Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

Hi All,
I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
There are no errors in the log regarding the deployment of the DC, or the scheduler task.
There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
But I still dont see the task listed in Global Services -> Scheduler Tasks.
Does anyone know what might be causing this or how to diagnose the problem further?
Cheers,
Steve

Hi Srini,
No it doesn't it just has the run method which is generated automatically.
I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
Has anyone out there got a working Scheduler Task in a Portal Application DC?
Cheers,
Steve

Similar Messages

Office 2013 C2R Update Scheduled Task does not work

Hi all.
I am having difficulty getting network deployed updates to work correctly. I installed and older version of Office 2013 with the ODT from a network share and set the update path. I then downloaded an update via ODT.
The issue is the scheduled task does not update office. If I trigger or manually run from a command prompt "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection modeargs reschedulemode tasktrigger
scheduledtask updateuitype background” from Task Scheduler nothing seems to happen. Monitoring Task Manager it looks like integratedoffice is called albeit very briefly.
But, if I run "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection background” from a command prompt Office updates, but if I edit the Scheduled Task to above Office does not update if the
task is triggered.
As Office can update if the right command is given it would appear that my config.xml etc is correct. Any ideas on why the Scheduled Task does not work?
Cheers
Jakes

What permissions are set on the location of the updates ? C2R currently needs permissions granted for machine accounts as it runs under that context. This will change at some point that C2R gets updated.

System Administration Operations Scheduled Backups does not appear in ACS 5.0.0.21

Hello!
I want to do shedule backup. According to user guide:
You can create a scheduled backup only for the primary instance. To create, duplicate, or edit a scheduled
backup:
Step 1 Choose System Administration > Operations > Scheduled Backups.
But System Administration > Operations > Scheduled Backups does not appear in ACS 5.0.0.21.
How can i do backup ?

Hi Alexander,
Could you please confirm on which link you found these instructions?
It looks like these are the instructions from the ACS 5.1 user guide, but on ACS 5.0 we don't have a similar option.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Scheduled job does not stop even after the scheduling window closes

We have written custom stats gathering job whose duration has been set as 14 hours in the schedule. This job starts daily at 6:00 PM and expected to complete upto 8:00 AM next day. But the problem is that this job continues to execute even after 14 hours. If we look at the dba_scheduler_job_run_details table, then its execution duration is about 16 - 19 hours daily. We could not understand as why it is not closed when scheduling window closes? Is there any problem with the scheduler configuration?
select job_name
      ,program_name
      ,schedule_name
      ,schedule_type
      ,stop_on_window_close
from dba_scheduler_jobs
where job_name = 'GATHER_STATS_STD_JOB';
Output:
JOB_NAME
PROGRAM_NAME
SCHEDULE_NAME
SCHEDULE_TYPE
STOP_ON_WINDOW_CLOSE
GATHER_STATS_STD_JOB
GATHER_STATS_STD_PROGRAM
GATHER_STATS_STD_SCHEDULE
NAMED
TRUE
SELECT window_name
      ,schedule_owner
      ,schedule_name
      ,schedule_type
      ,start_date
      ,repeat_interval
      ,end_date
      ,duration
      ,window_priority
      ,next_start_date
      ,last_start_date
      ,enabled
      ,active
FROM dba_scheduler_windows;
window_name
schedule_owner
schedule_name
schedule_type
start_date
repeat_interval
end_date
duration
window_priority
next_start_date
last_start_date
enabled
active
GATHER_STATS_STD_WINDOW
sys
GATHER_STATS_STD_SCHEDULE
named
+00 14:00:00.000000
high
23-feb-15 06.00.10.000000 pm +02:00
23-feb-15 06.00.10.095878 pm +02:00
TRUE
TRUE
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod on Linux platform.
Message was edited by: Moazzam

Straight out of the docs 83 DBMS_SCHEDULER
stop_on_window_close
This attribute only applies if the schedule of a job is a window or a window group. Setting this attribute to TRUE implies that the job should be stopped once the associated window is closed. The job is stopped using the stop_job procedure with force set to FALSE.
Having said that, stop_job with force applies to whether information about the job is gathered - you would have to test, but I believe that the statistics gather will be terminated in the middle of whatever it's doing.
Update: force says:
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOBwith force set to FALSE has failed.

Why new Spacer Item cretaed through personalization does not appear in SSHR

SR # 6987444.993
Customer : VIRGIN ATLANTIC LIMITED
RELEASE : 11.5.10 CU 2
Patchset: FP K RUP 2
A Space Item created through Self Service Personalization Does Not Appear in Self Service HRMS Page.
Responsibility : Employee Self-Service
Click on "Personal Information".
Navigate to : Personal Details Region
Click on : "Personalize Basic Details" hyperlink.
In the "Personalize Region : Basic Details" page that opens, in the
Personalize Structure Region : "Complete View" option button is enabled.
In the Style column choose the Value : Default Single Column
Click on "Go" button.
Corresponding to : Default Single Column: Basic Details, Click on "Create Item" icon.
In the "Create Item" page that opens, choose : Level: Function: Personal Information
Item Style : Spacer
ID : Vishu
Admin Personaliation : True
Height : 30
Width : 10
Click on "Apply" button.
Click on "Return to Application".
Simulated in CELALNX10 and crm-au-r12 instance but in both the instances the Spacer items is not appearing.
Does the information specified in Note # 236618.1 - OA Framework Personalization and Extensibility Guide: Version 5.7+
under the Section : Create/Update View Page
is related to this?

Check that you have specified the HEIGHT and WIDTH properties of the spacer!
Also, you have created an item, but make sure that it is RENDERED=TRUE at the personalisation level for your responsibility.
It is good prectice to create an item and render it FALSE. Then go to the specific personalisation level you require and set RENDER=TRUE.
Also, there is a better document than the one you refer to. Try looking at MetaLink document id 268969.1 - Oracle Framework Personalization Guide (OA Framework 11.5.10).
Let me know if that helps.
Regards
Tim

Firefox runs in background (appear in Task Manager Processes Tab) only and does not appear on Desktop

I have been using Firefox on my Desktop PC with Windows XP for a long time. However, today possibly due to some virus (I attached an infected flash drive to my PC) a suspicious change in homepage (www.delta-homes.com) of my firefox occurred. Simultaneously an error message of "WinZip" appeared on screen. I figured that there must be some software in "C:\Program Files\" which is also causing problem to my firefox. I opened Program Files and removed that folder named WinZip. (Tried to uninstall it but it won't happen so I had to use "Unlocker" to kill processes this folder was associated with and then deleted the folder.)
From that point onward, My FireFox started to behave weird. Whenever I click on Firefox icon or access firefox.exe from any source (start menu, quick launch, program files, Run Command), it starts but appears only in "Task Manager Processes Tab". In that Processes Tab, firefox.exe is continuously using 50% of CPU but it does not appear on Desktop at all.
To go a step further, I uninstalled firefox and tried to re-download from Firefox official website but the download fails in the start saying "Download is interrupted". (See attached Image). So I downloaded a previous version of Firefox (v 34.0) from www.filehippo.com and installed it but the same problem is happening with this version too.
I am confused and surprised what might be causing this problem. Everything else on PC running fine. Kindly help me restore my Firefox so that I may not lose any precious Bookmarks, Settings and other Data. thanks

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Firefox does not appear on screen when started from the start menu, but task manager says the process is running

Firefox does not appear on screen when started from the start menu or the shortcuts, but task manager says the process is running.

No - I get the message basically saying "Can't run program while Firefox is running. Please close down Firefox & try again".
I rebooted my computer and it all works now - but that's weird it was happening before. Kinda weirded out that it happened at all.
To avoid that happening again, I still wanna know what to do to avoid it or fix it for next time. Thanks

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

XML document does not appear to contain a properly formed DOCTYPE header

Hi,
I've created an ejb which uses the studio API to start/execute etc the workflow
tasks in a generic way. The same ejb contain certain method which I want to use
as business operations in my workflows. However, when I deploy this ejb as a separate
application by putting the required jar files in class path it works fine, but
when I deploy it as a part of WLI application for accessing the business operations
in workflow I'm getting the following error. I'm entering ejbcomponent entry under
the wli application tag of config.xml and putting the jar file in the lib directory
where other jar files are placed. I couldn't understand the reason why it is failing
when I deploy it as a part of WLI application and not when I deploy it independently.
Module Name: TestWLPI, Error: The XML parser encountered an error in your deployment
descriptor. Please ensure that your DOCTYPE is correct. You may wish to compa
re your deployment descriptors with the WebLogic Server examples to ensure the
format is correct. The error was:
weblogic.xml.process.ProcessorFactoryException: XML document does not appear to
contain a properly formed DOCTYPE header
at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:281)
at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:224)
at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:267)
at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:242)
at weblogic.ejb20.dd.xml.DDUtils.processAltDD(DDUtils.java:220)
at weblogic.ejb20.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:102)
at weblogic.ejb20.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:500)
at weblogic.ejb20.deployer.EJBModule.loadDescriptor(EJBModule.java:207)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:714)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:555)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:458)
at weblogic.management.deploy.slave.SlaveDeployer.prepareAllStagedApplications(SlaveDeployer.java:490)
at weblogic.management.deploy.slave.SlaveDeployer.initialize(SlaveDeployer.java:253)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.initialize(DeploymentManagerServerLifeCycleImpl.java:150)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)

javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:49)
at weblogic.application.descriptor.BasicMunger2.<init>(BasicMunger2.java:110)
at weblogic.application.descriptor.BasicMunger2.<init>(BasicMunger2.java:128)
at weblogic.application.descriptor.VersionMunger.<init>(VersionMunger.java:74)
at weblogic.application.descriptor.VersionMunger.<init>(VersionMunger.java:63)
at weblogic.servlet.internal.WlsWebAppReader2.<init>(WlsWebAppReader2.java:59)
at weblogic.servlet.internal.WebAppDescriptor$MyWlsWebAppDescriptor.createXMLStreamReader(WebAppDescriptor.java:316)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:402)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
Any Suggestions plz???
Thanks

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

IPhone Does Not Appear in iTunes

Hi! My iPhone 3GS does not appear in iTunes. It is recognised by Windows. It is recognised by iTunes in my desktop PC, but the problem is when I use my Samsung NC10 portable notebook.
I am using Windows XP Home, version 2002, with SP3.
iTunes is version 9.2.0.61
So far I have followed suggestions in:
http://support.apple.com/kb/TS1495
including re-installing iTunes, resetting iPhone, checking that required services are running, stopping & starting services. I have used msconfig to see if I couls identify any conflicts but no success.
I used iTunes diagnostics, and it answered "no iPhone, iPad, iPod found"
I DO get an error when I start iTunes:
"The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please re-install iTunes" However, the Samsung NC10 does not have a CD/DVD drive, so I am assuming this is the cause of this error.
The iTunes diagnostic outut is as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
SAMSUNG ELECTRONICS CO., LTD. NC10
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver not found.
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 826FB*285
Current user is an administrator.
The current local date and time is 2010-06-24 13:20:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Mobile Intel(R) 945 Express Chipset Family
Mobile Intel(R) 945 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {3611518A-4590-4E1E-AE70-A94755E86674}
Description: Atheros AR5007EG Wireless Network Adapter - Packet Scheduler Miniport
IP Address: 192.168.0.108
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 24 09:39:01 2010
Lease Expires: Thu Jul 01 09:39:01 2010
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple website was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-23 15:17:47.
** Device Connectivity Tests **
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
5th Generation iPod (iPod with video) running firmware version 1.3
Serial Number: 9C643*V9M
<Edited by Host>

I have a netbook toshiba a ipad and a iphone 3gs. And sudanly aparantly without reason, they stopped appearing in itunes. I tried everything in the manuals and nothing. THEN by chance I notice that a have a sdcard adapter inserted BUT without the micro SD inside it. I removed the sd adapter and , miracle when I conected the iphone, IT works allright.
I hope IT works for you guys

MiniTOC does not appear in translated source file

RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>

The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

"This file does not appear to be a Photoshop file"

Ok, I used the first edition of Encore in the past, but I just installed the version that came with Premiere CS3. I used Photoshop 6.0 to do my menus in the past, but just installed the trial of Photoshop CS3.
Two things:
My old menus I created in Photoshop 6.0 won't import into the new Encore.
The new menus (I opened my old menus with CS3 and saved them out.) won't import into Encore either. In both cases, Encore says:
"This file does not appear to be a photoshop file."
The files are indeed all photoshop .PSD files and the Photoshop 6.0 files are actually menu files that were in the same .ncor project I used on the old Encore and opened on the new one.
Why won't Encore read these?
Thanks!

Bummer,
I hoped that I had helped.
Let's play 20 Questions:
The PSD files were originally created in PS 6, and you have Opened them in PS-CS3, from which they were Saved. Correct?
Did CS3 throw any error messages?
You state that they were Menus in Encore. Which version, and did they function perfectly there?
I assume that when used in a previous ver. of Encore, they did function, but now you have Opened, worked on and Saved from PS-CS3. What changes were made?
Was the Color Mode, or Bit-Depth changed, or were Alpha Channels introduced?
Has your OS been changed?
Will these files still Open fine in PS-CS3?
I'm trying to find the point that they ceased to Import, as they should and find out what might have changed with them. You might want to do a bit of a timeline on the life of these files, i.e. 1.) created in PS6. 2.) used as Menus in Encore2. 3.) Opened and changed in PS-CS3 by doing X. 4.) Saved out as PSDs and attempted to Import into Encore CS3 with above error message...
Something has to have changed, and the task is to find out what that is/was.
Hunt

Acrobat 9 Professional Does not Appear in the Programs list

One of our users does have Acrobat installed, and can open and use it. However, the shortcut that is in his start menu brings up the Installer. Acrobat does not appear in the installed prograns list in Programs and Features (WIN7). I don't see an Adobe group in the start menu, or when searching the task-bar. the Desktop shortcut links to the correct folder/acrobat.exe.
Any reason why this program would NOT show up as having been installed, when it very clearly IS installed and working correctly?
(Also, not sure if I'm in the right 'community', please redirect me if i'm in error.)
thanks everybody,

Hi Gabriel,
Please try repairing Acrobat from the 'Help' menu and check.
Also check if Acrobat has been updated to the latest patch i.e. v9.5.5
Regards,
Rave

Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

Similar Messages

Maybe you are looking for