    Hi,
    Thank you for your reply.
    I tried to remove those databases and do the refresh again. They come back and I get the message saying refresh failed for some nodes. It should fail for the databases are gone. But why those db names reappear in the nagivation tree? Is there a way to correct it? Thanks.

  • Decommissioned a file server, but every mobile account in the place is still trying to connect to it on login!

    A couple of months ago we decommissioned the 10.4.11 xserve that was serving as our LDAP server and home directory server for mobile accounts.  We migrated all of that to a newer 10.6.8 xserve.  It was a fairly rough migration, but we've pretty much sorted it out except for one last annoyance: when you look at System Preferences->Accounts->Login Items for all of our mobile accounts, every single client is still trying to mount an afp share on the old server.  Logging in takes FOREVER because the connection needs to time out, so now my users are no longer logging out/in as often as they should, and so their Home Sync's are getting old.
    When you go to the client's Preferences, the line referencing the old server share is still there, but the minus sign is greyed out so the item cannot be deleted.
    The Kind is listed as "unknown" and there is a grey warning triangle next to it.
    This is clearly some sort of template/Preference that is hardcoded to the old name, and whatever file this is got moved to the new server (which has a different name and different numeric IP address.)  Because even the BRAND NEW users that I have created since after "pdc04.hgbc.com" disappeared are trying to log in to the non-existent share on the non-existent server, too!
    I have tried running grep on the entire disk on one of the clients looking for the string "pdc04", and updated everything that I found using vi directly on the files.  I have tried running grep on select directory trees on the new file server looking for pdc04.  In my grep on the client, I found the string in
         /Library/Managed Preferences/user/loginwindow.plist
         /Library/Managed Preferences/user/complete.plist
    but searching all of the logingwindow.plist and complete.plist files on the new server comes up with nothing.
    Does anyone have any idea where the template or preference or plist is on the server so that I can delete or update the file with the new host name?

    I think that Grant is on the right track -- but the problem is that whatever file that pdc04's Server Manager wrote into is not available to pdc's Server Manager to edit or even display.
    We upgraded mostly by turning off the G5 10.4 xserve and unplugging the fiber-channel RAID (with user accounts on it) and plugging the RAID into a fiber-channel card on the new (to us) Nehalem 10.6 xserve, which we did after using Migration Assistant between the machines.  Then we had various and sundry problems, and we ended up moving all of the mobile account directories to the internal RAID on the new server.
    Clearly there is a file somewhere that acts as a template for mobile accounts and it refers to the old machine but its been moved to the new machine.
    Only two of the mobile accounts have directories in the /Library/Managed Preferences folder.  One of them, ironically, is mine, and my account hasn't worked right since we went to the new server.

  • Deleted ringtones still on phone

    I recently deleted a few ringtones from my iTunes library and from my computer. When I went to sync my tones the ringtones I deleted are still there on my phone. I tried checking and unchecking ringtones and re-syncing but nothing is working.
    I have an iPhone 4 and it is updated to iOS5.1.1.

    If you don't want to go through the whole restoring process, I think I've found a simpiler way to delete your tones from your library. While your iPhone is attached, go to the homepage of your itunes library in "Albums" view. Looks like this:
    -Then, in the left hand corner, tap the "Music" tab.
    -The drop down menu will fall down, and then you will select the "Tones" button.
    -And from that screen you will be able to delete, rename, & customize your tones anyway you like! =]
    Hopefully this helps!!

  • Missing DELETION/ARCHIVE category entries in IE configuration

    hello gurus
    The PI production server in our landscape is running out of space.
    We are trying to schedule archiving/deletion jobs.
    While checking PI system, we could see that there are no entries for
    ARCHIVE/DELETION parameter category in Integration Engine configuration.
    (SXMB_ADM>Integration Engine Configuration>Change Configuration).
    Will these be maintained when we run the jobs or do we have to maintain
    them explicitly?
    Thanks in advance.
    Regards,
    Xineohpi

    Hello,
    I suppose they will be created after you run:
    SXMB_ADM>Define Interfaces for Archiving and Retention Period -> Retention Period
    /Jakub Turminski

  • Client still trying to use obsolete Software Update server

    I was experimenting with Mac OS X Server, including the Software Update Server and setting up managed client computers. After some testing, I decided that Mac OS X Server was too complex for our needs and switched the server back to standard Mac OS X. I also removed the server from the Directory Access settings on my client machine, and rebooted.
    I thought this was enough to clean up my client machine, but it is still trying to access the Software Update Server on my test server. I can tell this by running softwareupdate from the command line:
    dalba ~> softwareupdate --list
    Software Update Tool
    Copyright 2002-2005 Apple
    2007-03-07 09:29:24.219 softwareupdate[353] Loading CatalogURL http://purr.local:8080/index.sucatalog
    2007-03-07 09:29:28.804 softwareupdate[353] loader:didFailWithError:NSError "can’t find host" Domain=NSURLErrorDomain Code=-1003 UserInfo={
    NSErrorFailingURLKey = http://purr.local:8080/index.sucatalog;
    NSErrorFailingURLStringKey = "http://purr.local:8080/index.sucatalog";
    NSLocalizedDescription = "can\U2019t find host";
    can’t find host
    I can't figure out where this setting is being stored so that I can erase it. I've already tried using the Restore Default feature of Software Update Enabler <http://www.wiretapped.net/~proton/suenabler/>, but that hasn't fixed the problem, even after resetting all three preference domains (Current User on This Computer, Current User on Any Computer, and All Users on This Computer) and restarting. I've searched through /Library/Preferences for the string "purr.local" and didn't get any hits.
    Any clues as to where this setting is being stored, or how to erase it?
    --Stuart
    PowerBook G4 17"   Mac OS X (10.4.8)  

    I think I just solved my own problem.
    There are settings in /Library/Managed Preferences that aren't reset by Software Update Enabler. In particular, I had a file named "/Library/Managed Preferences/samalone/com.apple.SoftwareUpdate.plist" that contained the obsolete server setting for Software Update. In my case, I don't want to have managed preferences anymore, so I just deleted the entire /Library/Managed Preferences folder and restarted.
    --Stuart

Maybe you are looking for