Deploy project to multiple servers

Hi,
Does anyone know if it is possible to deploy a process to multiple servers at once (from one central point)??
In our test environment we only have a few services running, but when we go live, this number would increase. Therefor it would be a time-saving point if we could impress our clients with such a reason.
Kind regards,
RenÃ©

I would implement such a deployment configuration using ant by extending the default build.xml generated by ant. ant has a lot of built-in task that can help with remote deployment. -Edwin

Similar Messages

Packaging and deploying jax ws (webservice) in multiple servers

I am a java developer and new to JAX-WS.
i got one requirement to create a web service using jax-ws, packaging using ant build and deploying it in JBOSS and WEBSPHERE server.
The process which i followed to create a web service below:
     1) created a web service class using @webservice annotation
     2) created a client side artifacts using wsimport which is provided by Jdk and created a war and deployed it jboss.
     3) wsdl is getting generated while deploying a war using a URI - (http://localhost:8080/mywebapplication/routing?wsdl)
     4) create client class to call the webservice. everything is working fine for me.
Need your expert input for the following below:
     1) if i write the ant build script to package the client stubs, how i can use wsdl location in wsimport ant task. should i use URI (wsdl="http://localhost:8080/mywebapplication/routing?wsdl") or
(wsdl="d:/route.wsdl")? which is the best practice?
     2) i want to deploy my webservice in JBOSS and WEBSPHERE in different machine and different port no?
     for e.g
*     http://ip1:port1/mywebapplication/route?wdl*
*     http://ip2:port2/mywebapplication/route?wdl*
*     http://ip3:port3/mywebapplication/route?wdl*
     how to mention dynamic ipaddress and port no while running ant build script?
     how to change the wsdl location and port number in generated wsdl and RoutingService client stubs class dynamically? (dont want to change soad address location manually)
*     Do i need to use wsgen to generate server stubs?*
*     Need your inputs in packaging and deploying jax ws in multiple servers.*
Thanks in advance.

how to change the wsdl location and port number in generated wsdl and RoutingService client stubs class dynamically? (dont want to change soad address location manually)
Your client stub should look like that...
<code>
@WebServiceClient(name = "MyClientStub", targetNamespace = "http://www.openuri.org/", wsdlLocation = "http://localhost:8080/MyClientStub/MyClientStubProxy/#%7Bhttp%3A%2F%2Fwww.openuri.org%2F%7DMyClientStub?wsdl")
public class MyClientStub
extends Service
public MyClientStub(URL wsdlLocation, QName serviceName) {
super(wsdlLocation, serviceName);
</code>
You can use the constructor above, like that...
<code>
URL baseUrl = MyClientStub.class.getResource(".");
URL url = new URL(baseUrl, "http://your-server:your-port-no/MyClientStub/MyClientStubProxy/#%7Bhttp%3A%2F%2Fwww.openuri.org%2F%7DMyClientStub?wsdl");
     MyClientStub stub = new MyClientStub(url, new QName("http://www.openuri.org/", "MyClientStub");
</code>

How to deploy the same WebService to multiple servers

Hi
I have to deploy the same webservice + its clients to multiple servers. However, the WS URL is hardcoded in its descriptor, as well as in the client, so it means that I have to rebuild everything each time I want to deploy it to a new server.
How can I set the URL dynamically at runtime?
Thanks a lot
Jean-Noel

Hi There,
I think what you can do is once you create your webservice , it has a property called
SOAP RPC URL which you can edit before you create the wsdl and the client.
Hope that helps
Kishore

Deploy project using sql query

hi
i am trying to deploy project in ssis catalog using below query.
Exec
catalog.deploy_project@folder_name
=@folder,@project_name
=@ProjectName,@Project_Stream
=@ProjectBinary,@operation_id
=@operation_id
out
getting error:
(1 row(s) affected)
Msg 27203, Level 16, State 1, Procedure deploy_project, Line 139
Failed to deploy project. For more information, query the operation_messages view for the operation identifier '51564'.
also when i m trying to opne ispac file , i am getting error :
TITLE: Failed to launch the wizard
To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server 2012 Standard, Enterprise, Developer, or Evaluation
Edition. To install a component, run SQL Server Setup and select the component name.
BUTTONS:
OK
is this 2 are related,how to solev it

Which version of SQL Server are you using? Are you deploying to a server with multiple instances of SQL Server installed? Are you deploying the packages to different server?
if so does the destination server has Integration services installed ?
Deploying from the command line. In most large organizations, deployments are done by a DBA or systems administrator. In such environments, it's a great practice to use deployment scripts as much as possible to make the deployments
more manageable as the number of SSIS packages increases. In SQL Server 2012, you can deploy SSIS packages using the command-line tool ISDeploymentWizard.exe. This tool works with the .ispac file, which is created in the project's BIN directory when you build
the project in SQL Server Data Tools. The .ispac file for a project typically contains the following:
The project's manifest
All the packages belonging to the project
The parameter file (Project.params)
If you want to see the file's contents, you can change the extension from .ispac to .zip, then open it in Windows Explorer.
To deploy the Test_Project project from the command line, you first need to copy the .ispac file to a shared folder. Then, in a Windows command shell, navigate to the folder containing the .ispac file and execute this ISDeploymentWizard command:
"%ProgramFiles%\Microsoft SQL Server\110\DTS\Binn
\isdeploymentwizard.exe" /S /ST:File
/SP:Test_Project.ispac /DS:<SQL Server Instance Name>
/DP:/SSISDB/MyTest/Test_Project

Selective IP filtering for multiple servers in a domain?

Is it possible to have IP filtering on for certain servers in a
domain, and not for others?
This is the situation:
I am deploying two servers in mydomain, so let's call it serverA
and serverB. I want serverA to accept all connections while
serverB accepts connections only from certain IPs. I know you
can do IP filtering using SimpleConnectionFilter in the
"Connection Filter" option in Security->General tab of the Admin
console, but this turns on IP filtering for BOTH serverA and
serverB! How do I turn it on for one, and not the other? Any
help would be greatly appreciated. Thank you.
Leon

Hi,
Yes you can have muliple servers in a domain. You can create as many managed
servers as your hardware can handle. When you added the server, did you use the
startManagedWebLogic.sh (or .cmd) script to start the server. Once you do that,
you should see the server as running.
Hope this helps,
pat
"MS" <[email protected]> wrote:
>
Hello All,
Is it possible to have multiple servers in a domain?
When I add a new server, the State is reported in the weblogic console
as "UNKNOWN".
What does this mean?
rgds
MS

Using MDT and Thin installer on multiple servers

Is there a way to configure the thininstaller.exe.configuration to point to a dynamic path. We have multiple locations where MDT is deployed, and we don't want the PC to connect over our WAN links when the Thin Installer runs.
I thought I read somewhere that in the file I could do something like this:
<Default Gateway>
     <10.10.1.1=\\Location1\repository>
     <10.10.2.1=\\Location2\repository>
     <10.10.3.1=\\Location3\repository>
     <*.*.*.*=\\DefaultLocation\repository>
I checked the Integrating ThinkVantage Update and Retriever and ThinInstaller with MDT 2010, but the part that talks about configuring the file makes no mention of using multiple servers.
Thanks

There is not a mechansim as you describe built into ThinInstaller. There are, however, various ways you can invoke Thin Installer which might accommodate your end goal.
Usually people that have this need have some kind of data value on the target device that lets them know which repository they should be pulling from. Sometimes a network share is used and that share is established earlier in the deployment process to point to a local server. Sometimes an environment variable is used. The command line of ThinInstaller allows for you to specify the path to the repository at execution time. The calling of ThinInstaller can be performed by a script or cmd file that determines the correct repository path to pass to ThinInstaller.
You can find more details on controlling ThinInstaller in this document: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvsu4_mst_en.pdf
Without knowing a lot more details about your environment I'm not sure how to better guide you. You might try posting in the Enterprise / IT Management forum and see if any of the folks there have done this already.

Deploying Project Server 2013 to an Existing SharePoint 2013 Farm

We recently deployed the following for our new SharePoint 2013 farm:
2 SQL server (alwaysOn config)
2 application servers
2 WFE
1 SQL for Dedicated Search
2 WFE for Dedicated Search
2 Applications Servers for Dedicated Search.
After purchasing a company that uses Project 2013 heavily we are now looking at deploying Project 2013 using our new 2013 SharePoint farm. My question is what is the recommended additional servers that would needed to be deployed to the existing farm?
Thanks,
Ric

Ric,
It really depends on what your current dataset is, and what the load on your SharePoint Server/Project Server. Technically, Project Server can just sit on top of your WFE and App Servers for SharePoint. You do not need a complete separate server group
for Project Server alone, unless there is a special reason to do so.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

IDVD burning one project on multiple macs? where are project contents?

How do I burn one project on multiple macs? I have a idvd project I created in keynote, added music to it in Garageband, exported to quicktime, and now is in iDVD burning just fine. However I have tons of these dvd's to make, I would like to put all my mac's to work.
last night i tried to share the file, and it is just an alias when i drag it over from the macbook it was created on to my imac. the file says it is in use and locked, since the macbook that created it is burning it. If I wanted to brun on the imac, I had to wait until the macbook was done.
is there a way around this? What if I copied all files I used to make the idvd project to my imac or any computer i wanted to burn on? woudl it hen allow two macs to be burning the same project?
I figured I could do this just like on my PC, drag the file over and voila...no such luck, its like if i had dragged a shortcut over to another pc...if the first one is using the file, its locked. Basically how do i get to the actual contents of the project, so I can also bring them over and hopefully it will allow me to burn on multiple macs at the same time?
my next solution if that didn't work was to start copying dvd's using popcorn on the other macs while the macbook continues burning through idvd.
Any opinions on how i can duplicate a dvd fast...need alot of copies!

Also as to where the files are.
I-DVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as
having a server networked into your computer.)

How to set up Planning on Multiple Servers

Hi,
1) I am trying to install a Finance Planning application so that it runs on one Planning Web Server and the other operations Planning application on another Planning 9.3.1 web server. Is that possilbe?
2) May be unrelated question:
HP_Windows_Install.pdf has only a few lines explaining how to set up Planning on Multiple Servers. Is it as simple as that?
Here are the "few lines" from install.pdf:
Perform the same installation and configuration process on your secondary servers, making sure to choose
Planning Web Server component for any secondary server.
Make sure you select Reuse existing tables when prompted during the Configure a Database task
in the Configuration utility.

Tomcat.
But it will be nice to know the steps for Weblogic too - as Weblogic will be bundled "free" with future releases of Planning.

Managing multiple servers

Not sure what i am looking for at the moment but we have 6 * solaris 9 servers, 5 * solaris 10, about 30 zones and it's only going to get bigger.
it's become a real pain to manage(add,remove,keep track) users across multiple server/zones. How do other people go about managing multiple servers i for one don't want to log into each box/ zone and create a user accout which is currently what we do.
Guess what i am looking for is some way of managing all of our boxes from a central point.

Using a directory service like NIS or LDAP will allow user accounts for many hosts to be created and managed centrally. LDAP is what Active Directory is based on. Sun's implementation is called iPlanet. Sun One Directory Server, or Java Directory service, depending on the phases of the moon.
For spotting problems on servers (disk full, host down, &c), we use nagios. It's fantastic.
My employer also spent a good deal of money on opsware, but shall we say the benefits of it are not yet obvious.

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

How to get the list of deployed projects in OSB through commond line

How to get the list of deployed projects in OSB through commond line; as we are able to get in weblogic.

You can go with standard JMX API using WLST
http://www.oracle.com/technology/sample_code/products/osb/index.html
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/index.html
or you can try a little bit tricky way like
ls $DOMAIN_HOME/osb/config/core/ | grep -v ^_:-)

Folder Comparison from multiple servers

I need to compare folders from multiple servers which do not have direct connection so i was trying to generate a text file with command dir /b /s >c:\server1.txt and feed them to script to compare.
my desired output is csv file in the following format
File name,Server1,server2,server3,is it missng file?
File1,yes,yes,yes,No
file2,Yes,Yes,No,Yes
File3,Yes,No,Yes,Yes
File4,No,Yes,Yes,Yes
these folders contains few hundred thousand files and the script is taking 4 to 5 hours to run the comparison. i thought threads will help to run fast using parallel processng but did not help. i have no expreience with threads and after searching for examples
and implementing it was even slower than normal.
i probably am doing something wrong. Any help is much appreciated.
The following is the script so far and it works fine but its taking long time.
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$list.count
$index = 0
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
write-host $listfilename
#$StrContent = get-content $listfilename
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$StrContent.count
$contentArray[$index].count
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist + $contentArray[$i]
$allfileslist.count
$uniquefileslist = $allfileslist | sort-object | get-unique
$Stroutline = "File Name,"
foreach($srvlistitem in $srvlist){
$Stroutline = $Stroutline + $srvlistitem.ToUpper() + ","
$Stroutline = $Stroutline + "Is it Missing file?"
Write-Output $Stroutline | Out-File "$reportName" -Force
foreach($uniquefileslistitem in $uniquefileslist){
$Stroutline = ""
$missingfile = "No"
$Stroutline = $uniquefileslistitem + ","
for($i=0;$i -lt $index;$i++){
if($contentArray[$i] -contains $uniquefileslistitem){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
Write-Output $Stroutline | Out-File "$reportName" -Force -Append
$j++
Following is the script i modified using threads example. this is running even slower.
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$list.count
$index = 0
#$contentArray = New-Object 'object[,]' $xDim, $yDim
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
write-host $listfilename
#$StrContent = get-content $listfilename
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$StrContent.count
$contentArray[$index].count
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist+ $contentArray[$i]
$allfileslist.count
#$uniquefileslist = $allfileslist | select –unique
get-date
$uniquefileslist = $allfileslist | sort-object | get-unique
$uniquefileslist.count
get-date
$Stroutline = "File Name,"
foreach($srvlistitem in $srvlist){
$Stroutline = $Stroutline + $srvlistitem.ToUpper() + ","
$Stroutline = $Stroutline + "Is it Missing file?"
Write-Output $Stroutline | Out-File "$reportName" -Force
$j = 1
$count = $uniquefileslist.count
$stroutput = ""
$maxConcurrent = 50
$results= ""
$PauseTime = 1
$uniquefileslist | %{
while ((Get-Job -State Running).Count -ge $maxConcurrent) {Start-Sleep -seconds $PauseTime}
$job = start-job -argumentList $_,$contentArray,$index -scriptblock {
$StrArgFileName = $args[0]
$ArgContentArray = $args[1]
$ArgIndex = $args[2]
$Stroutline = ""
$missingfile = "No"
$Stroutline = $StrArgFileName + ","
for($i=0;$i -lt $ArgIndex;$i++){
if($ArgContentArray[$i] -contains $StrArgFileName){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
$Stroutline
While (Get-Job -State "Running")
Start-Sleep 1
$results = Get-Job | Receive-Job
$results
$stroutput = $stroutput + "`n" + $results
Remove-Job *
Write-Output $stroutput | Out-File "$reportName" -Force -Append
Thank you very much!
Vamsi.

no i am not comparing the number of lines.. count i used was only for my information... it has nothing to do with the compare. here is the script with out count...
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$index = 0
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist+ $contentArray[$i]
$uniquefileslist = $allfileslist | sort-object | get-unique
$strfinal = "File Name,"
foreach($srvlistitem in $srvlist){
$strfinal = $strfinal + $srvlistitem.ToUpper() + ","
$strfinal = $strfinal + "Is it Missing file?"
foreach($uniquefileslistitem in $uniquefileslist){
$missingfile = "No"
$Stroutline = $uniquefileslistitem + ","
for($i=0;$i -lt $index;$i++){
if($contentArray[$i] -contains $uniquefileslistitem){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
$strfinal = $strfinal + "`n" + $Stroutline
Write-Output $strfinal | Out-File "$reportName" -Force -Append
if you want to test it... just create two text files and put them in the same folder as the script.
server1.txt will have the following content
filename1
filename2
filename3
server2.txt will have the following content
filename1
filename2
filename4
it should generate the csv file ComparisonReport3.csv
filename,server1,server2,Is it Missing file?
filename1,yes,yes,no
filename2,yes,yes,no
filename3,yes,no,yes
filename4,no,yes,yes

Multiple Servers for Development Team in WLI2.1 on wlidomain

Has anyone tried to create multiple servers so that a development team can share
the resources of a domain with WLI 2.1? If so, how did it work. I have done this
with WLS but would like to try it with WLI.
I tried to create multiple servers, but, had difficulty as there seems to many
resources that are tied to the server name and default port. Also, I tried to
change the port and that caused alot of problems on the myserver.

Thanks John.
I was not looking for something which is scaling out Hyperion Planning(via load balancer)/Horizontal clustering.
But was looking for some thing like Vertical clustering(multiple JVMs/nodes of Hyperion Planning within a single planning server) which was applicable in 11.1.1.3.
Came to know that with 11.1.2.2 vertical clustering not more supported.
Thanks

Multiple servers to one APEX install.

At the moment, I'm in the position of having APEX running on the site using the internal Oracle server. This was the initial plan as there aren't many IT resources on site, so maintaining the more complex setups was not really an option. However, I'd like to spend a little time investigating the Apache based setup and especially the APEX Listener (as that sounds as though it'll end up supporting NTLM).
The question is, is it possible to have multiple servers, all connected to the APEX install, serving correctly (spotting subtle issues would probably be beyond my ability to spot quickly)?
The aim for this is to find a method of running multiple access methods simultaneously, enabling efficient migration from one to another should the benefits of running with a particular method (such as APEX Listener) become overwhelmingly strong.

James,
yes, no problem, you can run multiple different connection methods (apex listener, mod_plsql, epg) parallel.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at
Training: http://www.click-click.at/apex-4-0-workshops

Deploy project to multiple servers

Similar Messages

Maybe you are looking for