Delta with two different selection criteria

I have crated two Delta DTPs with different selection criteria (one with Flag = Y and Flag = N).
With flag = Y selection I have 100 records and flag = N, I have 50 records.
When I ran first Delta DTP (flag = Y), I got 100 records. Delta DTP worked fine.
But when I ran 2nd DTP (with flag = Y), 50 records tranferred but no records added.
Is it possible to have two delta DTPs with different selection criteria?
Thanks,
PV
Edited by: P V on Aug 23, 2009 4:58 AM

Hi.
I guess there was a typo error in your query,
"When I ran first Delta DTP (flag = Y), I got 100 records. Delta DTP worked fine.
But when I ran 2nd DTP (with flag = Y), 50 records tranferred but no records added."
I guess it should be,
"When I ran first Delta DTP (flag = Y), I got 100 records. Delta DTP worked fine.
But when I ran 2nd DTP (with flag = N), 50 records tranferred but no records added."
Yes, two Delta DTPs with different selection conditions can be used.
Can you please check with the availability of 50 records with FLAG = N in the target InfoProvider?
If the 50 records with FLAG = N loaded through delta already exists in the target InfoProvider,
then no addition will occur though trasfer will take place.
Regards.
VJ

Similar Messages

Displaying same field with two different selection criteria.

Post Author: spulkundwar
CA Forum: Crystal Reports
Hi All, i want to display list of product in two different table having life counter field less than 0 and life counter field greater than 0. The product list is grouped by product category. The report should look like as shown belowProduct Category1                                             Soon expired (Life 0-25)                                                        Expired Products (Life < 0 )                            Product Name Product Life                                                        Product Name    Product Life                                     Coke                            24                                                                        Pepsi                    -2                                    Beer                           12                                                                          Vodka            -34 Product Category2                                  Soon
expired (Life 0-25)                                          Expired
Products (Life < 0 )
                            Product Name Product Life
                                 Product Name   Product Life
                             Pepsi                    14
                                       Coke              -2
                         Beer                     2
                                      Vodka            -34
Is this possible to show two tables in each report row? When i set selection formula to product name, it sets the same selection formula to all the fields in the report.

Post Author: pvierheilig
CA Forum: Crystal Reports
Hello -
Can't you set the group to be on the category? Selecting the product name in the record selection formula will present only those product (as opposed to categories).
A subreport, as suggested, will work as well, but your stated record selection will continue to produce the same results - check that, too. Additionally, you could group on the category and add a group 'b' section (Section Expert; see the Help file).

Can my iphone operate with two different phone numbers?

can I insert an additional sim card in my iphone so that it operates like a phone with two different selectable lines?
in other words I carry one phone with me but can receive or send phone calls, texts, emails etc from either of two different phone numbers?

No

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

I am using Windows 8 with iTunes. How do I manage iTunes with two different Windows User Accounts?

I have recently bought a laptop running Windows 8 and downloaded iTunes. I subscribe to iTunes Match and have a large amount of purchased music and imported CDs, along with some films purchased from iTunes.
I have downloaded all of the music and the films to the laptop using iTunes Match when logged in under my User Account in Windows 8. However, when we switch to my girlfriend's User Account, she can load up iTunes but all the music and films have the cloud symbol on them indicating that they need to be downloaded
Is is necessary to download everything to the computer twice (I can't really believe this is the answer) or are we missing something in terms of using iTunes with two different User Accounts?
Thank you.

Step 1
Create a new user account on your device. For Mac users, choose “System Preferences” from the Apple Menu and navigate to the “View” menu. Click on “Accounts” and select the “+” button to add a new user account to your machine. Edit the user information and grant any relevant privileges by following the on-screen prompts.
For Windows users, click on the Windows "Start" button, select “Control Panel” and choose “Add or Remove User Accounts.” A new window will open. Click “Create a New Account.” Name the account and set any relevant privileges by following the on-screen prompts.
Step 2
Sign in to the new user account you created.
Step 3
Open iTunes and click “Sign in.” Enter your Apple ID and password and log in.
Step 4
Download purchases through the iTunes store. All files related to these purchases are stored under the separate user account, thus separating both iTunes accounts and their libraries on the same computer.
Step 5
You can share music from both libraries by dragging your music library to a publicly accessible location on your computer. Click “Preferences” from the iTunes menu and deselect “Copy files to iTunes Media Library when adding to library file.” Add the shared folder to your library from the “File” menu.
Tip
Create more than one library from the same user account by deselecting “Copy files to iTunes Media Library when adding to library file” from the “Preferences” menu. Add the files you want to iTunes by dragging and dropping or by opening from the “File” menu and sync your device to that library. Quit iTunes after the sync and reopen iTunes while holding the "Shift" key in Windows or the "Option" key on a Mac.
(tour du lịch nước ngoài)

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

Sales Deal with two different validation dates for the same material

Hi SAPers,
I am trying to create a u201CSales Dealu201D VB31, for the same material/condition, but with two different validation dates. After the creation of the first record, I select u201CNew conditionu201D button, but the system give me the message VK104, u201Cthe condition is being processed in the current session.u201D.
How can I solve this issue?
Thanks in advance.
Pedro

We can't have multiple records for the same condition and key values valid on the same date. The condition end date is part of the primary key in the database table. The date ranges between the records cannot overlap. When you create a new record, usually the end date is set to 12/31/9999 by default. If you need to have this deal to end on a different date and a new deal to start afterwards, then first you need to change 12/31/9999 to a different date.
Also usually I try to exit the screen between the transactions.

Dealing with two different sets of users but same OAM/SSO/OID Server?

In our application server's (OAS 10.1.2.) ssl.conf, we need to have the following as following since it's part of the requirement,
to ask for the user's Cert (CAC, SMARTCARD, X509). We have OAM 10.1.4.2.
SSLVerifyClient require
However, using the same exact OAS 10.1.2.3 server, for only a specific URL containing
/web_html/ as a part of the URL, we need to bypass the SSLVerifyClient require and only
a server based SSL handshake is required when the SSO resource*(/sso/auth, or /pls/orasso/..)* is hitting
the OID server that is configured with the SSLVerifyClient.
SAME OID Server has to deal with two different organizations:
org1 ---> SSO ---> Client based X509 Cert Based Auth
org2 ---> SSO ---> Server Based SSL Handshake only
The SSLClientVerify does have the optional option to use and the users
can just click on CANCEL but the customer thinks is not very user friendly.
The screen that is displayed as a result of the SSLVerifyClient (Choose a Digital Certificate) seems to be
operating system dependent.
I hope, we won't need to have anther server just for this other organization.
Thx for your time in advance.
KA
Thanks in advance,
KA

Daniel,
We have OAM and it's performing the authentication.
The SSLVerifyClient is bring up the Choose a Digitial Cert screen and by selecting Cancel, everything works for userlogin/password users. The problem is the screen user friendliness.*
We are just trying to customize this screen so there is additional message or a different screen would be displayed instead of the generic screen from MicroSoft with OK OR CANCEL.
Thx for your time,
KA

Customs duty commming two time with two different price

Dear All,
I facing the issue while creating the PO the condition Customs duty Conditions (Z005 )commming two time with two different price
Can you please tell me where can check
Regards
Murugan
Edited by: murugan jayaraman on Jan 9, 2011 3:19 PM

In the PO go to the conditions tab, select the condition type and click on analysis, then check where the conedition type is coming from.
Repeat this for both the Z005 conditions.
In M/06 t.code see if there is also a access sequence and condition contrl says Manual entry has priority. If this is the case sometimes system allows same condition twice.
One time it comes from Mek1 and the other one is manually entered.

I have two Ipods andwant t oset up two Itune accounts with two different libraries

I have two Ipods and want to set up two Itune accounts with two different libraries. Can this be done?

You can, but switching iTunes libraries and store accounts is generally more hassle than it is worth. You can sync each device with selected purchases and if you have more than one iOS device disable the option to Automatically include new apps, then apps purchased on one device won't automatically load onto the other.
tt2

How to enter invoice with two different tax codes in one line?

Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.

I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you?

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

this sub forum is about running windows on macs maybe you should try
https://discussions.apple.com/community/notebooks/macbook

One MIRO document with two different vendors for two different line items

Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
MIRO document needs:
GR/IR Clearing    Dr.
Freight Clearing Dr.
Vendor RM(X)         Cr.
Vendor Freight(Y)   Cr.
Is it possible to post the above document at a time not individually for each condition.

Hi,
Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
Itm PK BusA Acct no.   Description                    Tx     Amount in   USD
001 89       130001     Stock-Ingredients               244 0            880.00
002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
003 86       520002     Ingredients - PPV               244 0          3,297.87
004 50       320008     GR/IR Account - Duty            244 0            797.87-
005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
Thanks
Dinabandhu

One Material with two Different In-House Production Days

Dear Experts,
We have 1 semi-finished material (HALB) that is common to two different locations (production version) with two different in-house Production days. How can we separate the 2 different in- house prod. days for this specific material? Could we setup in the production version? if not, could you give us an advice.
Ex:
JDXZ011111 with Prod. version I000 = 3 days
JDXZ011111 with Prod. version X000 = 1 day
We are hoping for your help..
Thank you.
Regards,
Marnelli

Dear Mamelli,
1.You cannot maintain the in-house production time in the production version.
2.In-house production time in days can be maintained in MRP2 view.
3.If Lead time scheduling is carried out at the time of MRP run then the system uses the in-house time for the calcualtion onf basic
start and end dates.Based on the routing data the system proposes the production start and end time.
4.Generally exception messages 64 Production finish after order finish
63 Production start before order start are shown after MRP run.
5.If basic scheduling is carried out then the system proposes only the basic dates.
Regards
S Mangalraj

Delta with two different selection criteria

Similar Messages

Maybe you are looking for