Dependents in benefit enrollment.

Hello All,
In the Family members and dependants Iview, if I add a child from today date, this new child is not visible in the select dependants in the enrollment in to benefits. Only after 31 days of adding the child we are able to add the child as a beneficiary in the enrollment ( Select dependants ). Is there any setting where this 31 days - time limit is saved?
Thanks,
Chakri.

Hi chakri somisetti,
Try this:
1. Basic Settings - Define Benefit Plan Status
2. Dependent/Beneficiary Eligibility - Define Dependent Eligibility Rules
3. Benefits Adjustment Reasons (for Dependents)
Cheers,
TG

Similar Messages

Who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

Hi Rakesh,
Who should handle benefit enrollement depends on client requirement.
In SAP Benefit Administration module we do have enrollment function.
Here is the document
http://help.sap.com/saphelp_46c/helpdata/en/7e/8a5f51545711d1891c0000e8322f96/content.htm
Client may chose to only store benefit related information and take help of other third party vendor and use interfaces to communicate it to SAP for payroll and master data maintenance.
Aon Hewitt is one of the well known vendors. Might be more not sure of all names.
Hope it answers your question.
Regards,
Jignya

Benefit Enrollment Callable Object

Hi Experts,
I am trying to implement Benefits Enrollment through GP process under "My First Days". I have copied the SAP delivered action for benefit enrollment as per note 968360.
The action has Input parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
I also have a callable object:
Object Definition:
Web Dynpro Application: BenefitsApplication
Package: com.sap.xss.hr.ben
Development Component: com.sap.pcuigp.xssfpm.wd.FPMComponent.
Parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
For some reason, the above configuration is working on portal. It is throwing an error:
No correct adjustment reason specified
How to get rid of the error. It is very clear that adjustment reason should be passed from GP Design time. But I can not figure out what is missing.

few questions
when you add the service that you have mentioned in the service area for an employee I want you to answer following
1. check the IT 378 entry and reply with how many reasons are configured for current period
2. in portal for the same employee how many services are seen
3. What is the link that you click and you get message "no enrollment reasons found"
I had a similar issue and this was because we enable a wrong service.
The correct service if enabled will show all the reasons configured for current period in infotype 378.

Benefit enrollment confirmation form

Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and whats the transaction.
Thank you very much.
saplover

Hi.
How solve this issue=
Kind regards

Benefit Enrollment Form Text

Can anyone direct me on how to change the text the Benefit Enrollment form?

Hi Ken,
You would have to copy the standard form HR_BEN_ENRO from 000 client to your customizing client and change description as desired. Iu2019d consult with the relevant resource on this.
Donnie

ESS BP-50.4 Benefit Enrollment - Dependant Selections

Hi - I have installed the ESS BP 50.4 and for benefit enrollment all of the screens that all you to select eligible dependants - the check box shows at the top of the screen when the dependant name shows in a table at the bottom of the screen....how/where do I correct this?
Thanks - Janet

Did you ever resolve this issue? I am experiencing the same issue.

ESS Benefit Enrollment Critical Error

We are getting a Crtical Error when we try to save ESS Benefit Enrollment in ESS Portal
The error says:
Field Symbol has not yet been assigned, error key: RFC_ERROR_SYSTEM_FAILURE.
Please advice

Amr,
It could possibly be related to your patch level. Check this [thread|"Field symbol has not yet been assigned" Error on Family data iview; out.
Good Luck!
Sandeep Tudumu

Benefit - Enrollment to delete a benefit plan

Hi,
The requirement is to delete a benefit plan (e.g. DENT) from enrollment screen (HRBEN0001):
a) Is to delete a benefit plan via "Define Benefit Programs" the best way?
a) Currently, there are employees already enrolled with benefit plan DENT and have payroll run with it. Is there any impact that need to be considered?
Thanks
Nikki
Edited by: Nikki_99 on Aug 5, 2010 2:39 PM

I think the requirement probably is to exclude this plan from showing up in 'HRBEN0001' for specific benefit adjustment reasons.
If this is the case, you can remove this through V_74HB_A (for health plan as it's Dental plan). Note, this only exclude the plan from showing up in benefit enrollment; it doesn't prevent user from actually adding this in IT0168 through PA30.
You really don't want to physically remove an existing benefit plan that's either currently or previously used as this would cause inconsistency.
Rgds.

Benefit enrollment for dependents ?

Hi Experts,
In my company, All employees are eligible for standard health plan, ( Includinf probationer ),
And for who has worked for 5 years or more ( in my company ) , Or with a posiontion higher than manager will be able to enroll this plan for their chidren or their spouse . I have defined dependents coverage in the IMG , Then i create the infotype 0021 ( family/related) ..For example : I create a new child , and the create the adjusment reason ...
But when i enroll for a spouse , or a child of an employee , the status 'enrolled' will disappear , this means to say that i can not enroll the employee and the spouse or child at the same time . In the cost report, there is always 1 choice ( EE only or EE +Spouse or EE + Child ) . Here i want to enroll for all of them and in the cost report , they will appear to calculate the cost ...
Thanks in advance

Hi,
Please try enrolling them from IT0167.
Hope this helps,
Reward points if helpful,
Thank You,

Benefit Enrollment (HRBEN0001) Showing Annual instead of PayPeriod Costs

HCM: In the Benefits Enrollment screen, when selecting a particular benefit plan, the Employee and Employer costs for that plan are supposed to display the cost amount defined in the cost rule for that plan and adjusted to the employee's pay period. For most of our plans, this is indeed what is happening. However, for our salaried US employees, it is displaying the annual cost of the plans instead of the pay period cost. This does not occur for our hourly-paid US employees nor does it occur for our salaried or hourly-paid Canadian employees. If we go into PA30 to adjust the benefit plan, we can change the period from annual to bi-weekly and save it but when we return to that plan, it has again reverted to annual. It occurs only for Insurance plans and not for Health, Savings, or any other plans. As well, it does not occur for all the Insurance plans but only for some of them. (We are running ECC 6 with support pack 18.) Any ideas/suggestions on how to correct this?
Edited by: Ken Rodych on Sep 8, 2010 9:55 PM

The problem appears to be the deduction model (thanks Sarah). I have to do more testing to confirm this and will let you know whether it resolves it. (I will also award the'Forum Points' at that time, depending on the results of my testing.)
Edited by: Ken Rodych on Sep 9, 2010 4:34 PM

Benefit Enrollment.

in benefit re-enrollment HRBEN0001 for employee setup with car allowance of wage type 1006 getting an error u201CError occurred when calculatingu201D . Kindly help.

Hi Kumarpal, we are in the process benefit re-enrollment, using HRBEN0001. we have few employees setup with
info-type 0014 (re-occuring payments used for car allowacne). if any employee has this info-type and has LTDI plan for
future date (begda 2009/01/01). 'Error occcured in calculating
salary' message appears in the error list. if I remove this info-type 0014, then there is no issue. Thank you so much
for your help.
Regards, Tom.

Help! Help! benefit enrollment conversion API doesn't work well!!!

We just acquired a big company. Now we are converting new employees benefit information from their system to our OAB. As
per Note:365034.1 suggested, I have been trying to use API
'ben_election_information.election_information_w' to create new enrollments in
OAB. Here are my questions:
1. There are two procedures named 'election_information_w' under package 'ben_election_information', which one
should I use?
2. Both above procedures require to pass in data to parameters 'p_prtt_enrt_rslt_id' and 'p_enrt_bnft_id'. If you don't pass such information
in, you would get the error message like 'PLS-00306: wrong number or types of
arguments in call to 'ELECTION_INFORMATION_W' ORA-06550: line 5, column 3:
PL/SQL: Statement ignored'. Obviously these are mandatory parameters. However,
you would get 'p_prtt_enrt_rslt_id' only after enrollment, if you do it in
professional user interface. How am I supposed to get this ID before an
enrollment is created? 'p_enrt_bnft_id', for some enrollment, there is no
benefit coverage, how am I supposed to get info for this mandatory paramenter?

you can pass null for these parameters while creating enrollments.
to get more info on oracle apis, you can refer Oracle Integration Repository.
http://irep.oracle.com/index.html

HR - Benefit enrollment for employees

I need a FM, BAPI, etc.. to enroll an employee into benefit programs (health, life, spending, etc...). How can this be accomplished?
Regards,
Davis

Check FM:
HR_BEN_CALC_ELIGIBILITY_DATE
HR_BEN_CHECK_MICRO_ELIGIBILITY
HR_BEN_CALC_PARTICIPATION_DATE
Also check:
Standard Reports in Benefits
Eligible Employees                                       (Report RPLBEN01)
Participation                                                (Report RPLBEN02)
Health Plan Costs                                         (Report RPLBEN03)
Insurance Plan Costs                                    (Report RPLBEN04)
Savings Plan Contributions                           (Report RPLBEN05)
Vesting Percentages                                      (Report RPLBEN06)
Changes in Benefits Elections                         (Report RPLBEN07)
Flexible Spending Account Contributions         (Report RPLBEN08)
Changes in Eligibility                                     (Report RPLBEN09)
Employee Demographics                                (Report RPLBEN11)
Changes in Default Values for General Benefits Info (Report RPLBEN13)
Costs/Contributions for Miscellaneous Plans     (Report RPLBEN15)
Stock Purchase Plan Contributions                  (Report RPLBEN16)
Benefit Election Analysis                                (Report RPLBEN17)
Contribution Limit Check                                (Report RPLBEN18)
Enrollment Statistics                                      (Report RPLBEN19)
Create Payment List Report                            (RPUBENPAYRQ)
Actual Hours report                                        (RPUBEN47)
[....Keep the Source also for future refrences|http://www.sapmaterial.com/list_of_standardreports.html]

Insurance benefit enrollment service not displaying Alternative Coverage

I am using service sap.com/ess~ben for benefits enrollment. I have set up an employee life insurance plan that has an enrollment limit of 250,000 before evidence of insurance is required. In the evidence of insurance configuration I have action 3 Create active record for biggest jump set. When an employee enrolls for more than 250,000 an insurance record is created with an Insurance coverage amount equal to the value enrolled and an alternative amount of 250,000, which is the EOI limit. The problem is that service displays the insurance coverage amount and the cost based on that amount instead of the alternative coverage amount and the cost for that amount.
Can the benefit service sap.com/ess~ben be set up to display the coverage and cost from the alternative coverage field instead of the Insurance coverage field?

The problem appears to be the deduction model (thanks Sarah). I have to do more testing to confirm this and will let you know whether it resolves it. (I will also award the'Forum Points' at that time, depending on the results of my testing.)
Edited by: Ken Rodych on Sep 9, 2010 4:34 PM

ESS Benefit Enrollment - No correct adjustment reasons specified

We are in ECC 60. When testing ESS benefit open enrollment (under Content Admin - Portal Content - Content Provided by SAP - End user content - ESS - Iviews - Benefit and Payment - then either test on 'Enrollment' or 'Flex Bens Enrollment)', we keep getting error 'No Correct adjustment reasons specified' .
I already configured 'Benefit Area Admin Paramenter' to have open enrollment period to be active for month of April (for testing), and also assigned proper role in 'URL of PCD Page' for resource key 'EMPLOYEE_GENERICENROLLMENT_SERVICE05', and yet still get the error message. Searching SDN for this issue, I see that some people also had similar issues before, but there doesn't seem to be a concrete / clear solution. Appreciate if someone can shed some light on what I'm still mising .
Thanks.

Hi Ted,
Not sure if this would help.
You can try the below thread..... It also has reference to an OSS Note.
[Adjustment Reason;
Good Luck !!!
Kumarpal Jain.

Dependents in benefit enrollment.

Similar Messages

Maybe you are looking for