Delivery with quantity order quantity: how to avoid this?

Hi all,
we need to implement a check that prevents creating a delivery with a quantity greater than that on the order. In customizing
( release 4.0B ) there is a flag at item category level ( field:
V_TVLP-UEBPR, check delivery in excess ) which can be useful at 50%. Indeed, if I manually create an additional item
in the delivery... then the system doesn't recognise that item
as belonging to the order... and the check in customizing fails
( the delivery is saved with a quantity that exceeds that on the order ). Is there a solution to this problem in customizing, or
do I need to work at programming level?
Thanks to all in advance.
Adriano.

Hi Adriano,
Try using the option B in the 'Check Overdelivery field' for the quantity in the Delivery Item Category (TAN etc) in customizing (transactionn OVLP). .Following are the details in the SAP help documentation for this field:
Control for checking for overdelivery
Specifies how the system reacts when, during delivery processing, you exceed the original order quantity.
Use
For each delivery item category, you can specify whether the system checks for overdelivery and, if so, whether you receive a warning or error during delivery processing. If you have specified an overdelivery limit in the sales order or in the customer-material info record, you can use this indicator to control how the system reacts.
Please let me know if this info is helpful to you in your work.
Best Regards
Sitaraman

Similar Messages

How to create Delivery with sales order FM/BAPI

Hi Gurus,I'm new to SAP platform
I have created sales order ,
with this i need to create Delivery(vl01n)
so i need to give 'Shipping Point','Selection Date','SD Number'
so could any one tel me which FM/BAPI is suitable to create
Outbound delivery with 'sales order number', 'Selection date' and
"Plant or Shipping Point'.
With these Import parameters i need FM/BAPI .
Thanks in Advance
Siva Kumar kasa.

I have created delivery with that BAPI
giving 'batch number' but it was not updated,so can u tel me
any related field which need give to change batch field also.

Create delivery with sales order reference.

Dear all,
       I created a sales order with sales area (1000,10,00) and order type(or).
       when i am creating a delivery with sales order reference , error is occurring.
error:(Order cannot be delivered (see long text)).
       plz solve the problem urgent.
                                      Regards,
                            v.mallikharjuna rao.

Hi,
You must do the PGI before creating the delivery. Please follow the below mentioned procedure carefully and you will be able to do that.
Once you create a Sales order, go to the transaction VL01 and do the PGI. To do PGI (from transaction VL01), in the menu, go to Outbound Delivery->Save and Subseq.Func->Transfer order. This will take you to Transfer order transaction. click on Generate TO and save. Now return to transaction VL02 and click on Post Goods Issue. This will do the PGI and save the Delivery document. Now go to VF01 and you will have the delivery number just created as a line item. Select it and click on execute button. Save once the execution is done and a Billing doument (invoice) is created. Now if you go to the sales order and click on document flow all these documents will be displayed.

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

Lynne130,
to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

How i avoid this window and directly fetched date

hi master
sir i have three options button when i select anyone then my query change and fatch new data
but before fetching data system show new windows with this message
Do you want to save the changes you have made ?
with yes / no /cancel button
sir how i avoid this window and directly fetched date
or how bypass this message
please give me idea

bro, when u execute the query to fetch records it tries to validate the form and pops an alert message. if u want to avoid it do this
change : execute_query;
to: execute_query(no_validate);
now it wont ask for validation of the previous records present on the form, but make sure such actions are not not a threat to data integrity.
zaibi.

How to avoid this no read acess in EPC

hi to all experts.
im getting this error in Extended Program Check how to avoid this error .
No read access to field string SWIFT

Hi,
Field swift was not read in program, which means field swift was not used in program.If swift was necessary use it with read access.
Hope this helps you
Regards,
Rajani

Why do all the programs open when the mini is turned on, and how to avoid this?

why do all the programs open when the mini is turned on, and how to avoid this?

Open System Preferences > Users & Groups then select the Login Items tab.
Remove all apps listed there.
And check /Library/StartupItems
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/StartupItems
Click Go then move all items from the StartupItems folder to the Trash.

After adding MIME type in sharepoint server, file click opens a popup for file to open as readonly or edit, How to avoid this popup

After adding MIME type in sharepoint server,
File click opens a popup for file to open as readonly or edit, How to avoid this popup
Popup Details:
You are about to open --> File Details
How would you like to open --> ReadOnly, Edit
OS: Window 7
Jagadish

this is likely caused by the library requiring check-out/check-in. For a file to be editable, the file needs to be checked out.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please rpely.

Hi,
After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please reply.
Thanks,
Ganesh

If you disconnect the cable going to the serial device, do you still get the echo? If so you have something going on in the port setup. If disconnecting the cable stops the echo then the device you're talking to is doing it - which would be my bet. One thing to check is whether this might not be normal operation. I have seen devices that if a command was successful, it simply echo'd back the command string you had sent. Also many serial devices have setting for specifying whether they are to echo commands.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Hi. My Ipad2 is being reseted each 1 minut of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks. iPad 2

Hi. My Ipad2 is being reseted each 1 minute of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks.
iPad 2

Try resetting your device by holding down both the home and lock buttons for ~10 seconds or until the device restarts, ignoring the power slider.

How to avoid this?

Hi
i'm calling reprots from the forms.My problem is we are calling 3 reports at a time i,e one after the other, this will works fine in report 5 for screen but in 10g this will overlap all the output to a single pdf file (here i'm using cache)so that i'm getting only the third file.
how to avoid this? so that i can have 3 diffrent pdf files or one after the other if first close second open,second close third open.
please help me,
thanks and regards
vishwa

IF :BLK_MAIN.CKB_REP7 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast03');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast03',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
IF :BLK_MAIN.CKB_REP6 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast05');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast05',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
IF :BLK_MAIN.CKB_REP1 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast04');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast04',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
In the above code,3 check box are like :BLK_MAIN.CKB_REP7,:BLK_MAIN.CKB_REP6,:BLK_MAIN.CKB_REP1 which end user selects(he can choose any one or all three).If select all 3 the report masto4 only comes,mast05,mast03 also
comes but those pdf's are overlaped from the report mast05.
But in the earlier version of forms and reports, if close the first report then second will come and like that.

Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?

Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?

AleksandrD wrote:
Bought the iPad . Asks for activation,
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

Why Memory Manager .cpp Error.How to avoid this

I am getting getting the attached error when developing labview program.
Why this error is coming?
How to avoid this?
Attached the error screen shot
Attachments:
MemoryCppError.png ‏33 KB

Hi Selvan,
we don't know your VI, thus we don't know the cause…
Practical advice: save often, save early!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I have just purchased Premier Pro - I have been waiting to down load it but it says it is still processing my order? how long does this take?

I have just purchased Premier Pro - I have been waiting to down load it but it says it is still processing my order? how long does this take?

Hi There,
We have checked the details for your account, your subscription is activated.
Kindly download the product using the below mentioned link.
Creative Cloud Help | Install, update, or uninstall apps
2. If you face any trouble kindly check.
Troubleshoot Creative Cloud download and install issues
Error downloading and installing Creative Cloud application
Thanks,
Atul Saini

Pluggin container makes flash player crash. all is up to date. How to avoid this?

Question
pluggin container makes flash player crash. all is up to date. How to avoid this?

First, download and run the Flash uninstaller: [http://kb2.adobe.com/cps/141/tn_14157.html http://kb2.adobe.com/cps/141/tn_14157.html] . You probably want the 64-bit version. After that has run, restart your computer, and then let's download a fresh version of Flash. Try downloading and installing it from [http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe here].
Once you have flash installed again, start Firefox up, and see if you are getting any errors. If it works, awesome, if not, let's move on.
Start Firefox up in [[Safe Mode|Safe Mode ]] (don't select any of the checkboxes that appear). If Flash works here, then it is one of your addons which is causing a problem.
If we are still having a problem, try [[Updating your graphics driver|Updating your graphics driver]] .
If none of these work, read [[Troubleshooting plugins|Troubleshooting plugins]] and let me know!

Delivery with quantity order quantity: how to avoid this?

Similar Messages

Maybe you are looking for