Dependency between two iViews

Hi all,
I have got the following problem. Maybe there is someone out there, who knows how to solve it?
I have got two WebDynpro-applications, which are bound into the portal as two webdynpro-iViews.
If one of those WebDynpros-is loaded/changed, the other WebDynpro-iView should be reloaded too.
Does anybody know to implement/customize this dependency?
Thank you in advance for your help!
Best regards, Patrick.

Hi Patrick,
You can use EPCF for this, which is also accessable from WD side. See http://help.sap.com/saphelp_nw04/helpdata/en/79/3857422d095542e10000000a1550b0/frameset.htm for details.
Hope it helps
Detlev

Similar Messages

  • Communicate between two iviews

    Hi everyone, if i create two iviews. And i want to pass a variable from one iview to the other one by triggling an event .
    What technology can help me do that?  Thx~~

    Hi Louis,
        Communication between two iviews is accomplished by EPCF concept.
      Refer to this forum thread where Prakash Singh has clearly explained about the same
    Communicate between two iviews
    Hope this helps.
    Regards,
    Joshua Kiran

  • How to transfer parameters between two iViews?

    Hi all,
    I have two WebDynpro based iViews (StartView and SecondView). when I press the button in the StartView, the EP will navigate to the SecondView. During this process, I want send a parameter value from the StartView to the Second View. In the StartView, I use the follow method to navigator:
    WDPortalNavigation.navigateAbsolute(
                  "ROLES:portal_content/com.sap.itsamtest/com.sap.secondpage",
                     WDPortalNavigationMode.SHOW_INPLACE,
                     (String) null,
                     (String) null,
                     WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
                     (String) null,
                     (String) null,
                     "value=From Start Page");
    In the SecondView, I use the WDWebContextAdapter to get parameter's value.
    String Name = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("value");
    It works fine. But I found there is a warning message:
    The method getRequestParameter(String) from the type IWDWebContextAdapter is deprecated     
    So is there any other good mechanism to implement the data transfer between two iViews.
    Thanks and Best regards
    Deyang

    Hi,
      Try the following:
    <b>Subscribing to a Portal Event:</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/0c/8eee31e383cd408bcb07e80b887463/frameset.htm
    <b>Code Example for Programming Portal Eventing:</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/0c/8eee31e383cd408bcb07e80b887463/frameset.htm
    <b>Regards,
    Sai Krishna.
    PS: Plz do assign points if it helps. ;-)</b>

  • URGENT:Eventing between two iviews in one page

    Hi all,
    I have developed a model in visual composer which contains
    two iviews in a single page .The first iview contains the input fields and the data service.The second iview contains the output form.I should get the output in the second iview when i click a button or a field in the table.I am unable to pass the data from one iview to another iview during thios process.And also help me in navigating between two different pages and data transfer between them.Please help me regarding this issue either by sending any documents or by giving useful suggestions,
    Points will be rewarded for helpful answer.

    Hi,
    see the modeler's  Guide
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe]
    For differenr layers creation
    Help .sap.com link  [http://help.sap.com/saphelp_nw04s/helpdata/en/ca/fbdb4269b2f340e10000000a1550b0/frameset.htm]
    Regards,
    Govindu

  • Reduce the size between two Iviews in Layout Page

    Hi All,
    I want to reduce the gap between the two iviews in the layout page of my portal.
    For this i have downloaded com.sap.portal.layouts.framework.par
    and i got two .js files
    1) WAandNavPanel.js
    2) light_navpanel.js
    So now in which file i have to change the size.
    Awaiting Replies.
    Thanks & Regards,
    Dhruv Shah

    better to keep backup of those two files before modifying.
    see modificationusing first jsp file in which u mentioned.
    How to change navigation panel default (initial) width?
    Remove/hide expand/collapse icons
    Points are welcome if it is helpful
    Koti Reddy

  • Interaction between two iViews on one page

    Hi Everybody!
    I have have one question and if you think I am blind, then I apologize for this.
    I have two iViews on a page. The First (iView 1) is showing a Link List from KM
    and the second (iView 2) is showing the content of an external link.
    I would like to implement the following logic:
    When the user clicks on a Link in iView 1, the content should appear in iView 2.
    Can this be done with standard iView parameters or do I need to implement it on my own?
    Thanks a lot and kind regards
    Ingo

    hi
    KM navigation has a core par file in USR(installation) directory com.sap.km.navigation use it in IDE eclipse or nwds and alter the code using epcf  and rename it as your class  and redeploy it  and make it as a template.
    you can use this way otherwise please do see the proerties of KM navigation iview  which may suggest the way out.hope this helps you .while using the code you have to implement epcm.donavigate and paa parameters to other iview.please don,t forget to give points
    with regards
    subrato kundu

  • How Can i communicate between two iviews?

    Hi all,
       I am having two iviews.I want to conect those two in two pages.How can i do this?Can any one help me out from this?
    regards
    Sudeep.

    Hi ,
    Try this
    WDPortalNavigation.navigateAbsolute("ROLES:"+iview,WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String) null,(String) null,"Param=Paramvalue");
    "ROLES:"+iview=Iview Path
    "Param=Paramvalue"=Parameter and its value
    Youcan receive the value as
    String parmvalue=WDWebContextAdapter.getWebContextAdapter().getRequestParameter("Param");
    Kind Regards
    Mukesh

  • Dependency between two Variables in query designer filter prompt

    Hi Experts,
    I'm working in BW 3.5 query designer and I have two characteristics ZONE and PLANT (both are filter variables) and what I need is that when the user make a selection of one ZONE (for example Zone north) then he will be able to see in the Plan Variable the values for selection that corresponds with the Zone selected previously in the other filter variable (ZONE).
    Thanks in advantage
    Roberth Reyes

    Hi shanthi bhaskar,
    Thanks a lot for your answer.
    I have one doubt about it:  with this solution that you propoused the user will be able to select the values for plant?.
    I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
    What happens if I need this dependency also in another variable like time variable?
    Thanks  a lot

  • Sequence dependency between two different operations

    Hi
    we start setup sequence dependency.when in from and to operations we have
    same operations with different Item class setuo time is showing in ASCP .but
    when we have different operations in ascp setuo time is not collected.please
    help us
    regards

    Chaining Value Chain Planning - EBS

  • Eventing between three iviews

    Hi all,
    I implemented three Iviews in a model and tried to define eventing between them in the following manner:
    - Output of iView1 is input of iView2
    - Output of iView2 is input of iView3
    Eventing is functioning well between iView1 and iView2, but it isn't doing between iView2 and iView3.
    Does eventing only work between two iViews once a page? Do I need a different EPCM event than "com.sap.visualcomposer:epcm" for the eventing between iView2 and iView3.
    Regards,
    Elyes

    Hi
    Did you give the event between iview1 and 2 and iview 2 and 3 different names.
    Jarrod

  • How do I set Time Machine to alternate between two attached external drives (so that if one fails I will have a separate backup to use)?

    Hi Everyone.
    Thanks in advance for your help.
    Right off the bat let me say I am using Mavericks 10.9.1 on a 2011 Macbook Pro and using all Lacie external hard drives.
    I am trying to get Time Machine to alternate between two attached external hard drives, trying to be safe in case one of the backup drives itself fails.
    I have both drives set in Time Machine.
    From what I gather Time Machine should by default alternate between drives when backing up (I would assume it does one big initial backup on each then subsequent backups are just changes).
    But this is not how it seems to be working and I cannot find a straight answer despite much Googling and Foruming
    Unfortunately it seems to only be backing up to "External Hard Drive 1".
    There have been 4 backups since I set it up, all on "External Hard Drive 1", even though "External Hard Drive 2" is also attached and set in Time Machine.
    I manually clicked "Back Up Now" and it started to work on "External Hard Drive 2" (like I want it to) for a minute but it appears to have stopped and gone back to backing up to "External Hard Drive 1".
    Am I missing something? Does Time Machine only move on to another disk when the first one runs out of space? Do I have to turn one off in order to force it to back up to the other drive (that would be less convenient of course)?
    I am hoping that I am missing something and that it will just alternate between the two. Otherwise it is not the most comforting and thorough backup system as I had hoped when I purchased the additional external hard drive.
    I have a 1TB drive and a 500gig partition on another drive, both dedicated to backups (my Macbook HD is 475gig). It will take awhile for each to fill up and who knows what could happen during that time. Having Time Machine alternate between hard drives would be a nice small bit of security if the worst happened.
    I realize that there are tons of other options for backing up but I just want to use Time Machine if I can.
    Again thank you for your help!

    You cannot use Time Machine in that way. I'm not sure where you heard that Time Machine alternates between drives automatically. What you can do is create a mirrored RAID array for the backup. This automatically duplicates whatever is on one drive onto the other drive.
    Both drives must be the same size, and prefereably, exactly the same make and model. RAIDs can be configured using OS X's Disk Utility.
    RAID Basics
    For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs.  Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
    RAID Tutorial;
    RAID Array and Server:
    Hardware and Service Comparison.
    Hardware or Software RAID?
    RAID Hardware Vs RAID Software - What is your best option?
    RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
    RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
    Pros and cons
    Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
    For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

  • Configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN

    Hi guys, really hoping that someone can help me with configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN.
    Basically, I have created a new forest and installed a new exchange organisation in this forest.  Both forests are located on the same IP subnet and a two way trust has been created between the forests.  Federated sharing has also been configured. 
    I can use ADMT to migrate the user and computer accounts to the new forest and also migrate test mailboxes over.  Ideally, I want to be able to do the mailbox migrations in stages so will need to be able to have mail flowing between the two forests. 
    I have read over the following article (http://ibrahimnore.wordpress.com/2012/09/06/configuring-smtp-namespace-sharing-between-two-exchange-forests-part-2/)
    which is good but it's demonstrating over the internet, can anybody advise how this can be achieved on the local LAN? 
    Any help greatly appreciated :-)

    Hi Gilliano,
    Thanks for correct link. I must say this is a very good article indeed, I read the entire article and if you go to the 3rd part of this article, please note the text "DOMAINC.COM is configured as Internal Relay Accepted Domain on both the domains"
    This is exactly what I asked you to check. Personally, I understand the method described in this article will work but its very complex to manage and administer, while the easiest option is to configure internal relay at the first place and no need to make
    so many DNS changes and customizations to your environment.
    The solution really depends on what your requirement is - Since you mentioned that you are migrating stuff over from source to destination - I feel this article is too complex for your situation and not really worth (for your requirement). The setup described
    in the article is an excellent choice if you are planning to keep both forests alive for longer duration due to several reasons like compliance or company mergers and so on...
    please let me know if my explanation is not clear enough.. we can even even have a one-on-one email conversation too!
    All the best!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva

  • Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

    Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
    FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
    From the vi used in the attachment,i encountered some problems at:
    (1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
    (2) How to synchronies the read & write btw contorller?
    All controller are communicating with each other directly without the need of a host computer to link them together
    Is there any other method to do fast data transfer betwe
    en controller?

    Hi YongNei,
    You were succesful in omiting enough information to make it very difficult to answer!
    Please post your example.
    Please tell us what version of LV-RT you are using.
    Please define what you concider "fast data transfer".
    Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
    WHat exactly has to be syncronized?
    If you have something that is close to working, share that.
    Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
    It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
    PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
    Trying to help you get an answer,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • SSRS expression for difference between two currency values

    Hi All;
    I need to get the difference between two currency values
    Below is my report
    I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
    Any help much appreciated
    Thanks
    Pradnya07

    =sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
    This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
    HTH

  • Is there a way to share my Mail account and settings between two partitions, running Snow Leopard and Lion?

    I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...

    You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
    An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used.

Maybe you are looking for