Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?
Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?
AleksandrD wrote:
Bought the iPad . Asks for activation,
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.
Similar Messages
-
I install the iOS 7 and the ipad asks for a code, I never put it a code
I install the new ios7, the installation when witohout a problem, but in the gettin started part, the ipad asks for a code, I never put one, so I cannot use the ipad because of that.
I can not restore it, because it aks me to go to adjust and shut down the find my ipad part, I can not get past the code.Here it is how I solve the issue. I downloaded the iOS 6.1.3 of my device and installed via ITunes. Then a message of error appear and the ipad when directly to restore mode. Then I Just restore it and That Was it.
So I can tell That the Main issue is That iOS 7 does not have the restore mode option.
You know the one where you press the home button, then the sleep button and release the home button. -
I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday. The security lock have never been enabled. After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD! ?????? APPLE, what programming subroutine is forgotten during functional testing prior to release of the latest iOS upgrade???? - Now from a borrowed hotel guest computer I post my ”HELP NEEDED”. Please advice if there is a way to skip a security kode I never enabled (nor even tried out and diabled) – WITHOUT spending time to find a Apple store helpdesk that restore via iTunes, and delete all my local data.
Reg
SpannishFLYDuring the setup of iOS 7 which you went through after installation it asked if you wished to create a passcode. It is possible to skip setting up a passcode at this step but you must have created one.
If you can't remember the passcode and you have enabled "find my iPad" you can use http://www.icloud.com/ to remote erase your iPad, then you can set it up again, and restore it from an iCloud backup. -
Hi,
Please help me with this as the phone is currently lying as a dead paperwieght with my brother in law. The phone, even though bought as SIM FREE, keeps asking for ACTIVATION!!!
Does it mean that I need to activate it with a SIM of one of the carriers that offers a contract and then I am free to use it with any SIM anywhere in the world?
Please assist in as much detail as you can.
Thanks.Hi FelipeV,
Thanks, tried that.. half their numbers keep going busy and when they do pick up they are unable to assist.
I called up APPLE in UK as well, no help there either..
but.. I say.. its a SIM FREE phone for crying out loud, what is this ACTIVATION nonsense??
Thanks for the suggestion anyways. -
Hoping for a solution since i need to have this iwork to 'work'.. Too many assignments need to be done and i am sick of going to the library to use the desktop there. Thank you =)
I think you have two separate issues & I'll try to answer in the order you need to address them.
First, it seems you have/had the trial of iWork '09 installed. It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Next, you need to update iWork '09 to 9.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work. -
hey guys what is the best way to retrieve my password on a mac?? I need to install a new software but it would not let me because i can't remember my password. what a pain ;-((
Any suggestion would be greatly appreciatedResetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274 -
My phone was stolen and my icloud is loged in and now my ipad is disabled and now asking for activation and it says there that i have to put my icloud account and i tried loging in my account but it says that it cannot open with that icloud account what do i do????
Welcome to the Apple Community Robin.
Contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan. -
I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?
The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them. -
My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.
My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.
-
Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
-
my iPad asks for my iCloud password but I can not. that I can do? the problem is that I try to access it by putting my email but I do not remember which was which I put.
If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Trial version PSE12 continually asks for serial number but does not complete the action when serial number is entered. Is there a work around?
Is the serial number being accepted as valid, and it seems to be working, but then later you get a popup asking for activation, again, or is the serial number not being accepted as valid, initially?
In other words is there a problem with the serial number or is there a problem with the licensing mechanism on the computer? -
Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?
I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router. -
I have successfully restored my iPhone 3 gs( Ios ) by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
Thank you
Regards
Wazir AliWell, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.
-
hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]
First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818
Maybe you are looking for
-
File Adapter: Dynamic file name
Hello, I would like to use a filename like this: Name.<DOCNUM>.Direction.<Timestamp> For DOCNUM I use variable substitution. Works fine. For <Timestamp> I need a different format as the timestamp function in file adapter create. So I try to set up my
-
Is it possible to get the iPhone 3Gs from Malaysia
Hei, Im a foreigner living in Malaysia, doing my degree. And i've been trying to buy an iPhone 3Gs from Maxis for such a long time but have failed, They are saying that it is sold only for postpaid customers and only locals can become one. The apple
-
hi i'm on the last of 10 lessons on lightroom 3. i imported the four photo's for the lesson, but they all have the "missing photo" icon instead of the "metadata file needs updating" icon. i managed to convert one photo to the "sidecar has conflict" i
-
I can not sign in to get my e-mails
When I sign on with fire fox and I get the mome page and i go to sin in
-
How do I unlink objects that I want to delete?
Hi, If I want to delete video that I used in a project and it is linked to other stuff in the project--How do I delete the video without deleting the other things that it is linked to? Or how do I unlink them? A warning comes up that reads; +One or m