Demosaicing intro'd w/ LR3.2 Sharpening with 7D. Help requested.

All,
I hate pixel peeping, but none the less it appears that there is demosaicing being introduced in the new sharpening methods that I am not seeing in Canon DPP or for that matter CS3 USM, or Smart Sharpen. Images follow, and I can supply the original RAW file if required. If I am doing this comparison incorrectly, I'm open to any comments and corrections. All images are 100% center crop of a 7D image. No adjustments to exposure, clarity, etc. ISO 200 image, Canon 7D, Canon 70-200 2.8 IS
Image One: No image sharpening applied out of LR - Note the area of the two thin white sleeve stripes on player's left arm below patch - Smooth going around front toward back
Image Two: Above image but overcooked with USM - Same are still smooth
Image Three: Original RAW file processed with Canon DPP and Sharpening pushed to almost max. - Still Smooth
Image Four: RAW image processed in LR with Amt 40, Radius 0.8, Detail 25, Masking 20 - Note the demosaicing (stairsteppng) in that area. Also appears in the folds about the patch
Image Five: The above JPEG brought into CS3 with minimum Smart Sharpening applied - worsens condition (as expected)
Image Six: Image #4 brought into CS3 and minimal USM applied - worsens condition (as expected)
As I'm adding the images, I'm not sure the difference between the first three images and the last three are as stark as they are on my 24" Dell Ultrasharp, but I assure you they are there. I've tried lower amounts of sharpening out of LR, but the demosaicing is still created.
Any thoughts, different ways to approach, etc., are appreciated.
Jay S.

JayS In CT wrote:
Keith,
Got it.. so after repost, come prepared with a bullet proof vest. :-)
Jay S.
Keith_Reeder wrote:
JayS In CT wrote:
Dorin,
Could possibly be. I'm going to have to go back and figure out why I can't quite get it represented here and repost.
The usual trick is a 200% zoom - or more - crop, followed by a thorough lambasting for extreme, "what does that have to do with the Real World?" pixel-peeping!
Keith, Dorin, (and all),
Hopefully this shows what I was trying to illustrate. 200% on three images that are 100% crop of original. I did a screen grab of my 24" 1920x1200 Dell Ultrasharp. The lower right is converted JPEG from original RAW file in LR with no sharpening at all. Top right is DPP pushed all the way to the right on sharpening, upper left is LR sharpening with the setting listed above the image. Look at the area on the Jeter's left arm with the two white stripes under the patch, and the folds in the sleeve above the patch.
The point I was trying to make is that LR sharpening is introducing the stair step pattern you see. It isn't there with DPP (or very minimal) nor with the JPEG image not sharpened coming out of LR.
Jay S.

Similar Messages

Local sharpening with its own sliders

hallo,
is it possible now to make creative sharpening like nx2 and photoshop ?
we have a fantastic detail panel in lr3 and local sharpening was only gain with predefined values given by detail.
i would like to make a capture sharpening with detail panel and a local sharpening with other values of masking, detail and radius
is it now possible ?
like that, for trial images like the one showned in martin evening book (with eye and lines), we could process low frequencies and high frequencies independantly
clarity is nice but different
best regards
marc

Unfortunately no. Lr 4 Beta has the same local sharpening implementation as Lr 3. Often handy, but it does inherit the detail/radius/masking properties from the global settings. (While I can see the utility of having custom ones for local, that would require more substantial changes to how we render local corrections, plus more changes to the UI.)

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Custom report templates with the help of BI Publisher.

Hi All,
I have created custom report templates with the help of BI Publisher it is working as we excepted.
refered : https://blogs.oracle.com/kyle/tags/reports
But our requirement want to change the color of heading and include filters in output report, It is possible, if yes pls share you comments?
Best Regards
Pradeep

how silly of me!
just restarting the tomcat sorted the problem!!!

IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

Hi,
You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
Safari add-ons can cause performance issues or other situations
If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Mac OS: Web Browser Quits Unexpectedly or Stops Responding
Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
It contains fixes that might help. Then repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

How do I reset the password that allows me to download reader - I worked with chat help - we rest my password and I can get into my adobe account but when I try to download reader and work my way through the process when I get to the password it will not

How do I reset the password that allows me to download reader.. I worked with chat help two hours last night - we have reset a password that lets me into my adobe account but in the download reader process that password will not work - where it says Adobe reader wants to change something and please type in password, just vibrates with the dots glowing purple but will not open…. what do I do to reset that password or get it to function. they would not assist me further they said its a free download and I would need to seek help from forums ( all this is new to me )
so "forums" help…what do I do ?
thank you
PL

patricia here again:
I am the system administrator - personal computer
I have been able with your lead to find the password I need , and to have install happen
however - when I then go to the website to download the Pdf document I need I get a screen with the big red adobe icon that says to complete and down load this document I must launch adobe reader a dn sign the terms of agreement , close browser and reopen.
but thatscren has no choice buttons whatsoever, I cannot find anywhere a adobe reader image to launch - been into launch pad , preferences etc.
so now the loop is the pdf document and the adobe screen saying I must do terms of agreement
like is this Kafka like or what ...
suggestions?
thanks
P.

Replication of Berkeley DB Xml Edition with the help of JAVA API

hi,
i am trying to replicate berkeley DB to 2 other replicas.with the help of small program which along with its documentation(of chapter 3). And i'm using java API for the same(specifically replication framework program.)
All necessary files are get created at host side like log files, dll files, db files. But at replica(client) side nothing get created. Host and clients are placed in the same network.
But unfortunately its not working. don't know the reason. And its not giving any sort of error. And i dont know how to go ahead. Or is there any other way should i proceed with.
So could you help me out to get rid of this problem.
Thanks

What compiler are you running?
See this message and thread:
Re: Problem after update to 2.3.8
It may be necessary to apply the -fno-strict-aliasing flag to the Berkeley DB Java library as well.
Regards,
George

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

This helped, I restored them, but when I go to iTunes they are not there. Is there another step?

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

Java Script Error while deploying a Model with Value Help

Hi,
I am using EP 7.0 SP 10.
I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
The model compiles successfully, but gives a Java Script Error while deploying the model,
! Error on Page
When Click on this java script error, it shows that ,
Line:14985
Char 1: Error
object does n't support this property or method.
code
URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
The Same model works in dev server, and it fails in the production server.
Thanks and Regards,
Sekar

Hi jakob,
Thankyou for your quick response.
I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
And i think am not paring any formulas here.
Please guide me.
thanks and regrads
Pradeep.B

Large XML Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
grep MaxRequestSize cupsd.conf
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
MaxRequestSize 10M
I am trying to get a more reasonable size limit.

Large BI Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?

Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace

Demosaicing intro'd w/ LR3.2 Sharpening with 7D. Help requested.

Similar Messages

Maybe you are looking for