Deleted-recreated user too soon

Hi, I'm using Active Directory Version: 6.1.7601.17514. I was attempting to create a new user by copying a profile from the same group. I found out too late that the user I copied had her own .bat file and wouldn't be suitable to copy from. I was
advised that it would be safe to delete the new user, then recreate by copying another user's profile from the same group. I deleted the user. Then I recreated the user. It was on the last stage of creating the user when I got a message saying it couldn't
create a folder in the home directory because one already exists. It appears what happened was I didn't give enough time for the domain controllers to sync. It recreated the user account, it accesses folders for groups which it is a member of, but it does
not show a folder for the home directory. Does anyone have any idea for a remedy? I should note two things. I am relatively new to using Active Directory, and I had someone from the network team here advising me while I was proceeding. Thank you for any assistance
you can provide.

Hi,
You can try the following cmdlet to test the issue:
Update-CsUserDatabase
It may also cause by the issue with the user's AD properties. Please open the adsiedit.msc and find the user. Then check the user's properties of Lync server.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

How To Properly Delete a User Profile on Windows 7 in a Domain environment

I have not been able to find an answer that matches the issue I'm facing. I had recently setup a laptop for a user and soon after, he was experiencing issues that I thought might be profile related. So, I did what always worked for me on prior versions of
Windows without any fuss or side affects.
Logged in under the local Administrator account, I went into: System Properties>User Profiles>Settings and removed the user profile from their. When I do that, I get an error message:
Profile Error
Profile not deleted completely. Error - A required privilege is not held by the client
Ok, no problem I think. I just need to delete the user's profile directory under the users folder right? So I do this and figure when I try to log in again as the user that a new profile will be created. However, this is not what happens exactly. I login
with the user credentials and it logs in successfully. However, I get a pop saying:
You have been logged on with a temporary profile
You cannot access your files and files created in this profile will be deleted when you log off. To fix this, log off and try logging on later.
Please see the event log for details or contact your system administrator
So my question is; why did the profile not delete completely after both deleting the user profile under System Properties and after deleting the actual profile directory? What did I miss and what is the proper method of deleting a user profile completely
without running into these other issues?

Hi Womprat,
According to your description, I understand that you want to delete user profile but display an error in Windows 7.
Please use other user (with administrator privileges) login this computer, then open Properties for Computer--->Advanced system setting--->Settings for User Profiles, then select the profile you want to delete.
More details about Delete a user account, please refer to:
http://windows.microsoft.com/en-us/windows7/delete-a-user-account
Additional, please contact Windows 7 IT Pro Team so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc
Best regards,
Allen Wang

How to delete a user in SAP-CPS Version 7.0

Hello,
I created my users via UME ( User Management Engine of Java Application server). Unfortunately I used the wrong name convention, so I had to recreate all the users in UME. Afterwards I delete all wrong users in UME.
Than I tried to login with my new user in SAP-CPS (users are normally created in SAP-CPS during first login) but I get the error message that I reached the maximum number of 10 users allowed in the basic version. No problem I thougt, I simply delete the wrong ones in SAP-CPS. But I do not know how to delete a user! I could not find any menu item or any describtion in the manualls how to delete an user in SAP-CPS.
I remove the users from any Isolation group, I disabled all the users but still I could not find any way to delete them.
Has any body a hint for mor.
Kind regards
Frank Morleo

Hello Anton,
deactivating the unused users made it possible to login with the new ones.
Thanks for your help.
Now I have to find out how to clear the deactivated users from the list.
Regards
Frank

How do I create a new user, move my old files etc over, and delete old user

This is why I think I need to.
My computer got hit by lightening, and I may have created a new user account through netinfo rather than system preferences /accounts/+user. Mail used to open twice, but no longer. Now, Safari askes me for my keychain password twice, Spotlight can't find a folder on the computer when the search is restricted to folder and computer, though the folder is there and easyfind finds it, and when System Preferences/Spotlight/Privacy has the hard drive icon added, then deleted, Spotlight still does not find anything. (Yes, everything is backed up, on CD, DVD, and online.) Microsoft Tec Support says
"Here is a summary of the key points of the case for your records.
When you contacted us on August 8, you had requested assistance with Microsoft Office 2004, as your installation of the updates was unable to find the correct version of the software to update. After creating a New MAC User, we identified the issue to be with a corrupt MAC User account, and not a Microsoft issue. "
I believe Microsoft. So, creating a new user was easy.
But copying files uses up too much hard drive (movies, music), and may miss keychains, preferences, mail, address book, and documents. Since Spotlight no longer works, who knows what is happening. (Yes, I've repaired persmissions, and disk repair. No change). I'm using up my hard drive trying to move files to the new user. If I share files, or put them into a public folder, then delete the old user, will I still have the old user's files in the new user's account? It is not clear to me what I should be trying to do in order to create a new user, move my old files etc over, and delete old user. Thanks.
My responses will be slow, because I have to drive to town to use the internet. I've ordered a new airport which may take care of that problem. SO be patient.

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Error after deleting a user

Hi,
i have a big problem. I cannot change my process template,
cause I get the error message:
<i>Cannot retrieve activity template: User USER.PRIVATE_DATASOURCE.un:tftak1 doesn't exist!</i>
But the User tftak1 is not the designer, but he was involved in the process as a default role.
After I deleted that user I got that message.
What could I do? I need fast help, because we want to start our testing phase...
Thanks in advance
Steve

Hi Steve,
An idea would be to recreate this user tftak1 and then to edit the process and remove it from the default roles.
Other possibility would be to go to the Administration UI in GP and there to change the user assignement for the default roles.
The extreme solution would be to forget your process and to create a new process object. Then you can add again your existing block to this process.
Hope this helps,
Best regards,
David

HTMLLoader fires complete event too soon ?

Hi to all,
I have following problem i`m displaying pdf in a nativewindow (pdf is around 5 mb so i guess it takes some time to be rendered) I want to show user some custom progress bar until pdf is prepared to be shown in htmlLoader.The problem is that Event.COMPLETE is being dispatched too soon, pdf is not prepared to be shown.I tried with HTML_DOM_INITIALIZE event but same thing happened.
I don`t want users to see empty window, i want to either progress bar or fully loaded PDF be shown.
I figure out some workaround : i will download file from the location and open it up with openWithDefaultApplication() option within AIR 2, but i want to now if i can do it the way i wanted at the first place.
Am i doing something wrong or there is some problem with HTMLLoader ?
Here is simple code:
htmlLoader.location = url;
htmlLoader.addEventListener(Event.COMPLETE,onLoad);
onLoad (...)
//hide progress bar

Dmennenoh, pulling the playSound function out of the other functions worked perfectly! I should have known better. Even though everything is working correctly I am now recieving an error stating that "Parameter url must be non-null." I'm certain this has to do with the sound file urls that I am passing from the xml document... but if the sounds are playing the urls must be non-null already.
I tried changing the tl["snd"+i] to container_mc["snd"+i] as you suggested but the sounds would not play at that point. I recieve an error saying: "a term is undefined and has no porperties." Below is how I built it:
function buildScroller():void{
     for (var i:Number = 0; i < 55; i++){
        //create movie clips
        var container_mc:container = new container();
        addChild(container_mc);
        container_mc.x = 325 * i; // set the number here to the width of the movie clip being repeated
        //sound info
        container_mc["snd"+i] = new Sound();
        container_mc["snd"+i].load(new URLRequest(xmlData.sound.loc[i]));
        container_mc.snd = container_mc["snd"+i];
        container_mc.addEventListener(MouseEvent.CLICK, playSound, false, 0, true);
function playSound(event:MouseEvent):void {
     event.currentTarget.container_mc.play();

How to delete another user?

Could anyone please tell me how I can delete a user of my shared library? If I locate the itunes folder on my pc, and just delete their folder, music in my itunes ends up with a broken/missing file?
Regards.

Hi Chris. I've got 1 pc to share with 2 ipods. I hold shift and click on itunes to select which library I want to use.
I want to delete the other user because when I add music to my library, it does not go into the other persons library. I didn't notice this until I added over 2000 more songs to my library! I think it would be too much hassle trying to find which songs are missing from the 2nd library. I then created another library for the other user and just dragged all of my itunes songs into their library.
I then deleted the first folder I made for them, but then the dreaded '!' appeared in my library. I restored the folder from my bin and this fixed the ! problem. I'm just stuck with a folder in my itunes folder, which I don't need any more> Hope that makes sense!!!

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

If you are admin.
Try restarting your Mac.

How to recreate user environment profile

Hi All,
Does any one have any idea about recreate user environment profile ?
SAP User home directory is deleted, so SAP system can't be started.
OS version is solaris 10.5.
Regards.
Wenjr

If you have backup is the best options.
If not
proceed as follow.
1.Copy the /home/sidadm directory of sidadm from qa or dev server.
2.Adapt sidadm enviroment into .sh or .csh depending upon the shell sidadm uses.
3.Adapt instance start and stop script
4.Probably you may need to adapt the .kshrc or .cshr??
5.You can do ls -la in dev or qa and check the files required
It is easy if you have no option but restoration from backup is the best.
All the best.
Amit

Can't delete old user accounts from iBook (G3 - Darwin 6.8)

Hello,
I'm having a pain of a time trying to remove the old user accounts on this iBook I was given. The accounts page in the system settings is unlocked, I click on an accountm, the click on Delete User, it works for a while, and then when it is finished 'deleting' the user account is still there, nothing has been deleted. I've try a dozen times now. I'm stumped. Can't find anything on the internet that will help.
Thanks,
David.

So far, I've not had this kind of issue; but did find a few directions to check to see how to go about removing user accounts... or renaming them, etc. One of the recent discussions I've read through (three pages) had some ideas that could work.
Outside of booting the OS X computer into a super-user account where you can delete Admin users, etc and probably if not familiar with unix, do some incredible damages too; I'd try other exercises first as I am timid. What version of OS X is running in your vintage computer?
In the process of 'Change Name on Home Folder' some revealing ideas came across; some may transfer...
https://discussions.apple.com/thread/3366855?tstart=0
And some ideas that could be used to another end, may be found here...
http://www.cultofmac.com/126621/how-to-move-or-rename-your-mac-home-folder-macrx /
How to delete user accounts...
https://discussions.apple.com/message/3836878#3836878
However, there are no warrantees expressed or implied. Always a fine idea to read and sort information since some of the ideas available only allow you do perform the practice once correctly. Or wish you had.
Good luck & happy computing!

9iFS unable to delete lost users

using ifsmgr, I added a user, then deleted the user using the defaults from the ifsmgr. This left the user in the credential manager. I then tried to add the same user back in and got the error that the distinguishing name is not unique. I then tried to find the name so I could delete it, but there seems to be nothing in the ifsmgr to take care of this. I care not update, add, delete, or clean up this user from the GUI.

Found another on the same topic... I brought up the browser from ifsmgr and was deleting users using the browser when I accidentally deleted the home folder. The mouse does not seem to be very accruate! Well with a blink of an eye, the entire home folder disappear and there was no undo. :-( Well I recreated the system folder and then the mail sub folder. Then I went to the user to update the profile, but could not because the mail folder location was empty and greyed out and REQUIRED. Well, I then found that I could update the homefolder with an XML ifsput command so that was good, but the mail folder was still blank. I tried to run the xml ifsput on the mail folder and received the results that the system cannot update that field...readonly... Well I went online to the ifs website and tried to select the system user and received the alert from the client browser (nullpointerexception). I figure it was because of the mail folder that was gone, but was not. I then went to the database table and found the folder IDs for the old mail folder still present in the user email profile. Of course this ID was not available since it was deleted. At this point, We are saddened with our initial test and we are re-installing iFS, painfully. As part of this, we also determined that the guest account is required for the Cup and other servers to start up. If we wanted to desable the guest account, the question is how if it is required to start many of the services?
OK, that was a mouthful, but it really is all related.

Selling my MAC, should I delete my user profile or completely reset?

Hello all,
selling my MacBook Pro to my friend. What's the best thing to do to "clean" my MacBook for him? Delete my user or "restore" mac?
I have "lion" installed so Im pretty sure it wont restore to that, probably the old operating system it had before I installed Lion.
Thoughts?
Michael

steve359 wrote:
As has been explained to me, you cannot sell a pre-Lion-originally system with your-purchased Lion on it. You need to retore to the original OS disks and let the new user buy the upgrades. SL I think is transferrable as an OS-upgrade if the disks travel with it, but not Lion.
Thanks. I was kind of thinking it might be like that but wasn't sure since it really represents a reversal in how things used to operate. Of course somebody stands to a big advantage since now if, say a Mac makes its way through 3 owners, all 3 have to buy the Lion upgrade. Of course you also now cannot sell an unwanted OS anymore. And if Apple continues its pattern of no longer selling anything but the last 2 OS versions, all those Macs out there will useless a couple of years down the road since if somebody offered me Michael Drabousky1's Mac 3 years from now and I can no longer get Lion for it, I won't buy it. Goodie, goodie (for somebody), all those old Macs will soon be unusable and everybody will have to buy more new hardware!

Starting an iPhone app "too soon"

When an app starts up on the device, the default image (if one exists) appears, and then, some time later, the application becomes actually active (e.g., data appears on the screen "filling in the blanks"). I've noticed on my applications that if I tap the screen too soon, i.e., after the default image loads (which, to the average user, means the app is running) but before the app is fully loaded, that it tends to "hang," ignoring keypresses etc even after the app has subsequently loaded.
Is there a "trick" to disable the user interactivity until it is ready to be acknowledged?

If it helps, my iSO is 7.1.1
It is an action from two events
1. using the kissanime streaming site. [which I can understand]
2. happens even when I'm not using the site. [but not as often, yet]
In the first case, I sometimes get an iPhone pop-up that asks me if I want to open the app page. it reads more like something wants to open an app page, do you agree ? More exactly like the pop-up says something can't open to the app store page, will I allow it?
I'll do a capture of it later and be more exact.
The times it just pops me over there when I'm not on that site nor using the browser are completely unexpected.
What I would prefer is that any such action acting upon my phone -always- asks the user if he/she/I will allow it.
It seems to be neccessary to prevent what I will think of as 'slimeware' forcing the iPhone to go to their app-store pages.
Since that requestor happens sometime, there should be a way to have it always be active; even if it requires an iSO update to have it be so. If I could make it always be active, I would consider the problem to be solved.

Ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]

ive tried
1.1
1.2
1.3
1.42
come on msi, give me a fighting chance :(

Here is the last thing I received from MSI tech support. I'll give them this much, they are much more responsive than VIA or AOpen ever were when I first got my flakey MVP3 board...lol. I hope they can figure this problem out!
Quote
So far in our own testing, we have not found any High CPU Temperature issues.
We have gone through the threads you have provided to us and we will co-work with AMD to see if anything needs to be updated from our side with the New Castle Core.
Once again, MSI appreciates all the findings/reports you have provided to us and we will update you once there is any findings becomes available.
Sincerely,
Technical Support Division
MSI Computer Corp.
http://www.msicomputer.com
MSI - Beyond Expectations!
1-626-913-0828
1-626-581-7721 Fax
Due to high volume of cases daily, we may not be able to answer question promptly. Please kindly provide your name, phone number, model number, state in which you are calling from, a brief description of your problems, and we will try to reply your issue as promptly as possible. Thanks
The information transmitted is intended only for the person or entity to which it is addressed and contained confidential and privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient are prohibited. If you receive this in error, please contact the sender and delete the material from any computer.
-----Original Message-----
From: my email deleted
Sent: Friday, August 06, 2004 8:51 AM
To: [email protected]
Subject: RE: 3 -- Customer Problem Description Form
I know you guys think you fixed the Newcastle temperature problem. But there are still a LOT of us out here who are having trouble, using latest BIOS. People are reporting this all over the MSI forums. The behavior is as follows, flashing the BIOS might help initially, but soon after the temp shoots way back up.
Please see the following threads:
Temps and BIOS 1.42
ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]
Possible fix for CPU temp problem found.
The same old problem with temperatures (K8N Neo Platinum)
K8N Neo Temps :(

Deleted/Removed Users

Hi Experts
Hi,
I tried to create the a user on SAP, the system throws that he already exists, it turns out the user was removed from SBO some time ago. When I run a query on OUSR sure enough the user is there, the only difference is they fall under a table called Group 99. On the normal user window the user is not available.
How can I restore this user or recreate them in the system?
Regards,
Lebo

Check with the following SAP Notes which deals with Deleted/ Removed Users
869326 Cannot add user code even if previously deleted
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=869326]
827232 Recreation of deleted users
[https://websmp130.sap-ag.de/saphttps://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=827232]

Deleted-recreated user too soon

Similar Messages

Maybe you are looking for