Deleting or retrieving leftover data from removed, screwy app
Hello there,
I recently had a **** of a time with the 'recorder' app on my iPhone. I restored to a backup of my phone and deleted the problem application.
But the 316 MB of "other" data which is all my voice recordings from the app didn't go away! Do I have to do a factory restore and start from scratch to get my disk space back?
A restore is probably the only sure solution. However, reinstalling and then deleting the offending App without making any new recordings may cause it to clean up the space. It just depends on how the App was written.
Similar Messages
-
How to retrieve lost data from the quickvoice app on the ipad 2?
I recently updata my iOS device on my ipad2. i backup my files before i updated but when i come to resore all of my backup files, all my new photos, documents ect have gone. I dont know whether the files didnt get backup properly, i dont know. The documents and my new photos are not really my consern. I had the quickvoice recorded app on my ipad and had two recordings on there which are really important to me and have dissapeared. Is there anyway i can get them back? Please help!
I have actually solved my problem myself. I was resoring my backup data through itunes but my quickvoice recording were backup in icloud, my icloud setting on my ipad2 mesions that my files are backup up automatically so i just pressed resore again (in the summary page on itunes) and when through the process again but this time chose icloud to restore my data not itunes.
-
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
Retrieval of data from time capsule
My MacBook Pro was declared dead yesterday. I bought a MacBook Air to replace it.
I paid to have data transfer from my time capsule. We are two using it. I got home and found out my data was not on the MacBook Air.
I need to:
(1) delete the data that is not mine
(2) retrieve my data from the time capsule.
Since my MacBook Pro was dying/ corrupted for over a week, I was informed that some of the backup is partial. I need to go back to the last complete backup.
Your help in explaining how to (1) delete and (2) retrieve the data would be greatly appreciated.I'm nohow a expert on TimeCapsule, however Pondini is and this is his site...
http://pondini.org/OSX/Home.html
If for some reason you can't get your data off via that means, there ARE more brutal options available and I've covered them here
https://discussions.apple.com/docs/DOC-3172
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually. -
How to retrieve input data from a HTML form in the UTF-8 cha
I encountered the following problem with a JWeb Application:
I tried to write a JWeb-Application for OAS 4.0, that retrieves
input data from a HTML form and writes it into an Oracle
database.
All processing should be done in the UTF-8 character set.
The problem is, that the form data retrieved by getURLParameter
are always encoded in a non-unicode character set and I found no
way to change this.
Can anybody tell me what I should do to get the form data in the
UTF-8 character set?
nullHi
Try set in the JWEB application's Java environment such
SYSTEM_PROPERTY: file.encoding=UTF8.
Andrew
Thomas Gertkemper (guest) wrote:
: I encountered the following problem with a JWeb Application:
: I tried to write a JWeb-Application for OAS 4.0, that
retrieves
: input data from a HTML form and writes it into an Oracle
: database.
: All processing should be done in the UTF-8 character set.
: The problem is, that the form data retrieved by getURLParameter
: are always encoded in a non-unicode character set and I found
no
: way to change this.
: Can anybody tell me what I should do to get the form data in
the
: UTF-8 character set?
null -
I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account. It won't do anything to the data on your phone or in your iCloud account. If you don't need to backup you can delete it. (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup. Then your phone will back up to your computer each time you sync it with iTunes.)
-
Is there a simple way to retrieve the data from a resultset using JavaBean?
I have a result set from a select * from users where userid = xxx statement. However, at the moment I have had to hard code the remainder of the code to get the data from each column as I need the column name as well as its data.
I had read somewhere using java beans and reflection it is easier. But i do not know know how.
Is there a simple way to retrieve the data from a result set ?
thanks in advance-
kgWell, it is not really simple. But there are Open Source components to simplify it for you. See e.g http://www.must.de/Jacompe.htm - de.must.dataobj.DataObject and its subclasses. Feel free to contact me if you have any questions: [email protected]
-
Is it possible to retrieve the data from maintainance view?
Hi experts,
Am facing one problem.
Is it possible to retrieve the data from Maintainance View ,If yes how?
IF it is not possible then Y?
While am trying to retrieve data from maintainance view it's showing message like
"it is not a database view or table".
Can u pls give me ans.
Thanks&Regards,
Arun.Hi Arun,
It is not possible to retrieve the data from Maintenance view. Maintenance View is different and Database View is different.
Maintenance view : Maintenance view permits you to maintain the data of an application object together.The data is automatically distributed in the underlying database tables.
A standardized table maintenance transaction is provided (SM30), permitting you to maintain the data from the base tables of a maintenance view together.
In other words, Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Database View: Data about an application object is often distributed on several database tables. A database view provides an application-specific view on such distributed data.A database view is automatically created in the underlying database when it is activated.Database views implement an inner join.If the database view only contains a single table, the maintenance status can be used to determine if data records can also be inserted with the view. If the database view contains more than one table, you can only read the data.
Database views should be created if want to select logically connected data from different tables simultaneously. Selection with a database view is generally faster than access to individual tables. When selecting with views, you should also ensure that there are suitable indexes on the tables contained in the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa -
Problem: Unable to retrieve workflow data from MDM repository
This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
Can any one please help me in this !Hi
As Felix mentioned, it might be a version compatibility problem.
You have also mentioned that mail server is not working for that do this
Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
If u need anything this let me know.
Regards
Hari -
Error while retrieving bulk data from mdm in staging server
I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PMCan you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
How do I retrieve lost data from my phone
1.previously sync/downloaded iphone to a pc
2.February during a sync process, i unplugged the cord.
download was not completed.
3.Lost info from February to May
4.How do I retrieve #3 above.
5. Need to sync current data
Happy Labor DayThank you for responding
correction.
I previously synced my iphone to my pc.
After May, I was trying to recync my iphone 3 to the pc again.
prematurely unplugged the download.
now my feb-May data is lost on the iphone, but according to the apple store, it is still on my pc.
apple store said i have to call customer svc to retrieve this data from my computer.
it is doable. -
How to retrieve the data from Website and Upload it in SAP table?
Dear ABAPers,
I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
Thanks & Regards,
Ashok.Dear Abhishek,
Thanks for your reply.But my requirement is not met.
If i execute the program it should retrieve the data from particular website.
Thanks & Regards,
Ashok. -
How to retrieve the data from SAP-BAPI by using VB Code
Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
oZEmp_Header.Value("ADDR1") = txtAddr1.Text
oZEmp_Header.Value("ADDR2") = txtAddr2.Text
oZEmp_Header.Value("CITY") = txtCity.Text
oZEmp_Header.Value("PHONE") = txtPhone.Text
boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
x = oreturn.Value("Message")
If x = "" Then
MsgBox "Transaction Completed!..."
Else
MsgBox x
End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
SapConnection.logoff
SAPLOGIN = False
Exit Sub
LogoutFehler:
If Err.Number = 91 Then
Exit Sub
Else
MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
Set FunctionCtrl = CreateObject("SAP.Functions")
Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
SapConnection.Client = "010"
SapConnection.Language = "EN"
SapConnection.System = "PR1"
SapConnection.SystemNumber = "00"
'SapConnection.Password = ""
SapConnection.GroupName = "PR1"
SapConnection.HostName = "168.9.25.120"
SapConnection.MessageServer = "168.9.25.120"
If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
Set SapConnection = Nothing
DoCmd.Hourglass False
MsgBox "No connection to SAP R/3 !"
SAPLOGIN = False
SAPLOG = False
Exit Function
End If
SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
If Not SAPLOGIN Then
If Not SAPLOG() Then
MsgBox "No connection to SAP !", 16
SAPLOGOUT
Exit Function
End If
End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
If func1.exception <> "" Then
MsgBox "Communication Error with RFC " & func1.exception
End If
DoCmd.Hourglass False
SAPLOGOUT
Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
MatDescr = "PART NO. NOT FOUND"
End If
End Function
Maybe you are looking for
-
Download stopped midway and is now lost, how do I get it back?
I had a Digital Copy of the Hunger Games that I had redeemed and was downloading. It got down to 12 minutes from being finished (after probably around 4 hrs) and then iTunes froze and had to be shut down. This caused me to lose the download and I can
-
Pls send sales managment query
colunm names: s.no,name,address,date of purchase,warrenty years start and end,brand name,etc.... suppose u have any extra details and adddit....
-
Is there any native reader for XML feeds in Mountain Lion? Mail doesn't seem to support it. Where did it go?
-
Premiere Elements 9 doest start
elements 9 doesnt respond after clicking new project. I click on new project then it seems like its working then nothing. i click on it again then it just goes back to the desk top. I have tried uninstalling it, then restarting computer the reinstall
-
Receiving calls from Husband's phone on my phone
Why are my husband and I receving each other's phone calls. He is receving my calls on his phone and vice versa. This only seems to happen when the phones are close together. this just started happening when he recently upgraded to an iphone 5S.