Delivery analysis / Looking for a BEx solution

Hello everybody,
I'm looking for an easy solution within the BEx. I would like (if possible) to avoid touching the data model.
Here what I would like to achieve:
Description of my desired report: delivery analysis ( number (quantity) ofdeliveries with X positions ).
Output should look like this:
                            number (quantity) ofdeliveries with X positions
Country              X=1        X=2      X=3    X=4    X=5   X=6   X=7   X=8   X=9    X= more than 10
FR                        1451   407   377 and so on
ES                        177     40    24   and so on
IT                          173     66    44   and so on
For me its quite tricky. In my Cube (Multiprovider) there should be all information included.
I have country, delivery (itself) , number of deliveries, number of delivery positions )
How can I do that. Maybe with new calculated figure and a condition. Any ideas?
Hope to hear from you.
Best regards Harry

steffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Looking for a headphone solution editing surround

Looking for a headphone solution when editing suround environment in Soundtrack Pro 2. I have a Mac Pro. Is there any phones that would connect (direct or indirect) to the optical audio output, or do I need to buy a 5:1 speaker sound system with headphone jack?

Hey sorry for the late reply, I was busy to figure out alternatives as harman kardon was a difficult affair to find and acquire, but the good news is I managed to get hold of alternative.
Sony I assume recently launched a Bluetooth headphone DR-BTN200 which is compatible to my MacBook Air , iPad mini and android phone galaxy s2 with ease, the sound quality is pretty good as compared to other brands of Bluetooth headphones I checked compatible or incompatible to apple devices alike, this is definitely what I was looking for, costed me 7990 INR, this is highly recommended for ppl who are confused, I carried my devices to the store and checked before I bought a pair and pretty much happy,
The best part of this is its battery backup, I have used this hours for 3-5 days but this has not drain even then, but I do keep this charging once in 2-3 days just to keep this ready otherwise it does not even ask for it neither the quality of sound drops after 2-3 days of use.
This is over the ear headphone which is very soft but it's get sweaty around the ear I guess that's bound to happen.
Do get back to me for any other details, would be glad to share with all :)

Looking for a nice solution for different cases with nearly same operations

Hi everybody:
I'm looking for a nice solution for the following problem:
I'm measuring different data at the same time (with different devices).
I would like to save these data all in one array (or cluster?), but I
don't know exactly the way to do this. All values have corresponding
time values. So for one data type it would result in a 2d array,
wouldn't it? But how can I save different data types with their time
values in one array? Or should I take a cluster? And how can I get only
a certain type of data out of this array or cluster again? E.g. if I
only need data type "3" with its time stamps for evaluation? I would
really appreciate an example, I work with LV 7. Thanks!
Then - for evaluation - I only need one data type of these different
data. Which one I would like to choose via the frontpanel (it changes
from test to test). So, I thought of a case structure (where I can
choose which data type and correspondingly which evaluation way). The
evaluation steps for the different data types are quite the same, but
can vary in order of execution. I could write for every case the
(nearly) same evaluation steps, but this would take a lot of time, plus
if I need to change one step I need to change it in every case.
Does anybody know a better way?
Thank you very much in advance,
Steffi

steffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time .

My printer is a Samsung ML-2010R. Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro. Previously, I was running Mac Os X version 10.5.8 through this printer on a 4 yr old Macbook. Any further help is most appreciated:-)

My printer is a Samsung ML-2010R. Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro. Previously, I was running Mac Os X version 10.5.8 through this printer on a 4 yr old Macbook. Any further help is most appreciated:-) Humbly, bowiej

Apple seems to be naming their operating sytems usability based on the respective turd size of the feline in question. Lions are big, very, very, very big.
I had a system that served me well for 2 years until I mistaking bought a new machine which runs mega-turd (Lion). Foolish me, now nothing works properly, its a daily struggle to get anything working smoothly using my NEW mac mini. All my other machines work fine, even the windows machines and my Android tablet see all the network components and can talk to each other.
My Internet service is over 3g which I share to the house using internet sharing via my brand new €800 mac mini running POS Lion, everytime the service is interrupted, Kaboom, the mini resets the DHCP server, but doesn't seem to refresh any of the components so connections drop everywhere.
Its amateur hour at Apple folks.
There are several posts alone relating to internet sharing, I have submitted a bug report relating to the non user controllable DHCP server (which may be at fault), but the response / solution from Apple was lacklustre and ultimately didn't work.
See this, there are some work around's in there;
https://discussions.apple.com/thread/3771614?start=0&tstart=0

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

Looking for a simple solution: setting up a reply posting board

Hi.. I use dreamweaver and am looking for a fairly simple
solution...
How can I set up so viewers can post a comment after an
article and the only validation needed is registering by email?
ANy suggetsions would help ...
my user rating of dreamweaver is 5 out of 10.. 10 being
professional.
SImilar to this link
http://www.cbsnews.com/stories/2007/01/17/entertainment/main2365259.shtml
Thanks
-Luis

Hi OrganicBooks, and a warm welcome to the forums!
NAS seems to be all the rage these days, but having tried most backup methods available, I use Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
To backup any/all of my computers to Firewire drives on any other Networked Computer.
This method requires the Computers to be running, though it has an option to start the backups when they show up on the network.

Looking for 2 Product Solutions for eCommerce site created in Muse and published to BC

Seeking suggestions for 2 separate BC eCommerce website product applications: I have within BC so far about 200 image in the in a folder in the "File Manager" -AND- each image has been optimized as a low-res digital image down-load product (divided among 20 catalogs).
#1. Image downloads not for individual purchase but as (a bundle of 6 for one price) and (a bundle of 13 for second price) only.
I'm trying to customize two BC products a 6 Pack & 13 Pack of digital image downloads. Normally in BC, a visitor could purchase a single image as a downloadable product and after successful check-out they would receive an email containing the download links. I need to disable single unit purchases and enable the customer to ONLY select 6 images for one price -or- select 13 images for one price. After successful check-out they would receive links for either 6 download files or 13 based on their purchase. They could also purchase multiple pack sets.
#2. Allow the site visitor to select 12 images (from 200 images among 20 catalogs) for a 12 month custom calendar which would be printed and shipped. The BC product here would be a 12 month custom calendar. I have a product listed in BC as a "12-Month Custom Calender" and a display page titled the same. I have been looking into a drag n drop system that would allow the visitor to: purchase the product > select 12 images > submit their select by email to site admin.
I have limited coding skill and I should mention that I originally created and continue to add-on to the site with Adobe Muse. Because I chose to use Muse, I have been looking for solutions that I can embed in Muse pages as "Objects" as Muse will over-write BC custom elements as it is over-written. I have looked at either using a 12 field drag n drop which might work but I can't determine how to make the 20 catalogs available on the same page to select from.
Can ANYONE offer suggestions?
Thanks

Sorry but in no way will you get that to work using Muse.
You need to custom trigger the core functionality BC fires to add to cart in the system as well as update the visuals etc, and also overcome some of the BC scripting and what that does and function overrides etc. You need a high end front end developer at the least to be able to help you, and not using Muse.

Looking for a correct solution for fast external drives

It is unfortunately after having bought already 8 LaCie external drives of 500 Gb to 1 Tb a few years ago (Firewire 400/800) for my MacPro that I heard from this forum that I should never use these drives for video backup because being unreliable. The poeple who said that were right. Out of the 8 drives, 6 are now dead (disc failures) and lost some precious files.
So now I am looking for a more reliable solution : I read somewhere that I could have for external storage a PCIe SATA controller w/ RAID performance; a solid SATA case for 4-8 drives perhaps. But when looking at SATA controller on the web, I am not certain whether all these cards work on a MacPro (the first Intel 2006 model with Mac OS Tiger 10) or just with Windows. Can someone advise me on what would be the right SATA card to buy for that computer, where to find them and what case I could link it to to install several hard drives ?
(By the way, my 4 hard drive racks inside the MacPro are all used already.

I’m on my third G-Tech external drive and I love their quality. I simply grew out of one and gave it to my son. The new mini works great too although my MacPro doesn’t like it when I partition the drive. It tends to stutter a bit and can lock things up on the MacPro. Still, I plan on buying the G-Safe as soon as I can. They certainly offer RAID Enterprise units although I haven’t used them. G-Tech uses Hitachi drives as the company is owned or associated with Hitachi. Either way, they’re hard to beat.
http://g-technology.com/products/g-speed-q.cfm
Message was edited by: Digital Dude

Looking for a clone solution for Oracle WebCenter Content, Imaging and related products

Hi,
We are looking for a manual or automated cloning solution for Oracle WebCenter Content (UCM), Imaging (ICM) and related products. Oracle FMW has T2P cloning option, but we are looking for more specific to just this product to clone and configure (if needed). Any help is appreciated.
Best Regards

Hi
Assuming you have set up Purchasing with accrual method on receipt (and not on period end), you could enter the PO lines with receipt required. The receipt transactions you are uploading will generate the accounting to charge the expense accounts / or inventory valuation account.
There is no need to interface those also to Payables. In AP enter one invoice with the real monthly amount and match it to the purchase order level or to the receipts level. Approve and pay that invoice.
Dina

Hi, I am looking for a printing solution for iPads in the office space, my question is how can I print from iPads and if the iPads are connected to a wifi router on a network would I be able to print from a networked printer?

Hi
We are looking at placing iPads in our offices but need to understand the printing options available? I have a number of questions?
1/ Would I be able to print to a networked printer?
2/ what would be the best WIFI Printer available for extensive printing?
3/ Are there any other printing options available?
Thank you in advance!

The roll over logs all have the same name exact the extension is .lo_ , So.. I'm not sure what you are looking for.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Looking for longlife storage solution - is tape still an option?

hi there,
im looking for a long life and very safe way for backing up 6 TB of data.
is the magnetic tape option reliable? or what would u suggest to go for?
thx
manuel

Tape is still very much a viable option, and is used regularly to backup petabytes of data on a daily basis.
At that capacity there are basically three different formats to consider, AIT (developed by Sony), LTO (from IBM/HP), and SDLT (from Quantum).
Of the three, LTO offers the highest speed and tape capacity with an LTO3 tape holding 400GB native (800GB at 2:1 compression) and a speed of 80MB/sec.
Behind that comes SDLT-II at 300GB per tape and 36MB/sec (the newer, bleeding-edge SDLT-III drives run 800GB per tape at 60MB/sec).
Trailing the list comes AIT at 200GB per tape and 24MB/sec.
Clearly, to manage terabytes of storage you need more than one tape, which is where autoloaders and libraries come into play - a chassis that contains multiple tapes and some robotic mechanism that transports the tapes from their storage bin to the tape drive mechanism itself. Larger units support multiple drive units in the box and potentially hundreds or thousands of tapes.
As for interface, SCSI is the predominant interface for tape backup, although Fiber Channel is sometimes an option.
There are FireWire options, too, but this is unlikely to be viable for your volume of data.
As for vendors, consider Quantum, Overland, Exabyte and ADIC.
Of the vendors mentioned, ADIC are probably the best at the high-end with Overland my preferred mid-level systems, and Exabyte at the lower end.
You should look at your data to decide a backup strategy before you go much further, though. Even though you have 6TB of data, you may find that once you have that backed up you only have a few hundred megabytes or gigabytes of data that changes frequently. Any decent backup software system will manage this for you, taking some of the pain out of knowing which tapes are needed when it comes to restore.
On that basis you may be able to leverage a lower-end tape library to manage the smaller amount of daily backup load rather than a 10TB monster capable of backing up your entire data set in an hour.
Also, when it comes to backup strategies, consider the value of a disk-to-disk-to-tape system (D2D2T). These systems backup data very quickly to disk-based storage and then backup the disk-backup to tape. This reduces the time it takes to backup the critical data and also means that recent changes can also be restored from disk, without the overhead of loading the correct tape and reading the data from there.

Looking for the best solution for downgrading a database from 11.2 to 11.1

we have an install of 11.2 grid and have made several attempts at adding 11.1 binaries and using the 11.2 infrastructure. we patched, etc... but all of our attempts failed in getting 11.1 to work across the cluster.
we have decided to make all of the installs version 11.1.
I am looking for the most straight forward approach to migrate our 11.2 down to 11.1 with the least amount of downtime.
thanks, tom

Hi Tom;
Please check below note
Master Note For Oracle Database Downgrade [ID 1151427.1]
How To Downgrade From Database 11.2 To Previous Release [ID 883335.1]
I belive it will answer all your question.
Please also check below links:
http://blogs.oracle.com/db/2010/09/master_note_for_oracle_database_downgrade_doc_id_11514271.html
Regard
Helios

Looking for a better solution to the "Save for web" color shift issue

Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
Nothing new here.
Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
Anyone know of such a beast? I would gladly pay for a plug-in that really works and fixes the problem.
And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
Anyone got a decent solution for this?

Chris
I spent all day Googling and doing side by side comparisons of my old and new systems.
My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
Thanks

Looking for a headphones solution for 5th generation iPod

So my headphone jack no longer works (technical problem). As a result I need headphones that plug in via the dock connector instead.
A little over a year ago I bought (what I think was) a remote/headphones combo device that solved my problem. The remote plugged into the iPod, and then the headphones plugged into the remote. Problem solved.
I have now lost this device, and whenever I ask the Apple Store for something similar they have no idea what I'm talking about.
Any help in either identifying the device I had before or coming up with a new solution would be greatly, greatly appreciated. I'm ready to pull out my hair at the moment. I refuse to replace a $300 dollar piece of equipment just because I'm having trouble finding something that used to be on the market.

SpringFaery, you didn't say what specifically is wrong with the headphone jack, so I don't know if this will help you or not. I have a 5th generation iPod 30GB that just started having problems with the headphone jack. One of the earbuds was losing sound intermittently. I checked the headphones on other devices and they're fine. The same problem happens when I try other headphones on the iPod, so I assume the problem is the headphone jack.
I found another thread about sound problems with 5th generation iPods in this forum that said that pressing on one corner of the iPod fixes that problem, so I tried doing that on my iPod and it works fine now. I used a 2-inch binder clip and put it on the right side of the iPod, in the upper corner under the headphone jack. I have a leather cover on the iPod, so the binder clip is over that. The sound is back to normal now so I'm happy with this "usermod" fix. If your problem is similar maybe this can help.

Delivery analysis / Looking for a BEx solution

Similar Messages

Maybe you are looking for