Deleting Duplicate Entries in sender JDBC adapter

Hi i am working on JDBC to IDOC scenario.
When i am fetching the records from the Oracle database table using select query, i am getting the records but its getting duplicated many a times and hence its failing at an idoc processing at ECC side..
Could someone help me in deleting the Duplicate entries and passing only the required entries from Oracle databse to IDOC.
Here is my select query.:
Select a.order_num, a.sap_delivery_number, a.sap_delivery_line_number, a.warehouse, a.product, a.product_size, a.order_qty, a.ship_qty from XXX_h a,tr_log t where a.Prod_id = 101..
Appreciate your help.
Regards

>> Its not picking up the old data instead, it is repeating the same set of data multiple times.
The below suggestion might be helpful
a) First do your select statement
b) Second , Use update statement and here set some flag in that table that these records are already queried. say boolean read = true for the above queried records.
That's it. When you query next time, you will not reread the same data. You will read the new data.
Duplicate Entries: Check with db client tool like Toad or sqlplus and see whether duplicate entries exists in the table. If so, then fix the data first.
Edited by: Baskar Gopal on Feb 22, 2011 1:02 PM

Similar Messages

Sender JDBC Adapter Supports Stored Procedures????

Dear All,
I was trying to use the Sender JDBC adapter to call the Stored procedure in the Sender JDBC adapter is possible to do this???
I don't think Sender JDBC Adapter is supported to execute the Oracle Started Procedures. With my understanding only the Receiver JDBC Adapter will supported for the Stored Procedures using the message mapping Action = EXECUTE and Table = DBO.EmployeeMasterTable.
Please let me know how to achieve the below scenario.
My Scenario JDBC to RFC
Query SQL Statement:
select * from dbo.emp where flag = 'Insert' or flag = 'Update' or flag = 'Delete'
Update SQL Statement:
UPDATE dbo.emp SET flag = null WHERE flag IN ('Insert', 'Update');
DELETE dbo.emp WHERE flag = 'Delete';
In the my update statement I need to update few data flag with Insert , Update and need to delete the of the old records as mentioned above the query.
In the response mapping I am using the Action = INSERT and Table = emp.
Thanks,
Jane F.

Hi Jane,
>>My requirment is to select from the DB and update and delete needs to be done. How I need to call this stored procedure in Sender JDBC adapter.
An example of SP call is mentioned in the previous note Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities
SP Code
          ---------- pkg1 ----------
CREATE PACKAGE pkg1 AS
TYPE numset_t IS TABLE OF NUMBER;
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED;
END pkg1;
CREATE PACKAGE BODY pkg1 AS
-- FUNCTION f1 returns a collection of elements (1,2,3,... x)
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED IS
BEGIN
    FOR i IN 1..x LOOP
      PIPE ROW(i);
    END LOOP;
    RETURN;
END;
END pkg1;
In sender channel mention
>> SELECT * FROM TABLE(pkg1.f1(5));
>>Is this need to be in the one stored procedure right. Can ou let me know how it should be handled in JDBC Adapter.
Yes it shoudl be a single SP. Mention a select statement as given in above example.
What is your Oracle version?
Regards
Suraj

Sender JDBC adapter : Update SQL Statement : stored procedure

Hi,
Can we use a stored procedure in the sender jdbc adapter in 'Update SQL Statement'.
The problem i am facing is like, we are selecting data from two tables in 'SQL statement for query' and then in 'Update SQL Statement' , we need to delete that data from these two tables.
Please let me know if it is possible.
Thanks,
Rohit

you can use a Stored procedure in the
Query SQL Statement
You have the following options:
· Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
· Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
so have your whole select and update as part of this single Stored procedure

Transaction handling in sender JDBC adapter

Hello,
In a scenario where a third party application updates a field (counting it up) and we pick up these counts and zero out the field with the sender JDBC adapter, we would like that the third party application is not able to update while the JDBC sender adapter is processing.
We were under the assumption that the select and update statements of the sender JDBC adapter where executed within the same DB transaction and set the isolation level to "repeatable read" to make sure the third party app. could not update while the adapter is processing.
This had no effect.
Do the select and update statement occur within the same transaction?
Thanks,
Dan
Edited by: Dan Hansen on May 5, 2008 9:58 AM

Thanks for the answers so far, I have looked through this and can find no reason why the current set up with "repeatable_read" should not work... a little more info. We are running against a MSSQL 2005 database using a table with the following structure.
CREATE TABLE [dbo].[OPERATION] (
     [WERKS] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
     [AUFNR] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
     [VORNR] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
     [SSAVD] [datetime] NULL ,
     [ARBPL] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [MGVRG] [bigint] NULL ,
     [LMNGA] [bigint] NULL ,
     [LTXA1] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [ZCONFQTY] [numeric](18, 0) NULL ,
     [ZTIMESTAMP] [datetime] NULL ,
     [ZSTATUS] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [STAT] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [SSEVD] [datetime] NULL ,
     [FSEVD] [datetime] NULL ,
     [FSAVD] [datetime] NULL ,
     [XMNGA] [bigint] NULL ,
     [RMNGA] [bigint] NULL ,
     [RUECK] [bigint] NULL ,
     [ZPACKQTY] [bigint] NOT NULL ,
     [STEUS] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [ZSCRAPQTY] [numeric](18, 0) NULL ,
     [ZREWORKQTY] [numeric](18, 0) NULL ,
     [BEARZ] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [BEAZE] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [RUEST] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
     [RSTZE] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
We read information about the quantities per primary key combination with the select statement where the ZSTATUS field is "CONF" and then zero out the quantity field and set the ZSTATUS to CONF2SAP with the update statement.
Another app counts up the quantities and sets the ZSTATUS to CONF as needed.
Sometimes we see that we miss a count because we read before someone has increased the quantity but update back after they did and thereby zero out their entry.

How to delete duplicate entries in address book

Is there an easy way to delete duplicate entries in Address Book?

I have an iPhone where I create new contact details and a MB Air running OX X 10.7.3
In Address Book I see duplicate entries across the whole book. The other day I was traveling without my MB and needed to urgently reach someone who's number I knew was in my iPhone contact list for sure but searched and search and couldn't find it.
Turns out that when I had been going through the Adress Book on the MB Air trying to eliminate some of the duplicates I had chosed --without even knowing it or realzing it-- the card that I guess sync with my iPhone. It was gone. Sure enough, when I got back and looked it up on the MB Air it was still there not syncing to my iPhone.
I have used Address Book / Card / Look for Duplicates ...
I have also followed the Help suggesting and pressed Control / select to highlight two duplicate cards and even though the First / Last / Company / phone numbers / etc. are all the same I get the message: "The cards could not be merged because they came from different accounts."
I have checked with guys from the office who have the exact same problem with no idea how to solve the problem.
Is it that in order to use Address Book on both an iPhone and an OS X machine you've just got to be smarter, more sophisticated, more IT oriented?
Seems like a pretty easy thing not to be struggling with.
I should mention that I was a Mobile Me subscriber and now use iCloud which I'm sure has something to do with all of this.
But it seems pretty basic to me. If I have an Address Book it should synchronize between OX X and IOS.

How to delete duplicate entries in match code

I want to delete duplicate entries in match code.

If you go down the search exit route, using function module F4_IF_SHLP_EXAMPLE or function module F4_IF_SHLP_EXIT as a template you want it where callcontrol-step = 'DISP'. You would sort the table: SORT RECORD_TAB BY STRING and then delete adjacent duplicates. If this does not wok because of the fields you have in your search help, you will need to select the data into another internal table and match the relevant entries from your internal table with the relevant position in field STRING of RECORD_TAB. The positions in STRING will be as per the order of the parameters you have defined in the search help.
Hope this helps.
Regards
Larissa

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Dynamic query configuration in sender jdbc adapter

Hi,
According my undertsnading in XI.3.0 dynamic query in sender JDBC adapter is not possible.
could any one confirms the possibility of this feature in XI 7.0 .
Thanks,
venu

Hi VJ,
sorry for late responding to your answer.
One of our requirements is the query statement that we write in sender communication channel should be changed dynamically, for example in where condition the condition parameters values required to change.
Thanks,
venu

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

We get "uFF06uFF03x0;" from sender JDBC adapter

Thank you.
This is naoki kurihara.
We have a problem in sender JDBC adapter.
We use java mapping and sender JDBC adapter in PI7.1 on Windows.(DB is sqlserver)
and we test the interface and we found error.
the reason is to get "＆＃x0;" from JDBC adapter.
and our java mapping can't parse it. and we got error.
the column is not null.
how we can prevent "＆＃x0;",
(sorry I cant write "＆＃" 1byte word, so I wrote 2bytes word)
please give me your help!!
Thanks

Hi,
Replace the & character with &amp ; in your java mapping. The same goes for these special characters:
< with &lt ;
> with &gt ;
" with &quot ;
' with &apos ;
Please remove the space between the escape character and the ; in your Java mapping. The spaces are typed here because the equivalent characters are not displaying correctly.
It should be able to handle the # though. Hope this helps
Regards,
Mark

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

Error in XI Sender JDBC adapter for AS/400 DB2

We are trying to connect to AS/400 DB2 from XI's Sender JDBC Adapter. we got the driver from DataDirect (connectjdbc.jar) and configured it within XI .The configuration according to the manual for this jar file is
// Register the driver with the driver manager
Class.forName("com.ddtek.jdbc.db2.DB2Driver");
// Establish the Connection
String url = "jdbc:datadirect:db2://corpserver1:50000;LocationName=ACCTNG";
Connection con = DriverManager.getConnection(url, "test04", "test04");
In XI we configured this as:
Driver = com.ddtek.jdbc.db2.DB2Driver
Connection = jdbc:datadirect:db2://servername;LocationName=NBHAGWAT
and specified the user id and password
<b>Note</b>: The Port Number is optional
When this was done in XI, we got the below error in the Adapter Monitoring:
Sender Adapter v2108 for Party '', Service 'JDBCtoFile':
Configured at 2006-12-19 15:45:31 MST
History:
- 2006-12-19 15:45:31 MST: Retry interval started. Length: 10.000 s
- 2006-12-19 15:45:31 MST: Error: Accessing database connection 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT': SAPClassNotFoundException: com.ddtek.jdbc.db2.DB2Driver
- 2006-12-19 15:45:31 MST: Processing started
Is this because there is something wrong because the way the connection string is specified.
Anybody who has configured XI Sender JDBC adapter for AS/400 DB2, please send us some information on this.
Thank you,
Regards,
Balaji

> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>

Deleting Duplicate Entries in sender JDBC adapter

Similar Messages

Maybe you are looking for