Delivery IDOC not getting generated

Hi All,
I have created an outbound delivery IDOC. The process is that the idoc should be trigerred as soon as the delivery is created/changed or deleted. I am having an issue. The idoc is getting trigerred as soon as the delivery is getting created but not in the case of the delivery change.
I am not able to get the probable reason for that. Please let me know the probable reasons for that and where can i check that.
Regards,
Sharadendu

Hi Sharadendu,
For this you have to use Change pointers concept.
see the explanation below
System will remeber every change for a table related to an IDOC. eg. if costcenters are changes. tables csck and cskt will change. Having a change pointer for IDOC type cosmas which reflects costcenters. Any change made by using the KS* transactions will now be recorded. Usinf the change pointers you can now generate IDOCS so that the changes are sent to the dependant systems.
use bd50 to acivate change pointers, use bd21 to generate idocs, use bd64 to determine the distribution of those idocs.
PLs. reward if useful.....
cheers,
Hema.

Similar Messages

STPPOD.DELVRY03 idoc not getting generated

Dear Experts,
I have done the following settings for STPPOD.DELVRY03 but still idoc is not getting generated when i am posting goods reciept using VL32N
1) For Confirmation control key selected A-Always POD Relevant
2) For Item category ELN POD Relevant X and POD Automatic
SAP->Customizing Implementation Guide -> LogisticsExecution ->Shipping
->Deliveries ->Proof of Delivery ->Set POD-Relevance Depending on
Delivery Item Category
3) In Vendor Master the field "POD-Relevant" is assigned the value "A".
   4) In NACE settings
          Application:E1
          condition records & output type:OPOD
          Delivery type:EL
          Function:LS
4) In pratner profile
              Partner Type-->LS
              Partner Role --> blank)
               Message Type-->STPPOD
               Basic Type ->DELVRY03
              and under message control
              Application->E1
              Message Type
              Process code-->OPOD
Please suggest me if I am missing out on someting.
Thanks
Gaurav Gupta

Hi Gaurav,
Typically for STPPOD Idocs, the NACE and WE20 Settings are maintained at Vendor Level. Try changing your settings and see if it works.
Refer this link for further details : Re: STPPOD triggered sending wrong material from SAP to SNC
Thanks,
Bharath

Inbound IDoc not getting generated in XI System

Hi all,
I have created a scenario following the given weblog:
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
The first half of this scenario is working fine and the idoc data is getting posted into the the oracle table successfully.
The business process is successfully sending the acknowledgement IDOC 'ALEAUD' to the XI server using an HTTP Receiver Channel.
The problem is that no inbound IDOC can be seen in the XI system using tcode we05.
Next the xi system has to send the same IDoc to the R/3 system. But as no IDoc is getting generated in XI, nothing gets sent to R/3.
Can anyone suggest what could be the possible error.
Pls help.
Regards,
Neetu

Hi,
You will not see that IDOC in WE05 of the XI system. You can see that only in SXMB_MONI. XI system will not store any IDOC. When it enters XI it is a XML message and it will not post any IDOC that you can see in WE05.
If you need to send the IDOC back to R/3 system, you can use BPM and send back the IDOC to R/3. If you need few details from Oracle tables that is to be sent back to R/3 then get those values from Oracle tables and fill in the same IDOC and send it back to R/3.
Try this and let me know.
Thanks,
Prakash

CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
Partha

Hi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga

When executing t.code VL03N then IDOC not getting generated

I have a issue in upgarde project as below;
Go to transaction VL03N
     -Enter Outbound Delivery number
     -Click on document flow
     -Select Goods issue material document and click on Display Document
     -Material document is displayed.
     -Then go to: System -> Services for Object
     -Click on display Relationship
     -IDOC number must be displayed.
But Idoc not generated, here only material documets are displaying, pleass let me know what is the error.
Thanks in advance,
Vishwanath

Hi,
IDOCs will not be triggered in VL03N. IDOCs will be triggered in either VL02N or VL01N based on the output type maintained (if you are triggering idoc based on Message control).
Regards
Vinod

IDOC not getting genrated

Hi Experts,
Need your help.
In idoc creation, I have changed material description, its generating master idoc but communication idoc not getting generated.
Please suggest me the solution,
Regards,
Rachna

Hi,
Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
Check the settings, it has to come. Reply back for more clarifications.
regards
srikanth.

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Proforma invoice is not getting generated

Proforma invoice not getting generated against replenishment delivery though configured relevance for proforma invoice & Pricing standard in the item category.
Copy control are maintained absolutely for Delivery document to Billing document.
The system generating message the item is not relevant for billing.
Can any one attend this on priority.

Hi Rao,
Check the item category configuration via VOV7 for the item category being used in the delivery. The billing relevance should be set to A.
It should help you
Regards,
Pls Reward points if it helps

FI Doc not getting generated at the time of Asset GRN

Hi,
We have created Asset Purchase Order.
At the time of GRN, FI Doc is not getting generated.
What changes need to be required from MM side (in OBYC)
Regards,

HI PK,
whether your PO Item have Single Account Assignment or it is Multiple Account assignment.
Check Distribution in Accoun Assignment Tab at PO item level.
If it is Single account Assignment, then Accounting Document will be generated at GR where if it is Distributed then, no Accounting Document will be generated.
In your case, Probably it would be distributed. and as a result of this your PO Item is marked as 'GR non valuated'.
Check its Delivery Tab. If it is the case, then need not worry as it is std practise. system will treated it as multiple account assignment and its valuation will only be carried out Invoice Verification level.
Later on check the Material document also.
Pls Note:
If flag 'GR non-valuated' is set in the purchase order, the valuation is only executed through the invoice verification. This flag must be set if the purchase order has multiple account assignment.
A valuated goods receipt for a purchase order with account assignment generates a posting line for the consumption account 'Account-assigned purchase order' (KBS) and for the GR/IR clearing account WRX.
hope it address your issue.
Regards,
S Anand

Accounting documents not getting generated for mvt. type 221 Q

Hi friends,
When goods are issued for consumption for project accounting documents are not getting generated.
I have tried with mvt. type 412 Q, 211 Q,
by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
Can any one throw more light on this?
Thanks and regards
SAP MM

Hi,
Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
or
Have you mantained Chart of accounts.
have you mantained Valuation area settings
Transaction event key
Valuation class settings.
Check your material master data in accounting view have mantained Valuation class.
Check your back ground settings OMWN.

SAP F&R - Order Proposals not getting generated

Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
Prashant

Hi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM

BATMAS IDocs not gettting generated using Change Pointers

Hi,
I have scenario where I am supposed to replicate Batch between R/3 & Ware House Systems. So, for this I am using the standard BAPI to generate IDocs correctly for the batch.
Now, when I go and change the document flow i.e. make changes to the Batch using transaction MSC2N and saving a new document is getting generated.
Change Pointers are active globally and also on the message type. Now when I use the transaction BD21 to generate IDocs, they are getting created successfully for the distribution model that is existing. Now, when I add a filter in my distribution model based on Plant IDocs are not getting generated.
Can any one let me know if I missed out any configuration step or else what needs to be done in order to solve this issue.
Raghuram.

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

IDOC not getting triggered

Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the PO
However the idoc is getting generated when i change only certain fields.
When i change other fields it does not get triggered.
Why?
-Dexter

Hi Dexter,
I hope these links might be useful to you.. refer all the links, you will get it..
Idocs trigering
Idocs Triggering!
regarding Idoc triggering
Idoc triggering
Regards,
Ahamed.

F9N1 - Inbound FINSTA not getting generated

Hi,
When I execute F9N1, internal FINSTA are not getting generated..
The application log shows current Accounts being edited by end of day processing run
What could be wrong and what can be done? Any idea..
The next date in F9K3- Current Account is 11.02.2010
The F9N1 run date is 12.03.2010
The F9B1 date - Current date is 12.03.2010
New posting date - 15.03.2010
I am in Development server and trying to add a new company code to the IHC set up. Where can I look into? The internal FINSTA are not getting generated..
Regards,
SAPFICO
Edited by: SAPFICO on Mar 12, 2010 11:25 AM

Ravi,
I found the problem.
Let me explain the whole process for the benefit of other consultants like me.
Pre-requisites for generating FINSTA IDOC for any account in IHC:
1. In the account (F9K2 - change account) go to 'Account Statements' TAB and ensure that the 'Next date' is the date on which you are trying to create the bank statement.
2. In WE20 you should have created a partner profile for the Business Partner (Partner type GP) who is the Account holder.
3. In this partner profile for the BP there should be a Outbound parameter for FINSTA (without Message code IHC and Message function FI) with basic type FINSTA01. The port used for this Outbound Parameter should be LOCAL.
4. For the same BP there should be a Inbound parameter for FINSTA with port and this port should be your client where the subsidiary's company code resides.
Now when you run F9N1, it will create two FINSTA IDOC's, one with LOCAL as port and for this the Partner will be your BP who holds the account in the IHC.
Another FINSTA IDOC will have the House Bank as partner. This IDOC will be succesful only if you have created the account as a House Bank and Account ID in FI12 configuration for the subsidiary company code.
Hope I have made myself clear.
Kalyan

Spool not getting generated in OO ALV report

Hi,
I developed a report in which we are giving output in same selection screen through OO ALV.
But,when we are scheduling that report in background,spool is not getting generated.
Waiting for your reply.
BR,
Praveen

Hi Aparna,
I tried NEW-PAGE PRINT ON.
I am pasting source code extract below:
   IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
    FREE MEMORY ID SY-CPROG.
    CHECK ME->IT_FINAL2 IS NOT INITIAL.
    CHECK LO_DOCK IS INITIAL.
    CREATE OBJECT LO_DOCK
      EXPORTING
        REPID = SY-REPID
        DYNNR = SY-DYNNR
        RATIO = 70
        SIDE = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
        NAME = 'DOCK_CONT'.
    IF SY-SUBRC NE 0.
      MESSAGE 'Error in Docking Control' TYPE 'S'.
    ENDIF.
    IF LO_ALV IS INITIAL.
      TRY.
          LO_CONT ?= LO_DOCK.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            EXPORTING
              LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
              R_CONTAINER    = LO_CONT
              CONTAINER_NAME = 'DOCK_CONT'
            IMPORTING
              R_SALV_TABLE   = LO_ALV
            CHANGING
              T_TABLE        = ME->IT_FINAL2.
        CATCH CX_SALV_MSG.
      ENDTRY.
CLEAR LR_COLUMN.
      TRY.
          LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
          LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
          LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
NEW-PAGE PRINT ON.
        LO_ALV->DISPLAY( ).
        NEW-PAGE PRINT OFF.
I am not getting spool list while executing it in background.
BR,
Praveen

Delivery IDOC not getting generated

Similar Messages

Maybe you are looking for