Delivery document is completed,but post goods issue.

dear :
devlivery docuemnt is set completed by Manually closing completed deliveries(programme:SHP_DELIVERY_COMPLETE),but it cann't post goods issue .so stock is exist .
how can i consume the stock ?
please help me analyse it .
best regards.

hello,
Check whether there are confirmed schedule lines in the sales order for which the delivery is made.
Also check if the storage location is there in the sales order
Regards
Mahesh

Similar Messages

Accounting Document not generated after Post goods issue in delivery order.

Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__

Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo

COPA document not generated when Post Goods Issue is reversed.

Hello Friends,
WE uses Stock Transport Order in two steps for transfering Stock from one plant to another. We have defined a Condition type FRB1 to capture the Freight cost involved in the stock transfer.
When the Post goods issue is done for the Stock Transport Order. following Accounting documents are generated.
Accounting
Profit Center
COPA
Spec. Purpose Ledger
Controlling Document
Material Ledger document.
But When the Post goods issue is reversed through transaction code VL09 all the above documents are generated except for COPA document. Though in controlling document it shows the object type hit is REO i.e profitability Analysis
For further information we have mapped cost element (600150) with Value field in PA transfer structure (Direct assignment from FI and MM. Movement type used for PGI are 641 & 642.
Thank you

Dear Colleagues
I thank all those who put in thier time and efforts for possible solution for my problem. But I could resolve this issue with help from SAP.
Basically in costing based COPA the system does not post the cost of goods sold to COPA during goods issue but it is done at the time of posting the invoice since the system wants to see the revenues and the COGS values together.
Since the system posts the COGS into COPA at the time of invoice posting, you will appreciate that if this is also done during goods
issue then you will have duplicate entries in your COPA (i.e. the COGS will be doubled).
If in transaction VL01N/VL02N a costing-based line item would be posted, the costs would be double in CO-PA (the billing and goods issue). For this reason, no costing based line items will be created in the standard R/3 system for transaction VL01N/VL02N.
If for some reason you still wish to post the COGS to COPA during goods issue you have to do the same thro a modification of the system.In your case you have applied note 214381 for the same. Please note here that movement type '641' is used as an example. For other movement types you will need to code accordingly.
as per note 337488 point 2. the changes of note 214381 were not required in our case. Therefore we reverted these changes in LKEIIF01 and added the relevant coding for movement type 642 in function COPA_DOCUMENT_CHECK as per note 337488 point 2.
Looking forward for your continued support
Regards
Umesh Gothankar

Post Goods Issue for Outbound delivery return

Hi, I'm trying to Post a Goods Issue for a returned outbound delivery but I cannot find a function module to do this, I tried using SD_DELIVERY_UPDATE_PICKING but its creating the material against the outbound delivery with status archived, which means it wasn't created.
I also tried using the MB_CREATE_GOODS_MOVEMENT, but this one is creating the material document but not updating the status and the document flow of the delivery.
Thanks,
Pablo

Hi Lopez,
Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
Regards,
Sravanthi

Sales BOM - Delivery Quantity check during post goods issue

I am working on a problem in my company. We are running ECC6.0 ehp 4. We are using standard ERLA functionality with sales bom (5) for product kits. Delivery manager has requested that we investigate a system check during delivery post goods issue. THe problem is that when shipper processes delivery, if they have to backorder they update pick and delivery quanity on the TAE item. They should also update TAQ delivery quantity, so that backorder amount is correct. If they make data entry error, backorder quantity is incorrect. The delivery manager has tried a number of attempts to re-train and correct mistakes. He is now asking that SAP issue a hard error if TAQ and TAE delivery item quantities are not the same.
I have searched on SAP Notes, Forms, and Google and do not see solution. I know that at delviery item category there is a minimum qty check for the item category. I've not found a user exit or configuration point that checks quanities. Does anyone know of out of the box solution? Or where would I put in custom user exit?
Test Case
Create Standard Order
Enter Material with Sales BOM
ITEM A     Qty 10
BOM explodes with Item categories
ITEM A     TAQ parent
ITEM B     TAE child
Create Delivery
Delivery has item categories TAQ and TAE
TAE is pickable, TAQ no pick
Process TAE
     Pick quantity of 5 items
     Change delivery quantity to 5 items
     Forget to change TAQ delivery quantity
     Pack 5 items
Post Goods Issue the delivery.
Is there are requirement/routine than can be run at time of PGI that checks TAQ delivery quantity is the same as TAE delivery quantity. If quanities are not the same, show hard error and message do not allow PGI to complete.
Thank you
Tony Romain

I tried setting that field in the sale order this morning. By defaulting it to "C"; I was able to get warning message for TAE line. I was able to post goods with TAE and TAQ, being different quantities. I need the check to determine if TAE and TAQ delivery quantity are different. Using this fields seems to be line specific. Thanks for the suggestion. I now know what that field does to the delivery.
I rewarded points.
Thanks,
Tony

Problem with post goods issue

hi
I'm doing a delivery using vl01n bt at post goods issue its showing run time error.the error message details gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
plz tell me the configuration steps for post goods issue in SD if applicable.

Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera

No Acc. Doc generated after Post Good Issue - please help!

Hi All,
I have problem when I try to post good issue, the accounting doc doesn't generated.
I have created SO, (Order type - OR, item category - TAB, Schedule Line cat - CB), created PO after the purchase requisition was generated in the SO. processed good receipt and created outbound delivery, everything is fine until post good issue, there is no Acc. Doc created automatically after PGI.
I have check the following setting
material type attribute setting - ok (standard price control, val.update, qty update)
valuation level - ok (valuation area is plant)
valuation grouping code - ok (activated)
valuation areas assigned to the valuation grouping code - ok
valuation class(s) is linked to material type(s) vis acc. cat. ref. - ok
accout grouping for movement type - ok (leave it as default)
configure auto posting - ok (I have run the simulation test, and created the missing G/L acc in the company code which under testing)
The WL Acc Doc type is defined and assigned with number range.
material and accounting period are open
In Purchase order, the purchase item assigned with Acc Assignment Category E, Special Stock is E, Consumption Posting set in Acc Assignment Category is E, Acc Modification is VAY, GR non-valuated and GR non-val. binding checkboxes are deselected.
I know the Acc Assignment Cate will affect the auto acc posting in GR, but I am not sure it will affect PGI in the same way.
Could anyone tell me which value string will be using for this auto acc posting for PGI? My best guess is
MvT S val. update, qty update Mvt Cns
601 E YES YES L ?
Could anyone tell me what cause the Acc Doc not be generated after PGI?
Thanks for your time
Alvin

thanks for reply.
Regard to the point 2 suggested by Cathy, the account determination for billing is set, the accouting doc is created after billing.
my problem is no acc. doc generated after PGI.
meanwhile I have searched a similar problem in other forums, I found some similar reply as Prasanth did, so I think I may try to run VA88 to see the result.
Prasanth, could you please explain the pinciple behind of why this happen if what you say is correct.
Thanks for your time!!!
Alvin

Error message KI248 on delivery document when posting goods issue

Hi,
On the delivery document, when posting goods issue I get the following message:
"Account 60700000 requires an assignment to a CO object
Message no. KI248
Diagnosis
All given account assignment objects (order, project) are defined as statistical.
System Response
Statistical orders or projects are ignored when FI and CO are reconciled. You must enter a cost center, order, project, or cost object to which the costs are posted for CO postings.
Procedure
Enter a cost center, an order, a project, or a cost object that is not statistical. The posting row affected is 000 and the account is 60700000."
On the sales order I have a statistical order.
CO-PA is active, cost element 607 is included in PA transfer structure.
I also tried with cost center allocation in OKB9.
60700000 is defined as a cost element (category 1).
Any suggestion could be helpfull.
Thanks,
Lavinia

Hi,
Thank for your answer.
I tested with element cost category 12, it's working, but not the way I need: I don't have any value on the cost center.
When I don't have statistical order in sales order, the sistem it's working exactly how I need: the costs are posted on cost center and the VPRS condition is transfered to CO-PA on profitability segment.
Anyway, I finaly make it work with a cost center substitution.
Lavinia

Credit block in delivery document (not in posting goods issue)

Good afternoon!
When I try to deliver an sales order with exceeded credit limit, the following occurs:
I enter in tcode VL01N, input the order and press enter, then the system issues a warning "Credit user check 1 unsuccessful" because some condition in the user exit LVKMPFZ1 was not satisfied. The problem is that at this point, no document has been sent to VKM1, and neither when I save the delivery.
It is only sent when I enter in the same delivery again and save it one more time, which is a undesireable behavior. Important: the post goods issue doesn´t work at all (which is correct).
Is there any way of sending the delivery document to the VKM1 when I save delivery document in the first time?
Best Regards,
Adriano Cardoso

Good afternoon!
When I try to deliver an sales order with exceeded credit limit, the following occurs:
I enter in tcode VL01N, input the order and press enter, then the system issues a warning "Credit user check 1 unsuccessful" because some condition in the user exit LVKMPFZ1 was not satisfied. The problem is that at this point, no document has been sent to VKM1, and neither when I save the delivery.
It is only sent when I enter in the same delivery again and save it one more time, which is a undesireable behavior. Important: the post goods issue doesn´t work at all (which is correct).
Is there any way of sending the delivery document to the VKM1 when I save delivery document in the first time?
Best Regards,
Adriano Cardoso

Problem with post goods issue in SD std. delivery

hi
while doing post goods issue of a delivery in VL01n its showing run time error. the error message is gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
if there is any configuration step for post goods issue in SD thn plz mention it.
Plz help..

Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera

Profit Centre Document issue at the time of Post Goods Issue on SD.

Dear Experts,
While SD person is posting Post Goods Issue, System is generating Profit Centre Document along with other documents. We are facing an issue with Profit Centre document here and the issue is:
Some Profit Centre Documents are populating Delivery Order Number on respective field while some are not. Ideally all profit centre line items should show Delivery Order Numbers.
Please guide any solution to resolve this issue, its urgent.
Thanks in Advance.
Regards,
Zain Bashir

Hi Zain
This is a tricky issue
Are you saying that the PCA document has the Delivery Number (VL01N) updated in some cases and not updated in some cases?
The Delivery Number is updated in PCA document when you create Delivery from VL01N and do PGI from VL02N
But, if you do PGI from VL01N itself, then the delivery number is not updated in the PCA document
SAP recommends to post PGI from VL02N
Br. Ajay M

Data base tables for delivery & post goods issue

Hi,
can u plz tell me which database tables are going to update after the delivery is completed?
which database tables are going to update after post goods issue.
Thanks for ur help.
Regards
pabitra

Hi,
Check the folowing tables:
LIKP : Delivery header
LIPS : Delivery items
VTTP : Shipment item
VTTK : Shipment header
VBFA : Document flow
VBUK : Header status
VBUP : Item status
Regards,
Santhosh

Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N

Hi Experts,
     I have requirement ,where I need to change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
          I have already check BADI's below as follows:-.
1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
3) BTE-1050 - This BTE is not getting triggered while doing PGI.
        Please suggest any other possibilities to make the change.
Thanks & Regards,
Suganth.

Hi Kartik,
            I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
Thanks
Suganth.

STO - JEX invoice getting created without Post goods issue of delivery

Dear Experts,
            We have configured the "Stock Transport Purchase Order" process between 2 different plants within same company code. To satify the Indian legal process, after PGI issue we configured the process as "Proforma" invoice creation using Billing type ZJEX (Copy of JEX). And then Excise Invoice creation using J1IIN.
                  Now problem we are facing is, without "Post Goods Issue" of delivery ZNL also system is allowing to create the invoice using ZJEX type. We are using the standard NLN item category only. But our requirement is, without "Post goods issue" system should not allow to create the sales invoice.
Can anybody give your suggestion on this issue.
Thank u
Regards,
Nag

Dear Experts,
        Thanks for your feedback. As per your suggestion i modified the copying requirement in to "034". But during invoice creation i am getting the message that "The item is not relevant for billing". So not successful.
Can you please give suggestion to solve this issue
Regards,
Nag

Idoc to post goods issue against an outbound delivery

We happened to simulate both the idocs 'WPUWBW01' and 'MBGMCR02' for posting goods issue for an outbound delivery but failed.
Request you people to help us on this. Is there another idoc that we have to use to post GI... if so please let us know... and if we are using the right one, guess we are not executing it in the right way... in such a case please guide us with the steps...
Thanks
Arun
We got hold of the Idoc type 'DELVRY03 PGI SHPCON' we are able to post the Idoc but we are able to do the packing only or we are able to change the deliveries but the PGI is not happening..
please help us on this.. is there some condig that updates the delivery with the PGi or is there something else do be done in the Idoc....
will provide additional details if required.
Thanks

Hi Arun,
There are no configuration settings in this. It is development that your abaper need to carry out.
Explain to him that this is the func module. And intrun it has to either trigger a BDC or BAPI for creating packing and PGI.
He should then do the recording of that and will assign the program pertaining to BDC with in the function module.
One more suggestion is to put the same query in ABAP section too. U will definitely get a positive response.
Hope this helps.
Kind Regards
Chakradhar

Delivery document is completed,but post goods issue.

Similar Messages

Maybe you are looking for