Delivery Notification & Failed Message Routing At the same time

Hi All,
Here's our scenario.
BizTalk Orchestration --> One Way Send Port --> SAP
Now, we've enabled 'Delivery Notification' on the Logical Send Port, so if the message fails due to some connectivity issue, it's caught in Orchestration and persisted in another custom database from where it'll be automatically retried. Problem is although
the Orchestration instance is terminated after catching the exception, Send Port instance remains suspended, we don't want that, to solve this we 'Enabled Failed Message routing' on the Send Port and had another Send Port to subscribe to those failed messages
and terminate them.
But after that, failures are not really handled as expected, sometimes the message is not routed back to orchestration (delivery failure notification), sometimes the Failed Message routing port is not getting the message, it's intermittent and unexpected.
Would you guys be able to help us here with.
1. Do you see us doing something wrong?
2. Any other solution to this problem rather than using 'Failed Message routing', may be programmatically terminating the Send Port instance? any examples of that?
Thanks alot
Syed

Hi Sayed,
In my view the issue is with your design of using Delivery Notification and Failed message routing together.
Case 1 : The thing is that when you enable failed message routing on the send port it will not suspend the message and the message will be delivered successfully and since message will be delivered successfully your Delivery Notification exception will not
get invoked.
Case 2 : Since the delivery notification works on the ACK NACK concept, sometimes it could happen that before failed message routing send port subscribes the message the NACK message may have been send to the Orchestration hence the message is routed back
to the Orchestration.
Hence you are getting the unexpected behavior. You could always create powershell or MSbuild scripts to remove the send port suspensions. Below links gives you the code to remove suspended and terminated instances :
http://code.msdn.microsoft.com/windowsdesktop/Script-to-delete-biztalk-1cd312ac
http://stackoverflow.com/questions/11795105/get-all-suspended-instances-for-specific-application-in-biztalk
Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question
Regards,
Rahul Madaan
biztalkvillage.blogspot.com

Similar Messages

TS3899 I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate, 2 of the same e-mail messages sent at the same time.

I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate message. 2 identical messages sent at the same time. What's up with this? Tried Apple Support by phone, and did a couple of troubleshoots, then my connection with Apple Support was cut off. Issue not resolved yet.

Did the mail get sent? Is the only issue the fact that it appears twice in the Sent folder?

Why does my iPhone give me a message chime at the same time everyday?

For the last week, my iPhone 4 gives me a message chime everyday at the same time, 10:41 PM. Yet, there are no notifications, messages, badge icons, or calendar dates. I have no idea why it keeps doing this? Has anybody else come across this issue? If anybody can help out a guy who is fairly new to the iPhone it would be much appreciated. Thanks.

Nope, I've gone through the Clock, Reminders App and through my Notifications and I can't seem to find anything that has a notification for that time. I was wondering if it was something with my Cellular Network Carrier?

Three of us ail fail to connect at the same time?

Something is really wonky with iChat. There are three of us that video chat almost daily. All of a sudden none of us can connect! I mean literally overnight! No one has made changes to their system. These are three G5 macs in three separate locations (in the same county).
Two are running Tiger, I'm running Panther 10.3.9.
It's really strange. We can text, but not video. No one can initiate the call. Everyone is getting "Failure to connect" after an invitation is issued. Two are on Earthlink, DSL, one is on through a local provider's DSL.
Everything worked fine yesterday, and the day before, and the day before that. Could it be a local phone company issues? I believe everyone in the county, regardless of ISP, is transported out of here on Sprint equipment. No other network usage (Mail or Safari, .mac or FTP seem to be affected.)
swampy

Issue resolved!
I called Sprint DSL tech support (of course their first question was, "Have you called Apple?). After explaining to the tech that I had made no system/network changes, that iChat was the most "visible" of problems with my online experience (Safari just stopping while trying to load a page and Mail just churning away to receive or send mail), and that I was a long time modem user (since 1983) and not a novice....
The tech was able to ping me from his equipment and said it was the worst latency issue he'd ever seen and that both my up/down rates were FAR beyond Spring DSL minimal standards for 3Mbps service he'd ever seen.
He sent a Sprint repairman to my house the next day to replace the DSL splitter on my line and added filters (I guess to supress any line noise) and overnighted a brand new modem which arrived an hour after the repairman left. All at no charge to me.
Installed the new modem, reset my router and badah bing! Up and running and iChatting with all my online buddies!!!!
I have no idea what caused the splitter to go bad, but apparently it happens. I was very impressed with Sprint's customer service.
swampy

Can I Use Time Capsule & My D-link Router At The Same Time?

The subject is my first question my secont question is will time capsule will be comptaibal with all my game systems suck as (wii Ps3 & xbox 360)? thanks in advance

Yes - when you do get a new Mac that supports "n" connections, you can use the Time Capsule as its wireless access point to the internet.
Keep in mind though - most cable and DSL internet connections have a data rate slower than a b/g wireless network connection. You will only make use of n speeds for data transfer between either (a) two n-speed Macs or (b) an n-speed Mac and the Time Capsule hard drive or (c) an n-speed Mac and a Mac cabled to your network. For internet access, n-speed connections will not appear any faster than b/g speed connections.

Unable to connect router to internet and computer at the same time.

I'm not sure where to start, but here goes. We recently got the internet set up at out new house. Of course, the only connection is downstairs and the computer is upstairs. The guys that set the internet up said we needed a wireless router and I said "Ok, cool."
He gave us a router and a receiver and hooked them both up. (I myself know quite a bit about computers but I figured I'd let him do his job.) So we're all set up and I start playing my game and I get a "Windows has a conflict with another computer on this IP" or something like that. I figured I might as well put some security up on this thing. So I go downstairs and hit the SecureEasySetup (SES from now on) button and come back up here and follow all of the steps and it say's that it's not connected. I run back downstairs and looc for the MAC Address and notice that it was not mentioned as one of the selectable routers.
I figured the guy didn't really install the router, just hooked the internet up into it and plugged it in, and that my reciever picked up someone else's from the neighborhood. So I go and get the CD to install and notice that I have to have the router plugged into the computer AND the internet at the same time for installation to complete. Uhh, that could be a problem. Computer upstairs + router and internet cable downstairs = no go.
So here's my question: What can I do about that? I can't have the computer and the internet hooked up to the router at the same time.
Thanks to everyone that replies.

First off... don't use the setup CD.
Configure your router by http(ing) to the IP address, log in, and configure that way. much easier. typically its http://192.168.1.1
username admin
password admin
once you get logged in change that password and Remember it! If you lose it, you'll have to reset to factory defaults.
2nd
Change your SSID. Default is "linksys" you'd be suprised how many people leave the thing as defaults and someone else is using yoru network connection...
3rd
Add security WPA is better than WEP
4th
Now go upstairs and look for your new SSID, connect with your WPA code and you should be set.
5th - Not needed but for info...
If you want to go that far... you can change your DHCP set to something like 10.0.10.x but you'll have to manually change the IP of the router to that subnet as well...

Problem when calling the RFC and IDoc adapter at the same time

Hi,
I'm having a major slowdown problem with XI3.0 SP11.
When I'm sending a message(IDoc) from R/3 into XI to get translated into an EDI document, I have no problems and it's very fast. RFC calls are very fast too.
Now, if I'm sending the same message and at the same time another call is done trough the RFC adapter, then the full XI environment hangs for several minutes.
I did all recommended settings from the XI-SR1 install guide(Configuring the J2EE Engine) and tuning guide (XI Configuration Parameters)
and I don't know what to do more? At the Unix level, command TOP shows that dw.sap.XDV_DVEBMGS70 is taking all the CPU% available when both messages(IDoc and RFC) are sent to XI at the same time.
Anybody have an idea what to do next?
Rgds,
Yves

Did you check the dev_rfc logs ? Also check SM21 for any errors. Logon to the Target System and check SM50 transaction then you will know whats going on.
regards
Shravan

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Airport Snow Network and Ethernet at the same time?

Here's the setup. I've got a new Intel MacMini (10.4.6), G4 Sawtooth (10.3.9), iBook G3 and a Dell all using wireless on the Airport Snow router. I'm in the process of moving files over from the Sawtooth to the Mini. The Sawtooth and the Mini are within 2 feet of each other.
Would I get better file transfer speed with a Ethernet crossover cable between them rather than the wireless network? Can I use the hard wire connection and the wireless connection via the router at the same time?
Thanks in advance.

Would I get better file transfer speed with a Ethernet crossover cable between them rather than the wireless network?
Yes
Can I use the hard wire connection and the wireless connection via the router at the same time?
The Mac will use one OR the other if they are both connected.

Icannot authorize my tablet. the message is always the same "fail to authorized device"

I am not able to authorize my tablet. the message is always the same"failed to authorize device" I have an Adobe Id and a password. with the same Id and passaword it was easy to authorize the computer. How can I do?

The details will depend on which app you are using on the tablet for reading DRM ebooks.
Bluefire is free and generally pretty reliable, and works on Android and ios.
Several people have reported problems trying to get the Overdrive app to authorize.

Enable Biztalk Failed Message Routing in Orchestration

In Biztalk Receive Port or Send Port, we can enable failed message routing such that error message will be routed to the message box for further processing and I can subscribe to those error reports and consume them.
Can I do the same in an orchestration? So for example, I have a correlation set, where my orchestration is going to wait for 2 messages before aggregating them and publishing a message to a send port.
So my receive shapes are in a scope shape and the scope shape has a timeout. So if the timeout elapses before the orchestration is completed then an exception will occur and the message will suspend.
What I'd like to do is have it not suspend, generate an error report which I can subscribe to and perform other logic, such as inform someone. I'd also like to include details about the message, or possibly the entire message that was received, which
appears difficult because the scope's exception block is not in scope of the message that was received.
I'd think that will correlation scenarios this would be a common problem. Any suggestions?

Hi Jeremy,
You have to use Exception Handling in Orchestration, I would ask you to go through following articles to understand how to work with exceptions in Orchestration:
A developers guide to handling exceptions in BizTalk Server
Using Transactions and Handling Exceptions
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

I have 2 accounts and all messages are in the same inbox, I want to separate both as with the previous OS

I have 2 accounts and all messages are in the same inbox, I want to separate both as with the previous OS

Hi fmethot,
What is the version of your router? Is it version 1 or 2? The Cisco 10521 is the last 5 digits of the serial number of your router. That is the default network name of your router.

A Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.

Hi Team-
we are getting below alert in Exchange 2013 on UM server
a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
eventID 1647
The Microsoft Exchange Unified Messaging Call Router service rejected the call for the following reason: 15505;source="Exchange 2013 server ";reason="Couldn't find a valid Unified Messaging server to redirect the call." Microsoft.Exchange.UM.UMCore.CallRejectedException:
An incoming call with ID for user was rejected because a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
we have exchange 2010 and Exchange 2013.
Sender of the voice mail is on the Exchange 2013 and receiver of the voice mail is on Exchange 2010
Is this not supported scenario of Exchange 2013 UM server and Exchange 2010 mailbox server
ksrugi

You cannot and should not expect Exchange 2013 UM function for mailboxes housed in Exchange 2010. And the reverse is true as well. If you want Exchange 2013 UM to function for users, their mailboxes need to be in Exchange 2013. Exchange
2013 UM should be able to redirect calls to an Exchange 2010 UM server if it detected a call was destined for a mailbox being hosted by Exchange 2010, assuming the UM servers/roles/services are within the same UM Dial Plan.

Failed Message Routing - Generic Error Description - why?

Hi,
I have developed a custom pipeline component but when it throws an exception, it throws a generic exception description, as follows:
"The Message Engine encountered an error during the processing of one of or inbound messages"
I have 'Failed Message Routing' enabled on my port and an orchestration that subscribes to these failed messages.
But I'm creating my own custom error description, with information I use further down the process, this custom description gets overwritten by Biztalk somewhere after been thrown.
Is there a reason for this? And is there a way to work around this?

Thanks for your reply.
I'm trying to get a value from the using XPathReader
Here is a snippet of my code
Stream inboundStream = bodyPart.GetOriginalDataStream();
VirtualStream virtualStream = new VirtualStream(bufferSize, thresholdSize);
ReadOnlySeekableStream readOnlySeekableStream = new ReadOnlySeekableStream(inboundStream, virtualStream, bufferSize);
XmlTextReader xmlTextReader = new XmlTextReader(readOnlySeekableStream);
XPath.XPathCollection xPathCollection = new XPathCollection();
XPathReader xPathReader = new XPathReader(xmlTextReader, xPathCollection);
xPathCollection.Add(XpathValue);
bool ok = false;
string Value = string.Empty;
while (xPathReader.ReadUntilMatch())
if (xPathReader.Match(0) && !ok)
if (xPathReader.NodeType == XmlNodeType.Element)
xpathValue = xPathReader.ReadString();
else
Value = xPathReader.GetAttribute(xPathReader.LocalName);
ok = true;
DateTime.TryParse(Value, out myDate);
readOnlySeekableStream.Position = 0;
bodyPart.Data = readOnlySeekableStream;
if an Exception happens anywhere before this code or even during this code snippet, I get my custom error description but when the code exits the 'while statement' and if an exception happens, I get the generic error description - "The Message Engine
encountered an error during the processing of one of or inbound messages"
Does something happen the stream when it is used in XpathReader?
Thank you

Failed Message Routing not working

HI
I have a receive port and a Send Port .In the Rv Port i have enabled Routing for failed Messages.
The send port is a file adapter and have a filter ErrorReport.ErrorType == FailedMessage & Receive Port Name.
When i drop a invalid Message to the Receive Location i am unable to get the Failed Message.
Where i am wrong ?

This could be because your ReceivePortName property is demoted. To avoid that the error message is routed to subscribers that actually are subscribing on you original messages its original properties are demoted. Think of it, otherwise all
port that subscribe to messages (from a specific ReceivePortName for example) could end up getting the error message and
ErrorReport.ErrorType == FailedMessage is not promoted.
Refer the article on how to achieve this:
Failed Message Routing and Failed Orchestration Routing in BizTalk 2006
Using Failed Message Routing
Rachit
Please mark as answer or vote as helpful if my reply does

Delivery Notification & Failed Message Routing At the same time

Similar Messages

Maybe you are looking for