Deny application access to oid user

Hi
I'm developing an application that implements sso. The user that tries to access the application ( through any page ) is automatically redirected to the sso login page... so far, so good!
What I want to implement is the application access denial when an user, even existing in the OID, shouldn't access the application.
How can I accomplish such task using ADF UIX in JDeveloper 9.0.5.1. ?
Thanks in advanced
Vitor Cardoso

Thanks for reploy,
The way you have defined is better to avoide this issue,could you please tell me one thing,is there any request in application to disconnect all the user forcely on the spot who are connected and allow again to login in application only thoes user who have System Administator Responsibility,
--thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • Denying unwanted access for a user to a database

    Hi,
    Is there a mechanism in Oracle using which we can deny access to a user based on invalid login attempts made ? For example, in case a user logs in for the first time with an incorrect password, does the same the second time also, so at his third attempt, can we block the user and prevent login for say 24 hours ?
    Thanks and Regards,
    Mohan.

    Although I have not addressed this issue myself, it seems that it would be possible to setup this functionality yourself.
    1) Make sure you have auditing turned on.
    2) Create a logon trigger that searches audit logs for user from the terminal you are interested in and raises an application error if there as been 3 or more failed "create session" attempts in the last 24 hours.
    Regards
    Tim Boles
    Well this was fun....I am not sure it is "full proof" but I had fun trying to figure it out...took a little bit of researching on google and through the Oracle documents but hey you can tailor it to your needs.
    Turn auditing on
    Update your initialization file to have audit_trail=true
    bounce the database
    As sysdba
    SQL>audit create session;
    SQL>
    create or replace trigger logon_time after logon on database
    declare numfailed number;
    begin
    select count(1)
    into numfailed
    from dba_audit_trail
    where ACTION_NAME='LOGON'
    and RETURNCODE=1017
    and USERHOST=(select sys_context('USERENV','HOST') FROM DUAL)
    AND USERNAME=(select sys_context('USERENV','SESSION_USER') FROM DUAL)
    and timestamp>trunc(sysdate);
    if numfailed > 2
    then
    RAISE_APPLICATION_ERROR(-20001,'Not Allowed to Logon Database failed 3 times within 24 hours');
    end if;
    end;
    SQL>connect scott/scotttest
    Connected.
    SQL>connect scott/asfasdf
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>connect scott/asfasdf
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>connect scott/asfasdf
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>connect scott/scotttest
    ERROR:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-20001: Not Allowed to Logon Database failed 3 times within 24 hours
    ORA-06512: at line 13
    Edited by: Tim Boles on Apr 13, 2010 9:52 AM

  • How can I grant Application access to a user via API ) programattically

    how do I grant access to a portal user from API
    I want to grant access to a user from an API, ie I need a
    command to grant "SCOTT" access to "EXAMPLE_APP" APPLICATION as
    an end user?

    Hi,
    I am assuming that you have already updated the EUL in the Administrator Edition, correct? If not, open Discoverer Administrator and login to the database you want to connect to. You must use your EUL user name which I assume has already been created and assigned the correct privileges in the database. You will be asked to update your EUL. Follow the prompts.
    Once logged into the EUL, go to Tools \ Privileges and find the user that you want to give administrator access to.
    Hopefully, this answers your question.
    Regards,
    Nancy

  • How to allow application access to particular User while running payroll

    Guys,
    We are using Oracle Co-Hrms and payroll application and running fine,but one majore problem we face in every payroll,while running the payroll if any employee profile opened by any user ,which is inculde in assignment set of running payroll then system take much time,Howevery,rightnow we inform to whole department to don't use hrms between x to y time,but it is not effectivey properly and also not propery way according to this big Application "Oracle E-Business Suit,i think,there must be an opetion to cover this problem,
    Is there any possibilit to locke all of the user temporary excep one to two user,who work on Salary Process(payroll).
    Please advice
    thanks

    Thanks for reploy,
    The way you have defined is better to avoide this issue,could you please tell me one thing,is there any request in application to disconnect all the user forcely on the spot who are connected and allow again to login in application only thoes user who have System Administator Responsibility,
    --thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • SharePoint application access for external users

    Hi Everyone
    I hosted a SharePoint (2013) web application on port 29963 in Win 2012 VM.  In order to access it externally I add it to AAM  as below.
    AAM Settings
    Internal URL
    Zone
    Public URL for Zone
    http://owlag-web001:29963
    Default
    http://owlag-web001:29963
    http://intranet.owla.co.za:84
    Intranet
    http://intranet.owla.co.za:84
    IIS BINDINGS
    Allunassigned        29963
    HOSTS File
    172.18.1.205:84   intranet.owla.co.za
    Please can anybody check this settings and let me know if incorrect.
    Regards
    Prashanth
    SharePoint Administrator

    Hi Prashanth,
    check this thread, there are some things you need to do, like make sure DNS is properly configured
    https://social.technet.microsoft.com/forums/sharepoint/en-US/d106d7b1-b62d-4ec9-a7fe-521540d65bad/externalinternet-access-to-sharepoint-server-2010
    http://sharepoint.stackexchange.com/questions/42738/using-sharepoint-url-without-port-number
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • The user has denied all applications access to their media

    OK, so I have had this problem before and solved it unknowingly and now it is reoccurring!
    "error:
    Error Domain=ALAssetsLibraryErrorDomain Code=-3312 "Global denied access" UserInfo=0x169aa0
    {NSLocalizedFailureReason=The user has denied all applications access to their media.,
    NSLocalizedRecoverySuggestion=This setting can be changed in Preferences.,
    NSLocalizedDescription=Global denied access}"
    Please NOTE://I do not get this issue in the simulator - my code for iterating assets works perfectly on the simulator.
    Surely this is an easy fix but be damned if I can find anything under 'Preferences' anywhere that assists.
    Please halp!

    - Location services must be enabled for the application...
    I realise that there is geotagging involved but what a joke!

  • HR User, REST example - network access denied by access control list (ACL)

    Hi,
    I am new to APEX and am running the 'Oracle Developer Days' vm. I'm logged into APEX as the default HR/oracle account and I've been following the 'Creating and Using a RESTful Web Service in Application Express 4.2' training video, however when I try to retrieve information by entering a dept no. and clicking submit I get:
    ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-24247: network access denied by access control list (ACL)
    I've seen the following thread:
    ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP
    and I've tried running the command:
    GRANT EXECUTE ON SYS.UTL_HTTP TO HR;
    but I'm not getting anywhere, presumably the HR user does not have permissions to access 'http://localhost:8888/apex/hr/employee_test'
    Any help much appreciated, also if this is the wrong forum for this question please let me know.
    Many Thanks

    Hi,
    Thank you for the link; I executed the first block of code to 'grant connect privileges to any host for the APEX_040200 database user' that did not work so I changed the user to HR within the code and re-executed and that seems to have done the trick. I guess the HR user is now in the power_users list/group?
    Thanks again!

  • Access denied for all (most?) users in all site collections of web app

    Hi,
    I have a Sharepoint 2010 farm pre-SP1 (yes should be updated!) and for all site collections of a web app, all users are getting access denied.
    Now in my title I said "most?" because I have found one user in another office who does not have this issue. This web app/site collections also do not go through f5 or any proxies.
    Even if I add myself as a site collection admin via central admin, I get the same result. I've looked at everything, windows time on the server (not using kerberos), errors in event log (nothing), uls logs just say access denied (very helpful!), etc...
    I can try what's suggested at http://social.technet.microsoft.com/Forums/en-US/e66f1b09-605d-4546-a581-2a9283c238c0/access-denied-for-all-users-and-for-site-collections-owner?forum=sharepointgeneralprevious but when asking colleagues, there's been no
    changes, let alone with those accounts? I can do a get on the property tomorrow to find if there is a value set first, however.
    Any suggestions on this?

    Hi,
    Please try logging in the site with farm account.
    If it works, please make sure you have superuser and superreader accounts in CA > Application management > web application policy. If not, please add both accounts with the powershell script in the article below, this can cause all users denied when
    access the site:
    http://technet.microsoft.com/en-us/library/ff758656.aspx
    Here is a similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/a49b1ab8-273f-41e4-a0b8-be0e31c6733b/all-users-including-site-collection-admins-receiving-access-denied-from-one-site-collection?forum=sharepointadminprevious
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How to access a Portal User Info from a J2EE application?

    Hi,
    I have deployed a j2ee application in portal and its running fine.
    from that application i need to assign some roles to some users.i have the user id.
    so my doubt is can i access the portal user info from this j2ee application?i have some servlets in the j2ee application....can i get the portal user info from this servlet?
    plz help me
    regards,
    Visweswar

    Hi,
    Please check out this to get the portal user information from Java -
    WdClientUser class/Interface to aciehve this.
    Please check out these links on the same -
    WDClientUser.getClientUser IUser
    help needed
    Regards
    Lekha

  • I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

    I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
    Can someone direct me to a working page with this file or provide a different solution? Thank you!

    Hello,
    As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
    I would suggest you to contact Godaddy to either reset password or reset the permissions.
    Regards
    Vivek

  • How to set application access type for list of users

    Hi everybody,
    I've an requirement to automise the application access type setting in shared services.
    When i searhed to do with MaxL scripts.I'm able to set the application access type for a single user using
    alter user 'username' add application access type essbase
    alter user 'username' add application access type planning
    But,i've to perform this as a daily activity updating for list of users.Is there away to do it..??..i want to pass the list of users to the above alter user command.??
    Please help me.
    Cheers
    Saran
    Edited by: user11396937 on Aug 27, 2010 2:09 AM

    I discovered that changing "Image interpolation" optioon in general preferences of Photoshop has direct influence on smart object interpolation type. You can even reinterpolate smart object after changing image interpolation in preference. Just click ctrl + t and enter.

  • LDAP/OID Users granting other users access issue

    Hi,
    I have created 4 users (User1, User2, User3, User4) and 2 groups (Group1 and Group2)
    User1 is the Group1 owner and User2 is a member of Group1
    User3 is the Group2 owner and User4 is a member of Group2
    I have made both groups private.
    I have given User2 manage privilege on a portal page and have logged in as User2 and edited the page.
    When User2 tries to Grant access to the page, they can see all the users in the OID ie User1, User3, User4, Portal etc
    My thoughts were that User2 would only be able to grant access to other users in his group(s).
    Basically, I want to be able to control which users a user can grant access to on a page. Is this possible?
    Thanks
    Joel.

    What about SSL or LDAPS !
    Can't seem to find any java examples which would support services of type:
    ldapbind -U 1,2 for java API !

  • WPD Devices: Deny read access user policy

    Hi All,
    I have configured the following settings on my main group policy (user policy) and it has linked to my domain. 
    All Removable Storage classes: Deny all access Enabled  
    WPD Devices: Deny read access Enabled  
    WPD Devices: Deny write access Enabled 
    and in one of my sub ou GPO I have configured as "WPD Devices: Deny read access Enabled" (computer policy). when I checked with one user I found found that this user can access USB. there is no other configuration I made on this OU. as per above
    domain policy I have disabled All Removable Storage classes (mentioned above). then how it comes open ?. I just tried one more thing that is when I change WPD Devices: Deny read access in sub OU as Not-configured then USB will be denied. 
    I coudnt find any referrals in online regarding this.. can anyone suggest why it is happening ??

    Hi,
    >>as per above domain policy I have disabled All Removable Storage classes (mentioned above). then how it comes open ?.
    Before going further, what's the operating system we are using? Based on the description, this seems a litter bit odd. Here, had we run
    gpupdate/force to immediately update the policy setting? Besides, we can follow the procedure below to further collect group policy result to check how policy settings were applied.
    1. On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.
    2. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
    the proper user in the wizard)
    3. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
    >>in one of my sub ou GPO I have configured as "WPD Devices: Deny read access Enabled" (computer policy).
    If we try to enable the setting back, will the user still be able to access USB?
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some users and allow the access for some users?

    I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
    I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.  
    <location path="_layouts/15/InPlaceRecordsSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    <location path="_layouts/15/InPlaceRecordsListSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    When I tried the access on
    :<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.           
    Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
    Thanks
    Ramasubbu

    You can't do it from OOTB. 
    _layout folder is accessible to the users if they have read access in any of the site even subsite.
    You can modify *.aspx file, add your custom control which will check user.
    [custom.development]

  • Creating a domain with the access to specific user

    Hi,
    I tried creating a custom domain(soaAdmin) in BPEL with access to user. I could create new user ,new customdoaminadmin role and attach this role to new user.
    Problem is when we try to attach this role or user to new custom domain using JAZN tool command its not working.Following is the full description regarding this.
    Configuring Roles and Users for a File-Based Security Provider(from em help)
    If you are using a file-based security provider, you configure users and roles as follows:
    Navigate to the OC4J Home Page for the OC4J Instance.
    Click Administration to display the Administration page.
    Click the Go to Task icon in the Security Providers row of the Administration Task table.
    Enterprise Manager displays the Security Providers page.
    To configure roles and users for the default application, click Instance Level Security.
    OR
    To configure roles and users for a specific application, scroll to the Application Level Security section of the page and click the edit icon for a selected application that uses a file-based security provider.
    Enterprise Manager displays the Security Provider page.
    Click Realms to display the Realms page.
    The Realms page includes a table containing the defined realms for the selected security provider. The table contains a column that shows the number of users and roles defined for each realm.
    To configure the users for a realm, click the number in the Users column.
    OR
    To configure the roles for a realm, click the number in the Roles column.
    now if we see in setup of em we are able to see new user(soaAdmin) assigned to roles(BPMsoaAdminDomainAdmin,BPMCustomDomainAdmin).means we have user and role in realm.
    if we run the following jazn tool command to attach this user to custom domain(soaAdmin) it is not able recognize shell.
    java -Xbootclasspath/a:/home/oc4j/bpel/lib/orabpel-boot.jar -jar jazn.jar
    -shell -grantperm jazn.com -user soaAdmin com.collaxa.security.DomainPermission
    soaAdmin all
    or
    java -Xbootclasspath/a:/home/oc4j/bpel/lib/orabpel-boot.jar -jar jazn.jar
    -shell -grantperm jazn.com -role BPMsoaAdminDomainAdmin
    com.collaxa.security.DomainPermission soaAdmin all
    so we changed that command as follows and run in the j2ee home it is displaying that permission class is not found.
    java -classpath F:\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-boot.jar -jar jazn.jar -grantperm jazn.com -user soaAdmin com.collaxa.security.DomainPermission soaAdmin all
    as result of this we are not able to login to custom domain BPEL console with new user (attched error screen when we try to login).
    sources of information:
    http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/security.htm#sthref186
    How to create custom OID user/group to access new custom BPEL domain? from meta link
    Oracle Enterprise Manager Online Help .
    Could you please help me in this.
    Regards,
    Dhanumjay

    Hi,
    have you read
    Re: User access to only one domain

Maybe you are looking for