Deleting Account Assignment Templates

Hello.
We currently have a large number of account assignment templates that are no longer being used. The problem is the employees who created them are no longer with the company and therefore can't delete them. Other users are unable to delete or make changes to these templates.
How do we go about deleting these old templates?
Thank you.

I found this thread because we received questions from users who wanted to delete Account Assignment Templates from collegues that have left the company.
We found that with transaction FKMT you can delete an Account Assignment Model, but not an Account Assignment Template which is made by an other user (in FB50). SAP does not allow you to delete them. You can remove them from your list in FB50, but they still remain in the datatable and can be added to your list. This can not be done centrally, but on user-level.
The only way to remove them from the database is by copying the ABAP code for the Account Assignment Template Remove-program and delete the function that checks if you are the correct user.
We have meanwhile decided not to do so. We added authorization object T_ASGTTNPL to the users so they can remove the templates from the list.

Similar Messages

  • Account assignment template (FB60) Line item Value date

    Hi Gurus,
    I have an issue regarding the value date on line item level on Account assignment template on FB60. When user activates an Account Assignment template, on each line item system populates the value date equal to the date of the template creation date and not the current date. I created the template with several GL accounts and before saving it I deleted the value date from the line items. Now I want to reuse the same template after a week, it shows the correct GL accounts but with the value date equl to the template creation date (last week date). Any suggestion please, how can I fix this.
    Regards,
    Ahmad

    In the IMG "Enter Global parameters" for your Company code change the status of the switch "Define Default value date" and then test.
    Thanks
    Ron

  • How do I save vendor field in account assignment template?

    I created an account assignment template in t-code VF60. However, when I try using it, the field 'Vendor' does not get populated with vendor number. All others, such as GL, D/C, amount & cost centers get populated. Any ideas why the 'Vendor' field with vendor number doesn't get saved/populated?
    Thank you in advance!

    refer to Note
    503364 - Transaction variant not imported for all screens
    546889 - FAQ: Screen variants in FI Enjoy Transactions
    504784 - FI/MM: Problems with screen variants
    501606 - FBV0: Transaction variant has no effect in Enjoy transactn

  • Account Assignment Template not showing in FB50 screen

    Hello all,
    We are live on ECC 6.0 and we are dealing with one very strange issue. For some of the users, not all account assignment templates are showing in transaction FB50 under the Overview screen if you have turned on the Tree On option. Have you seen this before? Can you help me resolve this issue?
    Many thanks.
    Linus

    Hi All,
    I am having the same problem drivering me so crazy... and i have checked the SAP Notes like 201461;535225;425554;303505, all the notes was SAP small bug.......so i think maybe this is bug too.... hope somebody can give me some advice.. will be very appreciated.......
    Question:
    FB70--
    In our company, just one user can automatically view all the u201Caccount assignment templates for itemsu201C created by other users.
    But other users can not automatically view templates created by him, if they want to view it, must be added first (Add Account Assignment Remplate functionality).
    Note:
    u2022     I have simulated in DEV system, not because the role assignment. Not because the user parameter ID default..
    u2022     Is there some control parameter for the specific user?
    u2022     There are two tables for the templates:
    KOMU  -- for all the templates created by all the users.
    PKOMU   -- for personal template spool.
    Best Regards,
    Pedro
    Edited by: Peizhuo Guo on Sep 27, 2008 5:03 AM

  • About Account assignment templates

    Dear Experts,
            When user use FV70 Tree on button ,they can see all users Account assignment templates list,how to control use only see themselves  account assignment templates,current user can not see another users account assignment templates?
            Looking forward to your reply.
    Best Regards,
    Merry

    Hi,
    Definition: Account Assignment Category: - A key indicating whether an item is to be assigned to an auxiliary account (such as a cost center).
    The account assignment category determines which account assignment details are required for the item (for example, cost center or account number).
    Generally used Account Assignment Categories are Cost Center (K) in case of Miscellaneous Purchases, Assets (A) in Capital Goods Purchases, etc...
    You can configure Account Assignment Category in Transaction OME9 OR you can go with following path;
    SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories
    Her you have to perform following Activities;
    1.  Check the attributes of the account assignment categories
    2.  Maintain the account assignment categories to suit your requirements

  • FB50:  Account Assignment Templates

    Hello Gurus-
    I have a problem.  My users have saved templates when using FB50 with G/L, D/C, Cost Center.  When the template is saved, the Functional Area is populated.  The template is saved and all is well.
    However, when the user accesses that template again and completed the date, and amount, he/she gets an error "An entry in field functional area is not permitted".  This then requires the user to clear out the functional area and then save again where SAP enters the same functional areas again.
    Where in SAP, setting or whatever can this be changed so the user can proceed without clearing out the functional area. 
    There is no way to save the template without the functional area unless we do not enter the Cost Center.
    Thank you.

    Hi AMS,
    The likely reason why you cannot save the account assignment template without functional areas unless you do not enter a cost center has to do with the fact that, either functional areas have been maintained in the various cost centers in KS01/KS03 or the G/L account requires an account assignment object which does have functional maintained in them.
    The only way to avoid this is to remove the functional areas from the cost centers in KS02 which I will never advise you to do due to data inconsistencies.  I would rather urge you to explain to users the main use/reason of account assignment templates.
    Regards,
    Elias
    Edited by: Elias Akorli on Aug 4, 2010 12:59 PM

  • FB60 Account Assignment Template

    Hello,
    Is it possible to change the table setting configuration of a specific template without affecting the settings of the other templates? When ever I make the changes, I get a message that the changes have been recorded accross the system and I see that the other templates have been changed as well. Please advice.
    Thank you and best regards!
    Munair

    hope to get some advice on this - Munair

  • Issue with Account Assignment Model - FI - GL Account

    Hi SAP Guru's...
    We are facing an issue while trying to post F-02, by selecting an account assignment model. This issue started when we updated the Production client with Support Packs (SP-12 and SP13)..this weekend.
    While going for F-02, and selecting Account Assignment Model. A message Pop up with the following information - " Screen template VNU06 of acct assignmnt model Changed"..
    _In the HELP Screen the following details are appearing :-_**
    Screen template VNU06 of acct assignmnt model changed.
    Message no. FX260
    Diagnosis :-
    The entry screen VNU06 of the selected account assignment template has been changed inappropriately.
    System Response:-
    The account assignment template can only be loaded when screen VNU06 has been corrected.
    Procedure:-
    If entries exist for a screen variant, the relevant entry screens must contain all fields that have already been filled (technical note: In this case, at least field AUFNR on screen VNU06 is missing).
    Carry out the following activities:-
    Add the fields to screen VNU06 (In the following transaction, choose Posting -> Account Assignment Template
    Proceed)
    Only then can you assign a new screen to the account assignment template or delete the fields not required.
    1.) Interestingly i went and check whether any value  is there in field (AUFNR - ORDERS) in the Table KMZEI...No Value is seen.
    2.) Also this field (AUFNR) is not selected in the VNU06 Screen varient templete, by us.
    Please help us.. This being a Critical Issue.. any of your valuable suggestion, is awaited.
    Thanks
    VinodRao

    Hi Ravi,
    Tks for response. I'm looking for ME_REQ_POSTED but it doesn't exist in se18. The only BADIs I can see starting with 'ME*' are:
    ME_CIN_LEINRF2R    
    ME_CIN_LEINRF2V    
    ME_CIN_MM06EFKO    
    ME_CHANGE_CHARACTER
    ME_CHECK_ALL_ITEMS 
    ME_DEFINE_CALCTYPE 
    ME_HOLD_PO         
    ME_PO_SC_SRV       
    ME_REQ_HEADER_TEXT 
    ME_TAX_FROM_ADDRESS
    ME_TRIGGER_ATP     
    I'm using 4.6C version... any other suggest???
    Edited by: George Navarrete on Dec 21, 2007 4:40 PM

  • Revoked SES with account assignment distributed by quantity cannot be modified or deleted

    Hi All
    I have users who are posting service entry sheet with the account assignment distributed
    on a quantity basis across multiple maintenance orders.  The acceptance works perfectly but we are having problems if a correction or cancellation is required.
    The service acceptance can be revoked successfully but afterwards it is not possible to change the service quantity or to delete the service entry sheet.  When we try we receive an ABAP runtime error:
    Runtime Errors         COMPUTE_BCD_OVERFLOW
    Exception              CX_SY_ARITHMETIC_OVERFLOW
    Date and Time          08.07.2014 14:25:12
    Short text
         Overflow during the arithmetical operation (type P) in program
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_EX_MMSRV_ACC_DIST_SAP======CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
          caught in
         procedure "IF_EX_MMSRV_ACC_DIST_SAP~DISTRIBUTE_ACC_ASSIGNMENTS" "(METHOD)", nor
          was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         An overflow was discovered in an ongoing arithmetical operation with
         operands of type P. Possible causes are:
         1. The result field of type P is too small for the result.
         2. The result or a intermediate result has more than 31 decimal places.
    This problem does not occur if I run the same scenario any of the following variations so I'm confident the problem is related to the account assignment distribution by quantity:
    Single account assignment
    Distributed account assignment via percentage
    No service acceptance/revoke has been posted
    There are ways to get around the problem but I'm trying to find a SAP Note that may be relevant.  I haven't had any luck yet.  Does this problem ring a bell with anybody who might be able to point me towards an appropriate note?
    Thanks
    Robyn

    Hi,
    Kindly refer the below OSS Note, which explains the reason and correction for the error which you are facing.
    1715475 - MAA2: ML81N/MIRO: false postings for Service PO

  • Set deletion indicator in purchase requisition account assignment

    Hi Guys,
    Can you please help we with the solution to set deletion indicator in purchase requisition account assignment or close purchase requisition. A purchase requisition of $3.600.000,00 was created through Project system Network-External Processing and it has 2 duplicate network activities and $2.246.577,20 was converted to purchase order then $1,353,423 became the network remaining order plan. A purchase order service entry sheet was accepted and the invoice was created. Now Iu2019m experiencing problem when Iu2019m trying to change WBS element and Network system status to TECO in order to remove the remaining order plan of $1,353,423. Iu2019m getting error message number:06411 the procedure I have follow to correct the error is to reduce quantities in the account assignment item and delete superfluous account assignment by setting deletion in each case but I cannot do that because the fields are grey
    Regards
    Sandile

    Hi,
    please check first if the report ZMO_CORRECT_EBKN  from note 739004  can correct the problem.
    I would like to recommend you to check also the note 796973 whether the correction is avalilable in your coding, it should solve the issue.
    In case the problem still persists, please open a ticket to get help from the primary support in area MM-SRV.
    Regards,
    Edit

  • Why account assignment is not deleted when push "Order as Direct Material"?

    Hi Gurus,
    I have a problem with shopping carts (SC) of stock items:
    1.- I add 5 items.
    2.- I push "Order as Direct Material" button for 3 items only.
    3.- I push "Hold" button to set SC with held status.
    4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.
    5.- I order the SC.
    One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
    But for the last 2 items (number 4.-) the account assignment is not deleted.
    This is causing that the PO's have error: "Invalid tax code".
    Somebody can say to me why is not deleting the account assignment for items previously hold?
    My systems are:
    SRM 4.0 (SRM_SERVER 500) level 8
    R/3 4.7 (SAP_APPL 470) level 24

    Juan Alonso Valenzuela Rodríguez wrote:
    > Hi Gurus,
    >
    > I have a problem with shopping carts (SC) of stock items:
    >
    > 1.- I add 5 items. -- O.K - Assumed that you have 5 items added
    > 2.- I push "Order as Direct Material" button for 3 items only.O.K.You selected as ORDER as direct only for 3 rd item
    > 3.- I push "Hold" button to set SC with held status.- O.K. now HOLD the shopping cart
    > 4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.- Now you went to 2 nd items and ORDER as direct
    > 5.- I order the SC.but this 2 nd item account data was not removed though you selected as ORDER as direct-
    check item data what is stored here DP ? if account assignment not cleared it could be a bug. but you need to convince them to get a correction note.
    >
    > One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
    >
    > But for the last 2 items (number 4.-) the account assignment is not deleted.
    >
    > This is causing that the PO's have error: "Invalid tax code".
    >
    > Somebody can say to me why is not deleting the account assignment for items previously hold?
    >
    > My systems are:
    > SRM 4.0 (SRM_SERVER 500) level 8
    > R/3 4.7 (SAP_APPL 470) level 24

  • PR Deletion flag set in LIMITs tab but not in Account Assignment tab

    Can anyone help with this scenario?
    On the "Limits" tab of a PR, user enters multiple accounting lines. This results in table entries in both ESKL and EBKN
    Then, one ore more lines in the "Limits" tab get flagged for deletion but the cooresponding lines in the "Account Assignment" tab are not flagged for deletion. As a result, the entries in table ESKL are flagged for deletion but not the cooresponding line sin table EBKN.
    Is this normal? How can we fix it if it's not?
    Thanks in advance.
    John

    Rajesh,
    So if a single PR line item has 10 entries in ESKL, and subsequently 10 entries in EBKN (Sequence #s 1 - 10)
    Then sequence 1 & 2 get flagged for deletion in table ESKL (via the Limits Tab), sequence 1 & 2 will remain un-deleted in EBAN unless the entire line item is flagged for deletion (trash-canned)???
    Please confirm.
    Thanks,

  • Limit cart unknown Account Assignment Not picking Approval email id

    Hi All,
    when i am trying to create a Shopping cart with unknown Account Assignment, at first instance approval email id  is not picking. When i made some changes in the item data (say Descrtiption ) it is picking the approval email id. in SRM
    We are SRM 5 to 7 upgrade, In SRM 5 there is a note to 974239 which will solve the issue. But the note is valid forSRM 7 EHP3 Version.
    Can any one help me in giving the latest note.
    Many thanks in advance.
    Regards,
    Charan M

    Hi
    <b>Related links/ SAP OSS Notes to check out -></b>
    Note 861889 - Limitations on limit and service PO's in case of ECS
    Note 1046593 - Limit PO - Unable to delete and create new item
    Note 966323 - Service Item: Not able to create PO in ERP backend
    Note 969077 - LIMIT:SC with Account Assignment Unknown and IR_IND checked
    Note 1000184 - Account assignment error when document transfer to back end
    Note 1052892 - Account Assignment not visible for Limit Shopping Cart
    Note 933618 - Multiple account assignments for limit item are lost
    Re: Limit PO(Item category D instead of B)
    SE 518 No account assignment exists for service li ne 0000000000
    Creating SC with Dummy Account Assignment
    Re: Account assignment on SRM
    Re: Problem on account assignment
    Re: Account details not coming while creating a Shopping Cart with Limit Item
    LIMIT SC
    <u>Other related details -></u>
    Use Screen variants (Transaction - SHD0) to change item overview and search result screens.
    BADI - There is one BADI to hide/show some SC item creation links, there is one BADI to control screen details of PO, CTR... but not SC (and not external screens).
    So, as usual, identify the template and change the HTML code in SE80.
    To implement a more complex logic, like the default check box, change the ABAP code (usually in the PBO), if required.
    Do let me know.
    Regards
    - Atul

  • Problem with Unknown account assignment with limit order...reply soon...

    Hello All,
    i am facing problem in <b>confirming the limit order with unknown account</b> <b>assinment</b>.We are using Extended classic scenario with SRM version 5.00 and ECC 6.00. When creating shopping cart with unknown account assignments,  shopping carts is getting created fine but when processing goods receipt the system only prompts for distribution by cost center and we do not have the option to selected processing against other account assignment e.g. internal order or network. the Cost center is coming as gray.What i am expecting that as in known account assignment it asks for a drop down and user can select cost center or order the same should happened with unknown account assignment. we have not implemented any badi for the same.
    please help me out. <b><u>Is this a standard behavior of shop with limit order for unknown account assignment where it prompts for cost center only or do i need to implement any badi.</u></b>

    Hi
    <b>Related links/ SAP OSS Notes to check out -></b>
    Note 861889 - Limitations on limit and service PO's in case of ECS
    Note 1046593 - Limit PO - Unable to delete and create new item
    Note 966323 - Service Item: Not able to create PO in ERP backend
    Note 969077 - LIMIT:SC with Account Assignment Unknown and IR_IND checked
    Note 1000184 - Account assignment error when document transfer to back end
    Note 1052892 - Account Assignment not visible for Limit Shopping Cart
    Note 933618 - Multiple account assignments for limit item are lost
    Re: Limit PO(Item category D instead of B)
    SE 518 No account assignment exists for service li ne 0000000000
    Creating SC with Dummy Account Assignment
    Re: Account assignment on SRM
    Re: Problem on account assignment
    Re: Account details not coming while creating a Shopping Cart with Limit Item
    LIMIT SC
    <u>Other related details -></u>
    Use Screen variants (Transaction - SHD0) to change item overview and search result screens.
    BADI - There is one BADI to hide/show some SC item creation links, there is one BADI to control screen details of PO, CTR... but not SC (and not external screens).
    So, as usual, identify the template and change the HTML code in SE80.
    To implement a more complex logic, like the default check box, change the ABAP code (usually in the PBO), if required.
    Do let me know.
    Regards
    - Atul

  • How can I delete an unwanted template from 'My Templates'?

    How can I delete an unwanted template from 'My Templates'? I created this in error and cannot find a way to remove it. Thanks for all help.

    Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.
    I suggest you update your profile to show your current version of OS X. Click on "Your Stuff" at the top right of this page & choose profile (bottom of the list) then click edit.

Maybe you are looking for