Delivery document is not updated " update was terminated"

Hi all,
I have a problem with creating delivery order using vl01n. When i'm creating delivery it is successfully saved and system giving delivery number also but problem is when i'm opend my delivery using vlo2 sytem not displaying my delivery. And one more thing while i saving the delivery document using vl01n after saving document i'm receiving message delivery is not updated; Express document " update was terminated" received from author DDIC. What is mean that i unable to solve this problem. Please solve my problem as eraly as possible.
Thanks & regards
kesav

vi 110:delivery type FA
For the above error message, if the system could not determine the partner function Sold To Party, system will throw this error. 
So please check your partner function assignment.
thanks
G. Lakshmipathi

Similar Messages

  • Backened documents are not getting updated in Classic Scenario

    Hi,
    We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
    Is there any business functions to be activated.

    Hi Sunil,
    You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
    If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
    Best Regards,
    Anu
    Edited by: Anuradha UG on May 18, 2010 8:09 PM

  • Document Number not being updated

    Hello
    I am running into this issue at the time of posting any FI document (invoice/payment/reversal). I get an error saying ex: Doc #1900000000 already exists. which is true, that document already exists. the problem is that it is the first number in the range. I have already posted more than 50 documents and the next number should be 19000000051 or something. I checked the number range and none of them are assigned externally. I also noticed that the current status for all was "0" instead of the current number. So i manually updated the current number and was able to post that document. However, the current document number in FBN1 (Status) did not get updated so I was not able to post the next consecutive document and get the same error (saying document 190000051 already exists). Its like the system is not automatically picking the next consecutive number.
    I am not sure what the issue is because i didnt have any problems until yesterday. Could it be due to the period change (Sept 1st today)
    Any help would be highly appreciated
    thanks
    Nubha

    Hi Nubha,
    Can you please re-check in tables Number ranges for Document type, same Number range you have assigned the Number range Intervals.
    Check Table  T003  for Document type to Number range
    Check Table  TNRGT for Number range for intervals
    Thank you
    Anil

  • Delivery Header Text not getting updated using Inbound DELVRY03 IDOC

    Hello,
    I am using inbound iDOC delivery DELVRY03. I am attempting to populate a text field with segment E1TXTH8, but I can not get it to work properly. The iDOC gets posted successfully in status 53, but text does not get updated.
    Does anyone know what the values for field FUNCTION are supposed to be?
    Any other suggestions?

    Following are the values
    E1TXTH8
    Function             001
    Text Object          VBBK
    Text Name            0080000210
    Text ID              Z112
    Language             EN
    Text format
    LANGUA_ISO           EN
    Item
    E1TXTP8                     * 12343468912334445424
    E1TXTP8                     * 12343468912334445423
    E1TXTP8                     * 12343468912334445422

  • Backend document number not getting updated

    Hi ,
    Shopping cart is not getting updated with backend document number in follow on document section
    I am getting graphic display but no backned doc number
    I am on EBP 5.0
    Has anybody come acroos such issue any solution?
    Thanks in advance
    Diwakar

    HI Diwakar,
    Check in table BBP_DOCUMENT_TAB if any follown on document available wrt to SC...
    also you can do one thing...open SC in BBP_PD transaction...select line item & check for  Follow-On Document Object ID in Backend in table BBP_PDBEI...
    also meka esute that this document is created  in R/3..if follow on document is available in R/3 then it's a problem with BBP_GET_STATUS_2..
    Let me know ur findings..
    BR
    Bharat M

  • MM and FICO document can not be updated in Production System

    Hi Expert,
    starting today we cannot posting any FI and MM document
    We can SAP system and run any t-code normally but by the timeuser want to post the document. Document numbers (from running number) are created but when we need to display the document, document is not exist.
    I have checked the table, but there is no record created for new created document number.
    Example:
    We conduct posing clearing for FI doc. From FB03 no data exist and from table BKPF no data exist also,
    Thanks
    Please help.
    Rgds,

    Hi
    You should  also check if any summarization is active in your system. The path is:
    IMG>Financial Accounting>General Ledger Accounting>Business Transactions>Integration.
    Here you need to check if summariztion is active for any fileds, like amount , plant, profit center etc for Table BKPF for reference Transactions like MKPF in MM, VBRK in SD.
    Also confirm from the Basis Consultant if enought disk space is available for data base. Generally, this kind of error would happen because of the two reasons that I have already listed. Also try searching for a suitable OSS Note. Check also from a system ID with SAP ALL rights. Run SU53 in the Transaction FB03 with the Document Number for which you are getting the error to see if any authoriztion object might  be missing. You need to involve your Basis Consultant for this.
    Regards
    Sanil Bhandari

  • Document flow not getting updated

    Dear Experts,
    I am facing a  problem in document flow.
    I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
    For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
    Kindly advise.
    Regards,
    Randhir

    Hi
    Pls see the copy control sales document to sales document T.Code VTAA
    Go to the item category  and see the document flow field is activated or not if is not activated pls activate  and re run the scenario
    pls check your correct defined  Z item category the document flow is activated or not.
    Thanks.
    Vasu
    Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM

  • Order to Delivery Manual Price not been updated at delivery

    Dear Gurus,
    Here is an issue that is occuring:
    There is a manual condition type [price]been configured .The price is manually entered in the order but must be picked at delivery from the order.But the System is not picking the price at  the level of delivery altough the condition type is manually  enterd in the order.
    Is there something that I am missing?
    Regards,
    Sam Jalees

    Hi
    We copy prices from order to billing document. Pricing at delivery level is for freight. What is your business where you need to copy all conditions from order to delivery?
    Thank$

  • Copying Order No of Sales Order to Delivery Document does not take place

    Hi. Experts
    I have punched Sales order with Order number in the field of 'Order Number' on 'Accounting' Tab but when I copy the same sales order to the Delievery Document. the 'Order Number' does not appear on 'Order Number' Field on 'Accounting' tab of Delievery Document.
    Please help me out.
    Regards
    Rakhi

    Hi Rakhi,
    Actually there is no relationship between the field on sales order & the field on delivery, for both the document it is separate field.
    This field is used for mentioning the order for the chain system.
    for e.g. 'A' has given order to 'B' and 'B' has given order to 'C' in this process 'A' to 'B' is the first order & 'B' to 'C' is the second order.
    You can use UDF to pull the order no. in delivery.
    Regards,
    Datta Kharat

  • Delivery document can not be added

    Hi All,
    In "Delivery", I get the message while adding
    "No item cost was found [Delivery - Rows - Warehouse Code][line: 1] , 'F100110'  [Message 173-112]"
    Regards,
    Rupa

    Dear Rupa
    The error is because there is no item cost in the respective warehouse now u have couple of solution either as directed do inventory revaluation and ad the item cost or do goods receipt in the respective warehouse and then deliver it or u can always allow relaease item without item cost
    The choice is urs u can select the best way as per your working
    Regards,
    Manish

  • Outbound delivery document cancelation

    Hi,
    we have delivery documents for GIs at 3PL plants. After the delivery is created - IDOCs are sent to the 3PLs. After they do the GI, they send the GI-IDOCs to us. But although the GI has been made and 3PL s have sent the GI doc via IDOC - the delivery document is not getting updated. What could be the remedy?  We are unable to reverse the delivery by VL09 - as the GI has been by IDOC - system is not allowing us to reverse the delivery doc also.

    Hi,
    1. Try to find out & resolve the error in your inbound idoc from the plants after GI has been done, using the transaction WE02 & WPER where you will get the Idoc details. After correcting the errors you can re-process the Idocs so that your stock & FI postings will be correct.
    2. If this is not possible, you have to Pass a FI JV against the Material & COGS account inorder to reflect the values in your books.
    Now inorder to tally your stock you have to post a physical inv document.
    Sometimes you may find the 2nd solution as not acceptable to business.
    I hope these are the possible solutions to solve your issue.
    Thanks & Regards,

  • Mat doc not getting updated in AFRU table

    Hi All,
      While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
      The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are  entered at the time of confirmation.
    The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
    When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
    This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
    Regards
    Ankush

    Dear Ankush
    please see FAQ note 540392 question 11.
    11.        Question:
    Despite successful goods movements, the material document is not
    updated in field AFRU-WABLNR. Where do I find the document number?
    Answer:
    As of Release 3.1H, the system provides the reference from
    confirmation to material document via table AFWI. The system still
    only uses AFRU-WABLNR in the case of header confirmations or
    confirmations for an individual operation. With milestone
    confirmations or with separate goods movements, in other words goods
    movements that are posted in the update program or via requests
    (BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
    always supplied due to technical reasons.
    BR Sabine

  • Delivery document not being picked while creating shipment document

    Dear All,
    Issue is regarding creation of shipment document.
    As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
    I have created a sales order, picking is completed n saved, PGI not yet been done.
    Am unable to create a shipment document due to delivery document not being picked.
    i/p's will be of great help.
    with regards,
    Vijayashree

    Dear all,
    The issue is solved.
    As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
    Route determination setting was not correct.
    Regards,
    Vijayashree

  • Delivery Document Not Printing

    Dear All,
    I have a requiremnt where in Delivery Document is not getting printed.
    We are usng Z transaction's to access the Delivery Documents.
    Any suggestions why this issue is coming. Appreciate your early response.
    Thanks
    GS

    Hi ,
    Ok . for that particular delivery no check data what is getting in debugging mode (If there ahy conditions  check in debugging mode).
    Hope you can resolve your issue..
    Let me if any concerns....

  • Document Category not being generated Automatically for AR transaction type

    Hi,
    we have defined some transaction type in AR. But the corresponding document category is not being automatically generated
    Kindly help

    This doesn't look feasible, the only issue I ever encountered with this was the document category not being updated if the transaction type was updated. Maybe the customer has some custom triggers which are preventing the record from being inserted into FND tables. You can easily debug this by opening the form and testing in a TEST environment.

Maybe you are looking for