Deploy Library Loading Screen

I have a very large shared variable library using the DSC module Labview 8.6.1. I am deploying the library when the project starts and that part is working fine. However, because the library is fairly big it takes up to a minute to deploy all the shared variables. During that time my VI is sitting there unresponsive. I've made a "startup" vi that deploys the library and then opens the top level vi, but even then during the startup vi it is just sitting there with no indication to the user that anything is loading. In development when you deploy the library, a popup displays the progress of the deployment. Is there anyway to incorporate that into a build when the library is programmatically being deployed? I would just like some indication to the user that labview hasn't crashed and things are still being loaded. That's all I'm really after.
Thanks.

anybody? I'm guessing this is not possible.

Similar Messages

Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!

Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

IPhone connects/charges on system boot up. When it gets to Windows 7 loading screen it disconnects.

Hello to all who read,
I've usually used my iPhone with my iMac so perhaps that's the issue in itself. But now I've done away with my iMac and trying to connect and update my phones music library through the latest Windows iTunes. My iPhone refuses to connect to my laptop no matter which USB port I use. I've observed however it does connect to my laptop when it boots up and when it hits the Windows loading screen then it disconnects.
So I'm assuming there is something in the Windows set up that is making the iPhone disconnect when Windows loads. I've looked at multiple tutorials floating around but to no avail either.
Any help would be greatly appreciated as I desperately need to update my iPhones music.
Cheers.

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
If both the above tests pass, try the following.
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, insert the CD into the notebook and restart to boot from it. Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
If the above fails to help, make a note of any error messages you may get during the procedure and include them with your next post.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Loading screen above Applet from an iframe

Hi,
i am running this code for loading screen which is transparent
http://www.andrewpeace.com/loading-screen.html
now i am placing an iframe
<p><iframe src="http://statlab0.fon.bg.ac.yu/eng/eng/apletieng/buffon/Coin.html" id="appletFrame"></iframe></p>
so that i may also come behind the loading screen. But the applet is coming in front of the loading screen and not goin behind the screen. can anyone suggest a way to let the applet also to be behind the loading screen.
the above html had the javascript code for loading screen.
if anyone can help out today :(
i am in urgent need.

No, but maybe a trace could shed some light on the problem:
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0_03.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)
Print out the full trace of the exception:
try{...}catch(Exception e){e.printStackTrace();}

Final Cut Pro crashes during load screen.

When I open FCP, the loading screen comes on. During the loading, FCP closes. There is no error message.
I have already tried the two solutions posted as announcements on the top of the FCP forum:
1. I have deleted unnecessary Quicktime components from (Library>Quicktime).
2. I have downloaded the most recent software update.
Thanks for any suggestions you might have,
Jonah
Powerbook G4 Mac OS X (10.3.9) the whole Final Cut Studio is installed

A solution from an earlier post solved my problem. I deleted the Final Cut Pro preferences ("Final Cut Pro 5.0 Prefs") (MAC HD> Library> Preferences> Final Cut Pro User Data). FCP opens now.
Here's the post where I found the solution:
http://discussions.apple.com/thread.jspa?threadID=667655&tstart=15
Powerbook G4 Mac OS X (10.3.9)

[noob question] whats the best way to load movieclips with a loading screen

for each level i have a number of movieclips bitmaps and sprites etc.. should i just load multiple swf's of everything in my level or keep all objects in the library and call upon them in the main fla
this is for a mobile game btw.
I have a loading screen.png file also, how do i know when each item is finished loading to stop the loading screen image?

If you have money to spend, I would recommend using Oracle's Application Test Suite (ATS) since it is the only test tool I know of that allows you to create a functional test and then convert it to a load test. The capabilities of this tool are pretty amazing considering that it is a single tool where the go to toolset in the past was Win Runner / Load Runner. With Win Runner, you needed 50 machines (or VMs) if you wanted to generate front end load for 50 users. With ATS, you record a script with your browser, and then convert it into a load test. You can adjust things like think time, ramp up time, sustained load, etc.
What a lot of people miss is that testing tools can be used indefinitely, not just for getting through a migration. If you script your tests appropriately (which means that your user base trusts them), you can use them for every code release because it takes very little effort to run a test script. On top of that, you can set up strategically placed machines around your network that are set up to run a specific test script (think of a common transaction) so that performance metrics can be captured. I worked for a company that had 160 locations around the world and we used our testing tool as a performance monitor in the locations with the worst performance. Having a tool allowed us to see whether our performance issues were related to network, database, app servers, etc. This took the burden of explaining performance issues off of the users. Most users can't really articulate what the problems are anyway (and they aren't expected to).
If budget is an issue, you can use JMeter from Apache, which will give you the load testing capability but you will miss out on the excellent reporting and management capabilities of the Oracle Application Test Suite.

Ovi store stuck on loading screen (N8)

So I have this problem lately. I instaled new ovi store app and it get stuck on loading screen everytime I try to run this app.
I tried to reinstall it, I tried to reinstal phone soft and ovi store after and nothing changed.
pls help me with this. I cant use ovi store at all :/

Ok guys, I could solve the issue with some easy steps:
1) First, reset and restore.Do not restore backup because will restore corrupted files at the QT library, hence making the phone not working fine.
2) Now begin setting up your Nokia account and e-mail. Restart.
3) SW update now including ovi store. Access OVI store and update again. Restart.
4) Now, if you access the OVI store it will get stuck on "loading", so do not do it. You need now to connect the phone to your computer and install the support software from OVI SUITE. Then, disconnect and restart.
5) Now access OVIMAPS on your phone and setup automatic connection with your nokia account. Restart.
6) Great. You can access OVI STORE now and download whatever you want. You can also use the backup restore if you want but doing so will block some apps from uninstalling.
Everything is ok now. Have fun ;D

Unable to boot Z10, stuck on loading screen at 99% after a few hours.

Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions. Running a Bell Canada 10.1. Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%. I tried plugging it in BB Link and computer will not recognize it.

dazedandconfused wrote:
Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
I've answered your thread already, here:
Re: Z10 stuck on loading logo on starting up
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My White Macbook is stuck at the loading screen, and disk utility, safe mode doesn't work either. What should I do?

I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into OS X Lion.
I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
What can I do? Can someone help?
Thanks

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Since updating to I.O.S7 on my ipad2 all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all?

all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resetting

Please see: http://support.apple.com/kb/HT1808 for further info. It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
Regards,
Steve

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs. can't get any further - Tried all suggestions like clearing browser caches but no change.
Got a couple of projects i wanted to try this on and if the software works I will probably take a subscription but considering this isn't working at all will look elsewhere.
Also - adobe live chat support is useless.

Hi,
please share the Adobe ID that you are using with DL-AdobeStory-support<at>adobe<dot>com and we will investigate the issue.
Thanks
Aurobinda

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off. Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes some

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mike

I'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!

I tried to update my iphone 4 to i07 but it's now just stuck at half way on the loading screen and I cannot get it to do anything

So like a moron, I made the mistake of finally updating my Iphone 4's OS to the new one that Apple has been bugging the crap out of me about for months now. The problem is, my phone is now stuck on the loading screen and I cannot get it to do *ANYTHING*. It won't connect to my PC, Itunes won't let me get on it without the pin lock being entered on the phone which I CANNOT do because the phone is stuck on the update screen.. and Apple won't talk to me for help because I cannot get them the serial number which I CANNOT do because my phone is stuck on the update screen!
Is there no way to just take the battery out or something? I looked for screws but they seem to be proprietary (because of course they are, because Apple) How do I force it to get off the update screen?!

If you open it to take out the battery from the iPhone then you forfeit all service for whatever reason from Apple in the future.
Have you attempt to connect it to your computer and then restore it from iTunes on your computer?

Deploy Library Loading Screen

Similar Messages

Maybe you are looking for