Deleting Logs in The Console

I have been messing around and have found logs...
System Logs, Console Logs, etc.
Is it ok for me to delete those, or will it crash my system?
I just think it's unneeded memory taken up?
Thanks!

Megafast:
Normally logs may be deleted, but, as a general rule, I think it is a VERY bad idea to delete/change operating system components. The amount of space the logs is minimal, and OS X runs daily, weekly, and monthly UNIX routines that delete some rotated logs.
If you wish to delete logs anyhow, a program called Cocktail provides a GUI front end to UNIX routines/services.
As a final note, the logs are there for a reason and can be essential in a troubleshooting situation.
Barry

Similar Messages

Adminserver does not start after deleting oim_server1 from the console

Have deleted oim_server1 from weblogic console and. I wanted to reconfig oim but can't extend the domain anymore as OIM is greyed out.
Please help:
Can't start Adminserver anymore too:
WARNING: Error registering the bulk operations MBean.
java.lang.IllegalArgumentException: WorkManagerMBean 'OIMUIWorkManager' refers to a constraint or request class 'MaxThreadsConstraint-0' but they are deployed on targets that have no servers in common. Please deploy the mbeans so that they have at least one server in common.
at weblogic.management.configuration.WorkManagerLegalHelper.validateTargets(WorkManagerLegalHelper.java:66)
at weblogic.management.configuration.WorkManagerMBeanImpl.setMaxThreadsConstraint(WorkManagerMBeanImpl.java:487)
at weblogic.management.configuration.WorkManagerMBeanImpl$9.resolveReference(WorkManagerMBeanImpl.java:468)
at weblogic.descriptor.internal.ReferenceManager$UnresolvedReference.resolve(ReferenceManager.java:404)
at weblogic.descriptor.internal.ReferenceManager.resolveReferences(ReferenceManager.java:296)
at weblogic.descriptor.internal.DescriptorImpl.resolveReferences(DescriptorImpl.java:328)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:334)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(Edi
THANKS!

Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

How to find out XPath-Errors, that are only logged on the console

Hi,
I'm using the Java-API of XMLP Standalone Version 5.6.2. If my layout contains a german umlaut, like:
<?for-each:Behälter_zeile?>
<?BEFMTB_BEZEICHNUNG?>
<?end for-each?>
I get the following output in my application console when I call RTFProcessor.process() for this layout:
[040609_111900450][][ERROR] [Line 118.183] Incorrect XPath: BehÃ¤lter_zeile
There is no exception thrown and the generated document seems to be correct.
My question: How can I determine such an error in my application? I want to do at least some intelligent logging.
Mirko

Hi Thomas,
According to your description, you want to have a role-specific default member for different roles. Right?
In Analysis Services, when granting access to dimension, a connection will fail if a role restricts access to a default measure. As you mentioned, the best solution is specify a default member for each role. But for administrator role(full control),
it can't set the default member. All tabs except General and Membership are disabled. And the system can determines the default member of current user automatically. It's not supported to get the default member in MDX either.
However, SSAS has additive design for role security. So in this scenario, we just need to create another role for those members of administrator role and specify a default member for this role. SSAS will take that role-specific default member
for these users. And it will not effect the administration permission for them.
Reference:
Default members, MDX Scripts, Security, KPIs and Perspectives
The Additive Design of SSAS Role Security
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Deleting hidden folders and console.log files

I have heard that OS X logs activity of various programs and Applications in hidden folders/files.
Can someone please tell me how to view and delete this information in the hidden folder(s) without compromising my OS X system?
Also, how do I delete information in the console.log folders?
Thank you.
Maverich

Hi Maverich!
The invisible files & folders are hidden for a reason!
If you don't know exactly what you are doing, you shouldn't muck about with them!
The Mac OS X is very good at protecting us from being our own worst enemy.
Your Mac runs Cron Scripts daily, weekly, & monthly, if the Mac is left on 24/7.
If you prefer, you may also choose to run them manually.
Mac OS X: How to force background maintenance tasks (logs and temporary items)
I put my Display to sleep after 15 minutes of inactivity, but never Sleep or seldom Shutdown My iMac, and my Console folder, within the Logs folder is only 276 KB.
ali b

Custom Logging - Either via Console or a Tool...

Anyone know of a way to create custom logs in the Console? I am trying to audit specific events and would like to create a log that would show just those. Anyone know of a tool that logs events such as: failed attempts to read files, delete files, run programs, etc. I use ARD to run usage reports, but a specific tool or ability to log would be awesome. Thanks for any help!

we use kiwi log viewer (about $30). currently it allows you apply color filters based on words, grep searches, etc., but there's no way to filter out stuff you don't want to see or to only display search results. developer says it's on the roadmap. other options are splunk (no experience, full blown version is very expensive, there's a free version...kiwi is more reasonably priced).
don

Unable to log into Directory Console

Hi,
I am using Directory server 5.2.
When I try to login to my directory console , I keep getting HttpException: Response: HTTP/1.1 500 Server Error . I tried both admin and directory manager. I am sure that my user id, password and port is correct, and the admin server is running. I notice some warnings in the admin server logs, but do not know what to make out of it.
[11/Sep/2004:10:36:11] info ( 6194): successful server startup
[11/Sep/2004:10:36:11] info ( 6194): SunONE-WebServer-Enterprise/6.0SP3 B05/14/2003 17:58
[11/Sep/2004:10:36:11] warning ( 6194): admin40_check_ds_availability_init(): WARNING: Unable to determine the location of the User and Group DS (unable to set User/Group baseDN)
[11/Sep/2004:10:36:11] failure ( 6194): Warning! admin40_task_eval_init(): unable to build User Group Info (unable to set User/Group baseDN)
[11/Sep/2004:10:36:11] failure ( 6194): admin40_host_ip_init(): PSET failure: Failed to create PSET handle (pset error = Authentication failed)
[11/Sep/2004:10:36:11] info ( 6196): Installing a new configuration
[11/Sep/2004:10:36:11] info ( 6196): [LS ls1] http://ldap.mic.com, port 390 ready to accept requests
[11/Sep/2004:10:36:11] info ( 6196): A new configuration was successfully installed
[11/Sep/2004:10:36:12] info ( 6196): Using the Java HotSpot(TM) Server VM v1.4.1_01a from Sun Microsystems Inc.
[11/Sep/2004:10:36:12] info ( 6196): Loading IWSSessionManager by default.
[11/Sep/2004:10:36:12] info ( 6196): IWSSessionManager: Maximum number of sessions is 1000
[11/Sep/2004:10:36:12] security ( 6196): for host 0.0.0.0 trying to GET /, admin40_host_ip_check reports: Unauthorized host ip=0.0.0.0, connection rejected
[11/Sep/2004:10:36:57] security ( 6196): for host ldap. trying to GET /admin-serv/authenticate, admin40_host_ip_check reports: Unauthorized host ip=::ffff:192.168.176.12, connection rejected
Any advice is much appreciated.
Thanks.

here is solution:
Sunsolve.sun.com
Document ID:     75322
Resolution:     Top
The reason you cannot log in to the console is because a password
has expired. That password belongs to the admin-serv-<hostname>
user. Don't confuse this user with the normal
admin user in LDAP. Unfortunately, the admin-serv-<hostname>
user is not like the Directory Manager; that is, the password for the
admin-serv-<hostname> user will expire unless you take some
corrective action beforehand, such as adding the user to a group with
passwords that never expire or adding a specific password policy
to the user.
Every time a user (Directory Manager, Admin, and so on) logs in to the
console, the user (admin-serv-<hostname>) needs to successfully bind
to the directory server. If the password has expired, that bind cannot
happen.
To find the user (admin-serv-<hostname>), perform the following steps.
Step 1: Locate the User With the Expired Password
Search for the user (admin-serv-<hostname>) using the following
syntax as an example:
root/edog# ldapsearch -D "cn=Directory Manager" -w <password> -h <hostname>
-p <port> -b o=netscaperoot "cn=admin-serv-*"
The following provides an example of an search for the user:
   root/edog# ldapsearch -D "cn=Directory Manager" -w dirmanager -b
   o=netscaperoot cn=admin-serv-edog
   cn=admin-serv-edog, cn=Netscape Administration Server, cn=Server Group,
   cn=edog.labnet.east.sun.com, ou=labnet.east.sun.com, o=NetscapeRoot
   objectClass=top
   objectClass=netscapeServer
   objectClass=nsAdminServer
   objectClass=nsResourceRef
   objectClass=groupOfUniqueNames
   cn=admin-serv-edog
   nsServerID=admin-serv
   serverRoot=/usr/iplanet/ds5
   serverProductName=Administration Server
   serverHostName=edog.labnet.east.sun.com
   uniqueMember=cn=admin-serv-edog, cn=Netscape Administration Server,
   cn=Server Group, cn=edog.labnet.east.sun.com, ou=labnet.east.sun.com,
   o=NetscapeRoot
   installationTimeStamp=20021218212731Z
   userPassword={SSHA}kZeUzbMMbisvxMnALP3tjk3KGaNmIb8Ih29ddw==
Step 2: Manually Change the User's Password
a) Use the Directory Manager to change the user password attribute in
   the following entry (returned by the command in Step 1).
   cn=admin-serv-edog, cn=Netscape Administration Server, cn=Server Group,
   cn=edog.labnet.east.sun.com, ou=labnet.east.sun.com, o=NetscapeRoot
b) Use the ldapmodify command, as in the following example, with a new
   password, such as "abcd1234":
   ./ldapmodify -D "cn=Directory Manager" -w dirmanager -h <hostname> -p
   <port>
   dn: cn=admin-serv-edog, cn=Netscape Administration Server, cn=Server
   Group,
   cn=edog.labnet.east.sun.com, ou=labnet.east.sun.com, o=NetscapeRoot
   changetype:modify
   replace:userpassword
   userpassword: abcd1234
Step 3: Edit the adm.conf File (<server root>/adm-serv/config)
a) Stop the Administration Server:
   ./stop-admin
Now, change the password in the Administration Server's
adm.conf file so it knows to use the new password to bind
to the directory server.
b) Change the directory:
    cd <server root>/admin-serv/config
c) Use the vi text editor in the adm.conf file to find a line that is
   similar to the following:
    siepid:   admin
d) Edit the adm.conf file so the siepid value matches the new password
    that you created Step 2:
    siepid:   abcd1234
e) Start the Administration Server and make certain that you see no
   "PSET failed" errors in the errors log. These errors indicate that
   there was a problem loading the o=netscaperoot information.
Now, you should have no problem logging into the console.

Mac pro goes to sleep and the error log say "The smart launch will be terminated"

Several times in the last few days my Mac Pro early 2008 has locked up. This occures when leave the machine and come back to it. I see the screen is black and the only thing that I see after clicking the mouse and pressing keys on the keyboard, is the white outline of the curser that will move across the screen. Nothing will bring the system back and my only option is to hold down the power button until the unit shuts down.
I checked the logs in the console and the error message that I see is: mm/dd/yy 9:49:17.719 AM SmartLaunch[31448]: The SmartLaunch will be terminated.
Any clue where I should start looking?
Steve Ornat

That is a great idea to check the memory temperture. Do they have built in temperture senors and then is there a terminal command to run to check that? Also how do I change the speed of the fans, again a terminal command?
I was mistaken, I bought 4- 4GB memory modules, with heatsinks. (8GB were tooooo expensive) It should be good memory but certainly I wonder as this never happened before the new memory was added, 5 or 6 weeks ago.
My memory config is:
2 - 1 GB (orginal whe n I got the sytem)
2 - 2 GB added 1 year ago from OWC
4 - 4 GB added 6 weeks ago from ??
Good suggetions about the hard drive. I did add a new Seagate 3TB drive a year ago when I got this machine, and I use it for all my data stoage and tunes and pixs and only use the 250GB dirve of OS and apps. I have not installed the OS and apps on the 3TB drive and that would be an easy thing to do.

Deleted Items Exception - The Full adapter threw an exception

Running SCSM 2012 R2 UR3, when trying to access the 'Deleted Items' view, the console has an exception:
Application: Service Manager Console
Application Version: 7.5.3079.0
Severity: Error
Message: An error occurred while loading the items.
Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportException: The Full adapter threw an exception. See the FullUpdate property to see the exception.
   at Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportAdapter.DoAction(DataQueryBase query, IList`1 dataSources, IDictionary`2 parameters, IList`1 inputs, String outputCollectionName)
   at Microsoft.EnterpriseManagement.UI.DataModel.QueryQueue.StartExecuteQuery(Object sender, ConsoleJobEventArgs e)
   at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Any suggestions please? is this a known issue?

Yep, that's the problem I had. SQL is trying to union more tables than it can handle..hence the failed query plan. Removing some of the SCSM classes (and thus removing SQL tables) is an approach..but it's a bad approach.
There may be a SQL solution. There may be some kind of threshold that can be adjusted or query plan settings that can be tweaked..I'm afraid I simply don't know (As I've told people many times, I only know enough SQL to be dangerous :) ).
The other approach we used was to create specific Deleted Items views that targeted specific classes. It didn't solve the problem, but it at least gave us the ability to permanently remove or restore objects of some classes from the console.
I can say that I haven't seen the error in at least 3 months (this problem originally occurred back in March). But, again, we've tried to keep our deleted items around 5000 by regularly cleaning it out.
We're on R2 UR2, but I'm afraid I don't know if it was fixed in that update or a previous one..or if it's been fixed at all.
I've said "I don't know" a lot in this post..I'm sorry I'm not much help with this one.

Cannot delete users from the Central Management Console

I cannot delete users from the Central Management Console. I'm logged in to Enterprise as administrator but still get the following error:
There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
Thanks in advance for any help on this matter.

Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
Check top level:
Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
Then set for the Users top level folder:
In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
And if you still can't delete it, verify the groups:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can.

SUDO is causing entries in the console log. A Virus?

Hello,
I was looking through my OSX installation and I found this mysterious file placed in my Application Support Folder in my library:
username/library/application support/7103555
It is named "7103555" and it is a Unix Executable File (according to "Get Info")
I am worried it might be a virus. I don't recall putting it there. The only time I used terminal so far was to open a Profile Manager for Mozilla Thunderbird. I see that it mentions PrinterNotification and I do recall installing an HP printer driver. Is that where it might have come from. Is this normal? May I delete it? Should I reset something back in console? I am not sure what to do here.
Should I be concerned?
Thank you for any advice.
This is what it looks like when I open it:
cd /System/Library/SystemConfiguration/PrinterNotifications.bundle/Contents/MacOS
# SUDO is causing entries in the console log making me believe
# that it's not getting run correctly. I am removing SUDO from the
# command lines.
#sudo ./makequeues -u
#sudo ./makequeues -r
./makequeues -u;./makequeues -r&
exit 0

Mulder,
<<sarcasm mode on>>
You got me there: I can't even spot a simple shell script and figure out what it does and why. Nor could I explain it in plain 'Merican English to poor ol' rainforest. Nope, I must have absolutely no idea what I'm talking about.
<<sarcasm mode off>>
HINT: This is well within my area of expertise.
To quote one of your compadres, who "borrowed" it from answers.com:
"computer virus n. A computer program that is designed to replicate itself by copying itself into the other programs stored in a computer. It may be benign or have a negative effect, such as causing a program to operate incorrectly or corrupting a computer's memory."
A little further on in the same page:
"Virus
Software used to infect a computer. After the virus code is written, it is buried within an existing program. Once that program is executed, the virus code is activated and attaches copies of itself to other programs in the system. Infected programs copy the virus to other programs."
and
"Viruses Must Be Run to Do Damage
A virus is not inserted into data. It is a self-contained program or code that attaches itself to an existing application in a manner that causes it to be executed when the application is run."
On to Leap-A, from the description in Macworld (edited for brevity and clarity):
"...[W]hen you try to launch the newly-infected application, an apparent bug ... in the code prevents it [the application] from launching. But, ... a lot just happened:
A Spotlight search for the most-recently-used user-owned applications is run, and ... up to four of those programs at a time are infected...
The above process will repeat each time you try to launch an infected application."
The process described above fully conforms to the definition. Therefore, your, uh, "1337" assertion is wrong: Leap-A IS a virus.
-Wayne
PS I'll even make a more radical assertion: The first OS X viruses were written in 1983 by Fred Cohen. My source? Professor Cohen (after all, he invented the computer virus), who told me, "the first viruses written for the original experiments run on current Mac OSX systems without even a recompilation."

I didn't get log statements in console after deploying the war file IN WAS6

I am new to web sphere 6.o server, I didn't get log statements in console after deploying the war file into the WAS

Albenn
Welcome to the Apple user discussion forums
I'll hit a few of your questions - others will have to do others since I'm not up on some of the issues you ask about
4) is there an easy way to review/delete items (in 6, i run a basic slideshow and delete on the fly -- is this still workable in 7?)?
Yes
5) Are there significant functionality benefits of 7 over 6 (e.g., does the noise function or shadow/highlight really offer significant benefits? The Events seems obvious, but I'm more interested in "under the hood" experience
Yes
Loseless editing - web galleries - events
a) Is import any faster? As my library is growing in size, the import is getting overly slow
It is fine for me (only you can compare to your current) - I have 20542 items using 26.3 GB in 271 events
7) Is there a full-screen edit mode?
yes
8) Can you configure events so that it's not just by day?
yes
9) Is 6's "roll" structure as mirrored in the file system still available in the Events approach, or is the database structure that once you've converted a library, there's no going back?
Events replace rolls (if your rolls are named - NOT the default rollxxx name - they will come across as is - to me events are rolls with much more capability and a new name - some people are VERY putoff by the change (but most love it) for reasons that I simply do not comprehend
10) What is the effective (or advised) maximum library size? I've probably got over 60GB of images in my libraries now, with 20,000 images or so. If 7 can readily digest them (and preserve all my albums, etc.), then I'd love to combine them into one, unless that will kill performance, make the database unstable, drive backups into interminable waits, etc.
The advertised max is 250,000 photos - I have about the same number of photos as you in about 1/3 the space - there are a few users here with libararies your size. With iPhoto Library Manager it is easy to maintain multiple libraries if you choose
LN
Message was edited by: LarryHN

*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
J

Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM

I ran an iTunes update on a PC Win 7 and got "apple mobile device failed to start verify that you have sufficient privileges to start system services" ? I deleted iTunes, ran download, and now I can't reinstall. I am logged onto the PC as Administrator.

I ran iTunes update 11.1.4.62x64 on a PC Win 7 and got "apple mobile device failed to start verify that you have sufficient privileges to start system services" and got kicked out of the install process? I deleted iTunes, ran download to reinstall, and now I can't reinstall - same error message. I am logged onto the PC as Administrator. How do I downlaod and install iTunes.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How do I keep BI Publisher running when I log out of the console in linux?

I am using the standalone version of BI Publisher and I want to keep it running even after I log out of the console. I have a script that starts it so I typed 'nohup start_bipub.sh &' but when I log out it shuts down anyway. I started my apache server the same way and it still runs after I log out so the only thing I can think of is that X is being killed due to the logout and BI Pub needs it. Is there anyway to keep this process running?
Thanks,
Denise

It depends on the data path from the tower you're using, through NATs and many routers, all the way back to the server. Which depends on your current location and sheer luck.
For some users, the data path stays alive for 30-45 minutes at a time... thus the phone only has to ping the server that often for push to work. Their push doesn't use much battery.
Other users have the misfortune of being connected via pathways that only keep a connection alive for 5-10 minutes. Their iPhones eat battery like crazy, and they usually end up switching to a 15-30 minute timed fetch instead.

Firefax hangs in remote desktop when another user logs in on the console

When I work with remote desktop on a windows 7 pc I could always use firefox without any problem, even when someone else was logged in on the same windows 7 machine. Siince the update of firefox to version 13, ff hangs in the remote desktop session as soon as someone else logs in on the wndows 7 console.

To be specific, this problem occurs in a multiple concurrent user configuration (=hack), where the RDC user and console users are simultaneous users. Firefox will hang, using 50% of the CPU. As soon as the RDC user walks over to the console and switches to that user the hang is released. The behavior is new to v13 and is highly reproducible.
For more info on multiple concurrent users:
[http://www.missingremote.com/guide/how-enable-concurrent-sessions-windows-7-service-pack-1-rtm http://www.missingremote.com/guide/how-enable-concurrent-sessions-windows-7-service-pack-1-rtm]

Deleting Logs in The Console

Similar Messages

Maybe you are looking for