Deploy JDBC driver .

Hi All,
I have closed my previous thread.
I have this Information with me to connect to Oracle Database.
The IP provided by my ISP is:62.234.221.193
port on which oracle running is:1521
Oracle global database name: BBB
Oracle SID: AAA
1. Where I will find Oracle JDBC driver and how and where will I deploy ?. Pls help
2. What I will give in JDBC driver in JDBC Adapter ?
3. In Connection jdbc:oracle:thin:@62.234.221.193:1521:BBB -- is this corrcet?
Pls help for the above points.
Regards

> 1. Where I will find Oracle JDBC driver and how and where will I deploy ?. Pls help
If am not wrong then you can find it on Oracle DVD's, better to check this..
Where can i download the util.jar and base.jar File?
> 2. What I will give in JDBC driver in JDBC Adapter ?
Just search on SDN for file to JDBC and you will lots of blogs, there you will find all information regaarding adapter configuration.
> 3. In Connection jdbc:oracle:thin:@62.234.221.193:1521:BBB -- is this corrcet?
the string "jdbc:oracle:thin:" can vary with oracle version. So this may be correct or may be incorrect.
Regards,
Sarvesh

Similar Messages

Deploy JDBC driver for SQL server 2005 on PI 7.1

How to deploy JDBC driver for SQL server 2005 on PI 7.1
We are in SAP NetWeaver 7.1 Oracle 10G
Third party system is SQL server 2005
There are different JDBC versions are available to download for SQL server 2005.
I am not sure about the applicable version for the PI 7.1 SP level. Again JMS Adapter needs to be deploy along with this.
Please help

Hi,
Hope this How to Guide help you.
How To Install and Configure External Drivers for the JDBC & JMS Adapters from
www.sdn.sap.com/irj/sdn/howtoguides
Regards,
Karthick.
Edited by: Karthick Srinivasan on Apr 13, 2009 4:07 PM

Deploying JDBC driver for SQL Server 2005 on PI 7.1

How to Deploy JDBC driver for SQL Server 2005 on PI 7.1 on Windows 2003 server
We are in NW PI 7.1 and third party db is sql server 05.
Found How-to Guide SAP NetWeaver u201804 but unable to find for NW PI 7.1
Can any one help me on this? (looking for guide step by step procedure)
Regards
Mahesh

Hi,
Check these:
Re: Installing JDBC Drivers for PI 7.1
how to deploy MS Sql Server 2005 and 2008 jdbc driver
Mention of a SAP Note in the first link or refer this note [831162|https://service.sap.com/sap/support/notes/831162]
Regards,
Abhishek.

Error in deploying JDBC driver

Hi All
while deploying JDBC driver i am following tthis guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
while i run the command C:>drivertool add aii_af_jmsproviderlib.sda msbase.jar mssqlserver.jar msutil.jar ojdbc14.jar
i am getting this error
ERROR: could not open SDA : INVALID SDA: error while parsing provider.xml: java.io.FileNotFoundException c:library.provider.dtd (system cannot find the file specified)
can anybody give me the solution where can i find this library.provider.dtd?
how can i remove this error
Thanks
sandeep

Hi rajeev
i have put driver tool files and also .sda file and sqljdbc.jar file in c:\drive but still i am getting this error
C:\>drivertool add aii_af_jmsproviderlib.sda msbase.jar \
mssqlserver.jar msutil.jar ojdbc14.jar
SAP XI 3.0 JDBC/JMS Driver Tool. Version 1.0.1615
Copyright (C) 2005 SAP AG. All rights reserved.
Adding driver JAR(s) to aii_af_jmsproviderlib.sda:
msbase.jar - Error: jar file not found
mssqlserver.jar - Error: jar file not found
msutil.jar - Error: jar file not found
ojdbc14.jar - OK
Writing changes to SDA. This may take a while, so please be patient.
any suggestion?
Thanks
sandeep

Error deploying JDBC driver for SQL Server 2005

Hi all
I'm trying to deploy a JDBC driver for MS SQL Server 2005 (downloaded [here|http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en]). When I try to deploy it according to the instructions found [here|http://help.sap.com/saphelp_nwce10/helpdata/en/51/735d4217139041e10000000a1550b0/frameset.htm] it fails.
The error in the logs doesn't give any useful information though. It only says Error occurred while deploying component ".\temp\dbpool\MSSQL2005.sda".
Has anyone else deployed a driver for SQL Server 2005, or perhaps have any suggestions of what else I could try?
Thanks
Stuart

Hi Vladimir
That's excellent news! Thanks for the effort you've put into this. I'm very impressed with how seriously these issues are dealt with, specifically within the Java EE aspects of SAP.
May I make two suggestions on this topic:
1. Given that NWA has such granular security permissions, please could the security error be shown when it is raised? This would help immediately identify that the problem isn't actually a product error, but rather a missing security permission (and thus save us time and reduce your support calls).
2. Please could the role permissions be clearly documented (perhaps they already are, and I just couldn't find the docs?) so we know what is and isn't included in the role. The name is very misleading, as a "superadmin" is generally understood to have no limitation on their rights - so clear documentation on what is in-/excluded would be most helpful.
On a related topic, I came across another issue like this that may warrant your attention (while you're already looking into NWA security issues). I logged a support query about it (ref: 0120025231 0000753421 2008) in case you can retrieve details there (screenshots, logs, etc.). It's basically a similar security constraint when trying to create a Destination. I'm not sure if this is something you would like to include as standard permissions within the NWA_SUPERADMIN role or not, but I think it's worth consideration.
Thanks again for your help!
Cheers
Stuart

Software deployment manager to deploy JDBC driver

Hi Guys,
I am trying to Install JDBC drivers for the
ORACLE 10.2.0.2.0. I dont know where Software Deployment Manager will be. Please let me know the URL. I have a guide HowToInstallExternalDrivers.pdf.
Thanks
Rajanikanth

Hi Barry,
I went to the program and listed, i see all all the below.
RemoteGui.bat
RemoteGui.sh
Snap0001.20070609.020233.671794.trc
StartServer.bat
StartServer.sh
backup
bin
config
core.20070609.020233.671794.dmp
dev_SapStart
doc
inBox
instfiles
To Start SDM i need to give the command $StartServer right
Thanks
Rajanikanth

How to deploy MS Sql Server 2005 and 2008 jdbc driver

Hi SAP Guru's
Can somebody tell me how to deploy the jdbc driver of MS SQL Server 2005 and 2008 on SDM.
According to the SAP instruction we should have 3 files(mssqlserver.jar,msbase.jar,msutil.jar) but in 2005 driver file we only have 1 file i.e sqljdbc.jar so how do i deploy it .
Secondly i cannot deploy it on visual administrator as well and when i am doing the File to jdbc scenarion i am getting this error
" Accessing database connection "jdbc.sqlserver://localhost:1433;DatabaseName=Employee failed DriverManagerException. Cannot establish connection to URL jdbc.sqlserver://localhost:1433;DatabaseName=Employee SAPClassNotFoundException com.microsoft.sqlserver.jdbc.SQLServerDriver".
can somebody please upload the screen shots on mediafire or any other site so that i will solve my problem.

Hello,
*OS: First of all: *
3 files (msbase.jar,mssqlserver.jar and msutility.jar )should be zipped to aii_af_jmsproviderlib.zip file only for UNIX OS.
For Windows OS only sqljdbc.jar file which in every version of JDBC driver should be zipped to aii_af_jmsproviderlib.zip.
You can deploy JDBC driver through SDM tool which mention in guide below:
New version of JDBC driver installation guiade:
External Driver Configuration for Process Integration 7.0
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60237e74-ef19-2b10-5a9b-b35cc6a28e83
Drivertool from this guide you can find at https://www.sdn.sap.com/irj/sdn/howtoguides
Then Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 HYPERLINK "https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f"
How to Install and Configure External Drivers for JDBC & JMS
AdaptersHYPERLINK "https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e00262f5-934d-2a10-b99c-9bc63c2a7768"
Download attached system files (ZIP 16KB)
Any questions - let me know
BR,
Dzmitry

JDBC driver for Microsoft Access

Hi, I have gone through the blogs and threads related to this topic. I found contradicting threads one saying we need to deploy Access JDBC driver and another saying no need to deploy JDBC driver for Access.
Integrate PI7.0 with MS Access 2003 Database - Says need to install driver for Access
Re: Problem when connecting to MS Access through JDBC Adapter. - Says no need to install driver for Access
I am now confused if I need to ask my Basis team to deploy driver for this. If some one has executed this scenario successfully, could you please confirm whether a driver needs to be installed or not. Also if it is required to install a driver, could you please let me know from where I can download the driver.
My PI version is 7.1 and Access version is MS Access 2007. PI is deployed on Linux.
Without asking for deploying driver I have configured scenario File->PI->Access and I am getting below error in my receiver JDBC communication channel.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Can not establish connection:: SAPClassNotFoundException: jdbc.odbc.JdbcOdbcDriver";
Please suggest how to resolve this issue.
Regards, Prasad

Hi .
The format for Access 2007 is accdb . Are you using this format or MDB?
Anyway try this:
Driver={Microsoft Access Driver (*.mdb, *.accdb)};Dbq=C:\Test\TestDB.accdb;Uid=Admin;Pwd=;

Error when SDM JDBC driver for Oracle

When deploying the JDBC driver for Oracle on PI 7.0, I failed to achive. I got the following trace information from SDM.
After checking the system directory structure, I found that very interesting thing. First I downloaded aii_af_jmsproviderlib.sda from the directory of ../SAP AG/0/3.0...and zip oracle jdbc driver into it, and I deployed the sda file with SDM back to the system with the option update deployed SDAs that hava any version. Curious the sda file was put into another directory of ../SAP AG/1/3.0... a new directory which was just created during the deployment.
This never happen before and is this the reason why deploy failed.
Aborted: development component 'com.sap.aii.af.jmsproviderlib'/'sap.com'/'SAP AG'/'7.0009.20060728142055.0000'/'1':Caught exception during deployment from SAP J2EE Engine's offline deploy API:com.sap.engine.tools.offlinedeploy.rdb.ODeploymentException: ERROR: Can't deploy component with sda /usr/sap/XID/DVEBMGS00/SDM/root/origin/sap.com/com.sap.aii.af.jmsproviderlib/SAP AG/1/7.0009.20060728142055.0000/aii_af_jmsproviderlib.sdajava.util.zip.ZipException: reading zip file central directory failed at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:123) at java.util.zip.ZipFile.<init>(ZipFile.java:144) at com.sap.engine.tools.offlinedeploy.rdb.OfflineComponentDeployImpl.deployComponent0(OfflineComponentDeployImpl.java:400) at com.sap.engine.tools.offlinedeploy.rdb.OfflineComponentDeployImpl.deployComponent(OfflineComponentDeployImpl.java:266) at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOfflineDeployerImpl.performDeployment(EngineOfflineDeployerImpl.java:209) at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96) at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224) at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60) at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186) at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48) at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83) at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60) at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127) at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73) at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59) at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108) at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72) at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67) at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76) at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286) at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43) at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39) at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50) at java.lang.Thread.run(Thread.java:534) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineOfflineDeployerImpl.performAction(DeploymentActionTypes).ODEXC)
Deployment of com.sap.aii.af.jmsproviderlib finished with Error (Duration 25376 ms)

Hi
I used this document do deploy jdbc driver
How To Install and Configure External Drivers for theJDBC & JMS Adapters ver3.01.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
I used drivertoll to adding driver jars
sds
Marco Zerbini

Deploy a new JDBC Driver on SAP Netweaver 7.1 CE

I would like to deploy a new jdbc driver on the SAP NetWeaver 7.1 CE
bI have a Guideline where the steps are discribed until a message says
to download a jdbc driver file ojdbc14.jar . The File exist on the AIX 5.3
but the message wants to install the driver file from my local PC.
Is there a possibility to access to the AIX and select the file via Netweaver ?
In the Configtool is the jdbc connector not available so I cant do the configuration there
Thank for your Help
BR,
Vito

Hi Vito Cecere,
Please logon to your AIX system.
logon to your CE system NWA being in the AIX system then it's possible to access the file.
Otherwise, being in your desktop/laptop it's not possible to access your AIX file system due to fact that files are not mounted to that level access.
If this doesnot answer your concern please write back.
Regards
Sekhar

Microsoft JDBC Driver deployment error

Hi there, I have install XI 30 and patched it till SP14, and when I try to deploy the MS JDBC Driver as per SAP instructions, I get an error stating "..same version", but the 3 options below are grayed out, so I can't select the "Update any version" option. What could be the problem?

Hi,
You have to select the option on the first screen where you add the SDA file in SDM, right before you press "next" for the first time....
(Normally the options are hidden in the bottom of the screen, and must be "opened" by pressing the "up arrow" in the bottom right of the SDM screen).
Regard
Rolf

JDBC Driver Deployment

Hi All,
I'm in the process of deploying the drivers required for the JDBC adapter. I'm following the documentation (and using the tools) provided in the following link:
https://websmp206.sap-ag.de/~sapdownload/011000358700007048402005E/HowInstallExternalDrivers.zip
When I run the deployment using SDM, the process runs smoothly and the log also returns no error. But I'm unable to find the folder (and the driver JARs) com.sap.aii.af.jmsproviderlib under /usr/sap/<SID>/DVEBMGS<SYSNO>/j2ee/cluster/server0/bin/ext (as specified in the doc.). The deployment run did not prompt for a J2EE restart, though it didnt return any errors either. Will a manual restart help? Or do I need to verify anything else before restarting?
Thanks in advance.
Regards,
Bharath

Thanks to those who replied.
I tried refreshing the cache, restarting the J2EE server and the XI server too, but to no avail (i.e., folder did not get created).
Then I thought I will really stretch my luck and tried executing the scenario, but came across the following (expected) error in the RWB:
<..JDBC adapter receiver channel AR_JDBC_Receiver not initialized. Unable to proceed due to Loading jdbc driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver' failed: java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver Found in negative cache..>
Any other pointers?

HELP!!! Cannot deploy J2EE application with Oracle JDBC driver...

Hi,
I am writing a J2EE application which (in theory, at least)
connects to an Oracle 9i database.
I have written a simple Java test app utilising only the
java.sql package classes (e.g. Connection, ResultSet) to directly
connect to the database. As long as the classes12.zip is in the
CLASSPATH it works fine.
Now I have written an Enterprise application (SessionBean,
Remote and Home interface and Client) which I am attempting to
deploy via deploytool.
If I include just the client jar and EJB jar in the application
it deploys okay but when I run the application (using runclient)
it produces the following error:
java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
(It is nested within other error output but that is the core
issue).
However if I try to include the JAR libraries into the app
(classes12.jar and nls_charset.jar from $ORACLE_HOME/jdbc/lib),
then I get the following output from deploytool when I hit the
"deploy" (or "redeploy") button:
Deployment error: invalid entry compressed size
(expected 14411 but got 14580 bytes)
Can someone please tell me what is going on???
How can I deploy the J2EE application including the Oracle
JDBC Driver???
My only other option at the moment is to place all the function-
-ality in the client and not use the J2EE framework.
Any help is greatly appreciated.
Regards,
Ben New
Leftclick Software Development
[email protected]

OK Ben,
I admit I'm a bit confused. Let me see if I understand where you're
coming from.
You have written a J2EE application that includes a session bean,
correct? If so, your session bean needs to be deployed to an EJB
container. What container are you using? The Oracle 9i database
has an embedded EJB container which (theoretically) you can use.
However, as far as I know, Oracle recommends you use OC4J as the
EJB container. So again I ask, what EJB container are you using?
If, as you say, you are new to EJB, then I think you should
immediately start working wiht OC4J as your EJB container.
Did you look at the tutorial link I gave in my previous post? It
explains -- step by step -- how to create, deploy and run a J2EE
application using OC4J as the EJB container. It also has links to
introductory material for people without little knowledge of J2EE
and EJB.
I have 9iAS Enterprise Edition and 8.1.7.1.0 database server (and
OC4J) installed on my SUN machine. I cannot find any of the
utilities you mention -- "j2eeadmin","runclient" or "deploytool".
What Oracle software have you installed? What are the versions?
What platform are you using?
A J2EE application (according to the specification from SUN)
consists of modules. A module can either be a client module or an
EJB module. A client module can either be a java application client
or a web-based client (servlet or JSP). A J2EE application usually
contains one client module and one EJB module. A J2EE application
needs to be deployed to a J2EE container.
Hopefully the J2EE picture is becoming clearer. I think you need
to read some introductory material regarding J2EE if you intend
to become proficient at it.
I feel that you are under the impression that a J2EE application
is a glorified JDBC application. It isn't (as far as I'm aware).
Good Luck,
Avi.

So hard to deploy a JDBC driver

My PI7.1, I use the "netwaver Administrator" CM->Application Resources to deploy the jdbc driver of postgre, it told me the deploy is OK, but the "Status" of the driver is "Unknown".
And when I try to invloke a channel which uses this postgre JDBC driver, it throws exceptions: can not find class org.postgresql.Driver
What should I do !!! I grep much time in the forum but did not find any clue yet

https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1138877
FYI~~
Summary
Symptom
This note describes the procedure for deploying 3rd party drivers on PI 7.1 using JSPM.
Other terms
JMS, JDBC, 3rd Party, Drivers, JSPM, com.sap.aii.adapter.lib, provider.
Reason and Prerequisites
When connecting to 3rd party software using JDBC and JMS adapters, external drivers need to be provided.
These 3rd party drivers need to be bundled in com.sap.aii.adapter.lib.sda provided by the adapter engine installation.
Prior to PI 7.1 this was done using the SDM tool, however, in PI 7.1 JSPM is used to deploy com.sap.aii.adapter.lib.sda.
This note described the steps for deployment using JSPM.
Solution
For the JMS Driver only
Prepare the JMS provider file as follows:
1. Copy the external drivers from the provider directory to a separate directory.
For example the SonicMQ driver file is called client.jar and is located in the lib subdirectory of SonicMQ installation directory.
2. Open the driver file with a zip program and remove the standard JMS classes. These are located in directory javax/jms.
3. Save the modified driver file.
For the JDBC Driver and the JMS Driver
Add the modified driver files to the lib directory of the archive com.sap.aii.adapter.lib.sda with the help of a zip program.
Then to modify the provider.xml file in the server directory of the archive com.sap.aii.adapter.lib.sda, proceed as follows:
1. Extract provider.xml using a zip program and edit it as follows:
a. For each external driver file that needs to be bundled in com.sap.aii.adapter.lib.sda, add the line <jar-name>lib/driver-jar</jar-name> in the <jars> section.
If you want to install the SAP DB JDBC driver and the SonicMQ JMS driver, this section looks like this:
<jars>
<jar-name>lib/sapdbc.jar</jar-name>
<jar-name>lib/client.jar</jar-name>
</jars>
b. Return the changed provider.xml to the archive.
Make sure that the original directory server\ is retained under Path in the zip archive.
2. Add all external driver jars that you have defined in provider.xml to the lib directory in the archive com.sap.aii.adapter.lib.sda.
3. Use the JSPM tool to deploy com.sap.aii.adapter.lib.sda.
a. To start JSPM, run 'go' from the /usr/sap/<SID>/<Central instance name>/j2ee/JSPM/ directory.
b. Log on with the AS Java username and password.
c. Select 'HotFixes' option as the package type.
d. Place the com.sap.aii.adapter.lib.sda in Inbox directory.
This will be mentioned in the Select Package Type dialog.
By default this is
<HOST>\sapmnt\trans\EPS\in.
e. Select Next.
f. If no applicable development component(s) are found in the Inbox directory then:
i. Check to see if the Inbox directory is correct and has the com.sap.aii.adapter.lib.sda.
For more information on this refer to 'Detecting and Changing the JSPM Inbox Directory' section of the JSPM documentation.
ii. JSPM does not allow to deploy an SCA/SDA with the same version (release, SP-level, patch-level) as an already deployed component.
In such a case, the com.sap.aii.adapter.lib.sda will not be listed in the Specify Queue dialog box.
To force the deployment of an such SCA/SDA ignoring version rule run the 'go' command as follows:
go -config=/jspm/forceMode=true
-config=/jspm/deployVersionRule=updateAll
For more information on this please refer to SAP Note 1123333.
f. Select the hot fixes to deploy. In this case sap.com/com.sap.aii.adapter.lib and press Next.
g. For more information about deployment procedure, refer to JSPM documentation.
FAQs
Q1. Where can I find JSPM documentation?
Ans. Link to the JSPM User Guide on SAP Help Portal:
help.sap.com -> Documentation -> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) -> choose a language -> SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Solution Life Cycle Management by Key Capability -> Solution Life Cycle Management by Key Capability -> Software Life Cycle Management -> Software Maintenance -> Java Support Package Manager
Q2. Where can I find more information on JSPM?
Ans. Refer to SAP Note 891983
Q3. I am unable to see any SCA/SDA in the Specify Queue dialog box.
OR
I get the message "No applicable development component(s) found in the Inbox directory"
OR
How do I force the deployment of a component ignoring version rules ?
Ans. Refer to SAP Note 1123333.
Q4. Where can I find more information on the JMS Adapter?
Ans.Refer to SAP Note. 856346.
Q5. Where can I find more information on the JDBC Adapter?
Ans. Refer to SAP Note. 831162
Q6. Which external driver files do I need to bundle in the com.sap.aii.adapter.lib.sda?
Ans. Refer to JMS and JDBC Adapter notes mentioned above.
Q7. What are some of the things that have changed with respect to the adapter lib from XI 30 to PI 7.1?
Ans. The library name has changed from aii_af_jmsproviderlib.sda (releases 3.0/7.0) to com.sap.aii.adapter.lib.sda (release 7.1).
The component name has changed from com.sap.aii.af.jmsproviderlib (releases 3.0/7.0) to com.sap.aii.adapter.lib (release 7.1).
Even the directory structure has changed. The com.sap.aii.adapter.lib.sda (release 7.1) has a lib directory in which all the external drivers need to be placed.
This was not present in aii_af_jmsproviderlib.sda (releases 3.0/7.0) and the external drivers were placed in the root directory of the archive
Q8. Can I use the DriverTool (provided with XI 3.0) to bundle the jars in com.sap.aii.adapter.lib.sda?
OR
Is there a new DriverTool for bundling the external jars in com.sap.aii.adapter.lib.sda?
Ans. No. Due to the changes mentioned above, the DriverTool provided with XI 3.0 cannot be used to bundle external drivers in com.sap.aii.adapter.lib.sda.
No. There is no new tool for bundling the external jars in com.sap.aii.adapter.lib.sda. This needs to be done manually as described in the steps above.

JDBC driver - OWB deployment error

I am using OWB 11.2.0.3 and I'm trying to connect to a SQL SERVER 2008 R2 database by using a JDBC driver sqljdbc.jar.
The connection works, I can import the tables but when I try to deploy the mapping I get the following error:
java.lang.reflect.UndeclaredThrowableException; nested exception is: java.lang.reflect.UndeclaredThrowableException; oracle.oc4j.rmi.OracleRemoteException; java.lang.reflect.UndeclaredThrowableException
I have tried with JDBCS driver 3 and 4. Does anyone know where the problem is?
Edited by: 931311 on 16.05.2012 12:27

Don't have a answer to your specific issue, but have a question. Where are you running the agent? I started with the agent on the client, but learned eventually that it had to be on the runtime server. I am currently also working through issues with OWB support. My issues appear to be runtime issues at this point.

Deploy JDBC driver .

Similar Messages

Maybe you are looking for