DENON AUDIO RECEIVER, Crackling in the all speakers with any device being used

I have extended warranty....
If I turned it in would I just get a replacement model because I don't want a refund ..
Also is this common? Is there a quick explanation? If not anyone want to take a stab at what's wrong?
PROBLEM= CRACKLING in all the speakers, happens with every device (blueray, DVD, TV, IPOD, Computer)
it starts to crackle simply when you turn on one of said devices otherwise its quiet..
Note. Not just devices (the radio tuner also, so its not a" HDMI cord gone bad")
It seems like anything that that makes the receiver use it's amp any power at all the crackling begins

Sounds like we have the exact same issue.. its not the devices or the speakers it's in the receiver.. luckily i have a Denon repair shop in my town .. so i can work closely with the techs and maybe finally figure this out.. i pray it's not something that gets fixed then poof! after a week just comes back.. I mean Denon will have to supply us as consumers with a working none defective product.. there selling lemons, If this is a major known problem with them.. this is disturbing.. there not cheep machines.. I mean this cost me some serious money and all 7 new speakers, blueray, and plasma to go with it.. so i have so much invested in this that i am pretty worried.. i'm not angry yet, but if i have to experience what you are experiencing my temper gauge is going to shoot straight up like a rocket..
Please if there is an admin that is a Rep. for Denon, please tell me what you will do if the problem cannot be fixed? it doesn't seem lawful to continue selling defective products at premium price.
I will update this post when the repair shop gets on the issue.. i know the owner very well and most the techs.. So i may be able to post helpful new analysis so all of us can end the problem for good... they open on Monday so I'm looking forward to what they have to say.. Thank you for your response, although it was encouraging, knowing someone has the same issue, helps takes away the worry that i have done something stupid to create the issue..
last thought.. when you say they know of the issue.. did he expand on what they think it is and there plan to fix it? what happens when my factory warranty runs out???

Similar Messages

HT5887 I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

I have tried all sorts of Settings but just doesnt seem to work one way. I keep getting messages "Airdrop cancelled".

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver? Or do I have to click each one and write down the image name by hand?
Thanks!
LJ

Alternatively use a browser:
Use the Firefox Web Developer Toolbar
https://addons.mozilla.org/en-US/firefox/addon/60
Images > View Image Information
or the List All Images Add On for Firefox
https://addons.mozilla.org/en-US/firefox/addon/3688
or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?

My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?
I have looked at other forums and the fixes suggested do NOT work.
What would cause this?
How is it corrected?

Hello DChrystal
Try paying attention to the Keyboard Viewer to see if any keys are being pressed that could be causing the sound to be muted. If it is, try it in another user to see if it is software that is causing the issue or if it is the actual keyboard that is having the issue.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Regards,
-Norm G.

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

How to make the stage transparent for SWF file being used in Dreamweaver

I have a SWF file in my Dreamweaver site, that plays correctly. The problem is that the stage is white and we would like it to be transparent. Searching the archives the following advice was given:
in your html embedding code you need to set the wmode parameter to be "transparent"
I'm wondering if this is the code in Dreamweaver or is this done in Flash. I'm working with CS5. Below is the code that matches the SWF file in Dreamweaver. I did change the wmode value from "opaque" to "transparent" and it didn't work.
Thanks for any assistance.
Sherri
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="650" height="400" id="FlashID" title="Convergence Gathering Title">
             <param name="movie" value="Flash/gold_dust_title.swf" />
             <param name="quality" value="high" />
             <param name="wmode" value="opaque" />
             <param name="swfversion" value="6.0.65.0" />
             
             <param name="expressinstall" value="Scripts/expressInstall.swf" />
             
             
             <object type="application/x-shockwave-flash" data="Flash/gold_dust_title.swf" width="650" height="400">
               
               <param name="quality" value="high" />
               <param name="wmode" value="opaque" />
               <param name="swfversion" value="6.0.65.0" />
               <param name="expressinstall" value="Scripts/expressInstall.swf" />
               
               <div>
                 <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                 <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
               </div>
               
             </object>
             
           </object>

Yes, change this to "transparent" in ALL the places where wmode is shown
<param name="wmode" value="opaque" />
Second, be sure that there is in fact nothing covering the entire stage, like a big white rectangle.
Also, what is directly behind the .swf once it's on the Web page? If the background color of that page or the <div> that the .swf is in is white..... well then then .swf can have a transparent background but then the white from the Web page just shows thru.... so there's still a white background.
Be sure there is a non-white background on the Web page...
Window Mode (wmode) - What's It For?
There are three window modes.
Window
Opaque
Transparent
By default, the Flash Player gets its own hWnd in Windows. This means that the Flash movie actually exists in a display instance within Windows that lives above the core browser display window. So though it appears to be in the browser window, technically, it isn't. It is most efficient for Flash to draw this way and this is the fastest, most efficient rendering mode. However, it is drawing independently of the browser's HTML rendering surface. This is why this default mode (which is equivalent to wmode="window") doesn't allow proper compositing with DHTML layers. This is why your JavaScripted drop-down menus will drop behind your Flash movie.
In windowless modes (like opaque), Flash Player doesn't have a hWnd. This means that the browser tells the Flash Player when and where to draw onto the browser's own rendering surface. The Flash movie is no longer being rendered on a higher level if you will. It's right there in the page with the rest of the page elements. The Flash buffer is simply drawn into whatever rectangle the browser says, with any Flash stage space not occupied by objects receiving the movie's background color.
Best wishes,
Adninjastrator

How to set a background image to fill the entire screen on any device in a spark mobile application

Hi,
I started developing a mobile application with Flex.
I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me.
I'm using a TabbedViewNavigatorApplication and i need to set some background images on views.
I need my image to fill the entire screen on any device. i don't need to mantain image aspect ratio, just need it to be fullscreen. This seemed to work when setting a custom skin on the TabbedViewNavigatorApplication, however this blocked all my views for some reason and all components contained in view became invisible.
Can you please tell me how can i achieve this?
Kind regards,
Dan

Basically you need a larger image which can accommodate any device. The trick is to show only what each device can display, so therefore some clipping will occur based on device. Have something centered and towards margins have a gradient or just plane colors that way the stuff in the middle will be visible on every device while nobody will care if you are clipping from the color fill.
C

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

How to display name of the employees start with any letter?

Hi Developer,
Please guide me in solving the issues, that i need to display names of the employee starting with any letter.
example:
if i provide name of the employee starting letter 'A' it should display only those name in the database table with starting letter.
parameters: a*
it should display name with starting letter a.
example:
abdi
akbar
akash
akilesh
thanks,
ravi.

Hi Ravinder,
You can use Ranges for this purpose:
RANGES: r_name FOR type_name.
r_name-sign = 'I'.
r_name-option = 'CP'.
r_name-low = 'a*'.
INSERT r_name.
SELECT name FROM table_name INTO TABLE it_name WHERE name IN r_name.
Regards.

I am not being able to connect to another Apple device using the Face time what settings do i need to check.The device being used is an iPad mini

I am not being able to connect to another Apple device using the Face time.The device being used is an iPad mini.
The internet connectivity is perfect the wifi is even working.

'''plafstudiesdotc'''
You are welcome.
'''''So that other users can find answers that have worked, please take a couple of minutes to return to the forum, sign in and click "Solved" next to my answer. Thanks. '''''

I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work in the same time with each devices with my ID ?

I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work in the same time with each devices with my ID ?

No you have your own ID number

I cannot launch the app store from any device

i cannot launch the app store from any device.

Well, mind showing us a screenshot of what happens?
Does iTS at least work?

Firefox does not know how to open this address because the protocol (Sims3) with any program connects

Firefox does not know how to open this address because the protocol (Sims3) with any program connects
can you help me plz

Was the message sent from Microsoft Outlook? When you embed an image in a message in Outlook (at least up to version 2003), it creates a hidden attachment for the image and then inserts a "cid" reference to it. If the attachment gets stripped for any reason then the "cid" reference is useless: Outlook does not store the original URL or path to the image.
Edit: By the way, which webmail site has this problem?

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

I leave both 3G and Wireless permanently enabled. I find that whenever I am within range of one of my chosen Wireless networks it automatically uses Wi-Fi rather than 3G. When I am not my Ipad2 uses 3G.
So in essence Wi-Fi takes priority over 3G.

Have been unable to empty trash for the last 24hours, says it is being used by another task, how do I clear it. Thanks for any help.

Have been unable to empty trash for the last 24hours, says it is being used by another task, how do I clear it. Thanks for any help.

Generally when you get the resource in use error logging out or rebooting will take care of it. When a file just absolutely refuses to delete try restarting in Safe Mode (hold the left shift key after the computer restarts) and then empty the trash.

DENON AUDIO RECEIVER, Crackling in the all speakers with any device being used

Similar Messages

Maybe you are looking for