Deployed application can't see the JDBC connection

Hi
I made an ADF application using oracle JDeveloper 11g and it ran successfully from the JDeveloper
I deployed it to Weblogic 10.3 and it successfully deployed
But when i Opened the deployed application's URL the page's lay out is only what i c (only the template) with the following error:
=================================================
Error while opening JDBC connection.
ORA-01005: null password given; logon denied
Unexpected exception caught: java.lang.NullPointerException, msg=null
=================================================
SO, how could I make my application c the JDBC ?
by the way when i created the DB connection in the JDeveloper i checked(deploy password)

Hi Eddy
I got the same problemas you posted.now i changed the configurations of AMlocal.i changed from JDBC URL to JDBC datasource.
i saved the changes. i created a new EAR and deployed to external WLS 10.3 from Jdev11.1.1
when i am testing tha app from external WLS,i am getting the following error
JNDI failure.unable to lookup DataSource at context
java:comp/env/jdbc/Connection1DS
while trying to lookup'jdbc.Connectiobb1DS' didn't find
subcontext 'jdbc'.Resolved"
Unexpected exception caught:
java.lang.NullpointerException,msg=null
Can you tell me where the problem is?

Similar Messages

Computers can't see the disk connected to my Aiport Extreme

Hi everyone,
I have an Airport Extreme with version 7.3.2 and I just attached a Western Digital external hard drive to the usb port in the back of the router; however, none of my computers can see the disk in the network screen nor the airport router itself. Does anyone know how I can fix this so that I can share the disk with all of my computers?
This is how my network is set up:
I have six computers connected to a Linksys WRT310N wireless router (some with ethernet cables, others wireless). Then, I have the Airport Extreme, in bridge mode, connected to the Linksys router by an ethernet cable. And the external disk is attached to the Airport Extreme.
It sounds complicated, but I talked to an Apple "Genius" a while back and he told me that only Mac computers are able to see the disk through the Time Machine program. That hardly seems right or fair to me.
Thanks for your help!

On July 15, 2008 someone posted this: "On my air port extreme I have a 160 Gb hard drive connected to the usb. And suddenly it cant find it on my desktop. But when I go to my lap top it finds it just like that. Im runnin the airport 10/100 ethernet to my desktop and 802.11 n/g on my lap top. I tried resetting..."
This is identical to my problem, the hard disk that is connected to the Airport Extreme shows up on the old iBook but not on the MacBook Pro. Both are running OS 10.4.11. It worked fine when it was connected directly to the MacBook Pro and contains the same files it held then.
Can anyone answer this problem?

My app can't see the tag library

Hi everybody,
I am developing an application in JSP which accesses an Oracle database and display the results to the user.
I am using the tag "exceltag.jar" taken from "http://www.servletsuite.com/servlets/exceltag.htm" to convert an html table to an excel sheet. This works fine on my computer but it fails after we installed the application to our web server, running Tomcat 4.1.12.
The "exceltag.jar" file has been placed under 'WEB-INF\lib' and the classpath has been set to point to that location. However when I attempt to convert the html table to an excel sheet by clicking a button, I get the following error:
java.lang.NoClassDefFoundError:
javax/servlet/jsp/tagext/BodyTagSupport at java.lang.ClassLoader.defineClass0(Native Method) at
java.lang.ClassLoader.defineClass(ClassLoader.java:509)
It seems like the application can't see the "exceltag.jar" file.
What do I need to do to overcome this problem?
Thank you very much.

The servlet.jar is in TOMCAT_HOME/common/lib. Since all the JARs in that directory are automatically added to the CLASSPATH and are visible to all applications running under Tomcat, you don't have to do anything for the class loader to find it.
Your app's WEB-INF/lib directory JARs are also automatically added to to the CLASSPATH. That's the correct place to put that exceltag.jar, by the way, not the TOMCAT_HOME/common/lib.
As a matter of fact, if you have a system CLASSPATH, be sure that Tomcat ignores it completely. You shouldn't even have one, IMO. (I don't.)
When I open up the servlet.jar in my TOMCAT_H0ME/common/lib, I can see a class named BodyTagSupport with path javax.servlet.jsp.tagext. You should, too.
In your exceltag.jar, you should find a TLD for the library. Open that with a text editor and make sure that the text under the <uri> tag matches that in your JSP. For example, I use the JSTL tag library. The c.tld has this <uri> tag:
<uri>http://java.sun.com/jstl/core</uri>My JSPs that want to use the core tag library have this near the top of the page:
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>Notice how the URIs match. That's what yours should do, too.
If you don't find a TLD inside the exceltag.jar, that means they didn't package it properly. - MOD

HT3258 after transferring data from old mac to new mac, I can't see the transfer files and application on new mac.?

How can I see the data and application that I transferred from Old Mac to New Mac?
Transfer of all the files and application was successful but I can't see it on the New Mac.
Help.

Thanks for your reply
I did reboot the system.
still can't see new user.
One thing though when the system finished transferring the files
at the end a message came up
" 2013-09-11 04:18:05 +0000 Paul Nirwan could not be created.
I did the transfer two times, same thing. first time I used the WiFi
and second time from my back up disk with USB connection, using Migration Assistant.
Second time also said that Paul'Mac already exist, Paul'Mac 2 created.
How can I get rid of first data trasnferred?
It will be using too much space on hard drive if Ileave it therre.

Itunes can't see the Airport Express that I'm connecting to... Wierd

I have my AE set up as a WAP on an ethernet system. I have iTunes over ethernet selected, but now my wireless box can't see the AE even though I'm sending this note over the AE. Does selecting iTunes over ethernet disable the iTunes over wireless?
The AE is connected to a router, so it is not distributing IP addresses.
I guess that I should also mention that it's preventing me from seeing other machines on the network and sharing my library.
Help??

Unless you've explicitly disabled "Distribute IP addresses" using Airport Admin Utility, your Express is set up as a router and is distributing IP addresses, which is consistent with the fact that you can't see the other machines.

I can not see the PC I'm connected to over VPN in the MY Network tab.

Hi,
I have set up my incoming connection for my VPN
on a Windows 8.1 PC. I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
Any ideas on why I can not see the PC I'm connected to, in the (MY
Network) tab, would be much appreciated. Thanks

Hi Steve,
The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
Please check the following settings in the network and sharing center:
1.Check these settings in the Advanced sharing settings
“Turn on network discovery” and “turn on file and print sharing”
2.Ping the destination machine both with the IP address and the UNC to have a check .
Best regards

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa

HT4559 i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting notification

i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting>notification
how can i work with the facetime app??? plz reply me

FaceTime is not available in KSA or UAE.
See this -> http://support.apple.com/kb/HT1937

Can't see the "keynote" folder in application supports iwork

I'm trying to uninstall some purchased themes that I don't like. As instructed, I followed the path library>application supports>iwork>keynote>theme. However, I can't see the "keynote" folder, although I showed hidden files. There is only the "pages" folder in that "iwork" folder. Can anyone please help me out?

There are 3 Libraries on the computer. Go to Macintosh HD > Library > application support > iwork > Keynote > themes.

JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Hello Experts,
I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
Do someone encountered this before? Please help
Regards,
Alfred

Hello,
I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
Regards,
Alfred

Connected a usb HD to the new airport extreme 802.11ac; how can I see the HD on my iPad?

I just purchased and set up the 802.11ac airport extreme. I have connected an usb HD; I can see it from my iMac and my MacAir laptop. Can I see the connected HD from my iPad air 2?

You can, if you install an App like FileBrowser on the iPad. Info below:
Stratospherix - FileBrowser - Overview

TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I can't see the data logger to move a lookout application to another computer

To move a application to another PC i can't see historical logging why?
Attachments:
Toneleria15Jul02.rar ‏1424 KB
Toneleria15Jul02.r00 ‏818 KB

Claudio,
I'm not sure if I understand your question.
1) What version of Lookout are you using?
2) Are you using a server-client relationship and you can't see the data in your clients?
3) When you move your Lookout process, have you adjusted where to find your historical database (this can be set under File -> Modify Process or if you are using a hypertrend, you can make sure that your path is pointing to the appropriate location - under the trend properties).
Please give me a little more information and I will try to help you resolve this issue. Thanks.

Jambox had no problem to connect with iPhone 4 S but my new iphone 6 can not see the jambox. Any solution known?

I used my jambox with the iPhone4S via bluetooth without problems. Now i changed to the new iPhone 6 and the new phone can not see the jambox. Is that known and what solution is available?

Hey rjdit,
Thanks for the question. After reviewing your post, it sounds like you are having trouble connecting to 3rd party devices. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Bluetooth connections
iOS: Third-party Bluetooth accessories
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Deployed application can't see the JDBC connection

Similar Messages

Maybe you are looking for