Deleted PO conditions reappear

Hi all,
The deleted pricing conditions keeps appearing back the next time I go into change mode of the PO. Eg using tcode ME22N, I deleted a discount condition say RA00 and managed to save the PO. The next time i go into the PO again, this condition re-appears with the same value before it was deleted. If I change the value say from 5% to 3%, the condition retains the latest information ie 3%. Happens for header and item conditions, std SAP as well as customised condition types. Not related to parameter EVO as I have literally tried all possible combinations for this paarmeter. I am on ECC5.0. Hope someone can help. thanks.

Hi
Check : Price Determination Procedure
In the Price determnation procedure, you have maintained this condition type and the procedure have been mintained for that vendor (as you know).
You have to change/delete the condition type in the Price Determination Procedure.
Pls Revert and Reward.
Regards
Vijay

Similar Messages

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

Error message when trying to delete a conditional tag.

When attempting to delete a conditional tag, the following error occurred and then the program closed down:
0x00ca1940/ 0x00000000
Anyone come across this error. In addition, I have had similar errors occurred when resizing graphic frames. Once the error occurs, the program shuts down.

Paul,
It might help if you let us know which version and build of FM that
this happened in.
Was the tag still in use throughout the document when you tried to
delete the condition? Did you get any prompts about deleting the
condition?

I cannot modify the condition value or delete the condition in po.

Dear All,
My client created a PO and completed the GR, IR steps. Then she realized that something wrong in the pricing. Then she reversed the IR and GR documents. She still cannot be able to modify a condition type in PO. The field to delete for condition type is inactive (greyed out) in po

Dear Dev,
i have alredy reversed GR, still cannot be able to modify a condition type in PO.

Deletion of condition table

Hi Guys,
I created condition table, access sequence by using condition table ,created condtion type and used condition type in pricing procedure. later becasue of some reason I need to remove the condition table. Hence, from the end I removed condition type in procedure, access sequence from condition type and table from access sequence.
When I try to delete the condition table I am getting below error message
"Message no. TK112
Diagnosis
The objects R3TR VKOI A803 und R3TR VKOS A803 cannot be edited together because the 1st object's original is in this system, whereas the 2nd object's original resides in another system.
System Response
The function is cancelled.
Procedure
Edit the two objects separately."
Does any one help the reason behind the this error message and let me know how to delete the condition table.
Thanks and Regards
Chandra Sekhar Alokam

Hello Chandra
Firstly I would recommend not deleting the condition table. Let sleeping lions lie, may be change its name to "Don't use" to avoid any unintended misuse. If you have removed it from access config, you should be fine. May be you are trying to remove even the traces of that config.
This issue is in the Change Request (Transport) Management area and ideally you should work with Basis guys.
That said, check out this OSS note which is basically a Z-code to make the entries in TADIR to be same for VKOS and VKOI type of objects. There could be other related OSS notes contained within this, so check them out also.
74453 - Problems changing condition table/info structure

BDC : creating Billing frm Dr/Cr Memo - Problem in deletion of conditions

Dear Gurus,
I am facing a problem when I try to develop a BDC for creating a Billing document from a Debit/Credit Memo Sales Order.
The requirement is to delete some condition when creating billing from debit note for Depot plant.
The problem I am facing is in time of deleting the condition , as I am not able to move the lines of table control in Pricing tab up or down.
the ok_code = /00 is not working and I have tried all p+,p- for that.
My logic is to bring the CONDITION that should be deleted at top position of the table control. but as I am not able to move the scroll bar , I got stuck there.
So any solution of that available or any alternative is available for the requirement ???
Thanks
Shibashis

V1 498 - Credit already exist for item...
What the above message means is that lines items have already been used as reference for the creation of credit memo request(s).
Create a new sales order, delivery and billing document. Then create credit memo request with reference to this new billing document and test.
In VTAF copy control, at item level, field "Pos./neg. quantity" dictates how the quantity in the source document is affected by copy control.
PS - I tried to create credit memo with reference to billing document (F2), there were no issues there. Therefore I am taking that the issue is with credit memo request (copied with ref to billing document F2)

Mass delete of condition records

Hi All,
Please advise if there is a mass delete function of condition records. I have uploaded prices for customer/material conbination for the month of novemver and i want to delete them all. I can do it one by one but it will take tooooo long. Also please advise that if a record is marked for delete indicator, then can it be used again ? or can i reomve it completely becasue i want to upload again with correct prices.
Appreciate your help
SAPXPT

Hi,
Let's get one by one.
> Please advise if there is a mass delete function of condition records. I have uploaded prices for customer/material conbination for the month of novemver and i want to delete them all. I can do it one by one but it will take tooooo long.
There is no such Transaction available to delete those like in MASS.
Best thing is to use a LSMW with VK12 transaction.
> Also please advise that if a record is marked for delete indicator, then can it be used again ?
Yes, You can.
Once marked for deletion they won't appear in the sales order automatically. Pricing Analysis will show you like this.
"Condition record has been deleted"
If you want to use it again go to VK12, and go in to your condition record.
Highlight the condition line item and press "Details" button (Magnifying Glass)
Un-tick the "Deletion lndicator" check box.
Save.
Then you can use it again as normal way.
> can i reomve it completely becasue i want to upload again with correct prices.
Yes, You can.
You can remove it completely from the data base. First you have to configuret your condition type in IMG to enable that function..
Go to V/06
Select you condition record & go in to details.
There you get a filed called "delete fr. DB" under "Master data" section.
Change it to "A with popup" or "B without popup".
Which means your going to delete it from the data base. (Where as you cannot use it again, like you do in Deletion indicator)
Save
Then come to VK12,
Go in to your condition record.
Highlight the condition line item and press Delete button from lower area.
If you set "A with pop up" in the condition record, you'll get a pop up saying,
"The condition type XXXX is set so that when the deletion indicator is set, the condition record can be physically deleted from the database.Do you want to delete the condition record physically?"
Once save system will delete it from the data base.
If you set "B without pop up", system will delete it without a pop up.
Hope this helps you !
Best regards,
Anupa

HOW TO DELETE A CONDITION TABLE??

HI
DOES ANYONE KNOWS HOW TO DELETE CONDITION TABLE?
THANKS

Vikas,
Do you want to delete a pricing condition table?
T-Code: V/04
In Change Mode, enter the condition table number and press enter. You can delete the condition table using menu Condition>Delete
If this condition table is part of a access sequence then you have to remove the table from the access sequence and then delete the table using the steps above.
Chandan

Deleted Mail Messages reappearing in InBox

iCloud Mail is acting like a POP account.
If I delete a message on my Mac, it doesn't get deleted from the iPhone's InBox.
Plus, deleted messages eventually reappear on the Mac as if I never deleted them.
Even before iCloud, using MobileMe, deleting a message from either my Mac or my iPhone would not delete the message from the other device.
Message was edited by: Michael Superczynski
double negative.

Hello Joe.
What type of mail account is this (POP, IMAP, .Mac)?
Certain messages keep re-appearing in my inBox, even when I delete them.
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Mail is only receiving some of the email messages sent to me.
Do you have any custom rules? It looks like Mail is downloading all the messages, but your rules are processing them in an unexpected way...
Open the Account Info window by choosing Get Info (⌘I) from the Action menu (gear icon) located below the mailbox list in the main Mail window. Does Mail display there the messages that it doesn’t download? Do they appear as already downloaded or as not downloaded yet (dot column)?

Delete pricing condition records : vk12

When i mark a record as deleted in vk12, there add a tick in DeletionID column. I was told the record would be deleted after database reorgnization.
I want to ask, when will DB reorgnize? Would the deleted records be active before DB reorginze?
Can anybody help me?
Thanks a lot

hi Yimeng,
In v/06 for your condition type check the field delete from DB
If you set this field as A or B,then only you will be able to delete the condition record permanently via VK12.Otherwise you can only set deletion indicator. after u set the indicator in v/06, then goto
vk12 and set the record as delete.so the first one controls the actions in vk12.
condition record can be deleted in two ways
1.physical deletion
2.marked for deletion.
The customizing can be done at the condition type maintainance in V/06,
u have three options
1.physical deletion with pop up
2.physical deletion without pop-up
3.mark for deletion.
select an option there and in condition record in VK12, select the record and
and delete with the deletion indicator.
SAP recommends physical deletion
reward if it is useful
bye MCM

Deleting pricing conditions using FM /AFS/VBAK_SALESDOCUMENT_CHANGE

Hi all,
following the instructions in oss note 593246 I have succesfully implemented code to delete a discount condition from a sales order using FM /AFS/VBAK_SALESDOCUMENT_CHANGE. But now I also want to delete a condition from a sales order position which has an item which has the AFS 'price by size' characteristic (an item with a shirt for example, with 10 pieces, which are divided in 3 smalls, 4 mediums and 3 large).
Using the same code that was succesful earlier, it deletes the discount condition, but also all standard pricing conditions, making the pricing in the order invalid obviously.
Has anyone else had this problem? And more importantly: has anyone found a way to do this succesfully?
Thanks in advance
Arjan

update:
setting the condition to value zero is possible I found... so at least I have that option. But deleting would be the tidy solution, so any help is still aprreciated.
If there is anyone also struggleing with this AFS module and pricing, I can share the code I am using to update to zero or delete (when the material is not price by size-ed.

Deletion of Condition type from contract.

Hi Experts,
In contracts (1000), there is one wrong condition type is displaying and I don't want to delete one by one in every contract,
Can anyone advise that how to delete same condition type in all contracts through one modification?
regards,
Dhiru.

Hi,
If you want to delete line item condition then use BAPI "BAPI_SALESORDER_CHANGE".
Regards,
Siraj

Deleted preferred networks reappear

Upon installing Mavericks, and turning on iCloud keychain, I noticed that all wifi networks I had ever connected to appeared in the preferred network list on my Macbook.
There were quite a few I naturally wanted to delete, so I removed them. Also my devices were trying to connect to networks I thought I had removed.
It didn't take me long to notice that my Macbook was trying to connect to some of these old networks again, and upon looking at the list - all deleted entries had reappeared.
Another symptom seems to be that if I tell my iPhone not to auto-connect to a public hotspot (BT WIFI for example), if my Mac ever comes near that hotspot it auto connects - as will my iPhone subsequently.
I have tried editing the com.apple.airport.preferences.plist file manually, deleting the Mac's WiFi service and recreating, and resetting network settings on all my Apple devices.
I have even looked at the Keychain app on my Mac, but it doesn't seem to be storing my wireless networks from what I can see.
From my Google-ing, it doesn't sound like anyone else is having this issue..
Any ideas?
Thanks!

Back up all data. Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Also disable it on the other devices. Delete the unwanted preferred networks from all devices. Then follow one of the procedures described in this support article to set up iCloud Keychain.

Deleting a condition record

hi guys,
i want to delete a condition record using VK12, am selecting the row and pressing the icon 'Delete Row' but its not working out, and the row still remains the same(the condition record not getting deleted). More over, the 'Deletion ID' is selected in the condition record.
how do i delete the condition record in this case. this is very urgent. plz send the replies ASAP.
thanks in advance.
kumar.

Dear Kumar,
There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an
alternative.
Deletion Flag
You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
Physical Deletion
If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
Recommendation:
SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
Physical deletion can be included using the change documents for example deletions in a specific period (Report RV16ACHD).
Reward points if this is helpful.
Regards,
Naveen.

Delete a Condition from item of particular sales order.

I tried BAPI_SALESORDER_CHANGE
and passed the following code. But instead of deleting it updates the condition even though update flag is kept to D.
 move: 'x' to y_wa_condx-cond_type,
 y_wa_konv-kschl to y_wa_cond-cond_type,
 y_wa_konv-kbetr to y_wa_cond-cond_value,
 'x' to y_wa_cond-cond_value.
 move 'D' to y_wa_condx-updateflag.
 append y_wa_cond to y_i_cond.
 append y_wa_condx to y_i_condx.
Any other FM can be used for deleting a condition?

This is the right FM for deleting conditions.
But u should not put 'x' to y_wa_condx-cond_type but the same value as for y_wa_cond-cond_type. See this thread for a sample code:
Re-Pricing in SALES ORDER using BAPI
regards

Deleted PO conditions reappear

Similar Messages

Maybe you are looking for